We expected the 'version' ID to match the board processor ID,
but this is not always true (for example boards with revision
id 0xa02042/0xa22042 are Raspberry Pi 2 with a BCM2837 SoC).
This was not important because we were not modelling them, but
since the recent refactor now allow to model these boards, it
is safer to check the processor id directly. Remove the version
check.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The firmware load address depends on the SoC ("processor id") used,
not on the version of the board.
Suggested-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we only support a reduced set of the REV_CODE_PROCESSOR id
encoded in the board revision, define the PROCESSOR_ID values
as an enum. We can simplify the board_soc_type and cores_count
methods.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we can instantiate different machines based on their
board_rev register value, we can have various raspi2 and raspi3.
In commit fc78a990ec we corrected the machine description.
Correct the machine names too. For backward compatibility, add
an alias to the previous generic name.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using class_data pointer to create a MachineClass is not
the recommended way anymore. The correct way is to open-code
the MachineClass::fields in the class_init() method.
We can not use TYPE_RASPI_MACHINE::class_base_init() because
it is called *before* each machine class_init(), therefore the
board_rev field is not populated. We have to manually call
raspi_machine_class_common_init() for each machine.
This partly reverts commit a03bde3674.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The arm_boot_info structure belong to the machine,
move it to RaspiMachineState.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'first_cpu' is more a QEMU accelerator-related concept
than a variable the machine requires to use.
Since the machine is aware of its CPUs, directly use the
first one to load the firmware.
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Display the board revision in the machine description.
Before:
$ qemu-system-aarch64 -M help | fgrep raspi
raspi2 Raspberry Pi 2B
raspi3 Raspberry Pi 3B
After:
raspi2 Raspberry Pi 2B (revision 1.1)
raspi3 Raspberry Pi 3B (revision 1.2)
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1c3db49d39 added the raspi3, which uses the same peripherals
than the raspi2 (but with different ARM cores). The raspi3 was
introduced without the ignore_memory_transaction_failures flag.
Almost 2 years later, the machine is usable running U-Boot and
Linux.
In commit 00cbd5bd74 we mapped a lot of unimplemented devices,
commit d442d95f added thermal block and commit 0e5bbd7406 the
system timer.
As we are happy with the raspi3, let's remove this flag on the
raspi2.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200921034729.432931-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
The license is the 'GNU General Public License v2.0 or later',
not 'and':
This program is free software; you can redistribute it and/ori
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
Fix the license comment.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-30-imammedo@redhat.com>
The count of ARM cores is encoded in the board revision. Add a
helper to extract the number of cores, and use it. This will be
helpful when we add the Raspi0/1 that have a single core.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-14-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Igor]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the exception of the ignore_memory_transaction_failures
flag set for the raspi2, both machine_class_init() methods
are now identical. Merge them to keep a unique method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-13-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the model type. Add a helper
to extract the model, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-12-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We added a helper to extract the RAM size from the board
revision, and made board_rev a field of RaspiMachineClass.
The class_init() can now use the helper to extract from the
board revision the board-specific amount of RAM.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-11-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
raspi_machine_init() access to board_rev via RaspiMachineClass.
raspi2_init() and raspi3_init() do nothing. Call raspi_machine_init
directly.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to have a common class_init(). The only value that
matters (and changes) is the board revision.
Pass the board_rev as class_data to class_init().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM'ify RaspiMachineState. Now machines inherit of RaspiMachineClass.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-8-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no point in creating the SoC object before allocating the RAM.
Move the call to keep all the SoC-related calls together.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200208165645.15657-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the processor type. Add a helper
to extract the type, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the amount of RAM. Add a helper
to extract the RAM size, and use it.
Since the amount of RAM is fixed (it is impossible to physically
modify to have more or less RAM), do not allow sizes different
than the one anounced by the manufacturer.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The board revision encode the board version. Add a helper
to extract the version, and use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We hardcode the board revision as 0xa21041 for the raspi2, and
0xa02082 for the raspi3:
166 static void raspi_init(MachineState *machine, int version)
167 {
...
194 int board_rev = version == 3 ? 0xa02082 : 0xa21041;
These revision codes are for the 2B and 3B models, see:
https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
Correct the board description.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200208165645.15657-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting without device tree, the Linux kernels uses the $R1
register to determine the machine type. The list of values is
registered at [1].
There are two entries for the Raspberry Pi:
- https://www.arm.linux.org.uk/developer/machines/list.php?mid=3138
name: MACH_TYPE_BCM2708
value: 0xc42 (3138)
status: Active, not mainlined
date: 15 Oct 2010
- https://www.arm.linux.org.uk/developer/machines/list.php?mid=4828
name: MACH_TYPE_BCM2835
value: 4828
status: Active, mainlined
date: 6 Dec 2013
QEMU always used the non-mainlined type MACH_TYPE_BCM2708.
The value 0xc43 is registered to 'MX51_GGC' (processor i.MX51), and
0xc44 to 'Western Digital Sharespace NAS' (processor Marvell 88F5182).
The Raspberry Pi foundation bootloader only sets the BCM2708 machine
type, see [2] or [3]:
133 9:
134 mov r0, #0
135 ldr r1, =3138 @ BCM2708 machine id
136 ldr r2, atags @ ATAGS
137 bx r4
U-Boot only uses MACH_TYPE_BCM2708 (see [4]):
25 /*
26 * 2835 is a SKU in a series for which the 2708 is the first or primary SoC,
27 * so 2708 has historically been used rather than a dedicated 2835 ID.
28 *
29 * We don't define a machine type for bcm2709/bcm2836 since the RPi Foundation
30 * chose to use someone else's previously registered machine ID (3139, MX51_GGC)
31 * rather than obtaining a valid ID:-/
32 *
33 * For the bcm2837, hopefully a machine type is not needed, since everything
34 * is DT.
35 */
While the definition MACH_BCM2709 with value 0xc43 was introduced in
a commit described "Add 2709 platform for Raspberry Pi 2" out of the
mainline Linux kernel, it does not seem used, and the platform is
introduced with Device Tree support anyway (see [5] and [6]).
Remove the unused values (0xc43 introduced in commit 1df7d1f930
"raspi: add raspberry pi 2 machine" and 0xc44 in commit bade58166f
"raspi: Raspberry Pi 3 support"), keeping only MACH_TYPE_BCM2708.
[1] https://www.arm.linux.org.uk/developer/machines/
[2] https://github.com/raspberrypi/tools/blob/920c7ed2e/armstubs/armstub7.S#L135
[3] https://github.com/raspberrypi/tools/blob/49719d554/armstubs/armstub7.S#L64
[4] https://gitlab.denx.de/u-boot/u-boot/blob/v2015.04/include/configs/rpi-common.h#L18
[5] https://github.com/raspberrypi/linux/commit/d9fac63adac#diff-6722037d79570df5b392a49e0e006573R526
[6] http://lists.infradead.org/pipermail/linux-rpi-kernel/2015-February/001268.html
Cc: Zoltán Baldaszti <bztemail@gmail.com>
Cc: Pekka Enberg <penberg@iki.fi>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Kshitij Soni <kshitij.soni@broadcom.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200208165645.15657-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we enabled parallel TCG code generation for softmmu (see
commit 3468b59 "tcg: enable multiple TCG contexts in softmmu")
and its subsequent fix (commit 72649619 "add .min_cpus and
.default_cpus fields to machine_class"), the raspi machines are
restricted to always use their 4 cores:
See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4):
222 static void raspi2_machine_init(MachineClass *mc)
223 {
224 mc->desc = "Raspberry Pi 2";
230 mc->max_cpus = BCM283X_NCPUS;
231 mc->min_cpus = BCM283X_NCPUS;
232 mc->default_cpus = BCM283X_NCPUS;
235 };
236 DEFINE_MACHINE("raspi2", raspi2_machine_init)
We can no longer use the -smp option, as we get:
$ qemu-system-arm -M raspi2 -smp 1
qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4
Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp,
remove the unuseful code.
We can achieve the same by using the '-global bcm2836.enabled-cpus=1'
option.
Reported-by: Laurent Bonnans <laurent.bonnans@here.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200120235159.18510-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
write_secondary_boot() is used in SMP configurations where the
CPU address space might not be the main System Bus.
The rom_add_blob_fixed_as() function allow us to specify an
address space. Use it to write each boot blob in the corresponding
CPU address space.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-11-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
IEC binary prefixes ease code review: the unit is explicit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20190926173428.10713-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In struct arm_boot_info, kernel_filename, initrd_filename and
kernel_cmdline are copied from from MachineState. This patch add
MachineState as a parameter into arm_load_dtb() and move the copy chunk
of kernel_filename, initrd_filename and kernel_cmdline into
arm_load_kernel().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liu Jingqi <jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190809065731.9097-2-tao3.xu@intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Cédric Le Goater <clg@kaod.org>
[ehabkost: include hw/boards.h again to fix build failures]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The global smp variables in arm are replaced with smp machine properties.
The init_cpus() and *_create_rpu() are refactored to pass MachineState.
A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-9-like.xu@linux.intel.com>
[ehabkost: Fix hw/arm/sbsa-ref.c and hw/arm/aspeed.c]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
As explained in commit aff39be0ed97:
Both functions, object_initialize() and object_property_add_child()
increase the reference counter of the new object, so one of the
references has to be dropped afterwards to get the reference
counting right. Otherwise the child object will not be properly
cleaned up when the parent gets destroyed.
Thus let's use now object_initialize_child() instead to get the
reference counting here right.
This patch was generated using the following Coccinelle script
(with a bit of manual fix-up for overly long lines):
@use_object_initialize_child@
expression parent_obj;
expression child_ptr;
expression child_name;
expression child_type;
expression child_size;
expression errp;
@@
(
- object_initialize(child_ptr, child_size, child_type);
+ object_initialize_child(parent_obj, child_name, child_ptr, child_size,
+ child_type, &error_abort, NULL);
... when != parent_obj
- object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL);
...
?- object_unref(OBJECT(child_ptr));
|
- object_initialize(child_ptr, child_size, child_type);
+ object_initialize_child(parent_obj, child_name, child_ptr, child_size,
+ child_type, errp, NULL);
... when != parent_obj
- object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp);
...
?- object_unref(OBJECT(child_ptr));
)
@use_sysbus_init_child_obj@
expression parent_obj;
expression dev;
expression child_ptr;
expression child_name;
expression child_type;
expression child_size;
expression errp;
@@
(
- object_initialize_child(parent_obj, child_name, child_ptr, child_size,
- child_type, errp, NULL);
+ sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size,
+ child_type);
...
- qdev_set_parent_bus(DEVICE(child_ptr), sysbus_get_default());
|
- object_initialize_child(parent_obj, child_name, child_ptr, child_size,
- child_type, errp, NULL);
+ sysbus_init_child_obj(parent_obj, child_name, child_ptr, child_size,
+ child_type);
- dev = DEVICE(child_ptr);
- qdev_set_parent_bus(dev, sysbus_get_default());
)
While the object_initialize() function doesn't take an
'Error *errp' argument, the object_initialize_child() does.
Since this code is used when a machine is created (and is not
yet running), we deliberately choose to use the &error_abort
argument instead of ignoring errors if an object creation failed.
This choice also matches when using sysbus_init_child_obj(),
since its code is:
void sysbus_init_child_obj(Object *parent,
const char *childname, void *child,
size_t childsize, const char *childtype)
{
object_initialize_child(parent, childname, child, childsize,
childtype, &error_abort, NULL);
qdev_set_parent_bus(DEVICE(child), sysbus_get_default());
}
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-9-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The header file hw/arm/arm.h now includes only declarations
relating to hw/arm/boot.c functionality. Rename it accordingly,
and adjust its header comment.
The bulk of this commit was created via
perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h
In a few cases we can just delete the #include:
hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and
include/hw/arm/bcm2836.h did not require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
The Raspberry Pi boards have a physical memory map which does
not allow for more than 1GB of RAM. Currently if the user tries
to ask for more then we fail in a confusing way:
$ qemu-system-aarch64 --machine raspi3 -m 8G
Unexpected error in visit_type_uintN() at qapi/qapi-visit-core.c:164:
qemu-system-aarch64: Parameter 'vcram-base' expects uint32_t
Aborted (core dumped)
Catch this earlier and diagnose it with a more friendly message:
$ qemu-system-aarch64 --machine raspi3 -m 8G
qemu-system-aarch64: Requested ram size is too large for this machine: maximum is 1GB
Fixes: https://bugs.launchpad.net/qemu/+bug/1794187
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
In commit 210f47840d, we changed the bcm2836 SoC object to
always create a CPU of the correct type for that SoC model. This
makes the default_cpu_type settings in the MachineClass structs
for the raspi2 and raspi3 boards redundant. We didn't change
those at the time because it would have meant a temporary
regression in a corner case of error handling if the user
requested a non-existing CPU type. The -cpu parse handling
changes in 2278b93941 mean that it no longer implicitly
depends on default_cpu_type for this to work, so we can now
delete the redundant default_cpu_type fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180420155547.9497-1-peter.maydell@linaro.org
The raspi3 has AArch64 CPUs, which means that our smpboot
code for keeping the secondary CPUs in a pen needs to have
a version for A64 as well as A32. Without this, the
secondary CPUs go into an infinite loop of taking undefined
instruction exceptions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-10-peter.maydell@linaro.org
Now we have separate types for BCM2386 and BCM2387, we might as well
just hard-code the CPU type they use rather than having it passed
through as an object property. This then lets us put the initialization
of the CPU object in init rather than realize.
Note that this change means that it's no longer possible on
the command line to use -cpu to ask for a different kind of
CPU than the SoC supports. This was never a supported thing to
do anyway; we were just not sanity-checking the command line.
This does require us to only build the bcm2837 object on
TARGET_AARCH64 configs, since otherwise it won't instantiate
due to the missing cortex-a53 device and "make check" will fail.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-9-peter.maydell@linaro.org
The bcm2837 is pretty similar to the bcm2836, but it does have
some differences. Notably, the MPIDR affinity aff1 values it
sets for the CPUs are 0x0, rather than the 0xf that the bcm2836
uses, and if this is wrong Linux will not boot.
Rather than trying to have one device with properties that
configure it differently for the two cases, create two
separate QOM devices for the two SoCs. We use the same approach
as hw/arm/aspeed_soc.c and share code and have a data table
that might differ per-SoC. For the moment the two types don't
actually have different behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-7-peter.maydell@linaro.org
Our BCM2836 type is really a generic one that can be any of
the bcm283x family. Rename it accordingly. We change only
the names which are visible via the header file to the
rest of the QEMU code, leaving private function names
in bcm2836.c as they are.
This is a preliminary to making bcm283x be an abstract
parent class to specific types for the bcm2836 and bcm2837.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-6-peter.maydell@linaro.org
For the rpi1 and 2 we want to boot the Linux kernel via some
custom setup code that makes sure that the SMC instruction
acts as a no-op, because it's used for cache maintenance.
The rpi3 boots AArch64 kernels, which don't need SMC for
cache maintenance and always expect to be booted non-secure.
Don't fill in the aarch32-specific parts of the binfo struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180313153458.26822-2-peter.maydell@linaro.org
This patch adds a "raspi3" machine type, which can now be selected as
the machine to run on by users via the "-M" command line option to QEMU.
The machine type does *not* ignore memory transaction failures so we
likely need to add some dummy devices later when people run something
more complicated than what I'm using for testing.
Signed-off-by: Pekka Enberg <penberg@iki.fi>
[PMM: added #ifdef TARGET_AARCH64 so we don't provide the 64-bit
board in the 32-bit only arm-softmmu build.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds Raspberry Pi 3 support to hw/arm/raspi.c. The
differences to Pi 2 are:
- Firmware address
- Board ID
- Board revision
The CPU is different too, but that's going to be configured as part of
the machine default CPU when we introduce a new machine type.
The patch was written from scratch by me but the logic is similar to
Zoltán Baldaszti's previous work, which I used as a reference (with
permission from the author):
https://github.com/bztsrc/qemu-raspi3
Signed-off-by: Pekka Enberg <penberg@iki.fi>
[PMM: fixed trailing whitespace on one line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>