* qemu-kvm/uq/master:
pc-bios: update kvmvapic.bin
kvmvapic: Use optionrom helpers
optionsrom: Reserve space for checksum
kvmvapic: Simplify mp/up_set_tpr
kvmvapic: Introduce TPR access optimization for Windows guests
kvmvapic: Add option ROM
target-i386: Add infrastructure for reporting TPR MMIO accesses
Allow to use pause_all_vcpus from VCPU context
Process pending work while waiting for initial kick-off in TCG mode
Remove useless casts from cpu iterators
kvm: Set cpu_single_env only once
kvm: Synchronize cpu state in kvm_arch_stop_on_emulation_error()
kvm_set_phys_mem() may be passed sections that are not aligned to a page
boundary. The current code simply brute-forces the alignment which leads
to an inconsistency and an abort().
Fix by aligning the start and the end of the section correctly, discarding
and unaligned head or tail.
This was triggered by a guest sizing a 64-bit BAR that is smaller than a page
with PCI_COMMAND_MEMORY enabled and the upper dword clear.
Signed-off-by: Avi Kivity <avi@redhat.com>
* kwolf/for-anthony: (27 commits)
qemu-img: fix segment fault when the image format is qed
qemu-io: fix segment fault when the image format is qed
qemu-tool: revert cpu_get_clock() abort(3)
qemu-iotests: Test rebase with short backing file
qemu-iotests: 026: Reduce output changes for cache=none qcow2
qemu-iotests: Filter out DOS line endings
test: add image streaming tests
qemu-iotests: add iotests Python module
qemu-iotests: export TEST_DIR for non-bash tests
QMP: Add qmp command for blockdev-group-snapshot-sync
qapi: Introduce blockdev-group-snapshot-sync command
qcow2: Reject too large header extensions
qcow2: Fix offset in qcow2_read_extensions
block: drop aio_multiwrite in BlockDriver
block: remove unused fields in BlockDriverState
qcow2: Fix build with DEBUG_EXT enabled
ide: fail I/O to empty disk
fdc: DIR (Digital Input Register) should return status of current drive...
fdc: fix seek command, which shouldn't check tracks
fdc: check if media rate is correct before doing any transfer
...
* kraxel/usb.39: (21 commits)
usb: Resolve warnings about unassigned bus on usb device creation
usb-redir: Return USB_RET_NAK when we've no data for an interrupt endpoint
usb-redir: Limit return values returned by iso packets
usb-redir: Let the usb-host know about our device filtering
usb-redir: Always clear device state on filter reject
usb-redir: Fix printing of device version
ehci: drop old stuff
usb-ehci: Handle ISO packets failing with an error other then NAK
libcacard: fix reported ATR length
usb-ccid: advertise SELF_POWERED
libcacard: link with glib for g_strndup
usb-desc: fix user trigerrable segfaults (!config)
usb-ehci: sanity-check iso xfers
usb: add tracepoint for usb packet state changes.
usb-xhci: enable packet queuing
usb-uhci: implement packet queuing
usb-uhci: process uhci_handle_td return code via switch.
usb-uhci: add UHCIQueue
usb-uhci: cleanup UHCIAsync allocation & initialization.
usb-ehci: fix reset
...
[root@f15 qemu]# qemu-img info /home/zwu/work/misc/rh6.img
image: /home/zwu/work/misc/rh6.img
file format: qed
virtual size: 4.0G (4294967296 bytes)
disk size: 1.2G
cluster_size: 65536
Segmentation fault (core dumped)
Today when i were fixing another issue, i found this issue; After simple
investigation, i found that the required clock vm_clock is not created
for qemu tool.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
[root@f15 qemu]# qemu-io -c info /home/zwu/work/misc/rh6.img
format name: qed
cluster size: 64 KiB
vm state offset: 0.000000 bytes
Segmentation fault (core dumped)
This reason is same as the former patch
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Despite the fact that the qemu-tool environment has no guest running and
vm_clock therefore does not make sense, there is code that gets the
vm_clock time even in qemu-tool. Therefore, revert the abort(3) call
and just return 0 like we used to. This unbreaks qemu-img/qemu-io with
QED and Kevin has also expressed interest in this for qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-iotests supports the -nocache option which makes the tests run with
cache=none. For blkdebug tests with qcow2 this means that we may see
test results that differ from cache=writethrough. This patch makes the
diff a bit smaller and therefore easier to review.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This one makes it possible to run qemu-iotests on a Windows build using Wine
and get somewhat meaningful results.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a test suite for the image streaming feature. It
exercises the 'block_stream', 'block_job_cancel', 'block_job_set_speed',
and 'query-block-jobs' QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block layer tests that involve QMP commands rather than qemu-img or
qemu-io are not well-suited for shell scripting. This patch adds a
Python module which allows tests to be written in Python instead.
The basic API is:
VM - class for launching and interacting with a VM
QMPTestCase - abstract base class for tests that use QMP
qemu_img() - wrapper function for invoking qemu-img
qemu_io() - wrapper function for invoking qemu-io
imgfmt - the image format under test (e.g. qcow2, qed)
test_dir - scratch directory path for temporary files
main() - entry point for running tests
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-iotests may need to create large image files it is possible
to specify the test directory. The TEST_DIR variable needs to be
exported so non-bash tests can make use of it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the QMP command for blockdev-group-snapshot-sync. It
takes an array in as the input, for the argument devlist. The
array consists of the following elements:
+ device: device to snapshot. e.g. "ide-hd0", "virtio0"
+ snapshot-file: path & file for the snapshot image. e.g. "/tmp/file.img"
+ format: snapshot format. e.g., "qcow2". Optional
There is no HMP equivalent for the command.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image files that make qemu-img info read several gigabytes into the
unknown header extensions list are bad. Just fail opening the image
if an extension claims to be larger than the header extension area.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The spec says that the length of extensions is padded to 8 bytes, not
the offset. Currently this is the same because the header size is a
multiple of 8, so this is only about compatibility with future changes
to the header size.
While touching it, move the calculation to a common place instead of
duplicating it for each header extension type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sync_aiocb is unused since commit ce1a14d (Dynamically allocate AIO
Completion Blocks., 2006-08-07).
private is unused since commit 56a1493 (drive cleanup fixes., 2009-09-25).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requesting a read or a write operation on an empty disk can lead
to QEMU dumping core.
Also fix a few braces here and there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The seek command just sends step pulses to the drive and doesn't care if
there is a medium inserted of if it is banging the head against the drive.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The programmed rate has to be the same as the required rate for the
floppy format ; if that's not the case, the transfer should abort.
This check can be disabled by using the 'check_media_rate' property.
Save media rate value only if media rate check is enabled.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set it to true for current Qemu versions, and false for previous ones
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies must be read at a specific transfer rate, depending of its own format.
Update floppy description table to include required transfer rate.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DIR and CCR registers share the same address ; DIR is read-only
while CCR is write-only
CCR register is used to change media transfer rate, which will be
checked in following changes.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A real floppy doesn't attempt to write to read-only media either.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In fact, only three control commands generate an interrupt:
read_id, recalibrate and seek
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bit must be active while a command is currently executed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Floppies can be simple or double-sided. However, current code
was only taking the common case into account (ie 2 sides).
This repairs single-sided floppies, which where totally broken
before this patch : for track > 0, wrong sector number was
calculated, and data was read/written at wrong place on
underlying device.
Fortunately, only some 360 kB floppies are single-sided, so
this bug was probably not seen much.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When storing large contiguous ranges in phys_map, all values tend to
be the same pointers to a single MemoryRegionSection. Collapse them
by marking nodes with level > 0 as leaves. This reduces tree memory
usage dramatically.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of considering subpage on a per-page basis, split each section
into a subpage head, multipage body, and subpage tail, and register
each separately. This simplifies the registration functions.
Signed-off-by: Avi Kivity <avi@redhat.com>
We no longer describe memory in terms of individual pages; use sections
throughout instead.
PhysPageDesc no longer used - remove.
Signed-off-by: Avi Kivity <avi@redhat.com>
If the first subpage installed in a page is RAM, then we install it as
a full page, instead of a subpage. Fix by not special casing RAM.
The issue dates to commit db7b5426a4, which introduced subpages.
Signed-off-by: Avi Kivity <avi@redhat.com>
Use an expanding vector to store nodes. Allocation is baroque to g_renew()
potentially invalidating pointers; this will be addressed later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of storing PhysPageDesc, store pointers to MemoryRegionSections.
The various offsets (phys_offset & ~TARGET_PAGE_MASK,
PHYS_OFFSET & TARGET_PAGE_MASK, region_offset) can all be synthesized
from the information in a MemoryRegionSection. Adjust phys_page_find()
to synthesize a PhysPageDesc.
The upshot is that phys_map now contains uniform values, so it's easier
to generate and compress.
The end result is somewhat clumsy but this will be improved as we we
propagate MemoryRegionSections throughout the code instead of transforming
them to PhysPageDesc.
The MemoryRegionSection pointers are stored as uint16_t offsets in an
array. This saves space (when we also compress node pointers) and is
more cache friendly.
Signed-off-by: Avi Kivity <avi@redhat.com>
L1 and the lower levels in l1_phys_map are equivalent, except that L1 has
a different size, and is always allocated. Simplify the code by removing
L1. This leaves us with a tree composed solely of L2 tables, but that
problem can be renamed away later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of incrementally building the memory map, rebuild it every time.
This allows later simplification, since the code need not consider overlaying
a previous mapping. It is also RCU friendly.
With large memory guests this can get expensive, since the operation is
O(mem size), but this will be optimized later.
As a side effect subpage and L2 leaks are fixed here.
Signed-off-by: Avi Kivity <avi@redhat.com>
Current memory listeners are incremental; that is, they are expected to
maintain their own state, and receive callbacks for changes to that state.
This patch adds support for stateless listeners; these work by receiving
a ->begin() callback (which tells them that new state is coming), a
sequence of ->region_add() and ->region_nop() callbacks, and then a
->commit() callback which signifies the end of the new state. They should
ignore ->region_del() callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>