The l_start and l_len fields in the various target_flock structures are
supposed to be '__kernel_off_t' or '__kernel_loff_t', which means they
should be signed, not unsigned. Correcting the structure definitions means
that __get_user() and __put_user() will correctly sign extend them if
the guest is using 32 bit offsets and the host is using 64 bit offsets.
This fixes failures in the LTP 'fcntl14' tests where it checks that
negative seek offsets work correctly.
We reindent the structures to drop hard tabs since we're touching 40%
of the fields anyway.
RV: long long -> abi_llong as suggested by Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The siginfo_t struct includes a union. The correct way to identify
which fields of the union are relevant is complicated, because we
have to use a combination of the si_code and si_signo to figure out
which of the union's members are valid. (Within the host kernel it
is always possible to tell, but the kernel carefully avoids giving
userspace the high 16 bits of si_code, so we don't have the
information to do this the easy way...) We therefore make our best
guess, bearing in mind that a guest can spoof most of the si_codes
via rt_sigqueueinfo() if it likes. Once we have made our guess, we
record it in the top 16 bits of the si_code, so that tswap_siginfo()
later can use it. tswap_siginfo() then strips these top bits out
before writing si_code to the guest (sign-extending the lower bits).
This fixes a bug where fields were sometimes wrong; in particular
the LTP kill10 test went into an infinite loop because its signal
handler got a si_pid value of 0 rather than the pid of the sending
process.
As part of this change, we switch to using __put_user() in the
tswap_siginfo code which writes out the byteswapped values to
the target memory, in case the target memory pointer is not
sufficiently aligned for the host CPU's requirements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64-bit x86 syscall ABI uses 32-bit UIDs; only define
USE_UID16 for 32-bit x86.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.
And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.
Moreover, fd type is wrong: fd is int, not ulong.
This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).
CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
They content several new macro members, also contents TARGET_N*.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443240605-2924-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction). This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same. This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.
I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
target_cmsghdr)" twice anymore.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.
[rth: Moved all of the implementation of atomic instructions to a later patch.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Simple "hello world" MIPS N32 userland program crashes with segfault due to
incorrectly defined stat structure in QEMU.
Correct "target_stat" definition to match kernel's "stat64" as in MIPS N32
there are only plain "stat" syscalls using 64-bit structure.
Reported-by: Daniel Sanders <daniel.sanders@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Daniel Sanders <daniel.sanders@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Fix TARGET_SI_PAD_SIZE calculation to match the way the kernel does it.
Use different TARGET_SI_PREAMBLE_SIZE for 32-bit and 64-bit targets.
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When creating a timer handle, we give the timer id a special magic offset
of 0xcafe0000. However, we never mask that offset out of the timer id before
we start using it to dereference our timer array. So we always end up aborting
timer operations because the timer id is out of bounds.
This was not an issue before my patch e52a99f756 ("linux-user: Simplify
timerid checks on g_posix_timers range") because before we would blindly mask
anything above the first 16 bits.
This patch simplifies the code around timer id creation by introducing a proper
target_timer_id typedef that is s32, just like Linux has it. It also changes the
magic offset to a value that makes all timer ids be positive.
Reported-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.
Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
MIPS requires the pad field to 64b-align the data field just as ARM
does.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.
Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.
This is needed for building with musl libc.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Glibc when built for newer kernels assumes that the sendmmsg syscall is
available. Without it, dns resolution simply fails to work.
Wrap the syscall with existing infrastructure so that we don't have a host
dependency on sendmmsg.
To avoid locking the same area of guest memory twice (which will break if
DEBUG_REMAP is defined) we pull the lock/unlock part of do_sendrecvmsg()
out into its own function so the actual implementation can be shared.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: add recvmmsg support;
handle errors (which also implies support for non-blocking operations);
cap the vector length as the kernel implementation does;
don't lock guest memory twice;
support MSG_WAITFORONE flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 kernel defines its __kernel_uid_t type as 32 bits, unlike
32 bit ARM, so don't enable our 16-bit UID wrapper handling.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some targets use a stat64 structure for the stat64 syscall while others
use a stat structure. SPARC64 used the wrong kind.
Instead of extending the conditional compilation in syscall.c, now a
macro TARGET_HAS_STRUCT_STAT64 is defined whenever a target has a
target_stat64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
This is needed to be able to run dhclient.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some syscall handlers have special code for ARM enabled that we don't
need on AArch64. Exclude AArch64 in those cases. In other places we
can share struct definitions with other targets or have to provide our
own.
With this patch applied, most syscall definitions in linux-user should
be sound for AArch64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The epoll emulation uses data structures without packing them, so the
compiler might choose to add padding inside.
This patch makes the most offending one (target_epoll_event) a packed
structure to make sure we don't pad it by accident. ARM would pad it,
so declare the padding mandatory for ARM targets.
This fixes i386-on-ARM epoll emulation for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
OpenRISC uses the asm-generic versions of target_stat and
target_stat64, but it was incorrectly using the x86/ARM/etc version
due to a misplaced defined(TARGET_OPENRISC). The previously unused
OpenRISC section of the ifdef ladder also defined an incorrect
target_stat and omitted the target_stat64 definition. Fix
target_stat, provide target_stat64, and add a comment noting that
these are the asm-generic versions for the benefit of future ports.
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The values of F_RDLCK, F_WRLCK, F_UNLCK, F_EXLCK, F_SHLCK
differ between alpha and other linux architectures.
This patch allows to run "dpkg" (database lock).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unconditional bswap replaced by __get_user/__put_user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In case when TARGET_ABI_BITS == 32 && HOST_LONG_BITS == 64, the last
byte of the target dirent structure (aka d_type byte) was never copied
from the host dirent structure, thus breaking everything that relies
on valid d_type value, e.g. glob(3).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fix the SNDCTL_DSP_MAP{IN,OUT}BUF ioctl definitions so that they
refer to a suitably defined target struct layout rather than hardcoding
the ioctl number. This fixes complaints from the syscall_init()
consistency check when running an x86_64-to-x86_64 linux-user qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definitions for the ioctl numbers TARGET_BLKBSZGET and
TARGET_BLKBSZSET had the wrong size parameters (they are defined
with size_t, not int, even though the ioctl implementations themselves
read and write integers). Since commit 354a0008 we now have an
ioctl wrapper definition for BLKBSZGET and so on an x86-64-to-x86-64
linux-user binary we were triggering the mismatch warning in
syscall_init().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Some BLK ioctls passed sizeof(x) into a macro that already did sizeof() on
the passed in argument, rendering the size information inside the ioctl be
the size of the host default integer type.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements all ioctls currently implemented by device mapper,
enabling us to run dmsetup and kpartx inside of linux-user.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
abi_(u)long might be different from target_ulong, so don't use tswapl
but introduce a new tswapal
Signed-off-by: Matthias Braun <matze@braunis.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The codes for get/setrlimit differ between linux target platforms.
This patch adds conversion.
This is important else programs (rsyslog, python, ...) can go into a
near infinite loop trying to close all the file descriptors from 0 to
-1.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch was validated with programs from DirectFB-1.0 and
WebKit/DirectFB.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
DirectFB-1.0 uses at least two of the four added ioctls, and the two
others were added for completeness. This patch was validated with the
program "vlock -all/-new".
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Quite a number of uid/gid related syscalls are only defined on systems
with USE_UID16 defined. This is apperently based on the idea that these
system calls would never be called on non-UID16 systems. Make these
syscalls available for all architectures that define them.
drop alpha hack to support selected UID16 syscalls. MIPS and PowerPC
were also defined as UID16, to get uid/gid syscalls available, drop
this error as well.
Change QEMU to reflect this.
Cc: Ulrich Hecht <uli@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Support the epoll family of syscalls: epoll_create(), epoll_create1(),
epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1()
and epoll_pwait() are later additions, so we have to test separately
in configure for their presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Implement the FS_IOC_FIEMAP ioctl using the new support for
custom handling of ioctls; this is needed because the struct
that is passed includes a variable-length array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
rlim_t conversion between host and target added.
Otherwise there are some incorrect case like
- RLIM_INFINITY on 32bit target -> 64bit host.
- RLIM_INFINITY on 64bit host -> mips and sparc target ?
- Big value(for 32bit target) on 64bit host -> 32bit target.
One is added into getrlimit, setrlimit, and ugetrlimit. It converts both
RLIM_INFINITY and value bigger than target can hold(>31bit) to RLIM_INFINITY.
Another one is added to guest_stack_size calculation introduced by
703e0e89. The rule is mostly same except the result on the case is keeping
the value of guest_stack_size.
Slightly tested for SH4, and x86_64 -linux-user on x86_64-pc-linux host.
Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move userland PALcode handling into linux-user main loop so that
we can send signals from there. This also makes alpha_palcode.c
system-level only, so don't build it for userland. Add defines
for GENTRAP PALcall mapping to signals.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
everything needed to run SDL on a framebuffer device in the userspace emulator
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Swap __pad1 and st_blocks fields location to maintain proper alignment.
This fixes incorrect 'du' and 'stat' report on ppc guest.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes swaps on l_pid which were pretty much of random size. Implements
F_SETLEASE, F_GETLEASE. Now passes all LTP fcntl tests.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Microblaze recently changed their ABI. The new is not backwards compatible
and there doesn't seem to be a way to distinguish old/new binaries.
Let's support the latest ABI for now and hope someone figures out a way to
hande both ABI's later.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
On Tue, Jun 16, 2009 at 08:19:23PM -0500, Anthony Liguori wrote:
> malc wrote:
>>
>> On my system the above line causes gcc to emit:
>>
>> In file included from /home/malc/x/rcs/git/qemu/linux-user/strace.c:12:
>> /usr/include/linux/futex.h:48: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:48: error: syntax error before '*' token
>> /usr/include/linux/futex.h:63: error: field `list' has incomplete type
>> /usr/include/linux/futex.h:83: error: field `__user' has incomplete type
>> /usr/include/linux/futex.h:83: error: syntax error before '*' token
>> make[1]: *** [strace.o] Error 1
> We had the same problem with usb-linux.c. It's broken system headers,
> the __user stuff is supposed to get removed as part of the headers
> installation.
> It builds fine on my system (Fedora 10).
Howabout something like this:
commit eb8387cb0eda32a18880664eb5f0ca5c8bf05b45
Author: Riku Voipio <riku.voipio@iki.fi>
Date: Thu Jun 18 22:44:31 2009 +0300
Subject: linux-user: include futex defines directly
Since some common distributions have broken linux/futex.h, stop
including it. Instead add the defines directly.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Hi,
This is a new try to fix the fcntl support in linux-user. I tried to
adress all comments but as the previous version is several weeks old,
it's possible that I've missed some.
This patch doesn't handle linux specific fcntl flags. My plan is to get
this version of the patch reviewed/fixed and then, add them if wanted.
Thanks,
Arnaud
Signed-off-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
- to not to break strace with GUEST_BASE is set:
- Strace now can load and print guest strings correctly.
- Added printing support for commonly used flags in some syscalls
(e.g open, creat, mmap etc.)
v2:
- fix strace.c build on etch
- add futex print to strace
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch fixes the two following problems for Alpha linux-user:
- termbits.h is incorrectly using host IOC macros and structures
- IOC bitfields sizes are incorrectly set
This patch corrects the ioctl TCGETS done by isatty function call
on Alpha (when running SPEC crafty for instance).
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5704 c046a42c-6fe2-441c-8c8c-71466251a162
On Alpha the target to native fcntl definitions were missing. Because of
this, programs trying to open files with the O_CREAT option were getting
O_APPEND instead, etc.
This was keeping gcc from the spec benchmarks from running, among other
things.
(Vince Weaver)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5672 c046a42c-6fe2-441c-8c8c-71466251a162
glibc's structs dirent and dirent64 is different from in-kernel dirent
and dirent64. Kernel headers doesn't provide structs dirent(64) any
more. So we should add it to qemu headers.
To avoid conflict with glibc it called struct linux_dirent(64).
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5480 c046a42c-6fe2-441c-8c8c-71466251a162
- Clean TARGET_MAP_xx macros to avoid nested #if #endif
- Add alpha specific values
Based on a patch by Tristan Gingold
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5356 c046a42c-6fe2-441c-8c8c-71466251a162
Testing qemu-x86_64, I happen to run df and came across these mistakes
in the target_statfs/target_statfs64 structure definitions (reference:
linux/include/asm-x86/statfs.h).
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4895 c046a42c-6fe2-441c-8c8c-71466251a162
which included commits to RCS files with non-trunk default branches.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3 c046a42c-6fe2-441c-8c8c-71466251a162