This is not really i386 only, we can have the same test for all
architectures supporting system tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We can certainly support some common tests for system emulation that
make use of our minimal defined boot.S support. It will still be up to
individual architectures to ensure they build so we provide a
MULTIARCH_TESTS variable that they can tack onto TESTS themselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Install optional dependencies of QEMU to get better coverage.
The following components are now enabled:
$ ./configure
...
Multipath support yes
VNC SASL support yes
RDMA support yes
PVRDMA support yes
libiscsi support yes
seccomp support yes
libpmem support yes
libudev yes
Note: The udev-devel package is provided by systemd-devel.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190504055440.20406-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com>
Based on the ubuntu.docker file.
Used to reproduce the build failure Peter was seeing.
Others might find this useful too ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190503070241.24786-1-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This tests boot a full VM and check the serial console until
the SSH daemon is running, then start a SSH session and run
some commands.
This test can be run using:
$ avocado --show=ssh run -t arch:mips tests/acceptance/linux_ssh_mips_malta.py
ssh: Entering interactive session.
ssh: # uname -a
ssh: Linux debian-mips 3.2.0-4-4kc-malta #1 Debian 3.2.51-1 mips GNU/Linux
ssh: # lspci -d 11ab:4620
ssh: 00:00.0 Host bridge: Marvell Technology Group Ltd. GT-64120/64120A/64121A System Controller (rev 10)
ssh: # cat /sys/bus/i2c/devices/i2c-0/name
ssh: SMBus PIIX4 adapter at 1100
ssh: # cat /proc/mtd
ssh: dev: size erasesize name
ssh: mtd0: 00100000 00010000 "YAMON"
ssh: mtd1: 002e0000 00010000 "User FS"
ssh: mtd2: 00020000 00010000 "Board Config"
ssh: # md5sum /dev/mtd2ro
ssh: 0dfbe8aa4c20b52e1b8bf3cb6cbdf193 /dev/mtd2ro
ssh: # poweroff
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190523161832.22490-5-f4bug@amsat.org>
Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-6-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-5-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is useful to write qtest about fw_cfg file entry.
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-3-liq3ea@163.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, fw_cfg_test uses one QTestState for every test case.
This will add all command lines for every test case and
this is unnecessary. This patch split the test cases and for
every test case it uses his own QTestState. This patch does following
things:
1. Get rid of the global 'fw_cfg', this need add a uninit function
2. Convert every test case in a separate QTestState
After this patch, we can add fw_cfg test case freely and will not
have effect on other test cases.
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
[PMD: Removed 'ret' local variable in main()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We allocate the QFWCFG object previous to run the qtests,
free it once we are finished.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Split patch, fill commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The pc_fw_cfg_init() function allocates an IO QFWCFG object.
Add the pc_fw_cfg_uninit() function to deallocate it (and use it).
Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Split patch, fill commit description, call uninit in malloc-pc.c]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The mm_fw_cfg_init() allocates a QFWCFG object,
add mm_fw_cfg_uninit() to deallocate it.
Similarly with io_fw_cfg_init(), add io_fw_cfg_uninit().
Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-2-liq3ea@163.com>
[PMD: Split patch, filled commit description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
vubr_set_host() passes char values to isdigit(). Undefined behavior
when the value is negative.
Fix by using qemu_isdigit() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190514180311.16028-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[Missing #include "qemu-common.h" fixed]
reconnect for vhost blk
tests for UEFI
misc other stuff
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc5AAMAAoJECgfDbjSjVRp57wIAKUAF8mvTaFfl/ge9IKJ0ZSO
+dZS+2Zdc52n3Qk2K511hMvMmWD6xO98+VSXzwax2KgfIVCcQyYSCSbkyqZ4XiFg
JUobhLHs6W24zn+2T8vZoqe4XWU6Pm1Y6NM72EFuhag8mhFlwWyMjpTwsISbjhGM
/FpHsPpB2/c7Uofe8CVmPl55PDqOoIm35YlbH5v6zUtBiPNRgZTDOMtYjl/tyuZC
VExs41/G15psNDIFd4dL1Zq6UjQBdu3ALIjIXTmPfg0nFXZn7FrOBRHbXWyzR9Tb
rqEDauxb3iGHphgNqeumfrSPXNrfB91Z8AD2aerTcvgUEdbc9QykxS/YM3erkGo=
=kkcS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: features, fixes
reconnect for vhost blk
tests for UEFI
misc other stuff
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 21 May 2019 14:41:32 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (34 commits)
tests: acpi: print error unable to dump ACPI table during rebuild
tests: acpi: refactor rebuild-expected-aml.sh to dump ACPI tables for a specified list of targets
tests: acpi: allow to override default accelerator
tests: acpi: ignore SMBIOS tests when UEFI firmware is used
tests: acpi: add a way to start tests with UEFI firmware
tests: acpi: add acpi_find_rsdp_address_uefi() helper
tests: acpi: move boot_sector_init() into x86 tests branch
tests: acpi: skip FACS table if board uses hw reduced ACPI profile
tests: acpi: fetch X_DSDT if pointer to DSDT is 0
tests: acpi: make pointer to RSDP 64bit
tests: acpi: make RSDT test routine handle XSDT
tests: acpi: make acpi_fetch_table() take size of fetched table pointer
tests: acpi: rename acpi_parse_rsdp_table() into acpi_fetch_rsdp_table()
pci: Simplify pci_bus_is_root()
pcie: Remove redundant test in pcie_mmcfg_data_{read,write}()
libvhost-user: fix bad vu_log_write
hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()
i386, acpi: remove mcfg_ prefix in AcpiMcfgInfo members
hw/arm/virt-acpi-build: remove unnecessary variable mcfg_start
do not call vhost_net_cleanup() on running net from char user event
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of just asserting print the error that lead to assert first.
While at it move assert into rebuild branch, which removes redundant
check done in case of !rebuild branch is taken (the later is taken
care of by g_assert_no_error).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556808723-226478-16-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make initial list contain x86_64.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556808723-226478-15-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- some iotests patches that have multiple reviews and thus are ready to go
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=P3eP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-05-21' into staging
- qtest patches to get rid of the global_qtest variable in more tests
- some iotests patches that have multiple reviews and thus are ready to go
# gpg: Signature made Tue 21 May 2019 11:40:31 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-05-21:
tests/qemu-iotests: Remove the "_supported_os Linux" line from many tests
cirrus / travis: Add gnu-sed and bash for macOS and FreeBSD
tests/qemu-iotests: Do not hard-code the path to bash
tests/qemu-iotests/check: Pick a default machine if necessary
tests/qemu-iotests/005: Add a sanity check for large sparse file support
tests/hd-geo-test: Use qtest_init() instead of qtest_start()
tests/device-introspect: Use qtest_init() instead of qtest_start()
tests/qom-test: Use qtest_init() instead of qtest_start()
tests/numa-test: Use qtest_init() instead of qtest_start()
tests/q35-test: Make test independent of global_qtest
tests/libqos: Get rid of global_qtest dependency in qvring_init()
tests/libqtest: Fix description of qtest_vinitf() and qtest_initf()
tests/libqtest: Remove unused global_qtest-related wrapper functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of tests run fine on FreeBSD and macOS, too - the limitation
to Linux here was likely just copied-and-pasted from other tests.
Thus remove the "_supported_os Linux" line from tests that run
successful in our CI pipelines on FreeBSD and macOS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
bash is installed in a different directory on non-Linux systems like
FreeBSD. Do not hard-code /bin/bash here so that the tests can run
there, too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-system-arm, qemu-system-aarch64 and qemu-system-tricore do not have
a default machine, so when running the qemu-iotests with such a binary,
lots of tests are failing. Fix it by picking a default machine in the
"check" script instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"check -raw 005" fails when running on certain filesystems - these do not
support such large sparse files. Use the same check as in test 220 to
skip the test in this case.
Suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190502084506.8009-2-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Message-Id: <20190515174328.16361-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a local QTestState variable, so that we can finally get rid
of the undesired global_qtest variable in this file, too.
Message-Id: <20190515174328.16361-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Library functions should not depend on global_qtest functions like
writew() and writeq(), so that they can also be used in tests that
deal with multiple QTestStates at the same time (like migration tests).
Message-Id: <20190515174328.16361-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These functions are convenience wrappers of qtest_init() and not of
qtest_start().
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190513154759.24973-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A bunch of the wrapper functions that use global_qtest are not used
anymore. Remove them to avoid that they are used in new code again.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190510052239.21947-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By default test cases were run with 'kvm:tcg' accelerators to speed up
tests execution. While it works for x86, were change of accelerator
doesn't affect ACPI tables, the approach doesn't works for ARM usecase
though.
In arm/virt case, KVM mode requires using 'host' cpu model, which
isn't available in TCG mode. That could be worked around with 'max'
cpu model, which works both for KVM and TCG. However in KVM mode it
is necessary to specify matching GIC version, which also could use
'max' value to automatically pick GIC version suitable for host's CPU.
Depending on host cpu type, different GIC versions would be used,
which in turn leads to different ACPI tables (APIC) generated.
As result while comparing with reference blobs, test would fail if
host's GIC version won't match the version on the host where
reference blobs where generated.
Let's keep testing simple for now and allow ARM tests run in TCG only
mode. To do so introduce 'accel' parameter in test configuration, so
test case could override default "kvm:tcg" with accelerator of choice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-12-git-send-email-imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
once FW provides a pointer to SMBIOS entry point like it does for
RSDP it should be possible to enable this one the same way.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1556808723-226478-11-git-send-email-imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For testcase to use UEFI firmware, one needs to provide and specify
firmware and varstore blob names in test_data { uefi_fl1, uefi_fl2 }
fields respectively and RAM start address plus size where to look for
test structure signature. Additionally testcase should specify
bootable cdrom image from uefi-boot-images with EFI test utility.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <1556808723-226478-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
introduce UEFI specific counterpart to acpi_find_rsdp_address()
that will help to find RSDP address when [OA]VMF is used as
firmware. It requires guest firmware or other guest app to place
1Mb aligned UefiTestSupport structure (defined in this patch)
in RAM with UefiTestSupport::signature_guid set to
AB87A6B1-2034-BDA0-71BD-375007757785
For test app details see commit
(09a274d82f tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1556808723-226478-9-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
boot_sector_init() won't be used by arm/virt board, so move it from
global scope to x86 branch that uses it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556808723-226478-8-git-send-email-imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If FADT has HW_REDUCED_ACPI flag set, do not attempt to fetch
FACS as it's not provided by the board.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1556808723-226478-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
that way it would be possible to test a DSDT pointed by
64bit X_DSDT field in FADT.
PS:
it will allow to enable testing arm/virt board, which sets
only newer X_DSDT field.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-6-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case of UEFI, RSDP doesn't have to be located in lowmem,
it could be placed at any address. Make sure that test won't
break if it is placed above the first 4Gb of address space.
PS:
While at it cleanup some local variables as we don't really
need them.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556808723-226478-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If RSDP revision is more than 0 fetch table pointed by XSDT
and fallback to legacy RSDT table otherwise.
While at it drop unused acpi_get_xsdt_address().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently acpi_fetch_table() assumes 32 bit size of table pointer
in ACPI tables. However X_foo variants are 64 bit, prepare
acpi_fetch_table() to handle both by adding an argument
for addr_ptr pointed entry size. Follow up commits will use that
to read XSDT and X_foo entries in ACPI tables.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1556808723-226478-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
so name would reflect what the function does
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1556808723-226478-2-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, 245 fails for me because some stream job has already finished
while the test expects it to still be active. (With -c none, it fails
basically every time.) The most reliable way to fix this is to simply
set auto_finalize=false so the job will remain in the block graph as
long as we need it. This allows us to drop the rate limiting, too,
which makes the test faster.
The only problem with this is that there is a single place that yields a
different error message depending on whether the stream job is still
copying data (so COR is enabled) or not (COR has been disabled, but the
job still has the WRITE_UNCHANGED permission on the target node). We
can easily address that by expecting either error message.
Note that we do not need auto_finalize=false (or rate limiting) for the
active commit job, because It never completes without an explicit
block-job-complete anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
log() is in the current module, there is no need to prefix it. In fact,
doing so may make VM.run_job() unusable in tests that never use
iotests.log() themselves.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sometimes we cannot tell which error message qemu will emit, and we do
not care. With this change, we can then just pass an array of all
possible messages to assert_qmp() and it will choose the right one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We already have 221 for accesses through the page cache, but it is
better to create a new file for O_DIRECT instead of integrating those
test cases into 221. This way, we can make use of
_supported_cache_modes (and _default_cache_mode) so the test is
automatically skipped on filesystems that do not support O_DIRECT.
As part of the split, add _supported_cache_modes to 221. With that, it
no longer fails when run with -c none or -c directsync.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qmp_cont fails if vm in RUN_STATE_FINISH_MIGRATE, so let's wait for
final RUN_STATE_POSTMIGRATE. Also, while being here, check qmp_cont
result.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cleaned up with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
slirp/src/*
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
We're in the process of spinning out slirp/. tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't. tests/uefi-test-tools/ is guest
software. The remaining reverts are the same as in commit
b7d89466dd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
This patch adds a test for rebasing an image that currently does not
have a backing file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that a job coroutine always runs in the right iothread after
the AioContext of its main node has changed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test case 192 calls _launch_qemu, so it also needs to _cleanup_qemu when
it's done, otherwise the QMP FIFOs stay around in scratch/. It also
creates a temporary NBD socket that needs to be removed as well at the
end of the test case.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
- Get rid of some more dependencies on the global_qtest variable in the qtests
- Some other small test clean-ups
- Some copyright statement clarifications
- Mark TARGET_FMT_lu as poisoned
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJc09qrAAoJEC7Z13T+cC21VmcP/jeQLEJUcAgTPGIkhsNrl6g+
mXqnHd2QEJE+hzcbdgHs/d7XU3+BcPZVG22uoeWNK2S45JMk3gFrltZkx4HcOgW0
UIjtiOu1bcTkSlU82/SaDFSvdvmP+CHcJrOMdwjZhK3UjjmMsR2VkKYd0ESnm7yP
RFP7cSgEoMJyUPjieF0D8dg7XmSWdbhTI1XYyBOP2zPRoduFYT0eb+bE052SD7ve
DussTGT6Ub0TpbGyKBtqtD9Ej0hkFAdSjNHeDr8Dzb7wHMTZD4J9m/8T04oOgtN0
pUla6Ufx5aqr4H27DOF8XIrOz9945kisYJrJJFa9AOL5CM379upxnGdycVHN6MCE
fuMXmtZ1mxuOJ9hutEk81whsDsXDuQwKA4YazJiSHhzJDzpztjn+Ng0fW5UGY2Wo
dX8uaX04rTvmUWHuaZqPCwVjgVgzlTMYfVvh0+2NYDGsMQFQvMtlJW/RNLpT4dX1
e5E5sKvQ3a8hrK6SiPZDftpnMEd+v/4BDSSQeVHbl03rFVsJH5CSoH/0f7lTDzOi
LF53h8fiNt7u2/nIl7fVjn2haf9+JuWAdF1yyg4WFuvPncGcRNGVWJL+qj/dXxWJ
kgQMDTGm00VYp00Pq+J5xTxVmOoZzEdO/hXKpwOHXOViw0M2CO871mRc57/CvHCY
+0xtPH9bZdPj79GrigSA
=LGlY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-05-09' into staging
- Fix "make check" problem that occurred with LANG=C and Python 3.5 / 3.6
- Get rid of some more dependencies on the global_qtest variable in the qtests
- Some other small test clean-ups
- Some copyright statement clarifications
- Mark TARGET_FMT_lu as poisoned
# gpg: Signature made Thu 09 May 2019 08:45:47 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-05-09:
include/exec/poison: Mark TARGET_FMT_lu as poisoned, too
target/sh4: Fix LGPL information in the file headers
target/openrisc: Fix LGPL information in the file headers
hw/i2c/smbus_ich9: Fix the confusing contributions-after-2012 statement
tests: qpci_unplug_acpi_device_test() should not rely on global_qtest
tests/drive_del-test: Use qtest_init() instead of qtest_start()
tests/Makefile: Remove unused test-obj-y variable
tests/tpm-tests: Use g_test_skip() to mark skipped tests
tests/ide-test: Make test independent of global_qtest
tests/test-hmp: Use qtest_init() instead of qtest_start()
tests/qmp-cmd-test: Use qtest_init() instead of qtest_start()
tests/megasas: Make test independent of global_qtest
tests/tco: Make test independent of global_qtest
tests: Force Python I/O encoding for check-qapi-schema
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libqos functions should not use functions that require global_qtest to
be set, since such library functions could also be used by tests that
deal with multiple test states. Add a parameter to this function to
explicitly specify the test state.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508143209.24350-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run
Use qtest_init() and qtest_quit() instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508142153.21555-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I recently noticed that test-obj-y contains a file called
tests/check-block-qtest.o which simply does not belong to any .c
file and thus wondered why this is not causing any trouble. It is
only used to add -Itests to the command line (which refers to the
build directory). However, it is not needed because "-iquote $(@D)"
already sets this up in rules.mak. Thus we can simply remove this
variable.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190508075527.32164-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we do not use gtester anymore (which had a bug here),
we can now use g_test_skip() to mark skipped tests.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20190424094557.28404-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState, so we do not need the problematic global_qtest
variable (which causes trouble for tests that have multiple test states)
here anymore.
Message-Id: <20190409085245.31548-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run
Use qtest_init() and qtest_quit() instead.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190409085245.31548-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run
(since global_qtest can not be used in tests that have to track
multiple QEMU states, like migration tests). Use qtest_init() and
qtest_quit() instead.
Message-Id: <20190409085245.31548-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test uses memwrite() and thus relies on global_qtest. Let's replace it
with qtest_memwrite(), so that we are independent from global_qtest here.
Message-Id: <20190409085245.31548-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Pass around the QTestState in the TestData, so we do not need the
global_qtest variable here anymore.
Message-Id: <20190409085245.31548-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test-qapi.py doesn't force a specific encoding for stderr or
stdout, but the reference files used by check-qapi-schema are in
UTF-8. This breaks check-qapi-schema under certain circumstances
(e.g. if using the C locale and Python < 3.7).
We need to make sure test-qapi.py always generate UTF-8 output
somehow. On Python 3.7+ we can do it using
`sys.stdout.reconfigure(...)`, but we need a solution that works
with older Python versions.
Instead of trying a hack like reopening sys.stdout and
sys.stderr, we can just tell Python to use UTF-8 for I/O encoding
when running test-qapi.py. Do it by setting PYTHONIOENCODING.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190506213817.14344-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A recent patch results in qemu-img reporting the backing file format of
vmdk images as vmdk. This broke iotests 110 and 126.
Fixes: 7502be838e
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190415154129.31021-1-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This requires some changes to keep iotests 104 and 207 working.
qemu-img info in 104 will now return a filename including the user name
and the port, which need to be filtered by adjusting REMOTE_TEST_DIR in
common.rc. This additional information has to be marked optional,
however (which is simple as REMOTE_TEST_DIR is a regex), because
otherwise 197 and 215 would fail: They use it (indirectly) to filter
qemu-img create output which contains a backing filename they have
passed to it -- which probably does not contain a user name or port
number.
The problem in 207 is a nice one to have: qemu-img info used to return
json:{} filenames, but with this patch it returns nice plain ones. We
now need to adjust the filtering to hide the user name (and port number
while we are at it). The simplest way to do this is to include both in
iotests.remote_filename() so that bdrv_refresh_filename() will not
change it, and then iotests.img_info_log() will filter it correctly
automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_inc_refcounts_imrt() (through realloc_refcount_array()) can eat
an unpredictable amount of memory on corrupted table entries, which are
referencing regions far beyond the end of file.
Prevent this, by skipping such regions from further processing.
Interesting that iotest 138 checks exactly the behavior which we fix
here. So, change the test appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
182 fails if qemu has no support for hotplugging of a virtio-blk device.
Using an NBD server instead works just as well for the test, even on
qemus without hotplugging support.
Fixes: 6d0a4a0fb5
Reported-by: Danilo C. L. de Paula <ddepaula@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190417153005.30096-1-mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For some particular configurations of ext4, sizing an image to 84
sectors + 1 byte causes test failures when the size of the hole is
rounded to a 4k alignment. Let's instead size things to 128 sectors +
1 byte, as the 64k boundary is more likely to work with various hole
granularities.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190506172111.31594-1-eblake@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
The output of qemu-io changed recently - most tests have been fixed in
commit 36b9986b08 ("tests/qemu-iotests: Fix output of qemu-io
related tests") already, but a qcow1, vmdk, and nbd test were still missing.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190501134127.21104-1-thuth@redhat.com>
[eblake: squash in NBD 083 fixes]
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
233 generally filters the port, but in two cases does not. If some
other concurrently running application has already taken port 10809,
this will result in an output mismatch. Fix this by applying the
filter in these two cases, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190506160529.6955-1-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
-----BEGIN PGP SIGNATURE-----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=GuGy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-05-02
* configure: automatically pick python3 is available
(Daniel P. Berrangé)
* tests/acceptance (Cleber Rosa, Philippe Mathieu-Daudé):
* Multi-architecture test support
* Multiple arch-specific boot_linux_console test cases
* Increase verbosity of avocado by default
* docstring improvements
# gpg: Signature made Fri 03 May 2019 01:40:06 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
configure: automatically pick python3 is available
tests/boot_linux_console: add a test for alpha + clipper
tests/boot_linux_console: add a test for s390x + s390-ccw-virtio
tests/boot_linux_console: add a test for arm + virt
tests/boot_linux_console: add a test for aarch64 + virt
tests/boot_linux_console: add a test for mips64el + malta
tests/boot_linux_console: add a test for mips + malta
scripts/qemu.py: support adding a console with the default serial device
tests/boot_linux_console: refactor the console watcher into utility method
tests/boot_linux_console: increase timeout
tests/boot_linux_console: add common kernel command line options
tests/boot_linux_console: update the x86_64 kernel
tests/boot_linux_console: rename the x86_64 after the arch and machine
tests/acceptance: look for target architecture in test tags first
tests/acceptance: use "arch:" tag to filter target specific tests
tests/acceptance: introduce arch parameter and attribute
tests/acceptance: fix doc reference to avocado_qemu directory
tests/acceptance: improve docstring on pick_default_qemu_bin()
tests/acceptance: show avocado test execution by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# configure
Rebuild the "bios-tables-test" UEFI boot images with the SMBIOS entry
point reporting that has been added in the previous patch.
Cc: "Philippe Mathieu-Daud" <philmd@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Launchpad: https://bugs.launchpad.net/qemu/+bug/1821884
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
On UEFI systems, the SMBIOS entry point (a.k.a. anchor) structures are
found similarly to the ACPI RSD PTR table(s): by scanning the
ConfigurationTable array in the EFI system table for well-known GUIDs.
Locate the SMBIOS 2.1 (32-bit) and 3.0 (64-bit) anchors in the
BiosTablesTest UEFI application, and report the addresses in new fields
appended to the BIOS_TABLES_TEST structure.
Cc: "Philippe Mathieu-Daud" <philmd@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Launchpad: https://bugs.launchpad.net/qemu/+bug/1821884
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. One extra command added to
the QEMU command line is '-vga std', because the kernel used is
known to crash without it.
If alpha is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:alpha" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:alpha tests/acceptance
$ avocado run -t machine:clipper tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-21-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a s390x target
using the s390-ccw-virtio machine.
Because it's not possible to have multiple VT220 consoles,
'-nodefaults' is used, so that the one set with set_console() works
correctly.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-20-crosa@redhat.com>
[ehabkost: Updated kernel URL to point to fedoraproject.org]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on an arm target
using the virt machine.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-19-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like the previous tests, boots a Linux kernel on a aarch64 target
using the virt machine.
One special option added is the CPU type, given that the kernel
selected fails to boot on the virt machine's default CPU (cortex-a15).
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20190312171824.5134-18-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working.
If mips64el is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips64el"
tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips64el tests/acceptance
$ avocado run -t machine:malta tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <20190312171824.5134-15-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to the x86_64 + pc test, it boots a Linux kernel on a Malta
board and verify the serial is working. Also, it relies on the serial
device set by the machine itself.
If mips is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:mips" tags.
Alternatively, this test can be run using:
$ avocado run -t arch:mips tests/acceptance
$ avocado run -t machine:malta tests/acceptance
$ avocado run -t endian:big tests/acceptance
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190312171824.5134-14-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This introduces a utility method that monitors the console device and
looks for either a message that signals the test success or failure.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-12-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When running on very low powered environments, some tests may time out
causing false negatives. As a conservative change, and for
considering that human time (investigating false negatives) is worth
more than some extra machine cycles (and time), let's increase the
overall timeout.
CC: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-11-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'printk.time=0' option makes it easier to parse the console
output. Let's set it as a default, and reusable, kernel command line
options for this and future similar tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-10-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update to the stock Fedora 29 kernel, from the Fedora 28. New tests
will be added using the 29 kernel, so for consistency, let's also
update it here.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190312171824.5134-9-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Given that the test is specific to x86_64 and pc, and new tests are
going to be added to the same class, let's rename it accordingly.
Also, let's make the class documentation not architecture specific.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-8-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A test can, optionally, be tagged for one or many architectures. If a
test has been tagged for a single architecture, there's a high chance
that the test won't run on other architectures. This changes the
default order of choosing a default target architecture to use based
on the 'arch' tag value first.
The precedence order is for choosing a QEMU binary to use for a test
is now:
* qemu_bin parameter
* arch parameter
* arch tag value (for example, x86_64 if "🥑 tags=arch:x86_64
is used)
This means that if one runs:
$ avocado run -p qemu_bin=/usr/bin/qemu-system-x86_64 test.py
No arch parameter or tag will influence the selection of the QEMU
target binary. If one runs:
$ avocado run -p arch=ppc64 test.py
The target binary selection mechanism will attempt to find a binary
such as "ppc64-softmmu/qemu-system-ppc64". And finally, if one runs
a test that is tagged (in its docstring) with "arch:aarch64":
$ avocado run aarch64.py
The target binary selection mechanism will attempt to find a binary
such as "aarch64-softmmu/qemu-system-aarch64".
At this time, no provision is made to cancel the execution of tests if
the arch parameter given (manually) does not match the test "arch"
tag, but it may be a useful default behavior to be added in the
future.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-7-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's useful to define the architecture that should be used in
situations such as:
* the intended target of the QEMU binary to be used on tests
* the architecture of code to be run within the QEMU binary, such
as a kernel image or a full blown guest OS image
This commit introduces both a test parameter and a test instance
attribute, that will contain such a value.
Now, when the "arch" test parameter is given, it will influence the
selection of the default QEMU binary, if one is not given explicitly
by means of the "qemu_img" parameter.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-5-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Making it clear what is returned by this utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a gva2gpa command purely for debug which performs
address translation on the gva, the existing gpa2hva
command can then also be used to find it in the qemu
userspace; e.g.
(qemu) info registers
.... RSP=ffffffff81c03e98
....
(qemu) gva2gpa 0xffffffff81c03e98
gpa: 0x1c03e98
(qemu) gpa2hva 0x1c03e98
Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98
(qemu) x/10x 0xffffffff81c03e98
ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
ffffffff81c03eb8: 0x81c03ec8 0xffffffff
gdb -p ...qemu...
(gdb) x/10x 0x7f0599a03e98
0x7f0599a03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
0x7f0599a03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
0x7f0599a03eb8: 0x81c03ec8 0xffffffff
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190412152652.827-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
qemu-img create allows giving just a format and "-o help" to get a list
of the options supported by that format. Users may not realize that the
protocol level may offer even more options, which they only get to see
by specifying a filename.
This patch adds a note to hint at that fact.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
