All memory DRC objects are created during machine init. It is thus safe
to assume spapr_drc_by_id() cannot return NULL when hot-plug/unplugging
memory.
Make this clear with an assertion, like the code already does a few lines
above when looping over memory DRCs. This fixes Coverity reports 1437757
and 1437758.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160805381160.228955.5388294067094240175.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch the bamboo board to directly creating and configuring the UIC,
rather than doing it via the old ppcuic_init() helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212001537.24520-5-peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch the virtex_ml507 board to directly creating and
configuring the UIC, rather than doing it via the old
ppcuic_init() helper function.
This fixes a trivial Coverity-detected memory leak where
we were leaking the array of IRQs returned by ppcuic_init().
Fixes: Coverity CID 1421992
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212001537.24520-4-peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the PPC UIC ("Universal Interrupt Controller") is implemented
as a non-QOM device in ppc4xx_devs.c. Convert it to a proper QOM device
in hw/intc.
The ppcuic_init() function is retained for the moment with its current
interface; in subsequent commits this will be tidied up to avoid the
allocation of an irq array.
This conversion adds VMState support.
It leaves the LOG_UIC() macro as-is to maximise the extent to which
this is simply code-movement rather than a rewrite (in new code it
would be better to use tracepoints).
The default property values for dcr-base and use-vectors are set to
match those use by most of our boards with a UIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212001537.24520-3-peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a following commit we will move the PPC UIC implementation to
its own file in hw/intc. To prevent checkpatch complaining about that
code-motion, fix up the minor style issues first.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201212001537.24520-2-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Machine options can be retrieved as properties of the machine object.
Encourage that by removing the "easy" accessor to machine options.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since NVDIMM support was introduced on pseries machine,
it ignored machine's nvdimm=on|off option and effectively
was always enabled on machines that support NVDIMM.
Later on commit
(28f5a71621 ppc/spapr_nvdimm: do not enable support with 'nvdimm=off')
makes QEMU error out in case user explicitly set 'nvdimm=off'
on CLI by peeking at machine_opts.
However that's a workaround and leaves 'nvdimms_state->is_enabled'
in inconsistent state (false) when it should be set true
by default.
Instead of using on machine_opts, set default to true for pseries
machine in initfn time. If user sets manually 'nvdimm=off'
it will overwrite default value to false and QEMU will error
as expected without need to peek into machine_opts.
That way pseries will have, nvdimm enabled by default and
will honor user provided 'nvdimm=on|off'.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201208164606.4109134-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spapr_kvm_type() is considering 'vm_type=NULL' as a valid input, where
the function returns 0. This is relying on the current QEMU machine
options handling logic, where the absence of the 'kvm-type' option
will be reflected as 'vm_type=NULL' in this function.
This is not robust, and will break if QEMU options code decides to propagate
something else in the case mentioned above (e.g. an empty string instead
of NULL).
Let's avoid this entirely by setting a non-NULL default value in case of
no user input for 'kvm-type'. spapr_kvm_type() was changed to handle 3 fixed
values of kvm-type: "auto", "hv", and "pr", with "auto" being the default
if no kvm-type was set by the user. This allows us to always be predictable
regardless of any enhancements/changes made in QEMU options mechanics.
While we're at it, let's also document in 'kvm-type' description the
already existing default mode, now named 'auto'. The information provided
about it is based on how the pseries kernel handles the KVM_CREATE_VM
ioctl(), where the default value '0' makes the kernel choose an available
KVM module to use, giving precedence to kvm_hv. This logic is described in
the kernel source file arch/powerpc/kvm/powerpc.c, function kvm_arch_init_vm().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20201210145517.1532269-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Some functions in hw/ppc/spapr_events.c get a pointer to the machine
state using qdev_get_machine(). Convert them to get it from their
caller when possible.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-6-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_phb_realize() passes the sPAPR machine state as opaque data
for the I/O callbacks:
memory_region_init_io(&sphb->msiwindow, OBJECT(sphb), &spapr_msi_ops, spapr,
^^^^^
"msi", msi_window_size);
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to drop a user of qdev_get_machine().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201209170052.1431440-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When running qom-test, a memory leak occurred in the ppce500_init function,
this patch free irqs array to fix it.
ASAN shows memory leak stack:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0xfffc5ceee1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0)
#1 0xfffc5c806800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800)
#2 0xaaacf9999244 in ppce500_init qemu/hw/ppc/e500.c:859
#3 0xaaacf97434e8 in machine_run_board_init qemu/hw/core/machine.c:1134
#4 0xaaacf9c9475c in qemu_init qemu/softmmu/vl.c:4369
#5 0xaaacf94785a0 in main qemu/softmmu/main.c:49
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201204075822.359832-1-ganqixin@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A guest with enough RAM, eg. 128G, is likely to detect savevm downtime
and to complain about stalled CPUs. This happens because we re-read
the timebase just before migrating it and we thus don't account for
all the time between VM stop and pre-save.
A very similar situation was already addressed for live migration of
paused guests (commit d14f339762). Extend the logic to do the same
with savevm.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1893787
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160693010619.1111945.632640981169395440.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All users are passing &error_abort already. Document the fact
that spapr_drc_attach() should only be passed a free DRC, which
is supposedly the case if appropriate checking is done earlier.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-5-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug() already guarantees that the slot for the given core
ID is available. It is thus safe to assume that spapr_find_cpu_slot()
returns a slot during plug. Turn the error path into an assertion.
It is also safe to assume that no device is attached to the corresponding
DRC and that spapr_drc_attach() shouldn't fail.
Pass &error_abort to spapr_drc_attach() and simplify error handling.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-4-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU is hot-plugged, we set its compat mode to match the boot
CPU, which was either set by machine reset or by CAS. This is currently
handled in the plug handler after the core got realized. Potential errors
of ppc_set_compat() are propagated to the hot-plug logic.
Handling errors this late in the hot-plug sequence is generally frown
upon. Ideally, we should do sanity checks in a pre-plug handler and pass
&error_abort to ppc_set_compat() in the plug handler.
We can filter out some error cases of ppc_set_compat() by calling
ppc_check_compat() at pre-plug. But ppc_set_compat() also sets the
compat register in KVM, and KVM doesn't provide any API that would
allow to check valid compat mode settings beforehand.
However, at this point we know that the compat mode was already
successfully set for the boot CPU. Since this all boils down to
setting a register with the very same value that was valid
for the boot CPU, it should definitely not fail for hot-plugged
CPUS.
Pass &error_abort to ppc_set_compat().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This hack registers dummy VMState entries of ICPs in order to
support migration of old pseries machine types that used to
create all smp.max_cpus possible ICPs at machine init.
Part of the work is to unregister the dummy entries when plugging
an actual vCPU core, and to register them back when unplugging the
core. The code that unregisters the dummy ICPs in spapr_core_plug()
is misplaced: if ppc_set_compat() fails afterwards, the hotplug
operation will be cancelled and the dummy ICPs won't be registered
back since the unplug handler isn't called.
Unregister the dummy ICPs at the end of spapr_core_plug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201201113728.885700-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The '%u' conversion specifier is for decimal notation.
When prefixing a format with '0x', we want the hexadecimal
specifier ('%x').
Inspired-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201103112558.2554390-4-philmd@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning:
hw/ppc/ppc.c: In function ‘ppc6xx_set_irq’:
hw/ppc/ppc.c:118:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
118 | if (level) {
| ^
hw/ppc/ppc.c:123:9: note: here
123 | case PPC6xx_INPUT_INT:
| ^~~~
According to the discussion, a break statement needs to be added here.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20201116024810.2415819-7-kuhn.chenqun@huawei.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There can be only one TPM proxy at a time. This is currently
checked at plug time. But this can be detected at pre-plug in
order to error out earlier.
This allows to get rid of error handling in the plug handler.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-9-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We currently detect that a PHB index is already in use at plug time.
But this can be decteted at pre-plug in order to error out earlier.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-8-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Read documentation in "qapi/error.h" and changelog of commit
e3fe3988d7 ("error: Document Error API usage rules") for
rationale.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-7-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Pre-plug of a memory device, be it an NVDIMM or a PC-DIMM, ensures
that the memory slot is available and that addresses don't overlap
with existing memory regions. The corresponding DRCs in the LMB
and PMEM namespaces are thus necessarily attachable at plug time.
Pass &error_abort to spapr_drc_attach() in spapr_add_lmbs() and
spapr_add_nvdimm(). This allows to greatly simplify error handling
on the plug path.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-3-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PHB acts as the hotplug handler for PCI devices. It does some
sanity checks on DR enablement, PCI bridge chassis numbers and
multifunction. These checks are currently performed at plug time,
but they would best sit in a pre-plug handler in order to error
out as early as possible.
Create a spapr_pci_pre_plug() handler and move all the checking
there. Add a check that the associated DRC doesn't already have
an attached device. This is equivalent to the slot availability
check performed by do_pci_register_device() upon realization of
the PCI device.
This allows to pass &error_abort to spapr_drc_attach() and to end
up with a plug handler that doesn't need to report errors anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120234208.683521-2-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Never used from the start.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201120174646.619395-6-groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
serial_hd(i) is NULL if and only if i >= serial_max_hds(). Test
serial_hd(i) instead of bounding the loop at serial_max_hds(),
thus removing one more function that vl.c is expected to export.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20201026143028.3034018-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201109173928.1001764-1-cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can tell between regular IOMMUTLBEntry (entry of IOMMU
hardware) and notifications.
In the notifications, we set explicitly if it is a MAPs or an UNMAP,
instead of trusting in entry permissions to differentiate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201019061126.3102-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201016145346.27167-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
HPT resizing is asynchronous: the guest first kicks off the creation of a
new HPT, then it waits for that new HPT to be actually created and finally
it asks the current HPT to be replaced by the new one.
In the case of a userland allocated HPT, this currently relies on calling
qemu_memalign() which aborts on OOM and never returns NULL. Since we seem
to have path to report the failure to the guest with an H_NO_MEM return
value, use qemu_try_memalign() instead of qemu_memalign().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160398563636.32380.1747166034877173994.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sometimes QEMU needs to allocate the HPT in userspace, namely with TCG
or PR KVM. This is performed with qemu_memalign() because of alignment
requirements. Like glib's allocators, its behaviour is to abort on OOM
instead of returning NULL.
This could be changed to qemu_try_memalign(), but in the specific case
of spapr_reallocate_hpt(), the outcome would be to terminate QEMU anyway
since no HPT means no MMU for the guest. Drop the dead code instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160398562892.32380.15006707861753544263.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_reallocate_hpt() has three users, two of which pass &error_fatal
and the third one, htab_load(), passes &local_err, uses it to detect
failures and simply propagates -EINVAL up to vmstate_load(), which will
cause QEMU to exit. It is thus confusing that spapr_reallocate_hpt()
doesn't return right away when an error is detected in some cases. Also,
the comment suggesting that the caller is welcome to try to carry on
seems like a remnant in this respect.
This can be improved:
- change spapr_reallocate_hpt() to always report a negative errno on
failure, either as reported by KVM or -ENOSPC if the HPT is smaller
than what was asked,
- use that to detect failures in htab_load() which is preferred over
checking &local_err,
- propagate this negative errno to vmstate_load() because it is more
accurate than propagating -EINVAL for all possible errors.
[dwg: Fix compile error due to omitted prelim patch]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371605460.305923.5890143959901241157.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If kvmppc_load_htab_chunk() fails, its return value is propagated up
to vmstate_load(). It should thus be a negative errno, not -1 (which
maps to EPERM and would lure the user into thinking that the problem
is necessarily related to a lack of privilege).
Return the error reported by KVM or ENOSPC in case of short write.
While here, propagate the error message through an @errp argument
and have the caller to print it with error_report_err() instead
of relying on fprintf().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371604713.305923.5264900354159029580.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hints should be added with the dedicated error_append_hint() API
because we don't want to print them when using QMP. This requires
to insert ERRP_GUARD as explained in "qapi/error.h".
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160371604030.305923.17464161378167312662.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As recommended in "qapi/error.h", add a bool return value to
spapr_add_lmbs() and spapr_add_nvdimm(), and use them instead
of local_err in spapr_memory_plug().
This allows to get rid of the error propagation overhead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309734178.2739814.3488437759887793902.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both PC_DIMM_SLOT_PROP and PC_DIMM_ADDR_PROP are defined in the
default property list of the PC DIMM device class:
DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0),
DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot,
PC_DIMM_UNASSIGNED_SLOT),
They should thus be always gettable for both PC DIMMs and NVDIMMs.
An error in getting them can only be the result of a programming
error. It doesn't make much sense to propagate the error in this
case. Abort instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309732180.2739814.7243774674998010907.stgit@bahia.lan>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC_DIMM_SLOT_PROP property is defined as:
DEFINE_PROP_INT32(PC_DIMM_SLOT_PROP, PCDIMMDevice, slot,
PC_DIMM_UNASSIGNED_SLOT),
Use object_property_get_int() instead of object_property_get_uint().
Since spapr_memory_plug() only gets called if pc_dimm_pre_plug()
succeeded, we expect to have a valid >= 0 slot number, either because
the user passed a valid slot number or because pc_dimm_get_free_slot()
picked one up for us.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309730758.2739814.15821922745424652642.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PC_DIMM_ADDR_PROP property is defined as:
DEFINE_PROP_UINT64(PC_DIMM_ADDR_PROP, PCDIMMDevice, addr, 0),
Use object_property_get_uint() instead of object_property_get_int().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309729609.2739814.4996614957953215591.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
pc_dimm_plug() doesn't use it. It only aborts on error.
Drop @errp and adapt the callers accordingly.
[dwg: Removed unused label to fix compile]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the error path of spapr_cpu_core_realize() is just to call
idempotent spapr_cpu_core_unrealize() for rollback, no need to create
and realize the vCPUs in two separate loops.
Merge them and do them same in spapr_cpu_core_unrealize() for symmetry.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279673321.1808373.2248221100790367912.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_cpu_core_realize() has a rollback path which partially duplicates
the code of spapr_cpu_core_unrealize().
Let's make spapr_cpu_core_unrealize() idempotent and call it instead. This
requires to:
- move the registration and unregistration of the reset handler around
but it is harmless,
- allocate the array of vCPUs with g_new0() to be able to filter out
unused slots,
- make sure to only unrealize vCPUs that have been already realized.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279672626.1808373.14142129300586424514.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'sc' argument is unused. Drop it.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279671929.1808373.10333672533575251075.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we introduced CPU hot-unplug in sPAPR, we don't unrealize the
vCPU objects explicitly. Instead, we let QOM handle that for us under
object_property_del_all() when the CPU core object is finalized. The
only thing we do is calling cpu_remove_sync() to tear the vCPU thread
down.
This happens to work but it is ugly because:
- we call qdev_realize() but the corresponding qdev_unrealize() is
buried deep in the QOM code
- we call cpu_remove_sync() to undo qemu_init_vcpu() called by
ppc_cpu_realize() in target/ppc/translate_init.c.inc
- the CPU init and teardown paths aren't really symmetrical
The latter didn't bite us so far but a future patch that greatly
simplifies the CPU core realize path needs it to avoid a crash
in QOM.
For all these reasons, have ppc_cpu_unrealize() to undo the changes
of ppc_cpu_realize() by calling cpu_remove_sync() at the right place,
and have the sPAPR CPU core code to call qdev_unrealize().
This requires to add a missing stub because translate_init.c.inc is
also compiled for user mode.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279671236.1808373.14732005038172874990.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When a CPU core is being removed, the machine specific data of each
CPU thread object is leaked.
Fix this by calling the dedicated helper we have for that instead of
simply unparenting the CPU object. Call it from a separate loop in
spapr_cpu_core_unrealize() for symmetry with spapr_cpu_core_realize().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160279670540.1808373.17319746576919615623.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
