We don't join the listen thread, it does its own cleanup.
Mark as detached not joinable.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-2-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
MigrationState is destroyed before we can come into bottom half.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1457537708-8622-1-git-send-email-den@openvz.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
max_len is not necessary, while it brings a warning during compilation
when specify "-Wstack-usage=1000000". Replacing using sizeof().
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1457503932-31763-1-git-send-email-peterx@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The headers in include/hw/vfio/ should be listed in the VFIO
section of the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Devices like Intel graphics are known to not only have bad checksums,
but also the wrong device ID. This is not so surprising given that
the video BIOS is typically part of the system firmware image rather
that embedded into the device and needs to support any IGD device
installed into the system.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Match common vfio code with setup, exit, and finalize functions for
BAR, quirk, and VGA management. VGA is also changed to dynamic
allocation to match the other MemoryRegions.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Both platform and PCI vfio drivers create a "slow", I/O memory region
with one or more mmap memory regions overlayed when supported by the
device. Generalize this to a set of common helpers in the core that
pulls the region info from vfio, fills the region data, configures
slow mapping, and adds helpers for comleting the mmap, enable/disable,
and teardown. This can be immediately used by the PCI MSI-X code,
which needs to mmap around the MSI-X vector table.
This also changes VFIORegion.mem to be dynamically allocated because
otherwise we don't know how the caller has allocated VFIORegion and
therefore don't know whether to unreference it to destroy the
MemoryRegion or not.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu_chr_open_socket_fd method takes care of either doing a
synchronous socket connect, or creating a listener socket. Part
of the work when creating the listener socket is to register a
watch for incoming clients. The caller of qemu_chr_open_socket_fd
may not want this watch created, as it might be doing a synchronous
wait for the first client. Rather than passing yet more parameters
into qemu_chr_open_socket_fd to let it handle this, just remove
the qemu_chr_open_socket_fd method an inline its functionality
into the caller. This allows for a clearer control flow and shorter
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu_chr_open_socket_fd() method multiplexes three different
actions into one method. The socket_try_connect() method is one
of its callers, but it only ever want one specific action
performed. By inlining that action into socket_try_connect()
we see that there is not in fact any failure scenario, so there
is not even any reason for socket_try_connect to exist. Just
inline the asynchronous connection attempts directly at the
places that need them. This shortens & clarifies the code.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu_chr_finish_socket_connection method is multiplexing two
different actions into one method. Each caller of it though, only
wants one specific action. The code is shorter & clearer if we
thus remove the method and just inline the specific actions
where needed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 we cannot directly poll on socket handles. Instead we
create a Win32 event object and associate the socket handle with
the event. When the event signals readyness we then have to
use select to determine which events are ready. Creating Win32
events is moderately heavyweight, so we don't want todo it
every time we create a GSource, so this associates a single
event with a QIOChannel.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we now canonicalize WSAEWOULDBLOCK into EAGAIN there is
no longer any need to explicitly check EWOULDBLOCK for Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QIOChannelSocket code mistakenly uses the bare accept()
function which does not set SOCK_CLOEXEC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Sockets are not in the same namespace as file descriptors on Windows.
As an initial step, introduce separate APIs for file descriptor and
socket watches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s/write/read/ in the error message reported after
readmsg() fails
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When checking the results of an I/O operation test, assert that
the error objects are NULL before asserting on the content. This
is found to give more useful indication of the problem when
diagnosing test failures.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The reader thread was accidentally setting the error pointer
intended for the writer thread. If both threads set errors
this would result in QEMU abort'ing due to the error already
being set.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Exercise the GSource code for server sockets by calling
qio_channel_wait() prior to accepting the incoming client.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the QIOChannelSocket test we create a socket file
descriptor and then try to create a QIOChannelSocket.
This works on Linux, but fails on Win32 because it is
not valid to call getsockname() on an unbound socket.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The win32 sockets layer requires that socket_init() is called
otherwise nothing will work.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the test-io-channel-socket.c test uses getifaddrs
to see if an IPv4/6 address is present on any host NIC, as
a way to determine if IPv4/6 sockets can be used. This is
problematic because getifaddrs is not available on Win32.
Rather than testing indirectly via getifaddrs, just create
a socket and try to bind() to the loopback address instead.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Historically QEMU has had a socket_error() macro that was
defined to map to WSASocketError(). The os-win32.h header
file would define errno constants that mapped to the
WSA error constants. This worked fine with Mingw32 since
its header files never defined any errno values, nor did
it even provide an errno.h. So callers of socket_error()
could match on traditional Exxxx constants and it would
all "just work".
With Mingw64 though, things work rather differently. First
there is an errno.h file which defines all the traditional
errno constants you'd expect from a UNIX platform. There
is then a winerror.h which defined the WSA error constants.
Crucially the WSAExxxx errno values in winerror.h do not
match the Exxxx errno values in error.h.
If QEMU had only imported winerror.h it would still work,
but the qemu/osdep.h file unconditionally imports errno.h.
So callers of socket_error() will get now WSAExxxx values
back and compare them to the Exxx constants. This will
always fail silently at runtime.
To solve this QEMU needs to stop assuming the WSAExxxx
constant values match the Exxx constant values. Thus the
socket_error() macro is turned into a small function that
re-maps WSAExxxx values into Exxx.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for supporting capability chains on regions, wrap
ioctl(VFIO_DEVICE_GET_REGION_INFO) so we don't duplicate the code for
each caller.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio-pci currently requires a host= parameter, which comes in the
form of a PCI address in [domain:]<bus:slot.function> notation. We
expect to find a matching entry in sysfs for that under
/sys/bus/pci/devices/. vfio-platform takes a similar approach, but
defines the host= parameter to be a string, which can be matched
directly under /sys/bus/platform/devices/. On the PCI side, we have
some interest in using vfio to expose vGPU devices. These are not
actual discrete PCI devices, so they don't have a compatible host PCI
bus address or a device link where QEMU wants to look for it. There's
also really no requirement that vfio can only be used to expose
physical devices, a new vfio bus and iommu driver could expose a
completely emulated device. To fit within the vfio framework, it
would need a kernel struct device and associated IOMMU group, but
those are easy constraints to manage.
To support such devices, which would include vGPUs, that honor the
VFIO PCI programming API, but are not necessarily backed by a unique
PCI address, add support for specifying any device in sysfs. The
vfio API already has support for probing the device type to ensure
compatibility with either vfio-pci or vfio-platform.
With this, a vfio-pci device could either be specified as:
-device vfio-pci,host=02:00.0
or
-device vfio-pci,sysfsdev=/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0
or even
-device vfio-pci,sysfsdev=/sys/bus/pci/devices/0000:02:00.0
When vGPU support comes along, this might look something more like:
-device vfio-pci,sysfsdev=/sys/devices/virtual/intel-vgpu/vgpu0@0000:00:02.0
NB - This is only a made up example path
The same change is made for vfio-platform, specifying sysfsdev has
precedence over the old host option.
Tested-by: Eric Auger <eric.auger@linaro.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Let's use g_new0 to allocate cpu_states.
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As we now have the new machine definitions, that let us disable/enable
machine options more easily, we need a way to save them and make them
publicly available.
The new s390-virtio-ccw.h header exports the s390 ccw machine state
and class, so they can be easily used in other C files.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Most of the machine definition code looks the same between different
machine versions. The new DEFINE_CCW_MACHINE macro makes defining a
new machine easier by inserting standard machine version
definitions. This also makes it possible to propagate values between
machine versions.
The patch is inspired by code from hw/ppc/spapr.c
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We need to increment by the size of the structure, whereas 'ns' is 'uint8_t *'.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Implement cpu hotplug routine and add the machine hook.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-8-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Check for and propogate errors during s390 cpu creation.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-7-git-send-email-mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Link each CPUState as property machine/cpu[n] during initialization.
Add a hotplug handler to s390-virtio-ccw machine and set the
state during plug.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-6-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Once hotplug is enabled, interrupts may come in for CPUs
with an address > smp_cpus. Allocate for this and allow
search routines to look beyond smp_cpus.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-5-git-send-email-mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In preparation for hotplug, defer some CPU initialization
until the device is actually being realized, including
cpu_exec_init.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-4-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Both initial and hotplugged CPUs need to set the same initial
state.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-3-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Ensure a valid cpu_model is set upfront by setting the
default value directly into the MachineState when none is
specified. This is needed to ensure hotplugged CPUs share
the same cpu_model.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <1457112875-5209-2-git-send-email-mjrosato@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add support of escape sequence "\e[5n" and "\e[6n" to console.
"\e[5n" reports status of console and it always succeed
in virtual console.
"\e[6n" reports now cursor position in console.
Signed-off-by: Ren Kimura <rkx1209dev@gmail.com>
Message-id: 1457466681-7714-2-git-send-email-rkx1209dev@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
buffer_find_nonzero_offset() is a hot function during live migration.
Now it use SSE2 instructions for optimization. For platform supports
AVX2 instructions, use AVX2 instructions for optimization can help
to improve the performance of buffer_find_nonzero_offset() about 30%
comparing to SSE2.
Live migration can be faster with this optimization, the test result
shows that for an 8GiB RAM idle guest just boots, this patch can help
to shorten the total live migration time about 6%.
This patch use the ifunc mechanism to select the proper function when
running, for platform supports AVX2, execute the AVX2 instructions,
else, execute the original instructions.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1457416397-26671-3-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Detect if the compiler can support the ifun and avx2, if so, set
CONFIG_AVX2_OPT which will be used to turn on the avx2 instruction
optimization.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Message-Id: <1457416397-26671-2-git-send-email-liang.z.li@intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
I'd missed the sync count off in the postcopy case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-id: 1456394631-18010-1-git-send-email-dgilbert@redhat.com
Message-Id: <1456394631-18010-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>