Since Linux kernel 3.5, KVM has documented eax for leaf 0x40000000
to be KVM_CPUID_FEATURES:
57c22e5f35
But qemu still tries to set it to 0. It would be better to make qemu
and kvm consistent. This patch just fixes this issue.
Signed-off-by: Jidong Xiao <jidong.xiao@gmail.com>
[Include kvm_base in the value. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The latest Nvidia driver (337.88) specifically checks for KVM as the
hypervisor and reports Code 43 for the driver in a Windows guest when
found. Removing or changing the KVM signature is sufficient for the
driver to load and work. This patch adds an option to easily allow
the KVM hypervisor signature to be hidden using '-cpu kvm=off'. We
continue to expose KVM via the cpuid value by default. The state of
this option does not supercede or replace -enable-kvm or the accel=kvm
machine option. This only changes the visibility of KVM to the guest
and paravirtual features specifically tied to the KVM cpuid.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to keep that out of the function. The comment refers
to the disassembler's cc_op state rather than the CPUState field.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CS.RPL is not equal to the CPL in the few instructions between
setting CR0.PE and reloading CS. We get this right in the common
case, because writes to CR0 do not modify the CPL, but it would
not be enough if an SMI comes exactly during that brief period.
Were this to happen, the RSM instruction would erroneously set
CPL to the low two bits of the real-mode selector; and if they are
not 00, the next instruction fetch cannot access the code segment
and causes a triple fault.
However, SS.DPL *is* always equal to the CPL. In real processors
(AMD only) there is a weird case of SYSRET setting SS.DPL=SS.RPL
from the STAR register while forcing CPL=3, but we do not emulate
that.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During task switch, all of CS.DPL, CS.RPL, SS.DPL must match (in addition
to all the other requirements) and will be the new CPL. So far this worked
by carefully setting the CS selector and flags before doing the task
switch; but this will not work once we get the CPL from SS.DPL.
Temporarily assume that the CPL comes from CS.RPL during task switch
to a protected-mode task, until the descriptor of SS is loaded.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the next patch, these need to be correct or VM86 tasks
have the wrong CPL. The flags are basically what the Intel VMX
documentation say is mandatory for entry into a VM86 guest.
For consistency, SMM ought to have the same flags except with
CPL=0.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit fd460606fd moved setting of eflags above calls to
cpu_x86_load_seg_cache() in seg_helper.c. Unfortunately, in
do_interrupt_protected() this moved the clearing of VM_MASK above a
test for it.
Fix this regression by storing the value of VM_MASK at the start of
do_interrupt_protected().
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/kvm/uq/master:
pc: port 92 reset requires a low->high transition
cpu: make CPU_INTERRUPT_RESET available on all targets
apic: do not accept SIPI on the bootstrap processor
target-i386: preserve FPU and MSR state on INIT
target-i386: fix set of registers zeroed on reset
kvm: forward INIT signals coming from the chipset
kvm: reset state from the CPU's reset method
target-i386: the x86 CPL is stored in CS.selector - auto update hflags accordingly.
target-i386: set eflags prior to calling cpu_x86_load_seg_cache() in seg_helper.c
target-i386: set eflags and cr0 prior to calling cpu_x86_load_seg_cache() in smm_helper.c
target-i386: set eflags prior to calling svm_load_seg_cache() in svm_helper.c
pci-assign: limit # of msix vectors
pci-assign: Fix a bug when map MSI-X table memory failed
kvm: make one_reg helpers available for everyone
target-i386: Remove unused data from local array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the x86, some devices need access to the CPU reset pin (INIT#).
Provide a generic service to do this, using one of the internal
cpu_interrupt targets. Generalize the PPC-specific code for
CPU_INTERRUPT_RESET to other targets.
Since PPC does not support migration across QEMU versions (its
machine types are not versioned yet), I picked the value that
is used on x86, CPU_INTERRUPT_TGT_INT_1. Consequently, TGT_INT_2
and TGT_INT_3 are shifted down by one while keeping their value.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most MSRs, plus the FPU, MMX, MXCSR, XMM and YMM registers should not
be zeroed on INIT (Table 9-1 in the Intel SDM). Copy them out of
CPUX86State and back in, instead of special casing env->pat.
The relevant fields are already consecutive except PAT and SMBASE.
However:
- KVM and Hyper-V MSRs should be reset because they include memory
locations written by the hypervisor. These MSRs are moved together
at the end of the preserved area.
- SVM state can be moved out of the way since it is written by VMRUN.
Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BND0-3, BNDCFGU, BNDCFGS, BNDSTATUS were not zeroed on reset, but they
should be (Intel Instruction Set Extensions Programming Reference
319433-015, pages 9-4 and 9-6). Same for YMM.
XCR0 should be reset to 1.
TSC and TSC_RESET were zeroed already by the memset, remove the explicit
assignments.
Cc: Andreas Faerber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we have a CPU object with a reset method, it is better to
keep the KVM reset close to the CPU reset. Using qemu_register_reset
as we do now keeps them far apart.
With this patch, PPC no longer calls the kvm_arch_ function, so
it can get removed there. Other arches call it from their CPU
reset handler, and the function gets an ARMCPU/X86CPU/S390CPU.
Note that ARM- and s390-specific functions are called kvm_arm_*
and kvm_s390_*, while x86-specific functions are called kvm_arch_*.
That follows the convention used by the different architectures.
Changing that is the topic of a separate patch.
Reviewed-by: Gleb Natapov <gnatapov@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.
This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cpu_x86_load_seg_cache() function inspects eflags, so make sure
all changes to eflags are done prior to loading the segment caches.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cpu_x86_load_seg_cache() function inspects cr0 and eflags, so make
sure all changes to eflags and cr0 are done prior to loading the
segment caches.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The svm_load_seg_cache() function calls cpu_x86_load_seg_cache() which
inspects env->eflags. So, make sure all changes to eflags are done
prior to loading the segment cache.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Older Intel manuals (pre-2010) and current AMD manuals describe Z as
undefined, but newer Intel manuals describe Z as unchanged.
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the ObjectProperty set() methods are
merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The subsection already exists in one well-known enterprise Linux
distribution, but for some strange reason the fields were swapped
when forward-porting the patch to upstream.
Limit headaches for said enterprise Linux distributor when the
time will come to rebase their version of QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1396452782-21473-1-git-send-email-pbonzini@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux guests, when using more than 4GB of RAM, may end up using 1GB pages
to store (kernel) data. When this happens, we're unable to debug a running
Linux kernel with GDB:
(gdb) p node_data[0]->node_id
Cannot access memory at address 0xffff88013fffd3a0
(gdb)
GDB returns this error because x86_cpu_get_phys_page_debug() doesn't support
translating 1GB pages in IA-32e paging mode and returns an error to GDB.
This commit adds support for 1GB page translation for IA32e paging.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add 'U' suffixes where necessary to avoid (1 << 31) which
shifts left into the sign bit, which is undefined behaviour.
Add the suffix also for other constants in the same groupings
even if they don't shift into bit 31, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that while such functions may exist both for *-user and softmmu,
only *-user uses the CPUState hook, while softmmu reuses the prototype
for calling it directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Adapt the X86CPU implementation to suit the generic hook.
This involves a cleanup of error handling to cope with NULL errp.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Register separate QOM types for each x86 CPU model.
This will allow management code to more easily probe what each CPU model
provides, by simply creating objects using the appropriate class name,
without having to restart QEMU.
This also allows us to eliminate the qdev_prop_set_globals_for_type()
hack to set CPU-model-specific global properties.
Instead of creating separate class_init functions for each class, I just
used class_data to store a pointer to the X86CPUDefinition struct for
each CPU model. This should make the patch shorter and easier to review.
Later we can gradually convert each X86CPUDefinition field to lists of
per-class property defaults.
The "host" CPU model is special, as the feature flags depend on KVM
being initialized. So it has its own class_init and instance_init
function, and feature flags are set on instance_init instead of
class_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Limit the host CPU type to CONFIG_KVM as build fix]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When on KVM mode, enable x2apic by default on all CPU models.
Normally we try to keep the CPU model definitions as close as the real
CPUs as possible, but x2apic can be emulated by KVM without host CPU
support for x2apic, and it improves performance by reducing APIC access
overhead. x2apic emulation is available on KVM since 2009 (Linux
2.6.32-rc1), there's no reason for not enabling x2apic by default when
running KVM.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We will later make the KVM-specific code affect other feature words,
too.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some of my recent changes introduced variable declarations in the middle
of code blocks.
Fix the code so that it compiles without warnings when using
-Wdeclaration-after-statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As the new X86CPU subclass code is going to change lots of the code
invoving x86_def_t, let's rename the struct to match coding style first.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
As we will initialize the X86CPU fields on instance_init eventually,
move the code that initializes the X86CPU data based on the CPU model
name closer to the object_new() call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There isn't any kind of "registration" involved in cpu_x86_register()
anymore: it is simply looking up a CPU model name and loading the model
definition data into the X86CPU object. Rename it to x86_cpu_load_def()
to reflect what it does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
