Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
-----BEGIN PGP SIGNATURE-----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=AHrx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging
ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze. Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close. And the freeze crept up on me, like
always.
Most of the changes here are bugfixes in any case. There are some
cleanups as well, which have been in my staging tree for a little
while. There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.
Higlights are:
* Mac platform improvements from Mark Cave-Ayland
* Sam460ex improvements from BALATON Zoltan et al.
* XICS interrupt handler cleanups from Cédric Le Goater
* TCG improvements for atomic loads and stores from Richard
Henderson
* Assorted other bugfixes
# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
ppc: Include vga cirrus card into the compiling process
target/ppc: Relax reserved bitmask of indexed store instructions
target/ppc: set is_jmp on ppc_tr_breakpoint_check
spapr: compute default value of "hpt-max-page-size" later
target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
ppc440_uc: Basic emulation of PPC440 DMA controller
sam460ex: Add RTC device
hw/timer: Add basic M41T80 emulation
ppc4xx_i2c: Rewrite to model hardware more closely
hw/ppc: Give sam46ex its own config option
fpu_helper.c: fix setting FPSCR[FI] bit
target/ppc: Implement the rest of gen_st_atomic
target/ppc: Implement the rest of gen_ld_atomic
target/ppc: Use atomic min/max helpers
target/ppc: Use MO_ALIGN for EXIWX and ECOWX
target/ppc: Split out gen_st_atomic
target/ppc: Split out gen_ld_atomic
target/ppc: Split out gen_load_locked
target/ppc: Tidy gen_conditional_store
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/ppc/spapr.c
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbOtJPAAoJEKeha0olJ0NqEvwH/3FwWnlBdBvdYGgPjzGE1Atm
ofCKcyxE/2VJtxeWlZQHzs1VqSq81s7am5SdzOrIWnQekvHFcLu6/71RABiauzMd
neCvVOrXOVdktj1i1Z2Gg4BgjDmqbTDlo5ssVh/oXP0Zebi6OZFfQrB7y3cGBvui
4XI7lW9qJxt6F1FlKloXnofWRDENyo5vgdz6QjQXfauthw2T5045RIPTfiz03FCp
fbs+6K0+bKxfPdNLrqxxOZo/loYnEXbDYv6VBAIWBqztXVnMHxCqnh0YN05jwsfF
TRW0/YT8lpWarOZ1soIC6a/OGXQZbxgRhZ+Zr+Wa2jw0YNHJanU9isxi37aUqQo=
=Xivx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-07-02' into staging
nbd patches for 2018-07-02
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
# gpg: Signature made Tue 03 Jul 2018 02:33:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-07-02:
iotests: New test 223 for exporting dirty bitmap over NBD
nbd/client: Add x-dirty-bitmap to query bitmap from server
iotests: add 222 to test basic fleecing
blockdev: enable non-root nodes for backup source
iscsi: Avoid potential for get_status overflow
nbd/server: Fix dirty bitmap logic regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move global_vmstate from vga_common_init() parameter to VGACommonState
field. Set global_vmstate to true for isa vga devices, so nothing
changes here. virtio-vga and secondary-vga already set global_vmstate
to false so no change here either. All other pci vga devices get a new
global-vmstate property, defaulting to false. A compat property flips
it to true for older machine types.
With this in place you don't get a vmstate section naming conflict any
more when adding multiple pci vga devices to your vm.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
This semantics is needed by drive-backup so implement it before using
this API there.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-3-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Rewrite to make it closer to how real device works so that guest OS
drivers can access I2C devices. Previously this was only a hack to
allow U-Boot to get past accessing SPD EEPROMs but to support other
I2C devices and allow guests to access them we need to model real
device more properly.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Just like for the realize handlers, this makes possible to move the
common ICSState code of the reset handlers in the ics-base class.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes possible to move the common ICSState code of the realize
handlers in the ics-base class.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This changes the ICP realize and reset handlers in DeviceRealize and
DeviceReset handlers. parent handlers are now called from the
inheriting classes which is a cleaner object pattern.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
The condition to check whether an address has hit against a particular
TLB entry is not completely trivial. We do this in various places, and
in fact in one place (get_page_addr_code()) we have got the condition
wrong. Abstract it out into new tlb_hit() and tlb_hit_page() inline
functions (one for a known-page-aligned address and one for an
arbitrary address), and use them in all the places where we had the
condition correct.
This is a no-behaviour-change patch; we leave fixing the buggy
code in get_page_addr_code() to a subsequent patch.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180629162122.19376-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
-----BEGIN PGP SIGNATURE-----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=GF+m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180702' into staging
s390x updates:
- add bpb/ppa15 features to default cpu model for z196 and later
- rework TOD handling and fix cpu hotplug under tcg
- various fixes
# gpg: Signature made Mon 02 Jul 2018 12:09:40 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180702:
s390x/tcg: fix locking problem with tcg_s390_tod_updated
s390x/kvm: indicate alignment in legacy_s390_alloc()
s390x/kvm: legacy_s390_alloc() only supports one allocation
s390x/tcg: fix CPU hotplug with single-threaded TCG
s390x/tcg: rearm the CKC timer during migration
s390x/tcg: implement SET CLOCK
s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts
s390x/tcg: properly implement the TOD
s390x/tcg: drop tod_basetime
s390x/tod: factor out TOD into separate device
s390x/kvm: pass values instead of pointers to kvm_s390_set_clock_*()
s390x/tcg: avoid overflows in time2tod/tod2time
s390x/cpumodel: default enable bpb and ppa15 for z196 and later
loader: Check access size when calling rom_ptr() to avoid crashes
s390/ipl: fix ipl with -no-reboot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no need for a stub, since tb_invalidate_phys_addr can be excised
altogether when TCG is disabled. This is a bit cleaner since it avoids
using code that is clearly specific to user-mode emulation (it calls
mmap_lock/unlock) for the !CONFIG_TCG case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All files using "qemu/units.h" definitions already include it directly,
we can now remove it from "qemu/cutils.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180625124238.25339-41-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-39-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20180625124238.25339-35-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It eases code review, unit is explicit.
Patch generated using:
$ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/
and modified manually.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180625124238.25339-33-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Loosely based on 076b35b5a5.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180625124238.25339-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the --disable-tcg breakage introduced by 8bca9a03ec60d:
$ configure --disable-tcg
[...]
$ make -C i386-softmmu exec.o
make: Entering directory 'i386-softmmu'
CC exec.o
In file included from source/qemu/exec.c:62:0:
source/qemu/include/exec/ram_addr.h:96:6: error: conflicting types for ‘tb_invalidate_phys_range’
void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end);
^~~~~~~~~~~~~~~~~~~~~~~~
In file included from source/qemu/exec.c:24:0:
source/qemu/include/exec/exec-all.h:309:6: note: previous declaration of ‘tb_invalidate_phys_range’ was here
void tb_invalidate_phys_range(target_ulong start, target_ulong end);
^~~~~~~~~~~~~~~~~~~~~~~~
source/qemu/exec.c:1043:6: error: conflicting types for ‘tb_invalidate_phys_addr’
void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs)
^~~~~~~~~~~~~~~~~~~~~~~
In file included from source/qemu/exec.c:24:0:
source/qemu/include/exec/exec-all.h:308:6: note: previous declaration of ‘tb_invalidate_phys_addr’ was here
void tb_invalidate_phys_addr(target_ulong addr);
^~~~~~~~~~~~~~~~~~~~~~~
make: *** [source/qemu/rules.mak:69: exec.o] Error 1
make: Leaving directory 'i386-softmmu'
Tested to build x86_64-softmmu and i386-softmmu targets.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180629200710.27626-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now, each CPU has its own TOD. Especially, the TOD will differ
based on creation time of a CPU - e.g. when hotplugging a CPU the times
will differ quite a lot, resulting in stall warnings in the guest.
Let's use a single TOD by implementing our new TOD device. Prepare it
for TOD-clock epoch extension.
Most importantly, whenever we set the TOD, we have to update the CKC
timer.
Introduce "tcg_s390x.h" just like "kvm_s390x.h" for tcg specific
function declarations that should not go into cpu.h.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's treat this like a separate device. TCG will have to store the
actual state/time later on.
Include cpu-qom.h in kvm_s390x.h (due to S390CPU) to compile tod-kvm.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180627134410.4901-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The rom_ptr() function allows direct access to the ROM blobs that we
load during startup. However, there are currently no checks for the
size of the accesses, so it's currently possible to crash QEMU for
example with:
$ echo "Insane in the mainframe" > /tmp/test.txt
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -append xyz
Segmentation fault (core dumped)
$ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -initrd /tmp/test.txt
Segmentation fault (core dumped)
$ echo -n HdrS > /tmp/hdr.txt
$ sparc64-softmmu/qemu-system-sparc64 -kernel /tmp/hdr.txt -initrd /tmp/hdr.txt
Segmentation fault (core dumped)
We need a possibility to check the size of the ROM area that we want
to access, thus let's add a size parameter to the rom_ptr() function
to avoid these problems.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1530005740-25254-1-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
kexec/kdump as well as the bootloader use a subcode of diagnose 308
that is supposed to reset the I/O subsystem but not comprise a full
"reboot". With the latest refactoring this is now broken when
-no-reboot is used or when libvirt acts on a reboot QMP event, for
example a virt-install from iso images.
We need to mark these "subsystem resets" as special.
Fixes: a30fb811cb (s390x: refactor reset/reipl handling)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180622102928.173420-1-borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It was unclear before on what does the CLOSED event mean. Meanwhile we
add a TODO to fix up the CLOSED event in the future when the in/out
ports are different for a chardev.
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: "Marc-André Lureau" <marcandre.lureau@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180620073223.31964-2-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* last of the SVE patches; SVE is now enabled for aarch64 linux-user
* sd: Don't trace SDRequest crc field (coverity bugfix)
* target/arm: Mark PMINTENSET accesses as possibly doing IO
* clean up v7VE feature bit handling
* i.mx7d: minor cleanups
* target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space
* target/arm: Implement ARMv8.2-DotProd
* virt: add addresses to dt node names (which stops dtc from
complaining that they're not correctly named)
* cleanups: replace error_setg(&error_fatal) by error_report() + exit()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJbNkelAAoJEDwlJe0UNgzeB/wP/1WLIC2HD6jbYCPm/qW6fpXx
cUIRjvmodD8gVdJ8m5MVPQl1AdWVdVOGTStMdKNo4nWRuZyRKl3WvnZKoDQqj+fq
PahPUMEXGC14djhmMQ7XdDHFYFCtKOi/leZSSLw3nI1QVq+SSYOiWhqrUExLeMWb
xA25kzHhsNrTbwE7WxBz0dhtkX+QBy2CY11e1o3ONC5vJQhuXxLxPyEZZrQpj2yZ
9twZTcWwJ1FRlTNsGo26wNl65gC7RNAbts+fNa2gxFcwUfN2ioKKdI1iyQVvW7Mz
CwHoa7ghppyQ6hBT2U2O5nBJx72pdQaLae6mQ+FdIFTaoE05aoAQ+pUKZiv+JwTH
blZQZld03c80Rt6SBSVS7AU8l3A0T+cePqVMA2lv7NyGSyq4G8RjqtLIe++QGTIj
Lq9PDVh0evnFQY11RBvJYOit3l/gB6XtfnYo2+ePpCapr/cGmXzerr9kwcCr/D7I
jCQamPO0oxAIbvmqfc0feppWwFdI9qFbyKIRcQtb7uglN29z95ImNCq1tGYweQvy
/ApGLMrrcdtgF2Ok13ajM+Ge60QPZ0uB8EJoStZwOwFeIuEThdvS919q0BxmR/d3
eSwMj7ysf+UqPU9vkjtiXUyXl7r2iCbFoXcXIBsYE1Xpx1YYZKSThzMl7hqDWRGo
W+wtYk3PvdlAPTH/lg5D
=KZLT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180629' into staging
target-arm queue:
* last of the SVE patches; SVE is now enabled for aarch64 linux-user
* sd: Don't trace SDRequest crc field (coverity bugfix)
* target/arm: Mark PMINTENSET accesses as possibly doing IO
* clean up v7VE feature bit handling
* i.mx7d: minor cleanups
* target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space
* target/arm: Implement ARMv8.2-DotProd
* virt: add addresses to dt node names (which stops dtc from
complaining that they're not correctly named)
* cleanups: replace error_setg(&error_fatal) by error_report() + exit()
# gpg: Signature made Fri 29 Jun 2018 15:52:21 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180629: (55 commits)
target/arm: Add ID_ISAR6
target/arm: Prune a15 features from max
target/arm: Prune a57 features from max
target/arm: Fix SVE system register access checks
target/arm: Fix SVE signed division vs x86 overflow exception
sdcard: Use the ldst API
sd: Don't trace SDRequest crc field
target/arm: Mark PMINTENSET accesses as possibly doing IO
target/arm: Remove redundant DIV detection for KVM
target/arm: Add ARM_FEATURE_V7VE for v7 Virtualization Extensions
i.mx7d: Change IRQ number type from hwaddr to int
i.mx7d: Change SRC unimplemented device name from sdma to src
i.mx7d: Remove unused header files
target/arm: support reading of CNT[VCT|FRQ]_EL0 from user-space
target/arm: Implement ARMv8.2-DotProd
target/arm: Enable SVE for aarch64-linux-user
target/arm: Implement SVE dot product (indexed)
target/arm: Implement SVE dot product (vectors)
target/arm: Implement SVE fp complex multiply add (indexed)
target/arm: Pass index to AdvSIMD FCMLA (indexed)
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
soft-freeze, but I'd like these preparatory patches to be merged anyway.
-----BEGIN PGP SIGNATURE-----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=vVJr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
The Darwin host support still needs some more work. It won't make it for
soft-freeze, but I'd like these preparatory patches to be merged anyway.
# gpg: Signature made Fri 29 Jun 2018 11:39:04 BST
# gpg: using RSA key 71D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6
* remotes/gkurz/tags/for-upstream:
9p: darwin: Explicitly cast comparisons of mode_t with -1
cutils: Provide strchrnul
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This helper allows to retrieve the paths of nodes whose name
match node-name or node-name@unit-address patterns.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1530044492-24921-2-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This updates the minimum required glib version to 2.40
-----BEGIN PGP SIGNATURE-----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=8tKK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/min-glib-pull-request' into staging
glib: update the min required version
This updates the minimum required glib version to 2.40
# gpg: Signature made Fri 29 Jun 2018 12:24:58 BST
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/min-glib-pull-request:
glib: enforce the minimum required version and warn about old APIs
glib: bump min required glib library version to 2.40
util: remove redundant include of glib.h and add osdep.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all callers of vectored I/O have been converted
to use our preferred byte-based bdrv_co_p{read,write}v(), we can
delete the unused bdrv_co_{read,write}v().
Furthermore, this gets rid of the signature difference between the
public bdrv_co_writev() and the callback .bdrv_co_writev (the
latter still exists, because some drivers still need more work
before they are fully byte-based).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This moves the code to resize an image file to the thread pool to avoid
blocking.
Creating large images with preallocation with blockdev-create is now
actually a background job instead of blocking the monitor (and most
other things) until the preallocation has completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When growing an image, block drivers (especially protocol drivers) may
initialise the newly added area. I/O requests to the same area need to
wait for this initialisation to be completed so that data writes don't
get overwritten and reads don't read uninitialised data.
To avoid overhead in the fast I/O path by adding new locking in the
protocol drivers and to restrict the impact to requests that actually
touch the new area, reuse the existing tracked request infrastructure in
block/io.c and mark all discard requests as serialising.
With this change, it is safe for protocol drivers to make
.bdrv_co_truncate actually asynchronous.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the bdrv_truncate() implementation from block.c to block/io.c
so it can have access to the tracked requests infrastructure.
This involves making refresh_total_sectors() public (in block_int.h).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The error handling policy was traditionally set with -drive, but with
-blockdev it is no longer possible to set frontend options. scsi-disk
(and other block devices) have long supported qdev properties to
configure the error handling policy, so let's add these options to
usb-storage as well and just forward them to the internal scsi-disk
instance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
There are two useful macros that can be defined before including
glib.h that are related to the min required glib version
- GLIB_VERSION_MIN_REQUIRED
When this is defined, if code uses an API that was deprecated
in this version, or older, a compiler warning will be emitted.
This alerts maintainers to update their code to whatever new
replacement API is now recommended best practice.
- GLIB_VERSION_MAX_ALLOWED
When this is defined, if code uses an API that was introduced
in a version that is newer than the declared version, a compiler
warning will be emitted. This alerts maintainers if new code
accidentally uses functionality that won't be available on some
supported platforms.
The GLIB_VERSION_MAX_ALLOWED constant makes it a bit harder to opt
in to using specific new APIs with a GLIB_CHECK_VERSION conditional.
To workaround this Pragmas can be used to temporarily turn off the
-Wdeprecated-declarations compiler warning, while a static inline
compat function is implemented. This workaround is illustrated with the
implementation of the g_strv_contains method to satisfy the test suite.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-7: 2.50.3
Debian (Stretch): 2.50.3
Debian (Jessie): 2.42.1
OpenBSD (Ports): 2.54.3
FreeBSD (Ports): 2.50.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.42 is a reasonable target.
The GLibC compile farm, however, uses Ubuntu 14.04 (Trusty) which only
has glib 2.40.0, and this is needed for testing during merge. Thus an
exception is made to the documented platform support policy to allow for
all three current LTS releases to be supported.
Docker jobs that not longer satisfy this new min version are removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Code must only ever include glib.h indirectly via the glib-compat.h
header file, because we will need some macros set before glib.h is
pulled in. Adding extra includes of glib.h will (soon) cause compile
failures such as:
In file included from /home/berrange/src/virt/qemu/include/qemu/osdep.h:107,
from /home/berrange/src/virt/qemu/include/qemu/iova-tree.h:26,
from util/iova-tree.c:13:
/home/berrange/src/virt/qemu/include/glib-compat.h:22: error: "GLIB_VERSION_MIN_REQUIRED" redefined [-Werror]
#define GLIB_VERSION_MIN_REQUIRED GLIB_VERSION_2_40
In file included from /usr/include/glib-2.0/glib/gtypes.h:34,
from /usr/include/glib-2.0/glib/galloca.h:32,
from /usr/include/glib-2.0/glib.h:30,
from util/iova-tree.c:12:
/usr/include/glib-2.0/glib/gversionmacros.h:237: note: this is the location of the previous definition
# define GLIB_VERSION_MIN_REQUIRED (GLIB_VERSION_CUR_STABLE)
Furthermore, the osdep.h include should always be done directly from the
.c file rather than indirectly via any .h file.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VPD Block Limits Inquiry page is optional, allowing SCSI devices
to not implement it. This is the case for devices like the MegaRAID
SAS 9361-8i and Microsemi PM8069.
In case of SCSI passthrough, the response of this request is used by
the QEMU SCSI layer to set the max_io_sectors that the guest
device will support, based on the value of the max_sectors_kb that
the device has set in the host at that time. Without this response,
the guest kernel is free to assume any value of max_io_sectors
for the SCSI device. If this value is greater than the value from
the host, SCSI Sense errors will occur because the guest will send
read/write requests that are larger than the underlying host device
is configured to support. An example of this behavior can be seen
in [1].
A workaround is to set the max_sectors_kb host value back in the guest
kernel (a process that can be automated using rc.local startup scripts
and the like), but this has several drawbacks:
- it can be troublesome if the guest has many passthrough devices that
needs this tuning;
- if a change in max_sectors_kb is made in the host side, manual change
in the guests will also be required;
- during an OS install it is difficult, and sometimes not possible, to
go to a terminal and change the max_sectors_kb prior to the installation.
This means that the disk can't be used during the install process. The
easiest alternative here is to roll back to scsi-hd, install the guest
and then go back to SCSI passthrough when the installation is done and
max_sectors_kb can be set.
An easier way would be to QEMU handle the absence of the Block Limits
VPD device response, setting max_io_sectors accordingly and allowing
the guest to use the device without the hassle.
This patch adds emulation of the Block Limits VPD response for
SCSI passthrough devices of type TYPE_DISK that doesn't support
it. The following changes were made:
- scsi_handle_inquiry_reply will now check the available VPD
pages from the Inquiry EVPD reply. In case the device does not
- a new function called scsi_generic_set_vpd_bl_emulation,
that is called during device realize, was created to set a
new flag 'needs_vpd_bl_emulation' of the device. This function
retrieves the Inquiry EVPD response of the device to check for
VPD BL support.
- scsi_handle_inquiry_reply will now check the available VPD
pages from the Inquiry EVPD reply in case the device needs
VPD BL emulation, adding the Block Limits page (0xb0) to
the list. This will make the guest kernel aware of the
support that we're now providing by emulation.
- a new function scsi_emulate_block_limits creates the
emulated Block Limits response. This function is called
inside scsi_read_complete in case the device requires
Block Limits VPD emulation and we detected a SCSI Sense
error in the VPD Block Limits reply that was issued
from the guest kernel to the device. This error is
expected: we're reporting support from our side, but
the device isn't aware of it.
With this patch, the guest now queries the Block Limits
page during the device configuration because it is being
advertised in the Supported Pages response. It will either
receive the Block Limits page from the hardware, if it supports
it, or will receive an emulated response from QEMU. At any rate,
the guest now has the information to set the max_sectors_kb
parameter accordingly, sparing the user of SCSI sense errors
that would happen without the emulated response and in the
absence of Block Limits support from the hardware.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1566195
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1566195
Reported-by: Dac Nguyen <dacng@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20180627172432.11120-4-danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the VPD Block Limits emulation with SCSI passthrough,
we'll issue an Inquiry request with EVPD set to retrieve
the available VPD pages of the device. This would be done in
a way similar of what scsi_generic_read_device_identification
does: create a SCSI command and a reply buffer, fill in the
sg_io_hdr_t structure, call blk_ioctl, check if an error
occurred, process the response.
This same process is done in other 2 functions, get_device_type
and get_stream_blocksize. They differ in the command/reply
buffer and post-processing, everything else is almost a
copy/paste.
Instead of adding a forth copy/pasted-ish code when adding
the passthrough VPD BL emulation, this patch extirpates
this repetition of those 3 functions and put it into
a new one called scsi_SG_IO_FROM_DEV. Any future code that
wants to execute an SG_DXFER_FROM_DEV to the device can
use it, avoiding filling sg_io_hdr_t again and et cetera.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20180627172432.11120-3-danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To add support for the emulation of Block Limits VPD page
for passthrough devices, a few adjustments in the current code
base is required to avoid repetition and improve clarity.
In scsi-generic.c, detach the Inquiry handling from
scsi_read_complete and put it into a new function called
scsi_handle_inquiry_reply. This change aims to avoid
cluttering of scsi_read_complete when we more logic in the
Inquiry response handling is added in the next patches,
centralizing the changes in the new function.
In scsi-disk.c, take the build of all emulated VPD pages
from scsi_disk_emulate_inquiry and make it available to
other files into a non-static function called
scsi_disk_emulate_vpd_page. Making it public will allow
the future VPD BL emulation code for passthrough devices
to use it from scsi-generic.c, avoiding copy/pasting this
code solely for that purpose. It also has the advantage of
providing emulation of all VPD pages in case we need to
emulate other pages in other scenarios. As a bonus,
scsi_disk_emulate_inquiry got tidier.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20180627172432.11120-2-danielhb413@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>