Rename the variable to be more explicit. A further clean-up patch will
move the actual to dependency check to meson entirely.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- builds QAPI builtins types/visitor to fix a linking issue with
unresolved symbols in the static library.
- work around a meson limitation on generated file output directories.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200828110734.1638685-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add genh to the sources to avoid race conditions between QAPI
file generation and libqos compilation.
Make the name_suffix .fa for consistency with other link_whole
static libraries and to work around a Meson issue where
lots of linker flags are placed between -Wl,--start-group and
-Wl,--end-group and this breaks the fork-fuzz.ld linker script.
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Numbering files according to rules causes confusion, because
CUSTOM_COMMAND3.stamp from a previous build might represent
completely different targets after Makefile.ninja is regenerated.
As a result, the new targets are not rebuilt and compilation
fails.
Use the targets to build a SHA1 hash; the chances for collision
are one in 2^24 even with a 12-character prefix of the hash.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On msys2, paths such as -L/e/path/to/qemu are not recognized by
the linker. Fortunately we do not need absolute paths at all in a
non-recursive build system.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson automatically adds "-undefined dynamic_lookup" to
shared_module build targets; b_lundef is only needed for
executables. Therefore, we can remove this option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Whenever a test appears in multiple suites, the rules generated
by mtest2make are currently running it twice. Instead, after
this patch we generate a phony target for each test and we have
a generic "run-tests" target depend on all the tests that were
chosen on the command line. Tests that appear in multiple suites
will be added to the prerequisites just once.
This has other advantages: it removes the handling of -k and
it increases parallelism.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The softfloat tests are quite noisy; before the Meson conversion
they buffered the output in a file and emitted the output only
if the test failed. Tweak mtest2make.py so that the courtesy
is extended to all non-TAP tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the working directory and test command in separate macro arguments,
so that we will be able to insert a test driver in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the environment and test command in separate macro arguments,
so that we will be able to insert a test driver in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation of h_home_node_associativity hard codes
the values of associativity domains of the vcpus. Let's make
it consider the values already initialized in spapr->numa_assoc_array,
via the spapr_numa_get_vcpu_assoc() helper.
We want to set it and forget it, and for that we also need to
assert that we don't overflow the registers of the hypercall.
>From R4 to R9 we can squeeze in 12 associativity domains for
vcpus, so let's assert that VCPU_ASSOC_SIZE -1 isn't greater
than that.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The work to be done in h_home_node_associativity() intersects
with what is already done in spapr_numa_fixup_cpu_dt(). This
patch creates a new helper, spapr_numa_get_vcpu_assoc(), to
be used for both spapr_numa_fixup_cpu_dt() and
h_home_node_associativity().
While we're at it, use memcpy() instead of loop assignment
to created the returned array.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The implementation of this hypercall will be modified to use
spapr->numa_assoc_arrays input. Moving it to spapr_numa.c makes
make more sense.
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NVLink2 GPUs works like a regular NUMA node with its
own associativity values, regardless of user input.
This can be handled inside spapr_numa_associativity_init(),
initializing NVGPU_MAX_NUM associativity arrays that can
be used by the GPUs.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-5-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In a similar fashion as the previous patch, let's move the
handling of ibm,associativity-lookup-arrays from spapr.c to
spapr_numa.c. A spapr_numa_write_assoc_lookup_arrays() helper was
created, and spapr_dt_dynamic_reconfiguration_memory() can now
use it to advertise the lookup-arrays.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Vcpus have an additional paramenter to be appended, vcpu_id. This
also changes the size of the of property itself, which is being
represented in index 0 of numa_assoc_array[cpu->node_id],
and defaults to MAX_DISTANCE_REF_POINTS for all cases but
vcpus.
All this logic makes more sense in spapr_numa.c, where we handle
everything NUMA and associativity. A new helper spapr_numa_fixup_cpu_dt()
was added, and spapr.c uses it the same way as it was using the former
spapr_fixup_cpu_numa_dt().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-3-danielhb413@gmail.com>
[dwg: Correct uint to int type, which can break windows builds]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The next step to centralize all NUMA/associativity handling in
the spapr machine is to create a 'one stop place' for all
things ibm,associativity.
This patch introduces numa_assoc_array, a 2 dimensional array
that will store all ibm,associativity arrays of all NUMA nodes.
This array is initialized in a new spapr_numa_associativity_init()
function, called in spapr_machine_init(). It is being initialized
with the same values used in other ibm,associativity properties
around spapr files (i.e. all zeros, last value is node_id).
The idea is to remove all hardcoded definitions and FDT writes
of ibm,associativity arrays, doing instead a call to the new
helper spapr_numa_write_associativity_dt() helper, that will
be able to write the DT with the correct values.
We'll start small, handling the trivial cases first. The
remaining instances of ibm,associativity will be handled
next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is only used inside spapr_nvdimm.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200901125645.118026-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're going to make changes in how spapr handles all
ibm,associativity* related properties to enhance our current NUMA
support.
At this moment we have associativity code scattered all around
spapr_* files, with hardcoded values and array sizes. This
makes it harder to change any NUMA specific parameters in
the future. Having everything in the same place allows not
only for easier tuning, but also easier understanding since all
NUMA related code is on the same file.
This patch introduces a new file to gather all NUMA/associativity
handling code in spapr, spapr_numa.c. To get things started, let's
remove associativity-reference-points and max-associativity-domains
code from spapr_dt_rtas() to a new helper called spapr_numa_write_rtas_dt().
This will decouple spapr_dt_rtas() from the NUMA changes that
are going to happen in those two properties.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200901125645.118026-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We call pci_register_root_bus() to register 4 IRQs with the
ppc4xx_pci_set_irq() handler. As it can only be called with
values in the [0-4[ range, replace the pointless warning by
an assert().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200901104043.91383-5-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace the magic '4' by ARRAY_SIZE(s->irq) which is more explicit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200901104043.91383-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Note that this changes behavior by setting cs->halted to 1 on reset, which
didn't happen before.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-9-bauerman@linux.ibm.com>
[dwg: Fix from Laurent Vivier for user only case]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Now secondary_cpu_reset() becomes equivalent to main_cpu_reset() so rename
the function to sun4m_cpu_reset().
Also remove setting of cs->halted from cpu_devinit(), which seems out of
place when compared to similar code in other architectures (e.g.,
ppce500_init() in hw/ppc/e500.c).
Finally, change creation of CPU object from cpu_create() to object_new()
and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
not possible to set a property after the object is realized.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-8-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We rely on cpu_common_reset() to set cs->halted to 0, it's redundant to do
it in main_cpu_reset().
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-7-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in main_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Also change creation of CPU object from cpu_create() to object_new() and
qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not
possible to set a property after the object is realized.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-6-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in ppce500_cpu_reset_sec(), use
the start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Also change creation of CPU object from cpu_create() to object_new() and
qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not
possible to set a property after the object is realized.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-5-bauerman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PowerPC sPAPR CPUs start in the halted state, and spapr_reset_vcpu()
attempts to implement this by setting CPUState::halted to 1. But that's too
late for the case of hotplugged CPUs in a machine configure with 2 or more
threads per core.
By then, other parts of QEMU have already caused the vCPU to run in an
unitialized state a couple of times. For example, ppc_cpu_reset() calls
ppc_tlb_invalidate_all(), which ends up calling async_run_on_cpu(). This
kicks the new vCPU while it has CPUState::halted = 0, causing QEMU to issue
a KVM_RUN ioctl on the new vCPU before the guest is able to make the
start-cpu RTAS call to initialize its register state.
This problem doesn't seem to cause visible issues for regular guests, but
on a secure guest running under the Ultravisor it does. The Ultravisor
relies on being able to snoop on the start-cpu RTAS call to map vCPUs to
guests, and this issue causes it to see a stray vCPU that doesn't belong to
any guest.
Fix by setting the start-powered-off CPUState property in
spapr_create_vcpu(), which makes cpu_common_reset() initialize
CPUState::halted to 1 at an earlier moment.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-4-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This change is in a separate patch because it's not so obvious that it
won't cause a regression.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The NVDIMM support for pSeries was introduced in 5.1, but it
didn't contemplate the 'nvdimm' machine option that other
archs uses. For every other arch, if no '-machine nvdimm(=on)'
is present, it is assumed that the NVDIMM support is disabled.
The user must explictly inform that the machine supports
NVDIMM. For pseries-5.1 the 'nvdimm' option is completely
ignored, and support is always assumed to exist. This
leads to situations where the user is able to set 'nvdimm=off'
but the guest boots up with the NVDIMMs anyway.
Fixing this now, after 5.1 launch, can put the overall NVDIMM
support for pseries in a strange place regarding this 'nvdimm'
machine option. If we force everything to be like other archs,
existing pseries-5.1 guests that didn't use 'nvdimm' to use NVDIMM
devices will break. If we attempt to make the newer pseries
machines (5.2+) behave like everyone else, but keep pseries-5.1
untouched, we'll have consistency problems on machine upgrade
(5.1 will have different default values for NVDIMM support than
5.2).
The common ground here is, if the user sets 'nvdimm=off', we
must comply regardless of being 5.1 or 5.2+. This patch
changes spapr_nvdimm_validate() to verify if the user set
NVDIMM support off in the machine options and, in that
case, error out if we have a NVDIMM device. The default
value for 5.2+ pseries machines will still be 'nvdimm=on'
when there is no 'nvdimm' option declared, just like it is today
with pseries-5.1. In the end we'll have different default
semantics from everyone else in the absence of the 'nvdimm'
machine option, but this boat has sailed.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1848887
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-4-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
NVDIMM has different contraints and conditions than the regular
DIMM and we'll need to add at least one more.
Instead of relying on 'if (nvdimm)' conditionals in the body of
spapr_memory_pre_plug(), use the existing spapr_nvdimm_validate_opts()
and put all NVDIMM handling code there. Rename it to
spapr_nvdimm_validate() to reflect that the function is now checking
more than the nvdimm device options. This makes spapr_memory_pre_plug()
a bit easier to follow, and we can tune in NVDIMM parameters
and validation in the same place.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since we're using the string just once, just use g_autofree and
avoid leaking it without calling g_free().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When QEMU switches to the XIVE interrupt mode, it creates all the
guest interrupts at the level of the KVM device. These interrupts are
backed by real HW interrupts from the IPI interrupt pool of the XIVE
controller.
Currently, this is done from the QEMU main thread, which results in
allocating all interrupts from the chip on which QEMU is running. IPIs
are not distributed across the system and the load is not well
balanced across the interrupt controllers.
Change the vCPU IPI allocation to run from the vCPU context. The
associated XIVE IPI interrupt will be allocated on the chip on which
the vCPU is running and improve distribution of the IPIs in the system.
When the vCPUs are pinned, this will make the IPI local to the chip of
the vCPU. It will reduce rerouting between interrupt controllers and
gives better performance.
Device interrupts are still treated the same. To improve placement, we
would need some information on the chip owning the virtual source or
the HW source in case of a passthrough device but this reuires
changes in PAPR.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-5-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The vCPU IPIs are now allocated in kvmppc_xive_cpu_connect() when the
vCPU connects to the KVM device and not when all the sources are reset
in kvmppc_xive_source_reset()
This requires extra care for hotplug vCPUs and VM restore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is doing an extra loop but should be equivalent.
It also differentiate the reset of the sources from the restore of the
sources configuration. This will help in allocating the vCPU IPIs
independently.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We will use to check if a vCPU IPI has been created.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR machine has four different IRQ backends, each implementing
the XICS or XIVE interrupt mode or both in the case of the 'dual'
backend.
If a machine is started in P8 compat mode, QEMU should necessarily
support the XICS interrupt mode and in that case, the XIVE-only IRQ
backend is invalid. Currently, spapr_irq_check() tests the pointer
value to the IRQ backend to check for this condition, instead use the
'xics' flag. It's equivalent and it will ease the introduction of new
XIVE-only IRQ backends if needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820140106.2357228-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We do not implement hotplug in the vscsi bus, but we forgot to
tell qdev about it. The result is that users are able to hotplug
devices in the vscsi bus, the devices appear in qdev, but they
aren't usable by the guest OS unless the user reboots it first.
Setting qbus hotplug_handler to NULL will tell qdev-monitor, via
qbus_is_hotpluggable(), that we do not support hotplug operations
in spapr_vscsi.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1862059
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200820190635.379657-1-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The OPAL test suite runs a read-erase-write test on the PNOR :
https://github.com/open-power/op-test/blob/master/testcases/OpTestPNOR.py
which revealed that the IPMI HIOMAP handlers didn't support
HIOMAP_C_ERASE. Implement the sector erase command by writing 0xFF in
the PNOR memory region.
Cc: Corey Minyard <cminyard@mvista.com>
Reported-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820164638.2515681-1-clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER9, the KVM XIVE device uses priority 7 for the escalation
interrupts. On POWER10, the host can use a reduced set of priorities
and KVM will configure the escalation priority to a lower number. In
any case, the guest is allowed to use priorities in a single range :
[ 0 .. (maxprio - 1) ].
Introduce a 'hv-prio' property to represent the escalation priority
number and use it to compute the "ibm,plat-res-int-priorities"
property defining the priority ranges reserved by the hypervisor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200819130843.2230799-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_drc.h includes typechecker macro boilerplate for the many different
DRC subclasses. However, most of these types don't actually have different
data in their class and/or instance, making these unneeded, unused, and in
fact a bad idea. Remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
It was missing the instance_size field.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200822083920.2668930-1-clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The TypeInfo incorrectly just lets the class size be inherited. It won't
actually break things, since the class is abstract, but we should get it
right.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX1aFfQAKCRD3ErUQojoP
X9kAAP9UgEFiOVCQILI7TSHl2moEjQ7x31CA/Bmod6V+eVKM6QD9Gucjy0KC5DWe
PogywA+CdndMLmH71GN/AFrENVqNnws=
=bbqB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 19f27b6c24 TARGET_ABI_LONG was reduced to 32 bits for
CONFIG_USER_ONLY. There is no need to set this by hand; it will
now be set automatically by include/exec/user/abitypes.h.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bulk of the translator should not have access to the
complete cpu state, to avoid the temptation to examine bits
that are in run time, but not translation time context.
We do need access to the constant cpu configuration, and
that is sufficient, so put that into DisasContext.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>