Use explicit timeouts instead of trying to approximate it by counting
the cumulative duration of nsleep calls.
In practice, the timeout if inb() dwarfed the nsleep delays, and as a
result the real timeout value became a lot larger than 5 seconds.
So: change the semantics from "Not sooner than 5 seconds" to "no more
than 5 seconds" to ensure we don't hang the tester for very long.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448393771-15483-2-git-send-email-jsnow@redhat.com
Otherwise, a window flashes on my desktop (built with SDL). Add this as
other cases have it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448245930-15031-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
One test case closed an event notifier (event_notifier_cleanup())
without first disabling it (set_event_notifier(..., NULL)). This
resulted in a leftover handle 0 that was added to each subsequent
WaitForMultipleObjects() call, causing the function to fail (invalid
handle).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
'make check' failed to compile the test case for mingw because of
undefined references. Pull in a few more dependencies so that it builds.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The device's guest interface and its QEMU user interface are
flawed^Whotly debated. We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.
To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If the device isn't found, the assertion uses dev without
initialization. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-4-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Final tidying: move the interrupt wait into the loop,
document that the status read clears the IRQ, and move
the final interrupt check outside of the loop.
This should be functionally equivalent to how it works
currently, but a little less ambiguous and slightly more
explicit about the state transitions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448060035-31973-3-git-send-email-jsnow@redhat.com
The check for the cleared BSY flag has to be performed
before each data transfer and not just before the
first one.
Commit 5f81724d revealed this glitch as the BSY flag
was not set in ATAPI PIO transfers before.
While at it fix the descriptions and add a comment before
the nested for loop that transfers the data.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1448029742-19771-1-git-send-email-pl@kamp.de
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/IfF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
# gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
qom: Clean up assertions to display values on failure
qom: Replace object property list with GHashTable
qom: Add a test case for complex property finalization
net: Convert net filter code to use object property iterators
ppc: Convert spapr code to use object property iterators
vl: Convert machine help code to use object property iterators
qmp: Convert QMP code to use object property iterators
qom: Introduce ObjectPropertyIterator struct for iteration
qdev: Change Property::offset field to ptrdiff_t type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWTc5PAAoJECgfDbjSjVRpCJEH/jh1CeWCG7zRBXelWK2F5Cgr
ls+V1sCX7NvkfCa3cDZI8imGjYQUr6EiXtqxPArEVMjmUOUzEHPkOx3ICPpfMU7o
RCVNPELav6VBhGDf3mcIVjlDDN9Syhd90xdgaD8dbeSA0UJFHRTdobNlYpYwiRmp
OAASUawEWLGA5cG+W6MBFWiPQWChpNRK3yK3RVduL71TIe4heuHBez4qTB2QKYvF
KM2nRvpkBY21frXJQqWPlCJ6jsdjI/Fl2xR1t4C9qv0TKcB9FESMmH3Jff2bwMQM
8OSnTIRqYaqT6kJkk3Kns8a+porJMnn69OwBRehLmLW/rmx9HQrR2Ey7bYtgd0Y=
=CrrY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 7fe34ca9c2 actually disabled vhost-user-test altogether,
since CONFIG_VHOST_NET is a per-target config variable.
tests/vhost-user-test is already x86/x64 softmmu specific test, in order
to enable it correctly, kvm & vhost-net are also conditions. To check
that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled.
Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication
when both x86 & x64 are enabled.
Other targets than x86 aren't enabled yet, and is intentionally left as
a future improvement, since I can't easily test those.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices have some quite complex object child/link relationships
which place some requirements on the object_property_del_all()
function to consider that properties can be modified while
being iterated over.
This extends the QOM property test case to replicate the
device like structure and expose any potential bugs in the
object_property_del_all() function.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some users of QOM need to be able to iterate over properties
defined against an object instance. Currently they are just
directly using the QTAIL macros against the object properties
data structure.
This is bad because it exposes them to changes in the data
structure used to store properties, as well as changes in
functionality such as ability to register properties against
the class.
This provides an ObjectPropertyIterator struct which will
insulate the callers from the particular data structure
used to store properties. It can be used thus
ObjectProperty *prop;
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
... do something with prop ...
}
object_property_iter_free(iter);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
[AF: Fixed examples, style cleanups]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The test_tls_get_ipaddr() method forgot to free the returned data
from getaddrinfo().
The test_tls_write_cert_chain() method forgot to free the allocated
buffer holding the certificate data after writing it out to a file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
the stop_test case tests that we can resume a block-stream
command after it has stopped/paused due to error. We cannot
always reliably query it before it finishes after resume, though,
so make this a conditional.
The important thing is that we are still testing that it has stopped,
and that it finishes successfully after we send a resume command.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During migration devices continue writing to the guest's memory.
The writes has to be reported to QEMU. This change implements
minimal support in vhost-user-bridge required for successful
migration of a guest with virtio-net device.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commits 6c6f312d and bd797fc1 added new tests (test-blockjob-txn
and test-timed-average, respectively), but did not mark them for
exclusion in .gitignore.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1447386423-13160-1-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost-user-test is broken now: it assumes
QEMU sends RESET_OWNER, and we stopped doing that.
Wait for ENABLE_RING with 0 instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we don't have the qemu-img tool, use the raw format
for tests and skip the high-sector LBA48 tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-4-git-send-email-jsnow@redhat.com
To allow tests to optionally exercise additional tests
that require the qemu-img tool that may not be present
in all builds.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1447439479-16775-3-git-send-email-jsnow@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=9mKZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches (rebased Stefan's pull request)
# gpg: Signature made Thu 12 Nov 2015 15:34:16 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (43 commits)
block: Update copyright of the accounting code
scsi-disk: Account for failed operations
macio: Account for failed operations
ide: Account for failed and invalid operations
atapi: Account for failed and invalid operations
xen_disk: Account for failed and invalid operations
virtio-blk: Account for failed and invalid operations
nvme: Account for failed and invalid operations
iotests: Add test for the block device statistics
block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode
qemu-io: Account for failed, invalid and flush operations
block: New option to define the intervals for collecting I/O statistics
block: Add average I/O queue depth to BlockDeviceTimedStats
block: Compute minimum, maximum and average I/O latencies
block: Allow configuring whether to account failed and invalid ops
block: Add statistics for failed and invalid I/O operations
block: Add idle_time_ns to BlockDeviceStats
util: Infrastructure for computing recent averages
block: define 'clock_type' for the accounting code
ide: Account for write operations correctly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This module computes the average of a set of values within a time
window, keeping also track of the minimum and maximum values.
In order to produce more accurate results it works internally by
creating two time windows of the same period, offsetted by half of
that period. Values are accounted on both windows and the data is
always returned from the oldest one.
[Add missing util/replay.o to test-timed-average dependencies to fix the
build.
--Stefan]
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 201b09c21bbc9c329779d2b2365ee2b9c80dceeb.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BlockJobTxn unit test verifies that both single jobs and pairs of
jobs behave as a transaction group. Either all jobs complete
successfully or the group is cancelled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use a transaction to request an incremental backup across two drives.
Coerce one of the jobs to fail, and then re-run the transaction.
Verify that no bitmap data was lost due to the partial transaction
failure.
To support the 'err-cancel' QMP argument name it's necessary for
transaction_action() to convert underscores in Python argument names
to hyphens for QMP argument names.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446765200-3054-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test simple usage cases for using transactions to create
and synchronize incremental backups.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446765200-3054-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch basically reverts commit d1f8b30e.
It turned out that it breaks stuff, so revert it:
http://lists.nongnu.org/archive/html/qemu-devel/2015-10/msg00949.html
CC: "Michael S. Tsirkin" <mst@redhat.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Unlike the kernel, vhost-user application accesses log table by
mmaping it to its user space. This change adds two new fields to
VhostUserMsg payload: mmap_size, and mmap_offset and make QEMU to
pass the to vhost-user application in VHOST_USER_SET_LOG_BASE
request.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some tests may take long to run, move them under g_test_slow()
condition.
The 5s timeout for the "server" test will have to be adjusted to the worst
known time (for the records, it takes ~0.2s on my host). The "pair"
test takes ~1.7, a quickest version could be implemented.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1447326618-11686-1-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The quorum driver is always built in, but it is disabled during
run-time if there's no SHA256 support available (see commit e94867e).
This patch skips the quorum test in iotest 139 in that case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1447172891-20410-1-git-send-email-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu-io from a bash subshell,
in order to catch segfaults. This method is incompatible with the
current valgrind_qemu_io() bash function.
Move the valgrind usage into the exec subshell in _qemu_io_wrapper(),
while making sure the original return value is passed back to the
caller.
Update test output for tests 039, 061, and 137 as it looks for the
specific subshell command when the process is terminated.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0066fd85d26ca641a1c25135ff2479b7985701cf.1446232490.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash
subshell, in order to catch segfaults. Unfortunately, this means the
process PID cannot be captured via '$!'. We stopped killing qemu and
qemu-nbd processes, leaving a lot of orphaned, running qemu processes
after executing iotests.
Since the process is using exec in the subshell, the PID is the
same as the subshell PID.
Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only
track the qemu PID, however, if requested - not all usage requires
killing the process.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 9e4f958b3895b7259b98d845bb46f000ba362869.1446232490.git.jcody@redhat.com
[mreitz@redhat.com: Replaced '! -z "..."' by '-n "..."']
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test checks that it is not possible to create a snapshot if the
requested overlay node is a BDS which does not support backing images.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch removes the inner quotation marks in all cases like this:
cmd=" ... "${variable}" ... "
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'block-commit' command needs the overlay image of 'top' to
be opened in read-write mode in order to update the backing file
string. If 'top' is not the active layer or its backing file then its
overlay needs to be reopened during the block job.
This is a test case for that scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our testsuite had no coverage of empty arrays, nor of what
happens when the input does not match the expected type.
Useful to have, especially if we start changing the visitor
contracts.
I did not think it worth duplicating these additions to
test-qmp-input-strict; since all strict mode does is add
the ability to reject JSON input that has more keys than
what the visitor expects, yet the additions in this patch
error out earlier than that point regardless of whether
strict mode was requested.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-11-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our generated list visitors have the same problem as has been
mentioned elsewhere (see commit 2f52e20): they allocate data
even on failure. An upcoming patch will correct things to
provide saner guarantees, but first we need to expose the
behavior in the testsuite to ensure we aren't introducing any
memory usage bugs.
There are more test cases throughout the test-qmp-input-* tests
that already deal with partial allocation; a later commit will
clean up all visit_type_FOO(), without marking all of the tests
with FIXME at this time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The testsuite was only covering that we could output the 'int'
branch of an alternate (no additional allocation/cleanup required).
Add a test of the 'str' branch, to make sure that things still
work even when a branch involves allocation.
Update to modern style of g_new0() over g_malloc0() while
touching it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have several tests that perform multiple sub-actions that are
expected to fail. Asserting that an error occurred, then clearing
it up to prepare for the next action, turned into enough
boilerplate that it was sometimes forgotten (for example, a number
of tests added to test-qmp-input-visitor.c in d88f5fd leaked err).
Worse, if an error is not reset to NULL, we risk invalidating
later use of that error (passing a non-NULL err into a function
is generally a bad idea). Encapsulate the boilerplate into a
single helper function error_free_or_abort(), and consistently
use it.
The new function is added into error.c for use everywhere,
although it is anticipated that testsuites will be the main
client.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By using &error_abort, we can avoid a local err variable in
situations where we expect success. It also has the nice
effect that if the test breaks, the error message from
error_abort tends to be nicer than that of g_assert().
This patch has an additional bonus of fixing several call sites that
were passing &err to two different functions without checking it in
between. In general that is unsafe practice; because if the first
function sets an error, the second function could abort() if it tries to
set a different error. We got away with it because we were asserting
that err was NULL through the entire chain, but switching to
&error_abort avoids the questionable practice up front.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make valgrind happy with the current state of the tests, so that
it is easier to see if future patches introduce new memory problems
without being drowned in noise. Many of the leaks were due to
calling a second init without tearing down the data from an earlier
visit. But since teardown is already idempotent, and we already
register teardown as part of input_visitor_test_add(), it is nicer
to just make init() safe to call multiple times than it is to have
to make all tests call teardown.
Another common leak was forgetting to clean up an error object,
after testing that an error was raised.
Another leak was in test_visitor_in_struct_nested(), failing to
clean the base member of UserDefTwo. Cleaning that up left
check_and_free_str() as dead code (since using the qapi_free_*
takes care of recursion, and we don't want double frees).
A final leak was in test_visitor_out_any(), which was reassigning
the qobj local variable to a subset of the overall structure
needing freeing; it did not result in a use-after-free, but
was not cleaning up all the qdict.
test-qmp-event and test-qmp-commands were already clean.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than duplicate the body of two functions just to
decide between qobject_from_jsonv() and qobject_from_json(),
exploit the fact that qobject_from_jsonv() intentionally
takes 'va_list *' instead of the more common 'va_list', and
that qobject_from_json() just calls qobject_from_jsonv(,NULL).
For each file, our two existing init functions then become
thin wrappers around a new internal function, and future
updates to initialization don't have to be duplicated.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-5-git-send-email-eblake@redhat.com>
[Two old comment typos fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
