The migration sequence of a guest using the XIVE exploitation mode
relies on the fact that the states of all devices are restored before
the machine is. This is not true for hot-plug devices such as CPUs
which state come after the machine. This breaks migration because the
thread interrupt context registers are not correctly set.
Fix migration of hotplugged CPUs by restoring their context in the
'post_load' handler of the XiveTCTX model.
Fixes: 277dd3d771 ("spapr/xive: add migration support for KVM")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190813064853.29310-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a nasty regression in qemu-4.1 for the 'pseries' machine,
caused by the new "dual" interrupt controller model. Specifically,
qemu can crash when used with KVM if a 'system_reset' is requested
while there's active I/O in the guest.
The problem is that in spapr_machine_reset() we:
1. Reset the CAS vector state
spapr_ovec_cleanup(spapr->ov5_cas);
2. Reset all devices
qemu_devices_reset()
3. Reset the irq subsystem
spapr_irq_reset();
However (1) implicitly changes the interrupt delivery mode, because
whether we're using XICS or XIVE depends on the CAS state. We don't
properly initialize the new irq mode until (3) though - in particular
setting up the KVM devices.
During (2), we can temporarily drop the BQL allowing some irqs to be
delivered which will go to an irq system that's not properly set up.
Specifically, if the previous guest was in (KVM) XIVE mode, the CAS
reset will put us back in XICS mode. kvm_kernel_irqchip() still
returns true, because XIVE was using KVM, however XICs doesn't have
its KVM components intialized and kernel_xics_fd == -1. When the irq
is delivered it goes via ics_kvm_set_irq() which assert()s that
kernel_xics_fd != -1.
This change addresses the problem by delaying the CAS reset until
after the devices reset. The device reset should quiesce all the
devices so we won't get irqs delivered while we mess around with the
IRQ. The CAS reset and irq re-initialize should also now be under the
same BQL critical section so nothing else should be able to interrupt
it either.
We also move the spapr_irq_msi_reset() used in one of the legacy irq
modes, since it logically makes sense at the same point as the
spapr_irq_reset() (it's essentially an equivalent operation for older
machine types). Since we don't need to switch between different
interrupt controllers for those old machine types it shouldn't
actually be broken in those cases though.
Cc: Cédric Le Goater <clg@kaod.org>
Fixes: b2e22477 "spapr: add a 'reset' method to the sPAPR IRQ backend"
Fixes: 13db0cd9 "spapr: introduce a new sPAPR IRQ backend supporting
XIVE and XICS"
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set QEMU_PCI_CAP_EXPRESS unconditionally in init(), then clear it in
realize() in case the device is not connected to a PCIe bus.
This makes sure the pci config space allocation is big enough, so
accessing the PCIe extended config space doesn't overflow the pci
config space buffer.
PCI(e) config space is guest writable. Writes are limited by
write mask (which probably is also filled with random stuff),
so the guest can only flip enabled bits. But I suspect it
still might be exploitable, so rather serious because it might
be a host escape for the guest. On the other hand the device
is probably not yet in widespread use.
(For a QEMU version without this commit, a mitigation for the
bug is available: use "-device bochs-display" as a conventional pci
device only.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190812065221.20907-2-kraxel@redhat.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'edid' is a property of the virtio-gpu base device, so turning
it off on virtio-gpu-pci is not enough (it misses -ccw). Turn
it off on the base device instead.
Fixes: 0a71966253 ("edid: flip the default to enabled")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190806115819.16026-1-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACS got added in 4.0 unconditionally, that broke older<->4.0 migration
where there was a PCIe root port.
Fix this by turning it off for 3.1 and older machines; note this
fixes compatibility for older QEMUs but breaks compatibility with 4.0
for older machine types.
machine type source qemu dest qemu
3.1 3.1 4.0 broken
3.1 3.1 4.1rc2 broken
3.1 3.1 4.1+this OK ++
3.1 4.0 4.1rc2 OK
3.1 4.0 4.1+this broken --
4.0 4.0 4.1rc2 OK
4.0 4.0 4.1+this OK
So we gain and lose; the consensus seems to be treat this as a
fix for older machine types.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190730093719.12958-3-dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACS was added in 4.0 unconditionally, this breaks migration
compatibility.
Allow ACS to be disabled by adding a property that's
checked by pcie_root_port.
Unfortunately pcie-root-port doesn't have any instance data,
so there's no where for that flag to live, so stuff it into
PCIESlot.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190730093719.12958-2-dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to insert a read-only medium (i.e. a read-only block node) to
the BlockBackend of a floppy drive, we must not have taken write
permissions on that BlockBackend, or the operation will fail with the
error message "Block node is read-only".
The device already takes care to remove all permissions when the medium
is ejected, but the state isn't correct if the drive is initially empty:
It uses blk_is_read_only() to check whether write permissions should be
taken, but this function returns false for empty BlockBackends in the
common case.
Fix floppy_drive_realize() to avoid taking write permissions if the
drive is empty.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
scsi-disks decides whether it has a read-only device by looking at
whether the BlockBackend specified as drive=... is read-only. In the
case of an anonymous BlockBackend (with a node name specified in
drive=...), this is the read-only flag of the attached node. In the case
of an empty anonymous BlockBackend, it's always read-write because
nothing prevented it from being read-write.
This is a problem because scsi-cd would take write permissions on the
anonymous BlockBackend of an empty drive created without a drive=...
option. Using blockdev-insert-medium with a read-only node fails then
with the error message "Block node is read-only".
Fix scsi_realize() so that scsi-cd devices always take read-only
permissions on their BlockBackend instead.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1733920
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
QEMU will crash with:
Segmentation fault (core dumped)
when negative slot number is used, ex:
qemu-system-x86_64 -m 1G,maxmem=20G,slots=256 \
-object memory-backend-ram,id=mem1,size=1G \
-device pc-dimm,id=dimm1,memdev=mem1,slot=-2
fix it by checking that slot number is within valid range.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190723160859.27250-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Igor Mammedov <<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>><br></blockquote><div><br></div><div>Reviewed-by: Li Qiang <<a href="mailto:liq3ea@gmail.com">liq3ea@gmail.com</a>><br></div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJdPq64AAoJEO8Ells5jWIR790H/RVKgnVALMyXYQ7l1ftVRvzA
IJ6o8LHS2MlSbcyh182/tRl2LHGDEnnu3YfktocwnuRVQauS5QOebLwUB8oA41Uf
LeLeVmxQtQE/7b1czQjxCl9jCnaY3tmkAAhkEOT/cXBrM6JlujgEWS8cKi3jqbMS
grGpeOKCjZX4F3HI47J2Tgij1KKTOz/Roj+mqzC1+o9twN9k32W0DRovTnGWUu09
6vzSS8UkfdyTfQk+OCVaxloXP3CMqKMeWNsWTRSk+yKbk7kKBoW3goF5N3AAjEl6
5JYcAqP8suhaYQalk+6Q3XFPy7wMPOZAmRKyK49eGyXimim8zJals/fZiSDyC0w=
=cM2i
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 29 Jul 2019 09:30:48 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/colo-compare.c: Fix memory leak and code style issue.
net: tap: replace snprintf with g_strdup_printf calls
qemu-bridge-helper: move repeating code in parse_acl_file
qemu-bridge-helper: restrict interface name to IFNAMSIZ
e1000: don't raise interrupt in pre_save()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Here's a pull request for qemu-4.1, which I hope will be the last from
the ppc tree. This applies a couple of last minute fixes for the XIVE
code.
-----BEGIN PGP SIGNATURE-----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=YqKA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190728' into staging
ppc patch queue (for 4.1) 2019-07-28
Here's a pull request for qemu-4.1, which I hope will be the last from
the ppc tree. This applies a couple of last minute fixes for the XIVE
code.
# gpg: Signature made Sun 28 Jul 2019 07:42:11 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190728:
xics/kvm: Fix fallback to emulated XICS
spapr/irq: Inform the user when falling back to emulated IC
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This contains a single patch that fixes the warning introduced as part
of the OpenSBI integration.
-----BEGIN PGP SIGNATURE-----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=j5RK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-rc3' into staging
RISC-V Patch for 4.1-rc3
This contains a single patch that fixes the warning introduced as part
of the OpenSBI integration.
# gpg: Signature made Sat 27 Jul 2019 00:04:19 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.1-rc3:
riscv/boot: Fixup the RISC-V firmware warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should not raise any interrupt after VM has been stopped but this
is what e1000 currently did when mit timer is active in
pre_save(). Fixing this by scheduling a timer in post_load() which can
make sure the interrupt was raised when VM is running.
Reported-and-tested-by: Longpeng <longpeng2@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Just to give an indication to the user that the error condition is
handled and how.
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156398743479.546975.14566809803480887488.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix a typo in the warning message displayed to users, don't print the
message when running inside qtest and don't mention a specific QEMU
version for the deprecation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In commit e6b2b20d97 we made the boot loader code try to avoid
putting the initrd on top of the kernel. However the expression used
to calculate the start of the initrd:
info->initrd_start = info->loader_start +
MAX(MIN(info->ram_size / 2, 128 * 1024 * 1024), kernel_size);
incorrectly uses 'kernel_size' as the offset within RAM of the
highest address to avoid. This is incorrect because the kernel
doesn't start at address 0, but slightly higher than that. This
means that we can still incorrectly end up overlaying the initrd on
the kernel in some cases, for example:
* The kernel's image_size is 0x0a7a8000
* The kernel was loaded at 0x40080000
* The end of the kernel is 0x4A828000
* The DTB was loaded at 0x4a800000
To get this right we need to track the actual highest address used
by the kernel and use that rather than kernel_size. We already
set image_low_addr and image_high_addr for ELF images; set them
also for the various other image types we support, and then use
image_high_addr as the lowest allowed address for the initrd.
(We don't use image_low_addr, but we set it for consistency
with the existing code path for ELF files.)
Fixes: e6b2b20d97
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190722151804.25467-3-peter.maydell@linaro.org
Rename the elf_low_addr and elf_high_addr variables to image_low_addr
and image_high_addr -- in the next commit we will extend them to
be set for other kinds of image file and not just ELF files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Message-id: 20190722151804.25467-2-peter.maydell@linaro.org
gamepad_state::buttons is a pointer to an array of structs,
not an array of structs, so should be declared in the vmstate
with VMSTATE_STRUCT_VARRAY_POINTER_INT32; otherwise we
corrupt memory on incoming migration.
We bump the vmstate version field as the easiest way to
deal with the migration break, since migration wouldn't have
worked reliably before anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20190725163710.11703-2-peter.maydell@linaro.org
Fix the pl330 main and queue vmstate description.
There were missing POINTER flags causing crashes during
incoming migration because:
+ PL330State chan field is a pointer to an array
+ PL330Queue queue field is a pointer to an array
Also bump corresponding vmsd version numbers.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20190724143553.21557-1-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdOciFAAoJECgfDbjSjVRp/FwH/jNag2BkBfyvTNibuZi0V4uH
1nXmZQI9gQye6eDmkg0T0fl+8zpMNO7OIGRjhOemMOpfJ1yAYrkFI4OrbTV40lOe
UvH/6s8m5DlWPXrVvkv52esLPrV9cV4kULpS0yDfngfJ7CuQTMc/er9ZBav38iSG
kDH92LTWqIoZq08JUkdOxqjl5me8vnvQHieo/SgFNhuJon+RkGZvcN7j4zj/l1cg
ozeXoyBve27TnirGfgjY7/z3kTDTAKW8wWFj/gV2TllmPx4ReH6a6IYwPWrZaOXA
m4ZhTK0D8C2UPtbseHrfriYHkuL4eBK95OJvXc3vC/w14ZmP4tuaipOL7If9oRk=
=oU7D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc: fixes, cleanups
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 25 Jul 2019 16:19:33 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-balloon: free pbp more aggressively
virtio-balloon: don't track subpages for the PBP
virtio-balloon: Use temporary PBP only
virtio-balloon: Rework pbp tracking data
virtio-balloon: Better names for offset variables in inflate/deflate code
virtio-balloon: Simplify deflate with pbp
virtio-balloon: Fix QEMU crashes on pagesize > BALLOON_PAGE_SIZE
virtio-balloon: Fix wrong sign extension of PFNs
i386/acpi: show PCI Express bus on pxb-pcie expanders
ioapic: kvm: Skip route updates for masked pins
i386/acpi: fix gint overflow in crs_range_compare
docs: clarify multiqueue vs multiple virtqueues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement a function to translate TPM error codes to strings so that
at least the most common error codes can be translated to human
readable strings.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Previous patches switched to a temporary pbp but that does not go far
enough: after device uses a buffer, guest is free to reuse it, so
tracking the page and freeing it later is wrong.
Free and reset the pbp after we push each element.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Cc: qemu-stable@nongnu.org #v4.0.0
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Exit() in the frontend reset function when the backend indicates
intialization failure.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
As ramblocks cannot get removed/readded while we are processing a bulk
of inflation requests, there is no more need to track the page size
in form of the number of subpages.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190725113638.4702-8-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We still have multiple issues in the current code
- The PBP is not freed during unrealize()
- The PBP is not reset on device resets: After a reset, the PBP is stale.
- We are not indicating VIRTIO_BALLOON_F_MUST_TELL_HOST, therefore
guests (esp. legacy guests) will reuse pages without deflating,
turning the PBP stale. Adding that would require compat handling.
Instead, let's use the PBP only temporarily, when processing one bulk of
inflation requests. This will keep guest_page_size > 4k working (with
Linux guests). There is nothing to do for deflation requests anymore.
The pbp is only used for a limited amount of time.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Cc: qemu-stable@nongnu.org #v4.0.0
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Using the address of a RAMBlock to test for a matching pbp is not really
safe. Instead, let's use the guest physical address of the base page
along with the page size (via the number of subpages).
Also, let's allocate the bitmap separately. This makes the code
easier to read and maintain - we can reuse bitmap_new().
Prepare the code to move the PBP out of the device.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Fixes: b27b323914 ("virtio-balloon: Fix possible guest memory corruption with inflates & deflates")
Cc: qemu-stable@nongnu.org #v4.0.0
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-6-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"host_page_base" is really confusing, let's make this clearer, also
rename the other offsets to indicate to which base they apply.
offset -> mr_offset
ram_offset -> rb_offset
host_page_base -> rb_aligned_offset
While at it, use QEMU_ALIGN_DOWN() instead of a handcrafted computation
and move the computation to the place where it is needed.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-5-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's simplify this - the case we are optimizing for is very hard to
trigger and not worth the effort. If we're switching from inflation to
deflation, let's reset the pbp.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are using the wrong functions to set/clear bits, effectively touching
multiple bits, writing out of range of the bitmap, resulting in memory
corruptions. We have to use set_bit()/clear_bit() instead.
Can easily be reproduced by starting a qemu guest on hugetlbfs memory,
inflating the balloon. QEMU crashes. This never could have worked
properly - especially, also pages would have been discarded when the
first sub-page would be inflated (the whole bitmap would be set).
While testing I realized, that on hugetlbfs it is pretty much impossible
to discard a page - the guest just frees the 4k sub-pages in random order
most of the time. I was only able to discard a hugepage a handful of
times - so I hope that now works correctly.
Fixes: ed48c59875 ("virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size")
Fixes: b27b323914 ("virtio-balloon: Fix possible guest memory corruption with inflates & deflates")
Cc: qemu-stable@nongnu.org #v4.0.0
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we directly cast from int to uint64_t, we will first sign-extend to
an int64_t, which is wrong. We actually want to treat the PFNs like
unsigned values.
As far as I can see, this dates back to the initial virtio-balloon
commit, but wasn't triggered as fairly big guests would be required.
Cc: qemu-stable@nongnu.org
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190722134108.22151-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Show PCIe host bridge PNP id with PCI host bridge as a compatible id
when expanding a pcie bus.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1563526469-15588-1-git-send-email-wrfsh@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Masked entries will not generate interrupt messages, thus do no need to
be routed by KVM. This is a cosmetic cleanup, just avoiding warnings of
the kind
qemu-system-x86_64: vtd_irte_get: detected non-present IRTE (index=0, high=0xff00, low=0x100)
if the masked entry happens to reference a non-present IRTE.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <a84b7e03-f9a8-b577-be27-4d93d1caa1c9@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
When very large regions (32GB sized in our case, PCI pass-through of GPUs)
are compared substraction result does not fit into gint.
As a result crs_replace_with_free_ranges does not get sorted ranges and
incorrectly computes PCI64 free space regions. Which then makes linux
guest complain about device and PCI64 hole intersection and device
becomes unusable.
Fix that by returning exactly fitting ranges.
Also fix indentation of an entire crs_replace_with_free_ranges to make
checkpatch happy.
Cc: qemu-stable@nongnu.org
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1563466463-26012-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
commit a6f230c move blockbackend back to main AioContext on unplug. It set the AioContext of
SCSIDevice to the main AioContex, but s->ctx is still the iothread AioContex（if the scsi controller
is configure with iothread）. So if there are having in-flight requests during unplug, a failing assertion
happend. The bt is below:
(gdb) bt
#0 0x0000ffff86aacbd0 in raise () from /lib64/libc.so.6
#1 0x0000ffff86aadf7c in abort () from /lib64/libc.so.6
#2 0x0000ffff86aa6124 in __assert_fail_base () from /lib64/libc.so.6
#3 0x0000ffff86aa61a4 in __assert_fail () from /lib64/libc.so.6
#4 0x0000000000529118 in virtio_scsi_ctx_check (d=<optimized out>, s=<optimized out>, s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:246
#5 0x0000000000529ec4 in virtio_scsi_handle_cmd_req_prepare (s=0x2779ec00, req=0xffff740397d0) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:559
#6 0x000000000052a228 in virtio_scsi_handle_cmd_vq (s=0x2779ec00, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:603
#7 0x000000000052afa8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>, vq=0xffff7c6d7110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:59
#8 0x000000000054d94c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>) at /home/qemu-4.0.0/hw/virtio/virtio.c:2452
assert(blk_get_aio_context(d->conf.blk) == s->ctx) failed.
To avoid assertion failed, moving the "if" after qdev_simple_device_unplug_cb.
In addition, to avoid another qemu crash below, add aio_disable_external before
qdev_simple_device_unplug_cb, which disable the further processing of external clients
when doing qdev_simple_device_unplug_cb.
(gdb) bt
#0 scsi_req_unref (req=0xffff6802c6f0) at hw/scsi/scsi-bus.c:1283
#1 0x00000000005294a4 in virtio_scsi_handle_cmd_req_submit (req=<optimized out>,
s=<optimized out>) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:589
#2 0x000000000052a2a8 in virtio_scsi_handle_cmd_vq (s=s@entry=0x9c90e90,
vq=vq@entry=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi.c:625
#3 0x000000000052afd8 in virtio_scsi_data_plane_handle_cmd (vdev=<optimized out>,
vq=0xffff7c05f110) at /home/qemu-4.0.0/hw/scsi/virtio-scsi-dataplane.c:60
#4 0x000000000054d97c in virtio_queue_host_notifier_aio_poll (opaque=<optimized out>)
at /home/qemu-4.0.0/hw/virtio/virtio.c:2447
#5 0x00000000009b204c in run_poll_handlers_once (ctx=ctx@entry=0x6efea40,
timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:521
#6 0x00000000009b2b64 in run_poll_handlers (ctx=ctx@entry=0x6efea40,
max_ns=max_ns@entry=4000, timeout=timeout@entry=0xffff7d7f7308) at util/aio-posix.c:559
#7 0x00000000009b2ca0 in try_poll_mode (ctx=ctx@entry=0x6efea40, timeout=0xffff7d7f7308,
timeout@entry=0xffff7d7f7348) at util/aio-posix.c:594
#8 0x00000000009b31b8 in aio_poll (ctx=0x6efea40, blocking=blocking@entry=true)
at util/aio-posix.c:636
#9 0x00000000006973cc in iothread_run (opaque=0x6ebd800) at iothread.c:75
#10 0x00000000009b592c in qemu_thread_start (args=0x6efef60) at util/qemu-thread-posix.c:502
#11 0x0000ffff8057f8bc in start_thread () from /lib64/libpthread.so.0
#12 0x0000ffff804e5f8c in thread_start () from /lib64/libc.so.6
(gdb) p bus
$1 = (SCSIBus *) 0x0
Signed-off-by: Zhengui li <lizhengui@huawei.com>
Message-Id: <1563696502-7972-1-git-send-email-lizhengui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1563829520-17525-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 97fd1ea8c1 broke the build for --without-default-devices as
VMMOUSE depends on VMPORT.
Fixes: 97fd1ea8c1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
GCC9 is confused by this comment when building with CFLAG
-Wimplicit-fallthrough=2:
hw/block/pflash_cfi02.c: In function ‘pflash_write’:
hw/block/pflash_cfi02.c:574:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
574 | if (boff == 0x55 && cmd == 0x98) {
| ^
hw/block/pflash_cfi02.c:581:9: note: here
581 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Rewrite the comment using 'fall through' which is recognized by
GCC and static analyzers.
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190719131425.10835-4-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
To avoid incoherent states when the machine resets (see bug report
below), add the device reset callback.
A "system reset" sets the device state machine in READ_ARRAY mode
and, after some delay, set the SR.7 READY bit.
Since we do not model timings, we set the SR.7 bit directly.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1678713
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[Laszlo Ersek: Regression tested EDK2 OVMF IA32X64, ArmVirtQemu Aarch64
https://lists.gnu.org/archive/html/qemu-devel/2019-07/msg04373.html]
Message-Id: <20190718104837.13905-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The i.MX6UL always has a single Cortex-A7 CPU (we set FSL_IMX6UL_NUM_CPUS
to 1 in line with this). This means that all the code in fsl-imx6ul.c to
handle multiple CPUs is dead code, and Coverity is now complaining that
it is unreachable (CID 1403008, 1403011).
Remove the unreachable code and the only-executes-once loops,
and replace the single-entry cpu[] array in the FSLIMX6ULState
with a simple cpu member.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190712115030.26895-1-peter.maydell@linaro.org
When READ CAPACITY command completes, scsi_read_complete() function
snoops the command result and updates SCSIDevice members blocksize and
max_lba . However, this update is executed even when READ CAPACITY
command indicates an error in sense data. This causes unexpected
blocksize update with zero value for SCSI devices without
READ CAPACITY(10) command support and eventually results in a divide
by zero. An emulated device by TCMU-runner is an example of a device
that doesn't support READ CAPACITY(10) command.
To avoid the unexpected update, add sense key check in
scsi_read_complete() function. The function already checks the sense key
for VPD Block Limits emulation. Do the scsi_parse_sense_buf() call for
all requests rather than just for VPD Block Limits emulation, so that
blocksize and max_lba are only updated if READ CAPACITY returns zero
sense key.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
[Extend the check to all requests, not just READ CAPACITY]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids memory leak when device hotplug is failed.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190717004606.12444-2-xieyongji@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids memory leak when device hotplug is failed.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190717004606.12444-1-xieyongji@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The argument is not used and passing it clutters error propagation in the
callers. So, get rid of it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
