This commit fixes a bug which causes the guest to hang. The bug was
observed upon a "receive overrun" (bit #6 of the ICR register)
interrupt which could be triggered post migration in a heavy traffic
environment. Even though the "receive overrun" bit (#6) is masked out
by the IMS register (refer to the log below) the driver still receives
an interrupt as the "receive overrun" bit (#6) causes the "Other" -
bit #24 of the ICR register - bit to be set as documented below. The
driver handles the interrupt and clears the "Other" bit (#24) but
doesn't clear the "receive overrun" bit (#6) which leads to an
infinite loop. Apparently the Windows driver expects that the "receive
overrun" bit and other ones - documented below - to be cleared when
the "Other" bit (#24) is cleared.
So to sum that up:
1. Bit #6 of the ICR register is set by heavy traffic
2. As a results of setting bit #6, bit #24 is set
3. The driver receives an interrupt for bit 24 (it doesn't receieve an
interrupt for bit #6 as it is masked out by IMS)
4. The driver handles and clears the interrupt of bit #24
5. Bit #6 is still set.
6. 2 happens all over again
The Interrupt Cause Read - ICR register:
The ICR has the "Other" bit - bit #24 - that is set when one or more
of the following ICR register's bits are set:
LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit
#17, MNG - bit #18
This bug can occur with any of these bits depending on the driver's
behaviour and the way it configures the device. However, trying to
reproduce it with any bit other than RX0 is challenging and came to
failure as the drivers don't implement most of these bits, trying to
reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed
too as it seems that Windows handles this bit differently.
Log sample of the storm:
27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004)
27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004)
* This bug behaviour wasn't observed with the Linux driver.
This commit solves:
https://bugzilla.redhat.com/show_bug.cgi?id=1447935https://bugzilla.redhat.com/show_bug.cgi?id=1449490
Cc: qemu-stable@nongnu.org
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The tx_bh or tx_timer will free in virtio_net_del_queue() function, when
removing virtio-net queues if the guest doesn't support multiqueue. But
it might be still referenced by virtio_net_set_status(), which needs to
be set NULL. And also the tx_waiting needs to be set zero to prevent
virtio_net_set_status() accessing tx_bh or tx_timer.
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZHMOuAAoJECgfDbjSjVRp/5IH/3kOa7yV3KUi4QVbQV7WwBH3
LK+/jwIz4UhOZn+bS4qi+gjN6aFhNoBNDFmYsRTWKKdLMvZvkRBMDcv8DMIKeAyl
kG/ispv8VI+GY/CRKnqzPm0FSulv8WPRryxkdGzK4oHiMv+4FpFR0v/n9NRHjwTA
XNJ4k33IqBldXyZwwAzP5dT019EMvbn4bNrkLzlcF2w8mTWPf43eX/kIkRX0cAys
5IVTQVGEOwpnyV0jxJDP+aoVMrqv8xl88LLuRpTgWUo0UnxXL5/GZQOCCUN6DQ7M
BOLmyyP9mT9k8iUI+fQsDxAtY7cL9torq+p985nQdH0nxmI3GCoufn9aJG0J9yc=
=d34x
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes that missed the release.
Most notably we are reverting shpc back to enabled by default state
as guests uses that as an indicator that hotplug is supported
(even though it's unused). Unfortunately we can't fix this
on the stable branch since that would break migration.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 May 2017 10:42:06 PM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
exec: abstract address_space_do_translate()
pci: deassert intx when pci device unrealize
virtio: allow broken device to notify guest
Revert "hw/pci: disable pci-bridge's shpc by default"
acpi-defs: clean up open brace usage
ACPI: don't call acpi_pcihp_device_plug_cb on xen
iommu: Don't crash if machine is not PC_MACHINE
pc: add 2.10 machine type
pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot
libvhost-user: fix crash when rings aren't ready
hw/virtio: fix vhost user fails to startup when MQ
hw/arm/virt: generate 64-bit addressable ACPI objects
hw/acpi-defs: replace leading X with x_ in FADT field names
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a pci device is not reset by VM (by writing into config space)
and unplugged by VM, after that when VM reboots, qemu may assert:
pcibus_reset: Assertion `bus->irq_count[i] == 0' failed
Cc: qemu-stable@nongnu.org
Signed-off-by: herongguang <herongguang.he@huawei.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to section 2.1.2 of the virtio-1 specification:
"The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that
a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET,
the device MUST send a device configuration change notification to the
driver."
Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken"
introduced a virtio_error() call that just does that:
- internally mark the device as broken
- set the DEVICE_NEEDS_RESET bit in the status
- send a configuration change notification
Unfortunately, virtio_notify_vector(), called by virtio_notify_config(),
returns right away when the device is marked as broken and the notification
isn't sent in this case.
The spec doesn't say whether a broken device can send notifications
in other situations or not. But since the driver isn't supposed to do
anything but to reset the device, it makes sense to keep the check in
virtio_notify_config().
Marking the device as broken AFTER the configuration change notification was
sent is enough to fix the issue.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit dc0ae76770.
Disabling the shpc controller has an undesired side effect.
The PCI bridge remains with no attached devices at boot time,
and the guest operating systems do not allocate any resources
for it, leaving the bridge unusable. Note that the behaviour
is dictated by the pci bridge specification.
Revert the commit and leave the shpc controller even if is not
actually used by any architecture. Slot 0 remains unusable at boot time.
Keep shpc off for QEMU 2.9 machines.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_S390_PCI_HOST_BRIDGE is a subclass of TYPE_PCI_HOST_BRIDGE,
which is a subclass of TYPE_SYS_BUS_DEVICE. TYPE_SYS_BUS_DEVICE
already sets user_creatable=false, so we don't require an
explicit user_creatable=false assignment in
s390_pcihost_class_init().
Cc: Alexander Graf <agraf@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Pierre Morel <pmorel@linux.vnet.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-22-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
TYPE_XENSYSDEV is only used internally by xen_be_init(), and is
not supposed to be plugged/unplugged dynamically. Remove the
user_creatable flag from the device class.
Cc: Juergen Gross <jgross@suse.com>,
Cc: Peter Maydell <peter.maydell@linaro.org>,
Cc: Thomas Huth <thuth@redhat.com>
Cc: sstabellini@kernel.org
Cc: Markus Armbruster <armbru@redhat.com>,
Cc: Marcel Apfelbaum <marcel@redhat.com>,
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-21-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
virtio-mmio needs to be wired and mapped by other device or board
code, and won't work with -device. Remove the user_creatable flag
from the device class.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
sysbus-ohci needs to be mapped and wired by device or board code,
and won't work with -device. Remove the user_creatable flag from
the device class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-19-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hpet needs to be mapped and wired by the board code and won't
work with -device. Remove the user_creatable flag from the device
class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-18-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generic-sdhci needs to be wired by other devices' code, so it
can't be used with -device. Remove the user_creatable flag from
the device class.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-17-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
esp devices aren't going to work with -device, as they need IRQs
to be connected and mmio to be mapped (this is done by
esp_init()). Remove the user_creatable flag from the device
class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
fw_cfg won't work with -device, as:
* fw_cfg_init1() won't get called for the device;
* The device won't appear at /machine/fw_cfg, and won't work with
the -fw_cfg command-line option.
Remove the user_creatable flag from the device class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-15-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
unimplemented-device needs to be created and mapped using
create_unimplemented_device() (or equivalent code), and won't
work with -device. Remove the user_creatable flag from the device
class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
isabus-bridge needs to be created by isa_bus_new(), and won't
work with -device, as it won't create the TYPE_ISA_BUS bus
itself. Remove the user_creatable flag from the device class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-13-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
allwinner-ahci needs its IRQ to be connected and mmio to be
mapped (this is done by the alwinner-a10 device realize method),
and won't work with -device. Remove the user_creatable flag from
the device class.
Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-12-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The sysbus-ahci devices are supposed to be created and wired by
code from other devices, like calxeda_init() and
xlnx_zynqmp_realize(), and won't work with -device. Remove the
user_creatable flag from the device class.
Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The kvmvapic device is only usable when created by
apic_common_realize(), not using -device. Remove the
user_creatable flag from the device class.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
An ioapic device is already created by the q35 initialization
code, and using "-device ioapic" or "-device kvm-ioapic" will
always fail with "Only 1 ioapics allowed". Remove the
user_creatable flag from the ioapic device classes.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
kvmclock should be used by guests only when the appropriate CPUID
feature flags are set on the VCPU, and it is automatically
created by kvmclock_create() when those feature flags are set.
This means creating a kvmclock device using -device is useless.
Remove user_creatable from its device class.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
TYPE_CFI_PFLASH01 devices need to be mapped by
pflash_cfi01_register() (or equivalent) and can't be used with
-device. Remove user_creatable from the device class.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-7-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
sysbus-fdc and SUNW,fdtwo devices need IRQs to be wired and mmio
to be mapped, and can't be used with -device. Unset
user_creatable on their device classes.
Cc: John Snow <jsnow@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
amd-iommu and intel-iommu are really meant to be used with
-device, so they need user_creatable=true. Remove the FIXME
comment.
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
xen-backend can be plugged/unplugged dynamically when using the
Xen accelerator, so keep the user_creatable flag on the device
class and remove the FIXME comment.
Cc: Juergen Gross <jgross@suse.com>,
Cc: Peter Maydell <peter.maydell@linaro.org>,
Cc: Thomas Huth <thuth@redhat.com>
Cc: sstabellini@kernel.org
Cc: Markus Armbruster <armbru@redhat.com>,
Cc: Marcel Apfelbaum <marcel@redhat.com>,
Cc: Laszlo Ersek <lersek@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
commit 33cd52b5d7 unset
cannot_instantiate_with_device_add_yet in TYPE_SYSBUS, making all
sysbus devices appear on "-device help" and lack the "no-user"
flag in "info qdm".
To fix this, we can set user_creatable=false by default on
TYPE_SYS_BUS_DEVICE, but this requires setting
user_creatable=true explicitly on the sysbus devices that
actually work with -device.
Fortunately today we have just a few has_dynamic_sysbus=1
machines: virt, pc-q35-*, ppce500, and spapr.
virt, ppce500, and spapr have extra checks to ensure just a few
device types can be instantiated:
* virt supports only TYPE_VFIO_CALXEDA_XGMAC, TYPE_VFIO_AMD_XGBE.
* ppce500 supports only TYPE_ETSEC_COMMON.
* spapr supports only TYPE_SPAPR_PCI_HOST_BRIDGE.
This patch sets user_creatable=true explicitly on those 4 device
classes.
Now, the more complex cases:
pc-q35-*: q35 has no sysbus device whitelist yet (which is a
separate bug). We are in the process of fixing it and building a
sysbus whitelist on q35, but in the meantime we can fix the
"-device help" and "info qdm" bugs mentioned above. Also, despite
not being strictly necessary for fixing the q35 bug, reducing the
list of user_creatable=true devices will help us be more
confident when building the q35 whitelist.
xen: We also have a hack at xen_set_dynamic_sysbus(), that sets
has_dynamic_sysbus=true at runtime when using the Xen
accelerator. This hack is only used to allow xen-backend devices
to be dynamically plugged/unplugged.
This means today we can use -device with the following 22 device
types, that are the ones compiled into the qemu-system-x86_64 and
qemu-system-i386 binaries:
* allwinner-ahci
* amd-iommu
* cfi.pflash01
* esp
* fw_cfg_io
* fw_cfg_mem
* generic-sdhci
* hpet
* intel-iommu
* ioapic
* isabus-bridge
* kvmclock
* kvm-ioapic
* kvmvapic
* SUNW,fdtwo
* sysbus-ahci
* sysbus-fdc
* sysbus-ohci
* unimplemented-device
* virtio-mmio
* xen-backend
* xen-sysdev
This patch adds user_creatable=true explicitly to those devices,
temporarily, just to keep 100% compatibility with existing
behavior of q35. Subsequent patches will remove
user_creatable=true from the devices that are really not meant to
user-creatable on any machine, and remove the FIXME comment from
the ones that are really supposed to be user-creatable. This is
being done in separate patches because we still don't have an
obvious list of devices that will be whitelisted by q35, and I
would like to get each device reviewed individually.
Cc: Alexander Graf <agraf@suse.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: Gabriel L. Somlo <somlo@cmu.edu>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Pierre Morel <pmorel@linux.vnet.ibm.com>
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-block@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: sstabellini@kernel.org
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-3-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[ehabkost: Small changes at sysbus_device_class_init() comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
cannot_instantiate_with_device_add_yet was introduced by commit
efec3dd631 to replace no_user. It was
supposed to be a temporary measure.
When it was introduced, we had 54
cannot_instantiate_with_device_add_yet=true lines in the code.
Today (3 years later) this number has not shrunk: we now have
57 cannot_instantiate_with_device_add_yet=true lines. I think it
is safe to say it is not a temporary measure, and we won't see
the flag go away soon.
Instead of a long field name that misleads people to believe it
is temporary, replace it a shorter and less misleading field:
user_creatable.
Except for code comments, changes were generated using the
following Coccinelle patch:
@@
expression DC;
@@
(
-DC->cannot_instantiate_with_device_add_yet = false;
+DC->user_creatable = true;
|
-DC->cannot_instantiate_with_device_add_yet = true;
+DC->user_creatable = false;
)
@@
typedef ObjectClass;
expression dc;
identifier class, data;
@@
static void device_class_init(ObjectClass *class, void *data)
{
...
dc->hotpluggable = true;
+dc->user_creatable = true;
...
}
@@
@@
struct DeviceClass {
...
-bool cannot_instantiate_with_device_add_yet;
+bool user_creatable;
...
}
@@
expression DC;
@@
(
-!DC->cannot_instantiate_with_device_add_yet
+DC->user_creatable
|
-DC->cannot_instantiate_with_device_add_yet
+!DC->user_creatable
)
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170503203604.31462-2-ehabkost@redhat.com>
[ehabkost: kept "TODO remove once we're there" comment]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The function is only used once, and nothing else in migration knows
about objects. Create the function vmstate_device_is_migratable() in
savem.c that really do the bit that is related with migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This allows us to remove lots of includes of migration/migration.h
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the common utility function, which contains checks on return values
and first calls F_GETFD as recommended by POSIX.1-2001, instead of
manually calling fcntl.
CID: 1374831
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
CC: anthony.perard@citrix.com
CC: groug@kaod.org
CC: aneesh.kumar@linux.vnet.ibm.com
CC: Eric Blake <eblake@redhat.com>
The Xen mapcache is able to create long term mappings, they are called
"locked" mappings. The third parameter of the xen_map_cache call
specifies if a mapping is a "locked" mapping.
>From the QEMU point of view there are two kinds of long term mappings:
[a] device memory mappings, such as option roms and video memory
[b] dma mappings, created by dma_memory_map & friends
After certain operations, ballooning a VM in particular, Xen asks QEMU
kindly to destroy all mappings. However, certainly [a] mappings are
present and cannot be removed. That's not a problem as they are not
affected by balloonning. The *real* problem is that if there are any
mappings of type [b], any outstanding dma operations could fail. This is
a known shortcoming. In other words, when Xen asks QEMU to destroy all
mappings, it is an error if any [b] mappings exist.
However today we have no way of distinguishing [a] from [b]. Because of
that, we cannot even print a decent warning.
This patch introduces a new "dma" bool field to MapCacheRev entires, to
remember if a given mapping is for dma or is a long term device memory
mapping. When xen_invalidate_map_cache is called, we print a warning if
any [b] mappings exist. We ignore [a] mappings.
Mappings created by qemu_map_ram_ptr are assumed to be [a], while
mappings created by address_space_map->qemu_ram_ptr_length are assumed
to be [b].
The goal of the patch is to make debugging and system understanding
easier.
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlkZ9/QACgkQAvw66wEB28K5ogCfRdaHmD0dg4vOPzOcHycqgfBe
SaMAn1p66xcECwAG3SaJZhJD9Ur31mYy
=Uj5v
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'gkurz/tags/security-fix-for-2.10' into staging
Fix for CVE-2017-7493.
# gpg: Signature made Mon 15 May 2017 07:48:20 PM BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* gkurz/tags/security-fix-for-2.10:
9pfs: local: forbid client access to metadata (CVE-2017-7493)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using the mapped-file security mode, we shouldn't let the client mess
with the metadata. The current code already tries to hide the metadata dir
from the client by skipping it in local_readdir(). But the client can still
access or modify it through several other operations. This can be used to
escalate privileges in the guest.
Affected backend operations are:
- local_mknod()
- local_mkdir()
- local_open2()
- local_symlink()
- local_link()
- local_unlinkat()
- local_renameat()
- local_rename()
- local_name_to_path()
Other operations are safe because they are only passed a fid path, which
is computed internally in local_name_to_path().
This patch converts all the functions listed above to fail and return
EINVAL when being passed the name of the metadata dir. This may look
like a poor choice for errno, but there's no such thing as an illegal
path name on Linux and I could not think of anything better.
This fixes CVE-2017-7493.
Reported-by: Leo Gaspard <leo@gaspard.io>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=D0Hk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170511' into staging
ppc patch queue for 2017-05-11
This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.
Highlights of this set:
* Some fixes for POWER9
* TCG support for POWER9 radix MMU
* VGA rom for Mac machine types
* Fixes for the XICS interrupt controller
* MTTCG support for ppc targets
As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests. I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series. I'll continue working on this for
future pull requests. Specifically, 'travis', 'fedora', and 'centos6'
seem to work. 'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series. 'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.
# gpg: Signature made Thu 11 May 2017 05:13:46 AM BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.10-20170511: (23 commits)
target/ppc: Avoid printing wrong aliases in CPU help text
pnv: Fix build failures on some host platforms
target/ppc: Allow workarounds for POWER9 DD1
spapr: Don't accidentally advertise HTM support on POWER9
ppc: xics: fix compilation with CentOS 6
target/ppc: Enable RADIX mmu mode for pseries TCG guest
target/ppc: Implement ISA V3.00 radix page fault handler
target/ppc: Change tlbie invalid fields for POWER9 support
target/ppc: Update tlbie to check privilege level based on GTSE
target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for NewWorld Macs
ppc: add qemu_vga.ndrv ROM to fw_cfg interface for OldWorld Macs
Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submodule
Add QemuMacDrivers as submodule
ppc/xics: preserve P and Q bits for KVM IRQs
ppc/xics: Fix stale irq->status bits after get
target/ppc: do not reset reserve_addr in exec_enter
tcg: enable MTTCG by default for PPC64 on x86
cpus: Fix CPU unplug for MTTCG
target/ppc: Generate fence operations
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When starting QEMU with the legacy USB serial device like this:
qemu-system-x86_64 -usbdevice serial:vendorid=0x1234:stdio
it currently aborts since the vendorid property does not exist
anymore (it has been removed by commit f29783f72e):
Unexpected error in object_property_find() at qemu/qom/object.c:1008:
qemu-system-x86_64: -usbdevice serial:vendorid=0x1234:stdio: Property
'.vendorid' not found
Aborted (core dumped)
Fix this crash by issuing a more friendly error message instead
(and simplify the code also a little bit this way).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1493883704-27604-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The strict td link limit added by commit "05f43d4 xhci: limit the
number of link trbs we are willing to process" causes problems with
Windows guests. Let's raise the limit.
This change is analogous to:
commit ab6b1105a2
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Mar 7 09:40:18 2017 +0100
ohci: relax link check
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170512102100.22675-1-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The spec says:
Suspend: (PORT_SUSPEND) This field indicates whether or not the device
on this port is suspended. Setting this field causes the device to
suspend by not propagating bus traffic downstream. This field may be
reset by a request or by resume signaling from the device attached to
the port.
I can't find any specific statement like "the PORT_SUSPEND field is reset
automatically on remote wakeup", but without this patch, the only way to
reset it is via the ClearPortFeature request so the ".. or by resume
signaling from the device" clause is clearly not implemented on the remote
wakeup path.
The default xhci Windows driver does not issue the ClearPortFeature request
and suspended devices attached to a hub don't properly get out of the
suspended state. Interestingly, the default uhci Windows driver *does*
issue the ClearPortFeature request and does not exhibit this problem.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170511125314.24549-3-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
slotid and epid were deleted from XHCITransfer in commit d6fcb29.
Also deleting one unused forward declaration.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 20170511125314.24549-2-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't reinvent a broken wheel, just use the hexdump function we have.
Impact: low, broken code doesn't run unless you have debug logging
enabled.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170509110128.27261-1-kraxel@redhat.com
Move to virtio-gpu-3d.c where all the other virgl code lives too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170505104101.30589-2-kraxel@redhat.com
and remove corresponding part in numa.c that uses
node_cpu bitmaps.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-16-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
add machine_run_board_init() wrapper that calls machine
init for now but in follow up patches it will be used
to run generic machine code that should run before
machine init.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-15-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-11-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>