The loop is performing a simple boolean test for the existence
of a BP_CPU breakpoint at EIP. Plus it gets the iteration wrong,
if we happen to have a BP_GDB breakpoint at the same address.
We have a function for this: cpu_breakpoint_test.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210620062317.1399034-1-richard.henderson@linaro.org>
The errno numbers are very large on Haiku, so the linking currently
fails there with a "final link failed: memory exhausted" error
message. We should not use the errno number as array indexes here,
thus convert the code to a switch-case statement instead. A clever
compiler should be able to optimize this code in a similar way
anway.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210706081822.1316551-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The non-single-step case of gen_goto_tb may use
tcg_gen_lookup_and_goto_ptr to indirectly chain.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block").
In use_goto_tb, the check for singlestep_enabled is in the
generic translator_use_goto_tb. In s390x_tr_tb_stop, the
check for singlestep_enabled is in the preceding do_debug test.
Which leaves only FLAG_MASK_PER: fold that test alone into
the two callers of use_exit tb.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorder the control statements to allow using the page boundary
check from translator_use_goto_tb().
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not emit dead code for the singlestep_enabled case,
after having exited the TB with a debug exception.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The test for singlestepping is done in translator_use_goto_tb,
so we may elide it from cris_tr_tb_stop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these helpers end with cpu_loop_exit.
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Single stepping is not the only reason not to use goto_tb.
If goto_tb is disallowed, and single-stepping is not enabled,
then use tcg_gen_lookup_and_goto_tb to indirectly chain.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block"),
and gdbstub singlestep is handled by the generic function.
Drop the unused 'n' argument to use_goto_tb.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using gen_goto_tb directly misses the single-step check.
Let the branch or debug exception be emitted by arm_tr_tb_stop.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The number of links across (normal) pages using this is low,
and it will shortly violate the contract for breakpoints.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have not needed to end a TB for I/O since ba3e792669
("icount: clean up cpu_can_io at the entry to the block").
We do not need to use exit_tb for singlestep, which only
means generate one insn per TB.
Which leaves only singlestep_enabled, which means raise a
debug trap after every TB, which does not use exit_tb,
which would leave the function mis-named.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use raise_exception_ra (without error code) when raising the illegal
opcode operation; raise #GP when setting bits 63:32 of DR6 or DR7.
Move helper_get_dr to sysemu/ since it is a privileged instruction
that is not needed on user-mode emulators.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6[63:32] and DR7[63:32] are reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-3-laramglazier@gmail.com>
[Ignore for 32-bit builds. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The address of the last entry in the MSRPM and
in the IOPM must be smaller than the largest physical address.
(APM2 15.10-15.11)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nick Hudson <hnick@vmware.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If KVM_CAP_RPT_INVALIDATE KVM capability is enabled, then
- indicate the availability of H_RPT_INVALIDATE hcall to the guest via
ibm,hypertas-functions property.
- Enable the hcall
Both the above are done only if the new sPAPR machine capability
cap-rpt-invalidate is set.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20210706112440.1449562-3-bharata@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function ppc_tlb_invalid_all is not compiled anymore in a TCG-less
environment, and the call to that function has been disabled in this
situation
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20210708164957.28096-2-lucas.araujo@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Change the assert in ppc_store_sdr1() to allow vhyp to be set on CPUs
without HV bit. This allows using the vhyp interface for firmware
emulation on pegasos2.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <21c7745aabbb68fcc50bb2ffaf16b939ba21261c.1624811233.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
MSR is a 32-bit register in BookE and there is no mtmsrd instruction.
Cc: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210706051321.609046-1-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Changed hash32 address translation to use the supplied mmu_idx, instead
of using what was stored in the msr, for parity purposes (radix64
already uses that) and for conceptual correctness, all the relevant
functions should always use the supplied mmu_idx, as there are no
guarantees that the mmu_idx stored in the CPU variable will not desync.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210706150316.21005-3-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Intrudoce a header common to all BookS MMUs, that can hold code that is
common to hash32 and book3s-v3 MMUs.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210706150316.21005-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Changed hash64 address translation to use the supplied mmu_idx instead
of using the one stored in the msr, for parity purposes (other book3s
MMUs already use it).
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210628133610.1143-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This commit attempts to fix a technical hiccup first mentioned by Richard
Henderson in
https://lists.nongnu.org/archive/html/qemu-devel/2021-05/msg06247.html
To sumarize the hiccup here, when radix-style mmus are translating an
address, they might need to call a second level of translation, with
hypervisor privileges. However, the way it was being done up until
this point meant that the second level translation had the same
privileges as the first level. It could lead to a bug in address
translation when running KVM inside a TCG guest, but this bug was never
experienced by users, so this isn't as much a bug fix as it is a
correctness cleanup.
This patch attempts that cleanup by making radix64_*_xlate functions
receive the mmu_idx, and passing one with the correct permission for the
second level translation.
The mmuidx macros added by this patch are only correct for non-bookE
mmus, because BookE style set the IS and DS bits inverted and there
might be other subtle differences. However, there doesn't seem to be
BookE cpus that have radix-style mmus, so we left a comment there to
document the issue, in case a machine does have that and was missed.
As part of this cleanup, we now need to send the correct mmmu_idx
when calling get_phys_page_debug, otherwise we might not be able to see the
memory that the CPU could
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20210628133610.1143-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
