As we will not have a cpu_x86_find_by_name() function anymore,
move the KVM default-vendor hack to instance_init.
Unfortunately we can't move that code to class_init because it depends
on KVM being initialized.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As eventually the x86_def_t data is going to be provided by the CPU
class, it's better to not touch it, and handle the special cases on the
X86CPU object itself.
Current behavior of the code should stay exactly the same.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is already able to eliminate the kvm_arch_get_supported_cpuid()
calls in kvm_cpu_fill_host() and filter_features_for_kvm(), so we can
eliminate the CONFIG_KVM #ifdefs there.
Also, kvm_cpu_fill_host() and host_cpuid() don't need to check
CONFIG_KVM, as they don't have any KVM-specific function calls.
Tested to build successfully with CONFIG_KVM disabled, using the
following CFLAGS combinations: "-DNDEBUG", "-DNDEBUG -O', "-DNDEBUG
-O0", "-DNDEBUG -O1", "-DNDEBUG -O2".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
http://msdn.microsoft.com/en-us/library/windows/hardware/ff541625%28v=vs.85%29.aspx
This code is generic for activating reference time counter or virtual reference time stamp counter
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MS docs specify HV_X64_MSR_HYPERCALL as a mandatory interface,
thus we must provide the MSRs even if the user only specified
features that, like relaxed timing, in principle don't require them.
And the MSRs are only there if the hypervisor has KVM_CAP_HYPERV.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_init_vcpu's initialization of the KVM leaves at 0x40000100
is broken, because KVM_CPUID_FEATURES is left at 0x40000001. Move
it to 0x40000101 if Hyper-V is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need the ft[] array on kvm_check_features_against_host()
anymore, as we can simply use the feature_word_info[] array, that has
everything we need.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the kvm_cpu_fill_host() code is simplified, we can simply set
the feature word array using a simple loop.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reorder the code so all the code that sets x86_cpu_def->features is at
the end of the function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU xlevel2 before calling
kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_supported_cpuid() on the kernel
code)
* Similarly, the kernel won't return any entry for 0xC0000001 if
CPUID[0xC0000000].EAX is < 0xC0000001
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf
For similar reasons, we can simply set x86_cpu_def->xlevel2 directly
instead of making it conditional, because it will be set to 0 CPU vendor
is not Centaur.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Remove unparseable comment. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check CPU vendor before calling
kvm_arch_get_supported_cpuid(s, 0xC0000000, 0, R_EAX), because:
* The kernel won't return any entry for 0xC0000000 if host CPU vendor
is not Centaur (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check level (CPUID[0].EAX) before calling
kvm_arch_get_supported_cpuid(s, 0x7, 0, R_EBX), because:
* The kernel won't return any entry for CPUID 7 if CPUID[0].EAX is < 7
on the host (See kvm_dev_ioctl_get_cpuid() on the kernel code);
* kvm_arch_get_supported_cpuid() will return 0 if no entry is returned
by the kernel for the requested leaf.
This will simplify the kvm_cpu_fill_host() code a little.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those host_cpuid() calls are useless. They are leftovers from when the
old code using host_cpuid() was removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-kvm/uq/master:
kvm: always update the MPX model specific register
KVM: fix addr type for KVM_IOEVENTFD
KVM: Retry KVM_CREATE_VM on EINTR
mempath prefault: fix off-by-one error
kvm: x86: Separately write feature control MSR on reset
roms: Flush icache when writing roms to guest memory
target-i386: clear guest TSC on reset
target-i386: do not special case TSC writeback
target-i386: Intel MPX
Conflicts:
exec.c
aliguori: fix trivial merge conflict in exec.c
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The original patch from Liu Jinsong restricted them to reset or full
state updates, but that's unnecessary (and wrong) since the BNDCFGS
MSR has no side effects.
Cc: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated. Avoid re-computing the size of the operation across
gen_pop_T0 and gen_pop_update.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reduce ifdefs, share more code between paths, reduce the number of TCG
ops generated.
Add forgotten zero-extension in the TARGET_X86_64, !CODE64, ss32 case.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Unlike the addr32, there was no bug. But we can use the same
technique to reduce the number of TCG ops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
We now only have one domain for size operands inside the translator,
which makes things less confusing all the way around. There are
still a number of helpers that continue to use the log2-1 domain.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Which lets us defer completely to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Changing the domain to TCGMemOp makes it easier to interoperate
with other portions of the rest of the translator.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Change the domain of the parameter and update all callers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These functions used the aflags/dflags domain, which is log2-1
of the byte size. Confusingly, they used enumeration values
from the log2 domain.
Change the domain of the parameter and update all callers.
Since we're now in a common domain, defer the deposit/extend/mov
decision to gen_op_mov_reg_v.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The 'ot' variables (operand type?) hold the log2(byte size) of
the operand being manipulated. This is the same as the MO_SIZE
subset of the TCGMemOp. Indeed, we often pass 'ot' to the
tcg_gen_qemu_ld/st functions.
Changing the type from 'int' makes it easier to see what domain
the variable should be.
This does require adding some default cases to some switch statements,
to avoid the 'unhandled enumeration value' warning that would result
from the change of type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl, and in two cases merge with a
previous move from cpu_regs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace it with tcg_gen_ext16u_tl. In four places we can combine that
with a previous move into cpu_T[0], and in one place we can infer that
the zero-extension has already happened via the previous load.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. In two cases, this allows
us to share code between the 32-bit and 64-bit immediate moves.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definitions into all users. The only time that
gen_op_movl_T1_imu was used, the input was type 'unsigned',
so the replacement works identically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Propagate the definition of gen_op_movl_T0_im to all users.
The function gen_op_movl_T0_imu was unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the known MO_32/MO_64 cases, we don't need to extend a 32-bit temp
into a 64-bit temp before storing into the hardware register.
We do need the extension for the MO_8/MO_16 cases, in order for the
deposit_tl operation to work, so leave those alone.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_st_i32 directly to avoid the extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now use tcg_gen_qemu_ld_i32 directly to avoid the truncation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the 16 and 32-bit cases, we don't need to truncate via
a temporary register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The reg_ptr and offset_ptr outputs are universally unused.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always perform a sign-extending load. In the extremely unlikely
case that we've used an 0x66 prefix, the extension to 64-bits is
unnecessary but not wrong; the store will still examine only 16 bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can use the MO_SIGN bit to tidy the reg-reg switch statement
as well as pass it on to gen_op_ld_v, eliminating one call.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
By inspection, obviously we should be storing T[1] not T[0].
This could only happen for x86_64 in 64-bit mode with 0x66
prefix to call insn -- i.e. never.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Too many places have the same test vs OR_TMP0 to indicate
a write back to memory. Hoist that to a subroutine.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace its users by gen_op_ld_v with the MO_SIGN bit set.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The MO_8/16/32/64 constants have the same encoding and meaning
as the OT_BYTE/WORD/LONG/QUAD. Since we rely on them being the
same, for the qemu_ld/st helpers, standardize on the common names.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Stores only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In preference to the older helpers. Loads only in this patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that we don't combine mem_index with operand size info,
we don't need to encode it. Which tidies many places that
access it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than add s->mem_index into a combined size+mem_index
argument, pass the context down. This will allow cleaning
up s->mem_index later.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace an assert_no_error() usage with the error_abort system.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Features family, model, stepping, level, hv_spinlocks are treated similarly
when passed from command line, so it's not necessary to handle each of them
individually. Collapse them to one catch-all branch which will treat
any not explicitly handled feature in format 'foo=val'.
Any unknown feature will be rejected by property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Features check, enforce, hv_relaxed and hv_vapic are treated as boolean
set to 'on' when passed from command line, so it's not necessary to
handle each of them separately. Collapse them to one catch-all branch
which will treat any feature in format 'foo' as boolean set to 'on'.
Any unknown feature will be rejected by CPU property setter so there is no
need to check for unknown feature in cpu_x86_parse_featurestr(), therefore
it's replaced by above mentioned catch-all handler.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* Additionally convert check_cpuid & enforce_cpuid to bool and make them
members of X86CPU
* Make 'enforce' feature independent from 'check'
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When we're running in non-64bit mode with qemu-system-x86_64 we can
still end up with virtual addresses that are above the 32bit boundary
if a segment offset is set up.
GNU Hurd does exactly that. It sets the segment offset to 0x80000000 and
puts its EIP value to 0x8xxxxxxx to access low memory.
This doesn't hit us when we enable paging, as there we just mask away the
unused bits. But with real mode, we assume that vaddr == paddr which is
wrong in this case. Real hardware wraps the virtual address around at the
32bit boundary. So let's do the same.
This fixes booting GNU Hurd in qemu-system-x86_64 for me.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the guest is running in nested mode on system reset, clearing the
feature MSR signals the kernel to leave this mode. Recent kernels
processes this properly, but leave the VCPU state undefined behind. It
is the job of userspace to bring it to a proper shape. Therefore, write
this specific MSR first so that no state transfer gets lost.
This allows to cleanly reset a guest with VMX in use.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VCPU TSC is not cleared by a warm reset (*), which leaves some types of Linux
guests (non-pvops guests and those with the kernel parameter no-kvmclock set)
vulnerable to the overflow in cyc2ns_offset fixed by upstream commit
9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 ("sched/x86: Fix overflow in
cyc2ns_offset").
To put it in a nutshell, if such a Linux guest without the patch above applied
has been up more than 208 days and attempts a warm reset chances are that
the newly booted kernel will panic or hang.
(*) Intel Xeon E5 processors show the same broken behavior due to
the errata "TSC is Not Affected by Warm Reset" (Intel® Xeon®
Processor E5 Family Specification Update - August 2013): "The
TSC (Time Stamp Counter MSR 10H) should be cleared on
reset. Due to this erratum the TSC is not affected by warm
reset."
Cc: Will Auld <will.auld@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Newer kernels are capable of synchronizing TSC values of multiple VCPUs
on writeback, but we were excluding the power up case, which is not needed
anymore.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Add some MPX related definiation, and hardcode sizes and offsets
of xsave features 3 and 4. It also add corresponding part to
kvm_get/put_xsave, and vmstate.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Alex Williamson (1) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: fix cpuid leaf 0x0d
qemu: mempath: prefault pages manually (v4)
kvm: Query KVM for available memory slots
Message-id: 1386345276-9803-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Fix cpuid leaf 0x0d which incorrectly parsed eax and ebx.
However, before this patch the CPUID worked fine -- the .offset
field contained the size _and_ was stored in the register that
is supposed to hold the size (eax), and likewise the .size field
contained the offset _and_ was stored in the register trhat is
supposed to hold the offset (ebx).
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=c4Hz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-anthony' into staging
Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
qga: Fix compiler warnings (missing format attribute, wrong format strings)
mips jazz: do not raise data bus exception when accessing invalid addresses
target-i386: yield to another VCPU on PAUSE
rng-egd: offset the point when repeatedly read from the buffer
rng-egd: remove redundant free
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
vfio-pci: Fix multifunction=on
atomic.h: Fix build with clang
pc: get rid of builtin pvpanic for "-M pc-1.5"
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
sun4m: Add FCode ROM for TCX framebuffer
Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is
used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with
the APIC IDs that QEMU reserves for each package. This number must come
from "-smp" options rather than from the host CPUID.
It also turns out that this unsyncing makes Windows Server 2012R2 fail
to boot.
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Cc: Richard Henderson <rth@twiddle.net>
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This error was reported by valgrind when running qemu-system-x86_64
with kvm:
==975== Conditional jump or move depends on uninitialised value(s)
==975== at 0x521C38: cpuid_find_entry (kvm.c:176)
==975== by 0x5235BA: kvm_arch_init_vcpu (kvm.c:686)
==975== by 0x4D5175: kvm_init_vcpu (kvm-all.c:267)
==975== by 0x45035B: qemu_kvm_cpu_thread_fn (cpus.c:858)
==975== by 0xD361E0D: start_thread (pthread_create.c:311)
==975== by 0xD65E9EC: clone (clone.S:113)
==975== Uninitialised value was created by a stack allocation
==975== at 0x5226E4: kvm_arch_init_vcpu (kvm.c:446)
Instead of adding more memset calls for parts of cpuid_data, the existing
calls were removed and cpuid_data is now initialized completely in one
call.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Only the first item of the array was ever looked at. No
practical effect, but still worth fixing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
# By Paolo Bonzini (2) and Jan Kiszka (1)
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvmvapic: Prevent reading beyond the end of guest RAM
x86: cpuid: reconstruct leaf 0Dh data
x86: fix migration from pre-version 12
Message-id: 1382108641-4862-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Peter Maydell (3) and Ákos Kovács (2)
# Via Paolo Bonzini
* bonzini/configure:
ui/Makefile.objs: delete unnecessary cocoa.o dependency
default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: CONFIG_NO_* variables removed
rules.mak: New string testing functions
rules.mak: New logical functions for handling y/n values
CONFIG_NO_* variables replaced with the lnot logical function
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
[PMM: fixed a few CONFIG_NO_* uses that were missed]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-pull:
exec: Add both big- and little-endian memory helpers
tcg: Add qemu_ld_st_i32/64
tcg: Add TCGMemOp
configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION
tcg: Add tcg-be-ldst.h
tcg: Add tcg-be-null.h
exec: Delete is_tcg_gen_code and GETRA_EXT
tcg-aarch64: Update to helper_ret_*_mmu routines
tcg: Merge tcg_register_helper into tcg_context_init
tcg: Add tcg-runtime.c helpers to all_helpers
tcg: Put target helper data into an array.
tcg: Remove stray semi-colons from target-*/helper.h
tcg: Move helper registration into tcg_context_init
target-m68k: Rename helpers.h to helper.h
tcg: Use a GHashTable for tcg_find_helper
tcg: Delete tcg_helper_get_name declaration
tcg-hppa: Remove tcg backend
Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hQfy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
# gpg: Signature made Wed 09 Oct 2013 03:40:51 AM PDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (2) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpu: Drop cpu_model_str from CPU_COMMON
cpu: Move cpu_copy() into linux-user
cputlb: Remove dead function tlb_update_dirty()
cpu-exec: Also reload CPUClass *cc after longjmp return in cpu_exec()
target-i386: Set model=6 on qemu64 & qemu32 CPU models
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
From buildbot default_i386_rhel61:
CC i386-softmmu/target-i386/arch_memory_mapping.o
target-i386/arch_memory_mapping.c: In function 'walk_pde':
target-i386/arch_memory_mapping.c:110: warning:
integer constant is too large for 'long' type
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The data in leaf 0Dh depends on information from other feature bits.
Instead of passing it blindly from the host, compute it based on
whether these feature bits are enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
On KVM, the KVM_SET_XSAVE would be executed with a 0 xstate_bv,
and not restore anything.
Since FP and SSE data are always valid, set them in xstate_bv at reset
time. In fact, that value is the same that KVM_GET_XSAVE returns on
pre-XSAVE hosts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
There's no Intel CPU with family=6,model=2, and Linux and Windows guests
disable SEP when seeing that combination due to Pentium Pro erratum #82.
In addition to just having SEP ignored by guests, Skype (and maybe other
applications) runs sysenter directly without passing through ntdll on
Windows, and crashes because Windows ignored the SEP CPUID bit.
So, having model > 2 is a better default on qemu64 and qemu32 for two
reasons: making SEP really available for guests, and avoiding crashing
applications that work on bare metal.
model=3 would fix the problem, but it causes CPU enumeration problems
for Windows guests[1]. So let's set model=6, that matches "Athlon
(PM core)" on AMD and "P2 with on-die L2 cache" on Intel and it allows
Windows to use all CPUs as well as fixing sysenter.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=508623
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
When in Long Mode, cpu_x86_seg_cache() logs "DS16" because the Default
operation size bit (D/B bit) is not set for Long Mode Data Segments since
there are only Data Segments in Long Mode and no explicit 16/32/64-bit
Descriptors.
This patch fixes this by checking the Long Mode Active bit of the hidden
flags variable and logging "DS" if it is set. (I.e. in Long Mode all Data
Segments are logged as "DS")
Signed-off-by: Tobias Markus <tobias@markus-regensburg.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I don't know yet if want this feature on by default, so for now I'm
just adding support for "-cpu ...,+kvm_pv_unhalt".
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users running cpu intensive tasks checking the cache CPUID leaves at
startup and making decisions based on the result reported that the guest was
not reflecting the host CPUID leaves when -cpu host is used.
This patch fix this.
Signed-off-by: Benoît Canet <benoit@irqsave.net>
[Rename new field to cache_info_passthrough - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The instructions CMOVcc, FCMOVcc and F[U]COMI[P] should only be
present if the CMOV feature bit is set. Add missing feature bit
checks so we correctly fault if emulating a 486 or 586.
This fixes bug LP:1201446.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
CR4.PAE=1 will not enable paging if CR0.PG=0, but the "if" chain
in x86_cpu_get_phys_page_debug says otherwise. Check CR0.PG
before everything else.
Fixes "-d in_asm" for a code section at the beginning of OVMF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
This is an attempt to make the CPUID cache topology code clearer, by
replacing the magic numbers in the code with #defines, and moving all
the cache information to the same place in the file.
I took care of comparing the assembly output of compiling
target-i386/cpu.c before and after applying this change, to make sure
not a single bit was changed on cpu_x86_cpuid() before and after
applying this patch (unfortunately I had to manually check existing
differences, because of __LINE__ expansions on
object_class_dynamic_cast_assert() calls).
This even keeps the code bug-compatible with the previous version: today
the cache information returned on AMD cache information leaves (CPUID
0x80000005 & 0x80000006) do not match the information returned on CPUID
leaves 2 and 4. The L2 cache information on CPUID leaf 2 also doesn't
match the information on CPUID leaf 2. The new constants should make it
easier to eventually fix those inconsistencies. All inconsistencies I
have found are documented in code comments.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
The configuration of the timer represented by MSR_IA32_TSCDEADLINE depends on:
- APIC LVT Timer register.
- TSC value.
Change the order to respect the dependency.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch is to fix the bug https://bugs.launchpad.net/qemu-kvm/+bug/1207623
IA32_FEATURE_CONTROL is pointless if not expose VMX or SMX bits to
cpuid.1.ecx of vcpu. Current qemu-kvm will error return when kvm_put_msrs
or kvm_get_msrs.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
- since hyperv_* helper functions are used only in target-i386/kvm.c
move them there as static helpers
Requested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Error **errp argument is not for emitting warnings, it means an error
has occurred and the caller should not make any assumptions about the
state of other return values (unless otherwise documented).
Therefore cpu_x86_create() must unref the new X86CPU itself, and
pc_new_cpu() must check for an Error rather than NULL return value.
While at it, clean up a superfluous NULL check.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).
Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.
For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This will help us change the initialization code to not require carrying
some intermediate values in a x86_def_t struct (and eventually kill the
x86_def_t struct entirely).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code.
This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed".
The reason for the failure is that CPUClass::kvm_fd is not yet
initialized in the following call graph:
->x86_cpu_realizefn
->x86_cpu_apic_realize
->qdev_init
->device_set_realized
->device_reset (hotplugged == 1)
->apic_reset_common
->vapic_base_update
->kvm_apic_vapic_base_update
This causes attempted KVM vCPU ioctls to fail.
By contrast, in the non-hotplug case the APIC is reset much later, when
the vCPU is already initialized.
As a quick and safe solution, move the qemu_init_vcpu() call back into
the targets' realize functions.
Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386)
Tested-by: Jia Liu <proljc@gmail.com> (for openrisc)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Completes migration of target-specific code to new target-*/gdbstub.c.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This avoids polluting the global namespace with a non-prefixed macro and
makes it obvious in the call sites that we return.
Semi-automatic conversion using, e.g.,
sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c
followed by manual tweaking for sparc's GET_REGA() and Coding Style.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::gdb_num_regs replaces num_g_regs.
CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS.
Allows building gdb_register_coprocessor() for xtensa, too.
As a side effect this should fix coprocessor register numbering for SMP.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.
It also simplifies the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The recent KVM patch adds IA32_FEATURE_CONTROL support. QEMU needs
to clear this MSR when reset vCPU and keep the value of it when
migration. This patch add this feature.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
# By Michael R. Hines (8) and others
# Via Juan Quintela
* quintela/migration.next:
migration: add autoconvergence documentation
Fix real mode guest segments dpl value in savevm
Fix real mode guest migration
rdma: account for the time spent in MIG_STATE_SETUP through QMP
rdma: introduce MIG_STATE_NONE and change MIG_STATE_SETUP state transition
rdma: allow state transitions between other states besides ACTIVE
rdma: send pc.ram
rdma: core logic
rdma: introduce ram_handle_compressed()
rdma: bugfix: ram_control_save_page()
rdma: update documentation to reflect new unpin support
Message-id: 1374590725-14144-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Older KVM version put invalid value in the segments registers dpl field for
real mode guests (0x3).
This breaks migration from those hosts to hosts with unrestricted guest support.
We detect it by checking CS dpl value for real mode guest and fix the dpl values
of all the segment registers.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Older KVM versions save CS dpl value to an invalid value for real mode guests
(0x3). This patch detect this situation when loading CPU state and set all the
segments dpl to zero.
This will allow migration from older KVM on host without unrestricted guest
to hosts with restricted guest support.
For example migration from a Penryn host (with kernel 2.6.32) to
a Westmere host (for real mode guest) will fail with "kvm: unhandled exit 80000021".
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
This moves setting the Program Counter from gdbstub into target code.
Use vaddr type as upper-bound replacement for target_ulong.
Signed-off-by: Andreas Färber <afaerber@suse.de>
x86 was using additional CPU_DUMP_* flags, so make that configurable in
CPUClass::reset_dump_flags.
This adds reset logging for alpha, unicore32 and xtensa.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since log_cpu_state_mask() argument was changed to CPUState,
CPUArchState is no longer needed.
Choose CPUState rather than X86CPU to not hide type mismatches with CPU().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Also use bool type while at it.
Prepares for moving singlestep_enabled field to CPUState.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>