Initialize the dbs->in_cancel flag in dma_bdrv_io(), since qemu_aio_get()
does not return zero-initialized memory. Spotted by the clang sanitizer
(which complained when the value loaded in dma_complete() was not valid
for a bool type); this might have resulted in leaking the AIO block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.
This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.
As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If the guest attempts to execute from unreadable memory, this will
cause us to longjmp back to the main loop from inside the
target frontend decoder. For linux-user mode, this means we will
still hold the tb_ctx.tb_lock, and will deadlock when we try to
start executing code again. Unlock the lock in the return-from-longjmp
code path to avoid this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
When checking a page range, if we found that a page was
made read-only by QEMU because it contained translated code,
we were incorrectly returning immediately after unprotecting
that page, rather than continuing to check the entire range,
so we might fail to unprotect pages later in the range, or
might incorrectly return a "success" result even if later
pages were not writable.
In particular, this could cause segfaults in a case where
signals are delivered back to back on a target architecture
which uses trampoline code in the stack frame (as AArch64
currently does). The second signal causes a segfault because
the frame cannot be written to (it was protected because
we translated and executed the restorer trampoline, and the
unprotect logic did not unprotect the whole range).
Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com
[PMM: expanded commit message a bit]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the machine models which can have a Cortex-A15 CPU (vexpress-a15 and
midway), silently continue if the CPU object has no reset-cbar property
rather than failing. This allows these boards to be used under KVM with
the "-cpu host" option, since the 'host' CPU object has no reset-cbar
property.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
If the user passes an unknown CPU name via the '-cpu' option, exit
with an error message rather than segfaulting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Rob Herring <rob.herring@linaro.org>
qemu doesn't print these CRs any more. The test still didn't fail
because the output comparison ignores line endings, but the change turns
up each time when you want to update the output.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When qcow2_get_cluster_offset() sees a zero cluster in a version 2
image, it (rightfully) returns an error. But in doing so it shouldn't
leak an L2 table cache reference.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If lazy refcounts are enabled for a backing file, committing to this
backing file may leave it in a dirty state even if the commit succeeds.
The reason is that the bdrv_flush() call in bdrv_commit() doesn't flush
refcount updates with lazy refcounts enabled, and qcow2_reopen_prepare()
doesn't take care to flush metadata.
In order to fix this, this patch also fixes qcow2_mark_clean(), which
contains another ineffective bdrv_flush() call beause lazy refcounts are
disabled only afterwards. All existing callers of qcow2_mark_clean()
either don't modify refcounts or already flush manually, so that this
fixes only a latent, but not yet actually triggerable bug.
Another instance of the same problem is live snapshots. Again, a real
corruption is prevented by an explicit flush for non-read-only images in
external_snapshot_prepare(), but images using lazy refcounts stay dirty.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This eliminates the possible assertion failure in error_setg().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FreeBSD 10.0-RELEASE has bswap16() etc. macros defined in sys/endian.h,
which leads to a conflict with our static inline definitions.
Force using the system version of the macros.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6f1834a2b exposed a bug in openpic_kvm where we don't filter
for memory events that only happen to the region we want to know
events about.
Add proper filtering, fixing the e500plat target with KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1396431718-14908-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max WRITE SAME length is also used when the UNMAP bit is zero, so it
should be queried even if LBPWS=0. Same for the optimal transfer
length.
However, the write_zeroes_alignment only matters for UNMAP=1 so we
still restrict it to LBPWS=1.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Non-block SCSI devices do not support flushing, but we may still send
them requests via bdrv_flush_all. Just ignore them.
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some targets may return "invalid field" as the ASCQ from WRITE SAME
if they support the command only without the UNMAP field. Recognize
that, and return ENOTSUP just like for "invalid operation code".
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This assertion is invalid, because get_sg_list can return an
empty sg-list even for commands that transfer no data (such
as SYNCHRONIZE CACHE).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SystemTap sdt.h sometimes results in compiled probes without sufficient
information to extract arguments. This can be solved in a slightly
hacky way by encouraging the compiler to place arguments into registers.
This patch fixes the apic_reset_irq_delivered() trace event on Fedora 20
with gcc-4.8.2-7.fc20 and systemtap-sdt-devel-2.4-2.fc20 on x86_64.
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
preallocate() only links the first QCowL2Meta's data clusters into the
L2 table and ignores any chained QCowL2Metas in the linked list.
Chains of QCowL2Meta structs are built up when contiguous clusters span
L2 tables. Each QCowL2Meta describes one L2 table update. This is a
rare case in preallocate() but can happen.
This patch fixes preallocate() by iterating over the whole list of
QCowL2Metas. Compare with the qcow2_co_writev() function's
implementation, which is similar but also also handles request
dependencies. preallocate() only performs one allocation at a time so
there can be no dependencies.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids a possible division by zero.
Convert s->tracks to unsigned as well because it feels better than
surviving just because the results of calculations with s->tracks are
converted to unsigned anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first test case would cause a huge memory allocation, leading to a
qemu abort; the second one to a too small malloc() for the catalog
(smaller than s->catalog_size), which causes a read-only out-of-bounds
array access and on big endian hosts an endianess conversion for an
undefined memory area.
The sample image used here is not an original Parallels image. It was
created using an hexeditor on the basis of the struct that qemu uses.
Good enough for trying to crash the driver, but not for ensuring
compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Even with a limit of 64k snapshots, each snapshot could have a filename
and an ID with up to 64k, which would still lead to pretty large
allocations, which could potentially lead to qemu aborting. Limit the
total size of the snapshot table to an average of 1k per entry when
the limit of 64k snapshots is fully used. This should be plenty for any
reasonable user.
This also fixes potential integer overflows of s->snapshot_size.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids an unbounded allocation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For the L1 table to loaded for an internal snapshot, the code allocated
only enough memory to hold the currently active L1 table. If the
snapshot's L1 table is actually larger than the current one, this leads
to a buffer overflow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qcow2 code assumes that s->snapshots is non-NULL if s->nb_snapshots
!= 0. By having the initialisation of both fields separated in
qcow2_open(), any error occuring in between would cause the error path
to dereference NULL in qcow2_free_snapshots() if the image had any
snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bs->total_sectors is not the highest possible sector number that could
be involved in a copy on write operation: VM state is after the end of
the virtual disk. This resulted in wrong values for the number of
sectors to be copied (n).
The code that checks for the end of the image isn't required any more
because the code hasn't been calling the block layer's bdrv_read() for a
long time; instead, it directly calls qcow2_readv(), which doesn't error
out on VM state sector numbers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Limiting the size of a single request to INT_MAX not only fixes a
direct integer overflow in bdrv_check_request() (which would only
trigger bad behaviour with ridiculously huge images, as in close to
2^64 bytes), but can also prevent overflows in all block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This test checks for proper bounds checking of some VDI input
headers. The following is checked:
1. Max image size (1024TB) with the appropriate Blocks In Image
value (0x3fffffff) is detected as valid.
2. Image size exceeding max (1024TB) is seen as invalid
3. Valid image size but with Blocks In Image value that is too
small fails
4. Blocks In Image size exceeding max (0x3fffffff) is seen as invalid
5. 64MB image, with 64 Blocks In Image, and 1MB Block Size is seen
as valid
6. Block Size < 1MB not supported
7. Block Size > 1MB not supported
[Max Reitz <mreitz@redhat.com> pointed out that "1MB + 1" in the test
case is wrong. Change to "1MB + 64KB" to match the 0x110000 value.
--Stefan]
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both compressed and uncompressed I/O is buffered. dmg_open() calculates
the maximum buffer size needed from the metadata in the image file.
There is currently a buffer overflow since ->lengths[] is accounted
against the maximum compressed buffer size but actually uses the
uncompressed buffer:
switch (s->types[chunk]) {
case 1: /* copy */
ret = bdrv_pread(bs->file, s->offsets[chunk],
s->uncompressed_chunk, s->lengths[chunk]);
We must account against the maximum uncompressed buffer size for type=1
chunks.
This patch fixes the maximum buffer size calculation to take into
account the chunk type. It is critical that we update the correct
maximum since there are two buffers ->compressed_chunk and
->uncompressed_chunk.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The DMG metadata is stored as uint64_t, so use the same type for
sector_num. int was a particularly poor choice since it is only 32-bit
and would truncate large values.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Chunk length and sectorcount are used for decompression buffers as well
as the bdrv_pread() count argument. Ensure that they have reasonable
values so neither memory allocation nor conversion from uint64_t to int
will cause problems.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the right types instead of signed int:
size_t new_size;
This is a byte count for g_realloc() that is calculated from uint32_t
and size_t values.
uint32_t chunk_count;
Use the same type as s->n_chunks, which is used together with
chunk_count.
This patch is a cleanup and does not fix bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not necessary to check errno for EINTR and the block layer does
not produce short reads. Therefore we can drop the loop that attempts
to read a compressed chunk.
The loop is buggy because it incorrectly adds the transferred bytes
twice:
do {
ret = bdrv_pread(...);
i += ret;
} while (ret >= 0 && ret + i < s->lengths[chunk]);
Luckily we can drop the loop completely and perform a single
bdrv_pread().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a terminator is reached the base for offsets and sectors is stored.
The following records that are processed will use this base value.
If the first record we encounter is a terminator, then calculating the
base values would result in out-of-bounds array accesses. Don't do
that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up the mix of tabs and spaces, as well as the coding style
violations in block/dmg.c. There are no semantic changes since this
patch simply reformats the code.
This patch is necessary before we can make meaningful changes to this
file, due to the inconsistent formatting and confusing indentation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The size in bytes is assigned to an int later, so check that instead of
the number of entries.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to avoid integer overflows.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the size becomes larger than what qcow2_open() would accept, fail the
growing operation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This ensures that the checks catch all invalid cluster indexes
instead of returning the refcount of a wrong cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
free_cluster_index is only correct if update_refcount() was called from
an allocation function, and even there it's brittle because it's used to
protect unfinished allocations which still have a refcount of 0 - if it
moves in the wrong place, the unfinished allocation can be corrupted.
So not using it any more seems to be a good idea. Instead, use the
first requested cluster to do the calculations. Return -EAGAIN if
unfinished allocations could become invalid and let the caller restart
its search for some free clusters.
The context of creating a snapsnot is one situation where
update_refcount() is called outside of a cluster allocation. For this
case, the change fixes a buffer overflow if a cluster is referenced in
an L2 table that cannot be represented by an existing refcount block.
(new_table[refcount_table_index] was out of bounds)
[Bump the qemu-iotests 026 refblock_alloc.write leak count from 10 to
11.
--Stefan]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
len could become negative and would pass the check then. Nothing bad
happened because bdrv_pread() happens to return an error for negative
length values, but make variables for sizes unsigned anyway.
This patch also changes the behaviour to error out on invalid lengths
instead of silently truncating it to 1023.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>