memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-45-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-44-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-43-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-42-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-41-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-40-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-39-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-38-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-37-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-36-imammedo@redhat.com>
If user provided non-sense RAM size, board will complain and
continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be
possible for board to fix things up for user.
Make it error message and exit to force user fix CLI,
instead of accepting non-sense CLI values.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-35-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away,
so replace it with memdev allocated MemoryRegion.
The later is initialized by generic code, so board only
needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and then map memory region provided by
MachineState::ram_memdev
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-34-imammedo@redhat.com>
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-33-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-32-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-31-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-30-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
remove no longer needed IMX6Sabrelite
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-29-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-28-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-27-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-26-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-25-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-24-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-23-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
remove no longer needed MCIMX7Sabre
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-22-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
remove no longer needed MCIMX6ULEVK
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-21-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-20-imammedo@redhat.com>
If the user provided too large a RAM size, the code used to
complain and trim it to the max size. Now that RAM is allocated by
generic code, that's no longer possible, so generate an error and
exit instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-19-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-18-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-17-imammedo@redhat.com>
If user provided non-sense RAM size, board will complain and
continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be
possible for board to fix things up for user.
Make it error message and exit to force user fix CLI,
instead of accepting non-sense CLI values.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-16-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-15-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
remove no longer needed DigicBoardState
PS2:
while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-14-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
While at it, get rid of no longer needed CubieBoardState wrapper.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-13-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
PS:
- while at it add check for user supplied RAM size and error
out if it mismatches board expected value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-12-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-11-imammedo@redhat.com>
It's supposed that SOC will check if "-m" provided
RAM size is valid by setting "ram-size" property and
then board would read back valid (possibly corrected
value) to map RAM MemoryReging with valid size.
It isn't doing so, since check is called only
indirectly from
aspeed_sdmc_reset()->asc->compute_conf()
or much later when guest writes to configuration
register.
So depending on "-m" value QEMU end-ups with a warning
and an invalid MemoryRegion size allocated and mapped.
(examples:
-M ast2500-evb -m 1M
0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
0000000080000000-00000000800fffff (prio 0, ram): ram
0000000080100000-00000000bfffffff (prio 0, i/o): max_ram
-M ast2500-evb -m 3G
0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
0000000080000000-000000013fffffff (prio 0, ram): ram
[DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram
)
On top of that sdmc falls back and reports to guest
"default" size, it thinks machine should have.
This patch makes ram-size check actually work and
changes behavior from a warning later on during
machine reset to error_fatal at the moment SOC.ram-size
is set so user will have to fix RAM size on CLI
to start machine.
It also gets out of the way mutable ram-size logic,
so we could consolidate RAM allocation logic around
pre-allocated hostmem backend (supplied by user or
auto created by generic machine code depending on
supplied -m/mem-path/mem-prealloc options.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-10-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-9-imammedo@redhat.com>
Extend set_memory_options() to check that size specified by -m
matches the size of backend pointed by memory-backend.
And in case of -m was omitted adjust ram_size to match that
of explicitly provided backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-8-imammedo@redhat.com>
It will be possible for main RAM to come from memory-backend
and we should check that size specified in -m matches the size
of the backend and [MachineState::]ram_size also matches
backend's size.
However -m parsing (set_memory_options()) happens before backends
are intialized (object_create_delayed()) which complicates it.
Consolidate set_memory_options() and assigning parsed results to
current_machine after backends are initialized, so it would be
possible access the initialized backend instance to compare
sizes.
This patch only consolidates scattered places touching ram_size
within vl.c. And follow up patch will integrate backend handling
to set_memory_options().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-7-imammedo@redhat.com>
In case of NUMA there are 2 cases to consider:
1. '-numa node,memdev', the only one that will be available
for 5.0 and newer machine types.
In this case reuse current behavior, with only difference
memdevs are put into MachineState::ram container +
a temporary glue to keep memory_region_allocate_system_memory()
working until all boards converted.
2. fake NUMA ("-numa node mem" and default RAM splitting)
the later has been deprecated and will be removed but the former
is going to stay available for compat reasons for 5.0 and
older machine types
it takes allocate_system_memory_nonnuma() path, like non-NUMA
case and falls under conversion to memdev. So extend non-NUMA
MachineState::ram initialization introduced in previous patch
to take care of fake NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-6-imammedo@redhat.com>
the new field will be used by boards to get access to main
RAM memory region and will help to save boiler plate in
boards which often introduce a field or variable just for
this purpose.
Memory region will be equivalent to what currently used
memory_region_allocate_system_memory() is returning apart
from that it will come from hostmem backend.
Followup patches will incrementally switch boards to using
RAM from MachineState::ram.
Patch takes care of non-NUMA case and follow up patch will
initialize MachineState::ram for NUMA case.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-5-imammedo@redhat.com>
Allow machine to opt in for hostmem backend based initial RAM
even if user uses old -mem-path/prealloc options by providing
MachineClass::default_ram_id
Follow up patches will incrementally convert machines to new API,
by dropping memory_region_allocate_system_memory() and setting
default_ram_id that board used to use before conversion to keep
migration stream the same.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200219160953.13771-4-imammedo@redhat.com>
Property will contain link to memory backend that will be
used for backing initial RAM.
Follow up commit will alias -mem-path and -mem-prealloc
CLI options into memory backend options to make memory
handling consistent (using only hostmem backend family
for guest RAM allocation).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-3-imammedo@redhat.com>
it has been deprecated since 4.0 by commit
cb79224b7 (deprecate -mem-path fallback to anonymous RAM)
Deprecation period ran out and it's time to remove it
so it won't get in a way of switching to using hostmem
backend for RAM.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200219160953.13771-2-imammedo@redhat.com>
This patch implements functionalities of following ioctls:
SNDRV_TIMER_IOCTL_START - Start selected alsa timer
Starts the timer device that is selected. The third ioctl's argument is
ignored. Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT"
should be called first to select the timer that is to be started. If no
timer is selected, the error EBADFD ("File descriptor in bad shape")
is returned.
SNDRV_TIMER_IOCTL_STOP - Stop selected alsa timer
Stops the timer device that is selected. The third ioctl's argument is
ignored. Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT"
should be called first to select the timer that is to be stopped. If no
timer is selected, the error EBADFD ("File descriptor in bad shape")
is returned.
SNDRV_TIMER_IOCTL_CONTINUE - Continue selected alsa timer
Continues the timer device that is selected. The third ioctl's argument is
ignored. Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT"
should be called first to select the timer that is to be continued. If no
timer is selected, the error EBADFD ("File descriptor in bad shape")
is returned.
SNDRV_TIMER_IOCTL_PAUSE - Pause selected alsa timer
Pauses the timer device that is selected. The third ioctl's argument is
ignored. Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT"
should be called first to select the timer that is to be paused. If no
timer is selected, the error EBADFD ("File descriptor in bad shape")
is returned.
Implementation notes:
Since all of the implemented ioctls have NULL as their third argument,
their implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-13-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
SNDRV_TIMER_IOCTL_INFO - Getting information about selected timer
Read information about the selected timer. The information is returned in
the following structure:
struct snd_timer_info {
unsigned int flags; /* timer flags - SNDRV_TIMER_FLG_* */
int card; /* card number */
unsigned char id[64]; /* timer identificator */
unsigned char name[80]; /* timer name */
unsigned long reserved0; /* reserved for future use */
unsigned long resolution; /* average period resolution in ns */
unsigned char reserved[64]; /* reserved for future use */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT" should be
called first to select the timer which information is to be obtained. If no
timer is selected, the error EBADFD ("File descriptor in bad shape") is
returned.
SNDRV_TIMER_IOCTL_PARAMS - Setting parameters for selected timer
Sets parameters for the selected timer. The paramaters are set in the
following structure:
struct snd_timer_params {
unsigned int flags; /* flags - SNDRV_TIMER_PSFLG_* */
unsigned int ticks; /* requested resolution in ticks */
unsigned int queue_size; /* total size of queue (32-1024) */
unsigned int reserved0; /* reserved, was: failure locations */
unsigned int filter; /* event filter */
unsigned char reserved[60]; /* reserved */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT" should be
called first to select the timer which parameters are to be set. If no
timer is selected, the error EBADFD ("File descriptor in bad shape") is
returned.
SNDRV_TIMER_IOCTL_STATUS - Getting status of selected timer
Read status of the selected timer. The status of the timer is returned in
the following structure:
struct snd_timer_status {
struct timespec tstamp; /* Timestamp - last update */
unsigned int resolution; /* current period resolution in ns */
unsigned int lost; /* counter of master tick lost */
unsigned int overrun; /* count of read queue overruns */
unsigned int queue; /* used queue size */
unsigned char reserved[64]; /* reserved */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling this ioctl, the ioctl "SNDRV_TIMER_IOCTL_SELECT" should be
called first to select the timer which status is to be obtained. If no
timer is selected, the error EBADFD ("File descriptor in bad shape") is
returned.
Implementation notes:
All ioctls in this patch have pointer to some kind of a structure
as their third argument. That is the reason why corresponding
definitions were added in 'linux-user/syscall_types.h'. Structure
'snd_timer_status' has field of type 'struct timespec' which is why
a corresponding definition of that structure was also added in
'linux-user/syscall_types.h'. All of these strucutures have some
fields that are of type 'unsigned long'. That is the reason why
separate target structures were defined in 'linux-user/syscall_defs.h'.
Structure 'struct timespec' already had a separate target definition
so that definition was used to define a target structure for
'snd_timer_status'. The rest of the implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-12-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionality of following ioctl:
SNDRV_TIMER_IOCTL_SELECT - Selecting timer
Selects the timer which id is specified. The timer id is specified in the
following strcuture:
struct snd_timer_select {
struct snd_timer_id id; /* timer ID */
unsigned char reserved[32]; /* reserved */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling the ioctl, the field "tid" should be initialized with the id
information for the timer which is to be selected. If there is no timer
device with the specified id, the error ENODEV ("No such device") is
returned.
Implementation notes:
Ioctl implemented in this patch has a pointer to a
'struct snd_timer_select' as its third argument.
That is the reason why a corresponding definition
was added in 'linux-user/syscall_types.h'. The rest
of the implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-11-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
SNDRV_TIMER_IOCTL_GINFO - Getting information about specified timer
Read information about the specified timer. The information about the
timer is returned in the following structure:
struct snd_timer_ginfo {
struct snd_timer_id tid; /* requested timer ID */
unsigned int flags; /* timer flags - SNDRV_TIMER_FLG_* */
int card; /* card number */
unsigned char id[64]; /* timer identification */
unsigned char name[80]; /* timer name */
unsigned long reserved0; /* reserved for future use */
unsigned long resolution; /* average period resolution in ns */
unsigned long resolution_min; /* minimal period resolution in ns */
unsigned long resolution_max; /* maximal period resolution in ns */
unsigned int clients; /* active timer clients */
unsigned char reserved[32]; /* reserved */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling the ioctl, the field "tid" should be initialized with the id
information for the timer which information is to be obtained. After the
ioctl call, the rest of the structure fields are filled with values from
the timer device with the specified id. If there is no device with the
specified id, the error ENODEV ("No such device") is returned.
SNDRV_TIMER_IOCTL_GPARAMS - Setting precise period duration
Sets timer precise period duration numerator and denominator in seconds. The
period duration is set in the following structure:
struct snd_timer_gparams {
struct snd_timer_id tid; /* requested timer ID */
unsigned long period_num; /* period duration - numerator */
unsigned long period_den; /* period duration - denominator */
unsigned char reserved[32]; /* reserved */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling the ioctl, the field "tid" should be initialized with the id
information for the timer which period duration is to be set. Also, the
fileds "period_num" and "period_den" should be filled with the period
duration numerator and denominator values that are to be set respectively.
If there is no device with the specified id, the error ENODEV ("No such
device") is returned.
SNDRV_TIMER_IOCTL_GSTATUS - Getting current period resolution
Read timer current period resolution in nanoseconds and period resolution
numerator and denominator in seconds. The period resolution information is
returned in the following structure:
struct snd_timer_gstatus {
struct snd_timer_id tid; /* requested timer ID */
unsigned long resolution; /* current period resolution in ns */
unsigned long resolution_num; /* period resolution - numerator */
unsigned long resolution_den; /* period resolution - denominator */
unsigned char reserved[32]; /* reserved for future use */
};
A pointer to this structure should be passed as the third ioctl's argument.
Before calling the ioctl, the field "tid" should be initialized with the id
information for the timer which period resolution is to be obtained. After
the ioctl call, the rest of the structure fields are filled with values
from the timer device with the specified id. If there is no device with the
specified id, the error ENODEV ("No such device") is returned.
Implementation notes:
All ioctls in this patch have pointer to some kind of a structure as their
third argument. That is the reason why corresponding definitions were added
in 'linux-user/syscall_types.h'. All of these strcutures have some fields
that are of type 'unsigned long'. That is the reason why separate target
structures were defined in 'linux-user/syscall_defs.h'. Also, all of the
structures have a field with type 'struct snd_timer_id' which is the reason
why a separate target structure 'struct target_snd_timer_id' was also
defined. The rest of the implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-10-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
SNDRV_TIMER_IOCTL_PVERSION - Getting the sound timer version
Read the sound timer version. The third ioctl's argument is
a pointer to an int in which the specified timers version
is returned.
SNDRV_TIMER_IOCTL_NEXT_DEVICE - Getting id information about next timer
Read id information about the next timer device from the sound timer
device list. The id infomration is returned in the following structure:
struct snd_timer_id {
int dev_class; /* timer device class number */
int dev_sclass; /* slave device class number (unused) */
int card; /* card number */
int device; /* device number */
int subdevice; /* sub-device number */
};
The devices in the sound timer device list are arranged by the fields
of this structure respectively (first by dev_class number, then by
card number, ...). A pointer to this structure should be passed as
the third ioctl's argument. Before calling the ioctl, the parameters
of this structure should be initialized in relation to the next timer
device which information is to be obtained. For example, if a wanted
timer device has the device class number equal to or bigger then 2,
the field dev_class should be initialized to 2. After the ioctl call,
the structure fields are filled with values from the next device in
the sound timer device list. If there is no next device in the list,
the structure is filled with "zero" id values (in that case all
fields are filled with value -1).
Implementation notes:
The ioctl 'SNDRV_TIMER_IOCTL_NEXT_DEVICE' has a pointer to a
'struct snd_timer_id' as its third argument. That is the reason why
corresponding definition is added in 'linux-user/syscall_types.h'.
Since all elements of this structure are of type 'int', the rest of
the implementation was straightforward.
The line '#include <linux/rtc.h>' was added to recognize
preprocessor definitions for these ioctls. This needs to be
done only once in this series of commits. Also, the content
of this file (with respect to ioctl definitions) remained
unchanged for a long time, therefore there is no need to
worry about supporting older Linux kernel version.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-8-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that all uses have been migrated to `qemu_log' it is no longer
needed.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20200204025416.111409-4-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>