Using s->snapshots_size instead of snapshots_size for the metadata
overlap check in qcow2_write_snapshots leads to the detection of an
overlap with the main qcow2 image header when deleting the last
snapshot, since s->snapshots_size has not yet been updated and is
therefore non-zero. However, the offset returned by qcow2_alloc_clusters
will be zero since snapshots_size is zero. Therefore, an overlap is
detected albeit no such will occur.
This patch fixes this by replacing s->snapshots_size by snapshots_size
when calling qcow2_pre_write_overlap_check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I don't know yet if want this feature on by default, so for now I'm
just adding support for "-cpu ...,+kvm_pv_unhalt".
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some users running cpu intensive tasks checking the cache CPUID leaves at
startup and making decisions based on the result reported that the guest was
not reflecting the host CPUID leaves when -cpu host is used.
This patch fix this.
Signed-off-by: Benoît Canet <benoit@irqsave.net>
[Rename new field to cache_info_passthrough - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM request types are normally defined using hex constants but QEMU traces
print decimal values instead, which is not very convenient.
This changes the request type format from %d to %x.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's
STANDBY, also clear rom_state_paddr when going back to this state.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ROM layout may change after reset of devices are hotplugged, so we have
to pick up the physical address again when the ROM is initialized. This
is best achieved by resetting the state to INACTIVE.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not caught early, a zero-length ROM will cause a NULL-pointer access
later on in patch_hypercalls when allocating a zero-length ROM copy and
trying to read from it.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On PPC64 systems MSI Messages are translated to system IRQ in a PCI
host bridge. This is already supported for emulated MSI/MSIX but
not for irqfd where the current QEMU allocates IRQ numbers from
irqchip and maps MSIMessages to IRQ in the host kernel.
This adds a new direct mapping flag which tells
the kvm_irqchip_add_msi_route() function that a new VIRQ
should not be allocated, instead the value from MSIMessage::data
should be used. It is up to the platform code to make sure that
this contains a valid IRQ number as sPAPR does in spapr_pci.c.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment in kvm_max_vcpus() states that it's using the recommended
procedure from the kernel API documentation to get the max number
of vcpus that kvm supports. It is, but by always returning the
maximum number supported. The maximum number should only be used
for development purposes. qemu should check KVM_CAP_NR_VCPUS for
the recommended number of vcpus. This patch adds a warning if a user
specifies a number of cpus between the recommended and max.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
MADV_DONTFORK prevents fork to fail with -ENOMEM if the default
overcommit heuristics decides there's too much anonymous virtual
memory allocated. If the KVM secondary MMU is synchronized with MMU
notifiers or not, doesn't make a difference in that regard.
Secondly it's always more efficient to avoid copying the guest
physical address space in the fork child (so we avoid to mark all the
guest memory readonly in the parent and so we skip the establishment
and teardown of lots of pagetables in the child).
In the common case we can ignore the error if MADV_DONTFORK is not
available. Leave a second invocation that errors out in the KVM path
if MMU notifiers are missing and KVM is enabled, to abort in such
case.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The /perf/nesting benchmark is broken because the counters are
not reset after each iteration. Therefore, nesting is done only
on the first iteration, and skipped on every other.
This patch fixes the issue, and reduces the number of iterations
to make it possible to run the benchmark in a reasonable amount of
time.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Current coroutine performance benchmarks test only coroutine creation,
either directly or in a nested way. This patch adds a benchmark to
evaluate the performance of qemu_coroutine_yield.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The USBPacket-s in the transfers need to be cleaned up so that the memory
allocated by the iovec in there gets freed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And use it instead of prying the USBEndpoint out of the packet struct
in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transfers are part of an epctx, which is part of a slot, which is part of
a xhci. Transfers cannot dynamically be moved from one epctx to another,
so once created their xhci, slotid and epid are constant, so lets set these
up at creation time, rather then re-initializing them with the same
value each time a transfer gets submitted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the xhci spec the total number of streams is
2 ^ (MaxPStreams + 1), and this is also how the Linux xhci driver
uses this field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We can deduce the result from expire_time, by making it always -1 if
the timer is not in the active_timers list. We need to check against
negative times passed to timer_mod_ns; clamping them to zero is not
a problem because the only clock that has a zero value at VM startup
is QEMU_CLOCK_VIRTUAL, and it is monotonic so it cannot be non-zero.
QEMU_CLOCK_HOST, instead, is not monotonic but it cannot go to negative
values unless the host time is seriously screwed up and points to
the 1960s.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers. This allows qemu_timer_mod_ns() to be called from any
thread.
Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.
The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
host_alarm_handler() is invoked from the signal processing thread
(currently the iothread). Previously we did processing in a real signal
handler with signalfd and therefore needed signal-safe timer code.
Today host_alarm_handler() just marks the alarm timer as expired/pending
and notifies the main loop using qemu_notify_event().
Therefore these outdated comments about signal safety can be dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Print a warning when opening a file O_DIRECT fails with EINVAL. This
saves users a lot of time trying to figure out the EINVAL error, which
is typical when attempting to open a file O_DIRECT on Linux tmpfs.
Reported-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Drop unneeded info, fix some of the examples and rename QEMU Monitor
Protocol to QEMU Machine Protocol.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This file should be generated in the BUILD_DIR, as all other docs.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Populate it with all scripts stored in QMP/. Also fixes trailing
whitespaces in qmp-shell and qmp.py.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Nowdays rom size is fixed at 8192 for live migration compat reasons.
So we can ditch the pointless math trying to calculate the size needed.
Also make the size sanity check fail at compile time not runtime.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Debian wheezy includes libiscsi-dev 1.4.0 which does not provide
SCSI_PROVISIONING_TYPE_DEALLOCATED. Drop iscsi_co_get_block_status
in this case to allow compilation without errors.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add myself to the MAINTAINERS file. I'll be looking at qemu-seccomp.c
and include/sysemu/seccomp.h.
Signed-off-by: Eduardo Otubo <otubo@linux.vnet.ibm.com>
Acked-by: Paul Moore <pmoore@redhat.com>
Message-id: 1378746255-2089-1-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Liu Ping Fan (3) and Jan Kiszka (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
slirp: clean up slirp_update_timeout
slirp: set mainloop timeout with more precise value
slirp: define timeout as macro
slirp: make timeout local
Message-id: cover.1379415024.git.jan.kiszka@siemens.com
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
qemu-iotests: Fix test 038
block: Assert validity of BdrvActionOps
qemu-iotests: Cleanup test image in test number 007
qemu-img: fix invalid JSON
coroutine: add ./configure --disable-coroutine-pool
qemu-iotests: Adjustments due to error propagation
qcow2: Use Error parameter
qemu-img create: Emit filename on error
block: Error parameter for create functions
block: Error parameter for open functions
bdrv: Use "Error" for creating images
bdrv: Use "Error" for opening images
qemu-iotests: add 057 internal snapshot for block device test case
hmp: add interface hmp_snapshot_delete_blkdev_internal
hmp: add interface hmp_snapshot_blkdev_internal
qmp: add interface blockdev-snapshot-delete-internal-sync
qmp: add interface blockdev-snapshot-internal-sync
qmp: add internal snapshot support in qmp_transaction
snapshot: distinguish id and name in snapshot delete
snapshot: new function bdrv_snapshot_find_by_id_and_name()
...
Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
# By Paolo Bonzini (1) and Peter Maydell (1)
# Via Richard Henderson
* rth/tgt-i386:
target-i386: Only provide CMOV and friends if feature bit set
target-i386: fix disassembly with PAE=1, PG=0
Message-id: 1379010496-5875-1-git-send-email-rth@twiddle.net
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
spapr-vscsi: Report error on unsupported MAD requests
spapr-vscsi: Adding VSCSI capabilities
iscsi: split discard requests in multiple parts
iscsi: add .bdrv_get_block_status
iscsi: add logical block provisioning information to iscsilun
hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
hw/scsi/lsi53c895a: Use sextract32 for sign-extension
scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
virtio-scsi: Make type virtio-scsi-common abstract
spapr-vscsi: add task management
scsi: prefer UUID to VM name for the initiator name
Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
If slirp needs to emulate tcp timeout, then the timeout value
for mainloop should be more precise, which is determined by
slirp's fasttimo or slowtimo. Achieve this by swap the logic
sequence of slirp_pollfds_fill and slirp_update_timeout.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
