Switch from atexit.register() to a more elegant idiom of declaring
resources in a with statement:
with FilePath('monitor.sock') as monitor_path,
VM() as vm:
...
The files and VMs will be automatically cleaned up whether the test
passes or fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The scratch/ (TEST_DIR) directory is not automatically cleaned up after
test execution. It is the responsibility of tests to remove any files
they create.
A nice way of doing this is to declare files at the beginning of the
test and automatically remove them with a context manager:
with iotests.FilePath('test.img') as img_path:
qemu_img(...)
qemu_io(...)
# img_path is guaranteed to be deleted here
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are a number of ways to ensure that the QEMU process is shut down
when the test ends, including atexit.register(), try: finally:, or
unittest.teardown() methods. All of these require extra code and the
programmer must remember to add vm.shutdown().
A nice solution is context managers:
with VM(binary) as vm:
...
# vm is guaranteed to be shut down here
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20170824072202.26818-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As future sun4u PCI topologies place the ebus containing the in-built devices
behind a PCI bridge, add a busA property to the PBM PCI bridge that is then
used to allow IO accesses by default.
This allows early fw_cfg/NVRAM/serial access to occur even before OpenBIOS
has had a chance to configure the PCI bridges.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Rather than referring to the PCI busses as bus2 and bus3, refer to them as
busA and busB as per the documentation. Also replace the long bus names with
the shorter pciA and pciB aliases (to make it easier to attach additional
devices to either from the command line).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To allow future changes to the sun4u PCI topology.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-By: Artyom Tarasenko <atar4qemu@gmail.com>
In order to wire up the ebus PCI address spaces differently then we need
access to the underlying PCIDevice.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Omitting the check for whether bdrv_getlength() and bdrv_truncate()
failed meant that it was theoretically possible to return an
incorrect offset to the caller. More likely, conditions for either
of these functions to fail would also cause one of our other calls
(such as bdrv_pread() or bdrv_pwrite_sync()) to also fail, but
auditing that we are safe is difficult compared to just patching
things to always forward on the error rather than ignoring it.
Use osdep.h macros instead of open-coded rounding while in the
area.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The old signature has an ambiguous meaning for a return of 0:
either no allocation was requested or necessary, or an error
occurred (but any errno associated with the error is lost to
the caller, which then has to assume EIO).
Better is to follow the example of qcow2, by changing the
signature to have a separate return value that cleanly
distinguishes between failure and success, along with a
parameter that cleanly holds a 64-bit value. Then update all
callers.
While auditing that all return paths return a negative errno
(rather than -1), I also simplified places where we can pass
NULL rather than a local Error that just gets thrown away.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that bdrv_truncate is passed to bs->file by default, remove the
callback from block/blkdebug.c and set is_filter to true. is_filter also gives
access to other callbacks that are forwarded automatically to bs->file for
filters.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following functions fail if bs->drv is a filter and does not
implement them:
bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info
Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix the following warning:
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses]
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^ ~
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: note: add parentheses after the '!' to evaluate the bitwise operator first
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^
/home/pranith/qemu/hw/intc/arm_gicv3_kvm.c:296:17: note: add parentheses around left hand side expression to silence this warning
if (!c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) {
^
This logic error meant we were not setting the PTZ
bit when we should -- luckily as the comment suggests
this wouldn't have had any effects beyond making GIC
initialization take a little longer.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-id: 20170829173226.7625-1-bobby.prani@gmail.com
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For "ldp x0, x1, [x0]", if the second load is on a second page and
the second page is unmapped, the exception would be raised with x0
already modified. This means the instruction couldn't be restarted.
Cc: qemu-arm@nongnu.org
Cc: qemu-stable@nongnu.org
Reported-by: Andrew <andrew@fubar.geek.nz>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20170825224833.4463-1-richard.henderson@linaro.org
Fixes: https://bugs.launchpad.net/qemu/+bug/1713066
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: tweaked comment format]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently shows some unexpected behavior when the user trys to
do a "device_add digic" on an unrelated ARM machine like integratorcp
in "-nographic" mode (the device_add command does not immediately
return to the monitor prompt), and trying to "device_del" the device
later results in a "qemu/qdev-monitor.c:872:qdev_unplug: assertion
failed: (hotplug_ctrl)" error condition.
Looking at the realize function of the device, it uses serial_hds
directly and this means that the device can not be added a second
time, so let's simply mark it with "user_creatable = false" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU currently aborts if the user is accidentially trying to
do something like this:
$ aarch64-softmmu/qemu-system-aarch64 -S -M integratorcp -nographic
QEMU 2.9.93 monitor - type 'help' for more information
(qemu) device_add ast2400
Unexpected error in error_set_from_qdev_prop_error()
at hw/core/qdev-properties.c:1032:
Aborted (core dumped)
The ast2400 SoC devices are clearly not creatable by the user since
they are using the serial_hds and nd_table arrays directly in their
realize function, so mark them with user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For external aborts, we will want to be able to specify the EA
(external abort type) bit in the syndrome field. Allow callers of
deliver_fault() to do that by adding a field to ARMMMUFaultInfo which
we use when constructing the syndrome values.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
We currently have some similar code in tlb_fill() and in
arm_cpu_do_unaligned_access() for delivering a data abort or prefetch
abort. We're also going to want to do the same thing to handle
external aborts. Factor out the common code into a new function
deliver_fault().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Call the new cpu_transaction_failed() hook at the places where
CPU generated code interacts with the memory system:
io_readx()
io_writex()
get_page_addr_code()
Any access from C code (eg via cpu_physical_memory_rw(),
address_space_rw(), ld/st_*_phys()) will *not* trigger CPU exceptions
via cpu_transaction_failed(). Handling for transactions failures for
this kind of call should be done by using a function which returns a
MemTxResult and treating the failure case appropriately in the
calling code.
In an ideal world we would not generate CPU exceptions for
instruction fetch failures in get_page_addr_code() but instead wait
until the code translation process tried a load and it failed;
however that change would require too great a restructuring and
redesign to attempt at this point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Currently we have a rather half-baked setup for allowing CPUs to
generate exceptions on accesses to invalid memory: the CPU has a
cpu_unassigned_access() hook which the memory system calls in
unassigned_mem_write() and unassigned_mem_read() if the current_cpu
pointer is non-NULL. This was originally designed before we
implemented the MemTxResult type that allows memory operations to
report a success or failure code, which is why the hook is called
right at the bottom of the memory system. The major problem with
this is that it means that the hook can be called even when the
access was not actually done by the CPU: for instance if the CPU
writes to a DMA engine register which causes the DMA engine to begin
a transaction which has been set up by the guest to operate on
invalid memory then this will casue the CPU to take an exception
incorrectly. Another minor problem is that currently if a device
returns a transaction error then this won't turn into a CPU exception
at all.
The right way to do this is to have allow the CPU to respond
to memory system transaction failures at the point where the
CPU specific code calls into the memory system.
Define a new QOM CPU method and utility function
cpu_transaction_failed() which is called in these cases.
The functionality here overlaps with the existing
cpu_unassigned_access() because individual target CPUs will
need some work to convert them to the new system. When this
transition is complete we can remove the old cpu_unassigned_access()
code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move the MemTxResult type to memattrs.h. We're going to want to
use it in cpu/qom.h, which doesn't want to include all of
memory.h. In practice MemTxResult and MemTxAttrs are pretty
closely linked since both are used for the new-style
read_with_attrs and write_with_attrs callbacks, so memattrs.h
is a reasonable home for this rather than creating a whole
new header file for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
This is required to configure differences in behaviour between the
AST2400 and AST2500 watchdog IPs.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The reset width register controls how the pulse on the SoC's WDTRST{1,2}
pins behaves. A pulse is emitted if the external reset bit is set in
WDT_CTRL. On the AST2500 WDT_RESET_WIDTH can consume magic bit patterns
to configure push-pull/open-drain and active-high/active-low
behaviours and thus needs some special handling in the write path.
As some of the capabilities depend on the SoC version a silicon-rev
property is introduced, which is used to guard version-specific
behaviour.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a KVM PMU init or set-irq attr call fails we just silently stop
the PMU DT node generation. The only way they could fail, though,
is if the attr's respective KVM has-attr call fails. But that should
never happen if KVM advertises the PMU capability, because both
attrs have been available since the capability was introduced. Let's
just abort if this should-never-happen stuff does happen, because,
if it does, then something is obviously horribly wrong.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-5-git-send-email-drjones@redhat.com
[PMM: change kvm32.c kvm_arm_pmu_init() to the new API too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the in-kernel-irqchip test to only guard the set-irq
stage, not the init stage of the PMU. Also add the PMU to
the KVM device irq line synchronization to enable its use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When adding a PMU with a userspace irqchip we skip the set-irq
stage of device creation. Split the 'create' function into two
functions 'init' and 'set-irq' so they may be called separately.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Message-id: 1500471597-2517-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mimicking gicv3-maintenance-interrupt, add the PMU's interrupt to
CPU state.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500471597-2517-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ELF files have program headers that specify segments that
are of zero size. Ignore them, rather than trying to create
zero-length ROM blobs for them, because the zero-length blob
can falsely trigger the overlapping-ROM-blobs check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Hua Yanghao <huayanghao@gmail.com>
Message-id: 1502116754-18867-3-git-send-email-peter.maydell@linaro.org
For embedded systems, notably ARM, one common use of ELF
file segments is that the 'physical addresses' represent load addresses
and the 'virtual addresses' execution addresses, such that
the load addresses are packed into ROM or flash, and the
relocation and zero-initialization of data is done at runtime.
This means that the 'memsz' in the segment header represents
the runtime size of the segment, but the size that needs to
be loaded is only the 'filesz'. In particular, paddr+memsz
may overlap with the next segment to be loaded, as in this
example:
0x70000001 off 0x00007f68 vaddr 0x00008150 paddr 0x00008150 align 2**2
filesz 0x00000008 memsz 0x00000008 flags r--
LOAD off 0x000000f4 vaddr 0x00000000 paddr 0x00000000 align 2**2
filesz 0x00000124 memsz 0x00000124 flags r--
LOAD off 0x00000218 vaddr 0x00000400 paddr 0x00000400 align 2**3
filesz 0x00007d58 memsz 0x00007d58 flags r-x
LOAD off 0x00007f70 vaddr 0x20000140 paddr 0x00008158 align 2**3
filesz 0x00000a80 memsz 0x000022f8 flags rw-
LOAD off 0x000089f0 vaddr 0x20002438 paddr 0x00008bd8 align 2**0
filesz 0x00000000 memsz 0x00004000 flags rw-
LOAD off 0x000089f0 vaddr 0x20000000 paddr 0x20000000 align 2**0
filesz 0x00000000 memsz 0x00000140 flags rw-
where the segment at paddr 0x8158 has a memsz of 0x2258 and
would overlap with the segment at paddr 0x8bd8 if QEMU's loader
tried to honour it. (At runtime the segments will not overlap
since their vaddrs are more widely spaced than their paddrs.)
Currently if you try to load an ELF file like this with QEMU then
it will fail with an error "rom: requested regions overlap",
because we create a ROM image for each segment using the memsz
as the size.
Support ELF files using this scheme, by truncating the
zero-initialized part of the segment if it would overlap another
segment. This will retain the existing loader behaviour for
all ELF files we currently accept, and also accept ELF files
which only need 'filesz' bytes to be loaded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1502116754-18867-2-git-send-email-peter.maydell@linaro.org
The ARMv7M architecture specifies that most of the addresses in the
PPB region (which includes the NVIC, systick and system registers)
are not accessible to unprivileged accesses, which should
BusFault with a few exceptions:
* the STIR is configurably user-accessible
* the ITM (which we don't implement at all) is always
user-accessible
Implement this by switching the register access functions
to the _with_attrs scheme that lets us distinguish user
mode accesses.
This allows us to pull the handling of the CCR.USERSETMPEND
flag up to the level where we can make it generate a BusFault
as it should for non-permitted accesses.
Note that until the core ARM CPU code implements turning
MEMTX_ERROR into a BusFault the registers will continue to
act as RAZ/WI to user accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-16-git-send-email-peter.maydell@linaro.org
The armv7m_nvic.h header file was accidentally placed in
include/hw/arm; move it to include/hw/intc to match where
its corresponding .c file lives.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-15-git-send-email-peter.maydell@linaro.org
Add a utility function for testing whether the CPU is in Handler
mode; this is just a check whether v7m.exception is non-zero, but
we do it in several places and it makes the code a bit easier
to read to not have to mentally figure out what the test is testing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-14-git-send-email-peter.maydell@linaro.org
Move the code in arm_v7m_cpu_do_interrupt() that calculates the
magic LR value down to when we're actually going to use it.
Having the calculation and use so far apart makes the code
a little harder to understand than it needs to be.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-13-git-send-email-peter.maydell@linaro.org
Make the arm_cpu_dump_state() debug logging handle the M-profile XPSR
rather than assuming it's an A-profile CPSR. On M profile the PSR
line of a register dump will now look like this:
XPSR=41000000 -Z-- T priv-thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-12-git-send-email-peter.maydell@linaro.org
For M profile the XPSR is a similar but not identical format to the
A profile CPSR/SPSR. (For instance the Thumb bit is in a different
place.) For guest accesses we make the M profile code go through
xpsr_read() and xpsr_write() which handle the different layout.
However for migration we use cpsr_read() and cpsr_write() to
marshal state into and out of the migration data stream. This
is pretty confusing and works more by luck than anything else.
Make M profile migration use xpsr_read() and xpsr_write() instead.
The most complicated part of this is handling the possibility
that the migration source is an older QEMU which hands us a
CPSR format value; helpfully we can always tell the two apart.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-11-git-send-email-peter.maydell@linaro.org
We currently store the M profile CPU register state PRIMASK and
FAULTMASK in the daif field of the CPU state in its I and F
bits. This is a legacy from the original implementation, which
tried to share the cpu_exec_interrupt code between A profile
and M profile. We've since separated out the two cases because
they are significantly different, so now there is no common
code between M and A profile which looks at env->daif: all the
uses are either in A-only or M-only code paths. Sharing the state
fields now is just confusing, and will make things awkward
when we implement v8M, where the PRIMASK and FAULTMASK
registers are banked between security states.
Switch M profile over to using v7m.faultmask and v7m.primask
fields for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-10-git-send-email-peter.maydell@linaro.org
The M profile XPSR is almost the same format as the A profile CPSR,
but not quite. Define some XPSR_* macros and use them where we
definitely dealing with an XPSR rather than reusing the CPSR ones.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-9-git-send-email-peter.maydell@linaro.org
When we switched our handling of exception exit to detect
the magic addresses at translate time rather than via
a do_unassigned_access hook, we forgot to update a
comment; correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-8-git-send-email-peter.maydell@linaro.org
Remove the comment that claims that some MPU_CTRL bits are stored
in sctlr_el[1]. This has never been true since MPU_CTRL was added
in commit 29c483a506 -- the comment is a leftover from
Michael Davidsaver's original implementation, which I modified
not to use sctlr_el[1]; I forgot to delete the comment then.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-7-git-send-email-peter.maydell@linaro.org
Remove an out of date comment which says there's only one
item in the NVIC container region -- we put systick into its
own device object a while back and so now there are two
things in the container.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-6-git-send-email-peter.maydell@linaro.org
Tighten up the T32 decoder in the places where new v8M instructions
will be:
* TT/TTT/TTA/TTAT are in what was nominally LDREX/STREX r15, ...
which is UNPREDICTABLE:
make the UNPREDICTABLE behaviour be to UNDEF
* BXNS/BLXNS are distinguished from BX/BLX via the low 3 bits,
which in previous architectural versions are SBZ:
enforce the SBZ via UNDEF rather than ignoring it, and move
the "ARCH(5)" UNDEF case up so we don't leak a TCG temporary
* SG is in the encoding which would be LDRD/STRD with rn = r15;
this is UNPREDICTABLE and we currently UNDEF:
move this check further up the code so that we don't leak
TCG temporaries in the UNDEF case and have a better place
to put the SG decode.
This means that if a v8M binary is accidentally run on v7M
or if a test case hits something that we haven't implemented
yet the behaviour will be obvious (UNDEF) rather than obscure
(plough on treating it as a different instruction).
In the process, add some comments about the instruction patterns
at these points in the decode. Our Thumb and ARM decoders are
very difficult to understand currently, but gradually adding
comments like this should help to clarify what exactly has
been decoded when.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-5-git-send-email-peter.maydell@linaro.org
Currently get_phys_addr() has PMSAv7 handling before the
"is translation disabled?" check, and then PMSAv5 after it.
Tidy this up by making the PMSAv5 code handle the "MPU disabled"
case itself, so that we have all the PMSA code in one place.
This will make adding the PMSAv8 code slightly cleaner, and
also means that pre-v7 PMSA cores benefit from the MPU lookup
logging that the PMSAv7 codepath had.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-4-git-send-email-peter.maydell@linaro.org
M profile cores can never trap on WFI or WFE instructions. Check for
M profile in check_wfx_trap() to ensure this.
The existing code will do the right thing for v7M cores because
the hcr_el2 and scr_el3 registers will be all-zeroes and so we
won't attempt to trap, but when we start setting ARM_FEATURE_V8
for v8M cores the v8A handling of SCTLR.nTWE and .nTWI will not
give the right results.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-3-git-send-email-peter.maydell@linaro.org
In the ARM get_phys_addr() code, switch to using the MMUAccessType
enum and its MMU_* values rather than int and literal 0/1/2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-2-git-send-email-peter.maydell@linaro.org
