With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.
There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:
1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.
2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.
Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.
Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.
Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Is good enougth for unique device addresses and avoids the need for any
state for device addressing. Makes live migration support easier. Also
makes device->slot lookups trivial.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Check for port reset first and skip everything else then.
Add sanity checks for PLS updates.
Add PLC notification when entering PLS_U0 state.
This gets host-initiated port resume going on win8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb-serial has a qdev chardev property, and hw/qdev-properties-system.c
already contains:
static void release_chr(Object *obj, const char *name, void *opaque)
{
DeviceState *dev = DEVICE(obj);
Property *prop = opaque;
CharDriverState **ptr = qdev_get_prop_ptr(dev, prop);
CharDriverState *chr = *ptr;
if (chr) {
qemu_chr_add_handlers(chr, NULL, NULL, NULL, NULL);
qemu_chr_fe_release(chr);
}
}
So doing the qemu_chr_add_handlers(s->cs, NULL, NULL, NULL, NULL); from
the usb handle_destroy function too will lead to it being done twice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Headers in include/exec/ are for the deepest innards of QEMU,
they should almost never be included directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Gerd Hoffmann (7) and Hans de Goede (3)
# Via Gerd Hoffmann
* kraxel/usb.79:
usb-tablet: Don't claim wakeup capability for USB-2 version
usb: update docs for bus name change
usb-hub: report status changes only once
usb-hub: limit chain length
xhci: zap unused name field
xhci: remove unimplemented printfs
xhci: remove leftover debug printf
xhci: fix numintrs sanity checks
usb-redir: Add flow control support
usb-redir: Fix crash on migration with no client connected
usb-storage takes care to fetch the USB serial number from -drive
options, but it neglected to pass its own 'serial' property to the
scsi-disk it creates. With this patch, the 'serial' qdev property and
the 'serial' option in -drive behave the same and correctly apply the
serial number on both USB and SCSI level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Our ehci code does not implement wakeup support, so claiming support for
it with usb-tablet in USB-2 mode causes all tablet events to get lost.
http://bugzilla.redhat.com/show_bug.cgi?id=929068
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If no client is connected on the src side, then we won't receive a
parser during migrate, in this case usbredir_post_load() should be a nop,
rather then to try to derefefence the NULL dev->parser pointer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most frontends can't really determine if the guest actually has the frontend
side open. So lets automatically generate fe_open / fe_close as soon as a
frontend becomes ready (as signalled by calling qemu_chr_add_handlers) /
becomes non ready (as signalled by setting all handlers to NULL).
And allow frontends which can actually determine if the guest is listening to
opt-out of this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-5-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename the opened variable to be_open to reflect that it contains the
opened state of the backend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-2-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix the awkward API of mangling the caller specified PCIe type and
just provide an interface to initialize an endpoint device. This
will pick either a regular endpoint or integrated endpoint based on
the bus and return pcie_cap_init to doing exactly what is asked.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the following compilation error:
hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type
‘long long unsigned int’, but argument 4 has type ‘unsigned int’
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 8550a02d12 added a streams
parameter to usb_wakeup and didn't update redirect.c. Fix it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add streams support to the xhci emulation. No secondary streams yet,
only linear stream arays are supported for now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix the ordering of the endpoint descriptors for superspeed endpoints:
The superspeed companion must come first, possible additional
descriptors for the endpoint after that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_packet_copy can handle combined packets now,
so it isn't needed to special-case them any more.
Also use the new usb_packet_size() function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code handling the "-usbdevice host:..." legacy command line
syntax is moved to the new hw/usb/host-legacy.c file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Leave the core usb devices (usb hub, tablet, mouse, keyboard)
enabled unconditionally. Make the other ones configurable.
Exceptions:
- bluetooth: not qdevified yet, has a vl.c dependency because
of that, thus disabling isn't as easy as not linking the
object file.
- smardcard: ccid-card-emulated depends on that one *and*
CONFIG_SMARTCARD_NSS. So it isn't a one-liner and comes
as separate patch because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basically the same as usb-storage, but without automatic scsi
device setup. Also features support for up to 16 LUNs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit a1cbfd554e.
Test isn't useless. scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
84f2d0ea added an argument to function usb_host_info.
The stub function must match the declaration in usb.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
scsi_req_new() never returns null, and scsi_req_enqueue() dereferences
the pointer, so checking for null is useless.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.76:
usb-host: Initialize dev->port the obviously safe way
usb-host: Drop superfluous null test from usb_host_auto_scan()
ehci: Assert state machine is sane w.r.t. EHCIQueue
xhci: nuke transfe5rs on detach
xhci: call xhci_detach_slot on root port detach too
xhci: create xhci_detach_slot helper function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Coverity worries the strcpy() could overrun the destination. It
can't, because the source always points to usb_host_scan()'s auto
port[], which has the same size. Use pstrcpy() anyway, to hush the
checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity points out that port is later passed to usb_host_open(),
which dereferences it. It actually can't be null: it always points to
usb_host_scan()'s auto port[]. Drop the superfluous port == NULL
test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity worries the EHCIQueue pointer could be null when we pass it
to functions that reference it. The state machine ensures it can't be
null then. Assert that, to hush the checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Buffered bulk mode is intended for bulk *input* endpoints, where the data is
of a streaming nature (not part of a command-response protocol). These
endpoints' input buffer may overflow if data is not read quickly enough.
So in buffered bulk mode the usb-host takes care of the submitting and
re-submitting of bulk transfers.
Buffered bulk mode is necessary for reliable operation with the bulk in
endpoints of usb to serial convertors. Unfortunatelty buffered bulk input
mode will only work with certain devices, therefor this patch also adds a
usb-id table to enable it for devices which need it, while leaving the
bulk ep handling for other devices unmodified.
Note that the bumping of the required usbredir from 0.5.3 to 0.6 does
not mean that we will now need a newer usbredir release then qemu-1.3,
.pc files reporting 0.5.3 have only ever existed in usbredir builds directly
from git, so qemu-1.3 needs the 0.6 release too.
Changes in v2:
-Split of quirk handling into quirks.c
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It uses a different capsbase and opregbase than the Xilinx device.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows specific derived models to use different values.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SysBus EHCI was introduced in a hurry before 1.3 Soft Freeze.
To use QOM casts in place of DO_UPCAST() / FROM_SYSBUS(), we need an
identifying type. Introduce generic abstract base types for PCI and
SysBus EHCI to allow multiple types to access the shared fields.
While at it, move the state structs being amended with macros to the
header file so that they can be embedded.
The VMSTATE_PCI_DEVICE() macro does not play nice with the QOM
parent_obj naming convention, so defer that cleanup.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Due to the way devices are addressed with xhci (done by hardware, not
the guest os) there is no packet when invoking the set-address control
request. Create a dummy packet in that case to avoid null pointer
dereferences.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The xhci-hcd may submit bulk transfers > 65535 bytes even when not using
bulk-in pipeling, so usbredir can only be used in combination with an xhci
hcd if the client has the 32 bits bulk length capability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To ensure that interrupt receiving is properly stopped when the guest is
no longer interested in an interrupt endpoint.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some usb devices (host or network redirection) can benefit from knowing when
the guest stops using an endpoint. Redirection may involve submitting packets
independently from the guest (in combination with a fifo buffer between the
redirection code and the guest), to ensure that buffers of the real usb device
are timely emptied. This is done for example for isoc traffic and for interrupt
input endpoints. But when the (re)submission of packets is done by the device
code, then how does it know when to stop this?
For isoc endpoints this is handled by detecting a set interface (change alt
setting) command, which works well for isoc endpoints. But for interrupt
endpoints currently the redirection code never stops receiving data from
the device, which is less then ideal.
However the controller emulation is aware when a guest looses interest, as
then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint
is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice
method and modifies the hcd code to call this on queue unlink / ep stop.
This makes it possible for the redirection code to properly stop receiving
interrupt input (*) data when the guest no longer has interest in it.
*) And in the future also buffered bulk input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_ep_find_packet_by_id mistakenly only checks the first packet and if that
is not a match, keeps trying the first packet! This patch fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This leads to cleaner code in usb-hid, and removes up to a 1000 calls / sec to
qemu_get_clock_ns(vm_clock) if idle-time is set to its default value of 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If somehow we've gotten behind a lot, simply skip ahead, like the ehci code
does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch uhci would process an unlimited amount of frames when
behind on schedule, by setting the timer to a time already past, causing the
timer subsys to immediately recall the frame_timer function gain.
This would cause invalid cancellations of bulk queues when the catching up
processed more then 32 frames at a moment when the bulk qh was temporarily
unlinked (which the Linux uhci driver does).
This patch fixes this by processing maximum 16 frames in one go, and always
setting the timer one ms later, making the code behave more like the ehci
code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rather then using the magic 32 value in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Re-arrange how we process frames / increase frnum / report pending interrupts,
to avoid a 1 ms delay in interrupt reporting to the guest. This increases
the packet throughput for cases where the guest submits a single packet,
then waits for its completion then re-submits from 500 pkts / sec to
1000 pkts / sec. This impacts for example the use of redirected / virtual
usb to serial convertors.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_raise_irq(s, USBSTS_PCD), gets applied immediately so there is no need
to call commit_irq after it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I tried lowering the time between raising an interrupt and rescanning the
async schedule to see if the guest has queued a new transfer before, but
that did not have any positive effect. I now believe the cause for this is
that lowering this time made it more likely to hit the 1 ms interrupt
threshold penalty for the next packet, as described in my
"ehci: Use uframe precision for interrupt threshold checking" commit.
Now that we do interrupt threshold handling with uframe precision, futher
lowering this time from .5 to .25 ms gives an extra 15% improvement in speed
(MB/s) reading from a simple USB-2.0 thumb-drive.
While at it also properly set the int_req_by_async flag for short packet
completions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch, the following could happen:
1) Transfer completes, raises interrupt
2) .5 ms later we check if the guest has queued up any new transfers
3) We find and execute a new transfer
4) .2 ms later the new transfer completes
5) We re-run our frame_timer to write back the completion, but less then
1 ms has passed since our last run, so frindex is not changed, so the
interrupt threshold code delays the interrupt
6) 1 ms from the re-run our frame-timer runs again and finally delivers
the interrupt
This leads to unnecessary large delays of interrupts, this code fixes this
by changing frindex to uframe precision and using that for interrupt threshold
control, making the interrupt fire at step 5 for guest which have low interrupt
threshold settings (like Linux).
Note that the guest still sees the frindex move in steps of 8 for migration
compatibility.
This boosts Linux read speed of a simple cheap USB thumb drive by 6 %.
Changes in v2:
-Make the guest see frindex move in steps of 8 by modifying ehci_opreg_read,
rather then using a shadow variable
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_fill_queue assumes that there is a one on one relationship between an ep
and a qh, this patch adds a check to ensure this.
Note I don't expect this to ever trigger, this is just something I noticed
the guest might do while working on other stuff. The only way this check can
trigger is if a guest mixes in and out qtd-s in a single qh for a non
control ep.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the short-circuiting of fetchqtd in fetchqh, so that the
qtd gets properly verified before completing the transaction.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is not allowed, except for clearing active on cancellation, so don't
warn when the new token does not have its active bit set.
This unifies the cancellation path for modified qtd-s, and prepares
ehci_verify_qtd to be used ad an extra check inside
ehci_writeback_async_complete_packet().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also drop the warning printf, which was there mainly because this was an
untested code path (as the previous bug fixes to it show), but that no
longer is the case now :)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>