The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of. There are quite a lot of
places where we bend the rules in order to preserve the capitalization of
internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR".
That was a bad idea - it frequently leads to names ending up with hard to
read clusters of capital letters, and means they don't catch the eye as
type identifiers, which is kind of the point of the CamelCase convention in
the first place.
In short, keeping type identifiers look like CamelCase is more important
than preserving standard capitalization of internal "words". So, this
patch renames a heap of spapr internal type names to a more standard
CamelCase.
In addition to case changes, we also make some other identifier renames:
VIOsPAPR* -> SpaprVio*
The reverse word ordering was only ever used to mitigate the capital
cluster, so revert to the natural ordering.
VIOsPAPRVTYDevice -> SpaprVioVty
VIOsPAPRVLANDevice -> SpaprVioVlan
Brevity, since the "Device" didn't add useful information
sPAPRDRConnector -> SpaprDrc
sPAPRDRConnectorClass -> SpaprDrcClass
Brevity, and makes it clearer this is the same thing as a "DRC"
mentioned in many other places in the code
This is 100% a mechanical search-and-replace patch. It will, however,
conflict with essentially any and all outstanding patches touching the
spapr code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190309214255.9952-3-f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The t0 tcg_temp register is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20190309214255.9952-2-f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We now have enough support to boot a PowerNV machine with a POWER9
processor. Allow HV mode on POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190307223548.20516-16-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that all VSX registers are stored in host endian order, there is no need
to go via different accessors depending upon the register number. Instead we
introduce vsr64_offset() and use it directly from within get_cpu_vsr{l,h}() and
set_cpu_vsr{l,h}().
This also allows us to rewrite avr64_offset() and fpr_offset() in terms of the
new vsr64_offset() function to more clearly express the relationship between the
VSX, FPR and VMX registers, and also remove vsrl_offset() which is no longer
required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-8-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When VSX support was initially added, the fpr registers were added at
offset 0 of the VSR register and the vsrl registers were added at offset
1. This is in contrast to the VMX registers (the last 32 VSX registers) which
are stored in host-endian order.
Switch the fpr/vsrl registers so that the lower 32 VSX registers are now also
stored in host endian order to match the VMX registers. This ensures that TCG
vector operations involving mixed VMX and VSX registers will function
correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
By using the VsrD macro in avr64_offset() the same offset calculation can be
used regardless of the host endian. This allows get_avr64() and set_avr64() to
be simplified accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-6-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All TCG vector operations require pointers to the base address of the vector
rather than separate access to the top and bottom 64-bits. Convert the VMX TCG
instructions to use a new avr_full_offset() function instead of avr64_offset()
which can then itself be written as a simple wrapper onto vsr_full_offset().
This same function can also reused in cpu_avr_ptr() to avoid having more than
one copy of the offset calculation logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-5-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It isn't possible to include internal.h from cpu.h so move the Vsr* macros
into cpu.h alongside the other VMX/VSX register access functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20190307180520.13868-4-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of having multiple copies of the offset calculation logic, move it to a
single vsrl_offset() function.
This commit also renames the existing get_vsr()/set_vsr() functions to
get_vsrl()/set_vsrl() which better describes their purpose.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of having multiple copies of the offset calculation logic, move it to a
single fpr_offset() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190307180520.13868-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_CALL H_PAGE_INIT can be used to zero or copy a page of guest
memory. Enable the in-kernel H_PAGE_INIT handler.
The in-kernel handler takes half the time to complete compared to
handling the H_CALL in userspace.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190306060608.19935-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are four scenarios being handled in this function:
- single stepping
- hardware breakpoints
- software breakpoints
- fallback (no debug supported)
A future patch will add code to handle specific single step and
software breakpoints cases so let's split each scenario into its own
function now to avoid hurting readability.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20190228225759.21328-5-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for a refactoring of the kvm_handle_debug
function in the next patch.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20190228225759.21328-4-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate
the requirement for a hw-assisted version of the count cache flush
workaround.
The count cache flush workaround is a software workaround which can be
used to flush the count cache on context switch. Some revisions of
hardware may have a hardware accelerated flush, in which case the
software flush can be shortened. This cap is used to set the
availability of such hardware acceleration for the count cache flush
routine.
The availability of such hardware acceleration is indicated by the
H_CPU_CHAR_BCCTR_FLUSH_ASSIST flag being set in the characteristics
returned from the KVM_PPC_GET_CPU_CHAR ioctl.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190301031912.28809-2-sjitindarsingh@gmail.com>
[dwg: Small style fixes]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_cap SPAPR_CAP_IBS is used to indicate the level of capability
for mitigations for indirect branch speculation. Currently the available
values are broken (default), fixed-ibs (fixed by serialising indirect
branches) and fixed-ccd (fixed by diabling the count cache).
Introduce a new value for this capability denoted workaround, meaning that
software can work around the issue by flushing the count cache on
context switch. This option is available if the hypervisor sets the
H_CPU_BEHAV_FLUSH_COUNT_CACHE flag in the cpu behaviours returned from
the KVM_PPC_GET_CPU_CHAR ioctl.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Message-Id: <20190301031912.28809-1-sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement support to allow KVM guests to take advantage of the large
decrementer introduced on POWER9 cpus.
To determine if the host can support the requested large decrementer
size, we check it matches that specified in the ibm,dec-bits device-tree
property. We also need to enable it in KVM by setting the LPCR_LD bit in
the LPCR. Note that to do this we need to try and set the bit, then read
it back to check the host allowed us to set it, if so we can use it but
if we were unable to set it the host cannot support it and we must not
use the large decrementer.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190301024317.22137-3-sjitindarsingh@gmail.com>
[dwg: Small style fixes]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior to POWER9 the decrementer was a 32-bit register which decremented
with each tick of the timebase. From POWER9 onwards the decrementer can
be set to operate in a mode called large decrementer where it acts as a
n-bit decrementing register which is visible as a 64-bit register, that
is the value of the decrementer is sign extended to 64 bits (where n is
implementation dependant).
The mode in which the decrementer operates is controlled by the LPCR_LD
bit in the logical paritition control register (LPCR).
>From POWER9 onwards the HDEC (hypervisor decrementer) was enlarged to
h-bits, also sign extended to 64 bits (where h is implementation
dependant). Note this isn't configurable and is always enabled.
On POWER9 the large decrementer and hdec are both 56 bits, as
represented by the lrg_decr_bits cpu class property. Since they are the
same size we only add one property for now, which could be extended in
the case they ever differ in the future.
We also add the lrg_decr_bits property for POWER5+/7/8 since it is used
to determine the size of the hdec, which is only generated on the
POWER5+ processor and later. On these processors it is 32 bits.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190301024317.22137-2-sjitindarsingh@gmail.com>
[dwg: Small style fixes]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Intel Processor Trace required CPUID[0x14] but the cpuid_level
have no change when create a kvm guest with
e.g. "-cpu qemu64,+intel-pt".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1548805979-12321-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID code will call kvm_arch_get_supported_cpuid() and, even though
it is undef kvm_enabled() so it never runs for user-mode emulators,
sometimes clang will not optimize it out at -O0.
That could be considered a compiler bug, however at -O0 we give it
a pass and just add the stubs.
Reported-by: Kamil Rytarowski <n54@gmx.com>
Tested-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Combine all variant in a single handler. As source and destination
have different element sizes, we can't use gvec expansion. Expand
manually. Also watch out for overlapping source and destination
registers. Use a safe evaluation order depending on the operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-33-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to VECTOR LOAD WITH LENGTH, just the opposite direction.
Properly probe write access before modifying memory.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-32-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Similar to VECTOR LOAD MULTIPLE, just the opposite direction. Probe
write access first.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-31-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we only store one element, there is nothing to consider regarding
exceptions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-30-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instead of checking e.g. the first access on every touched page, we should
check the actual access, otherwise we might get false positives when Low
Address Protection (LAP) is active. As probe_write() can only deal with
accesses to one page, we have to loop.
Use i64 for the length, although not needed - easier to reuse
TCG temps we already have in the translation functions where this will
be used. Also allow it to be used from other helpers.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-28-david@redhat.com>
[CH: add missing page_check_range()]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Load both elements signed and store them into the two 64 bit elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provide an implementation based on i64 and on real host vectors.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Similar to VECTOR GATHER ELEMENT, but the other direction.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-25-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Like VECTOR REPLICATE, but the element to be replicated comes from an
immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replicate via the special gvec helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-23-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Read the whole input before modifying the destination vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of overlying inputs and outputs by using a temporary vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is a big one. Luckily we only have a limited set of such nasty
instructions.
We'll implement all variants with helpers, except when sources and
the destination don't overlap for VECTOR PACK. Provide different helpers
when the cc is to be modified. We'll return the cc then via env->cc_op.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-20-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We cannot use gvec expansion as source and destination elements are
have different element numbers. So we'll expand using a fancy loop.
Also, we have to take care of overlapping source and destination
registers, therefore use a safe evaluation irder depending on the
operation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can reuse the helper introduced along with VECTOR LOAD TO BLOCK
BOUNDARY. We just have to take care of converting the highest index into
a length.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, just load from to gprs into a single vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to VECTOR LOAD GR FROM VR ELEMENT, just the opposite
direction. Also provide a fast path in case we don't care about the
register content.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Very similar to LOAD COUNT TO BLOCK BOUNDARY, but instead of only
calculating, the actual vector is loaded. Use a temporary vector to
not modify the real vector on exceptions. Initialize that one to zero,
to not leak any data. Provide a fast path if we're loading a full
vector.
As we don't have gvec ool handlers for single vectors, just calculate
the vector address manually.
We can reuse the helper later on for VECTOR LOAD WITH LENGTH. In fact,
we are going to name it "vll" right from the beginning, because that's
a better match.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Try to load the last element first. Access to the first element will
be checked afterwards. This way, we can guarantee that the vector is
not modified before we checked for all possible exceptions. (16 vectors
cannot cross more than two pages)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, zero out the vector before we load the desired element.
Load the element before touching the vector.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
To avoid an helper, we have to do the actual calculation of the element
address (offset in cpu_env + cpu_env) manually. Factor that out into
get_vec_element_ptr_i64(). The same logic will be reused for "VECTOR
LOAD VR ELEMENT FROM GR".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Take care of properly sign-extending the immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fairly easy, load with desired size and store it into the right element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can use tcg_gen_gvec_dup_i64() to carry out the duplication.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When loading from memory, load both elements into temps first before
modifying the target vector
Loading with strange alingment from the end of the address space will
not properly wrap, we can ignore that for now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add gen_gvec_dupi() for handling duplication of immediates, so it can
be reused later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's optimize it for the common cases (setting a vector to zero or all
ones) - courtesy of Richard.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190307121539.12842-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
