We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Only use indirect jumps. Finish weaning away from the
unique alignment requirements for code_gen_buffer.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Weaning off of unique alignment requirements, so allow JAL
to not reach the target. TCG_TMP1 is always available for
use as a scratch because it is clobbered by the subroutine
being called.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Let the compiler decide about inlining.
Remove tcg_out_ext8s and tcg_out_ext16s as unused.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap32 and tcg_out_bswap32s.
Use the flags in the internal uses for loads and stores.
For mips32r2 bswap32 with zero-extension, standardize on
WSBH+ROTR+DEXT. This is the same number of insns as the
previous DSBH+DSHD+DSRL but fits in better with the flags check.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_bswap16 and tcg_out_bswap16s. Use the flags
in the internal uses for loads and stores.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The addrl used to compare with SoftTLB entry should be sign-extended
in common case, and it will cause constant failing in SoftTLB
comparisons for the addrl whose address is over 0x80000000 on the
emulation of 32-bit guest on 64-bit host.
This is an important performance bug fix. Spec2000 gzip rate increase
from ~45 to ~140 on Loongson 3A4000 (MIPS compatible platform).
Signed-off-by: Kele Huang <kele.hwang@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401100457.191458-1-kele.hwang@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:
1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
const_args[TCG_MAX_OP_ARGS] aguments.
This duality causes warnings on GCC 11 and prevents build using
--enable-werror. As second version provides more information,
unify functions prototypes to this variant.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This target was not updated with 7ecd02a06f, and so did
not allow re-compilation with relocation overflow.
Remove reloc_26 and reloc_26_val as unused.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass both rx and rw addresses to tb_target_set_jmp_target.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We must change all targets at once, since all must match
the declaration in tcg.c.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change TCGLabel.u.value_ptr to const, and initialize it with
tcg_splitwx_to_rx. Propagate const through tcg/host/ only
as far as needed to avoid errors from the value_ptr change.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is constant across all thread-local copies of TCGContext,
so we might as well move it out of thread-local storage.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are shortly going to have a split rw/rx jit buffer. Depending
on the host, we need to flush the dcache at the rw data pointer and
flush the icache at the rx code pointer.
For now, the two passed pointers are identical, so there is no
effective change in behaviour.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used for anything, really. All variable
operands must accept registers, and which are indicated by the
set in TCGArgConstraint.regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The union is unused; let "regs" appear in the main structure
without the "u.regs" wrapping.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
