We generally assume that loosening permission restrictions can never
fail. We have seen in the past that this assumption is wrong. This has
led to crashes because we generally pass &error_abort when loosening
permissions.
However, a failure in such a case should actually be handled in quite
the opposite way: It is very much not fatal, so qemu may report it, but
still consider the operation successful. The only realistic problem is
that qemu may then retain permissions and thus locks on images it
actually does not require. But again, that is not fatal.
To implement this behavior, we make all functions that change
permissions and that pass &error_abort to the initiating function
(bdrv_check_perm() or bdrv_child_check_perm()) evaluate the
@loosen_restrictions value introduced in the previous patch. If it is
true and an error did occur, we abort the permission update, discard the
error, and instead report success to the caller.
bdrv_child_try_set_perm() itself does not pass &error_abort, but it is
the only public function to change permissions. As such, callers may
pass &error_abort to it, expecting dropping permission restrictions to
never fail.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch makes three functions report whether the necessary permission
change tightens restrictions or not. These functions are:
- bdrv_check_perm()
- bdrv_check_update_perm()
- bdrv_child_check_perm()
Callers can use this result to decide whether a failure is fatal or not
(see the next patch).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have to start by applying the permission restrictions to new_bs
before we can loosen them on old_bs. See the comment for the
explanation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_top_bs never requests or unshares any permissions. There is no
reason to make this so explicit here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE. Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().
The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary. No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a block node uses bdrv_child_try_set_perm() to change the permission
it takes on its child, the result may be very short-lived. If anything
makes the block layer recalculate the permissions internally, it will
invoke the node driver's .bdrv_child_perm() implementation. The
permission/shared permissions masks that returns will then override the
values previously passed to bdrv_child_try_set_perm().
If drivers want a child edge to have specific values for the
permissions/shared permissions mask, it must return them in
.bdrv_child_perm(). Consequentially, there is no need for them to pass
the same values to bdrv_child_try_set_perm() then: It is better to have
a function that invokes .bdrv_child_perm() and calls
bdrv_child_try_set_perm() with the result. This patch adds such a
function under the name of bdrv_child_refresh_perms().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD. If so, we have to update BDRVRawState.open_flags
accordingly. Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blockdev_mark_auto_del: instead of looking at bs->job let's check all
jobs for references to bs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.
blk_iostatus_reset() has only two callers:
1. blk_attach_dev(). This doesn't have anything to do with jobs and
attaching a new guest device won't solve any problem the job
encountered, so no reason to reset the iostatus for the job.
2. qmp_cont(). This resets the iostatus for everything. We can just
call block_job_iostatus_reset() for all block jobs instead of going
through BlockBackend.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, the "thistime" variable is not reinitialized on every loop
iteration. This leads to tests that do not yield a run time (because
they failed or were skipped) printing the run time of the previous test
that did. Fix that by reinitializing "thistime" for every test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because Travis doesn't allow us to keep files produced during tests
(such as log files), let's print the complete job log to the "console"
in case of job failures.
This is a debugging aid, and given that there's been some timeouts
happening on some tests, we absolutely needs the logs to have a proper
action.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190607152223.9467-2-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 6d7a134da4.
We'll have a better fix, that will show the full avocado job log
only if a test case failed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit 1120827fa1 we accidentally put the
"UNDEF unless FPU has double-precision support" check in
the single-precision VFM function. Put it in the dp
function where it belongs.
Fixes: 1120827fa1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617160130.3207-1-peter.maydell@linaro.org
The -mon pretty=on|off switch of the -mon option applies only to QMP
monitors. It's silently ignored for HMP. Deprecate this combination so
that we can make it an error in future versions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-16-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Monitor.flags contains three different flags: One to distinguish HMP
from QMP; one specific to HMP (MONITOR_USE_READLINE) that is ignored
with QMP; and another one specific to QMP (MONITOR_USE_PRETTY) that is
ignored with HMP.
Split the flags field into three bools and move them to the right
subclass. Flags are still in use for the monitor_init() interface.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-14-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.
What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move HMP infrastructure from monitor/misc.c to monitor/hmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between HMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment reformatted to make checkpatch.pl happy, #include <dirent.h>
moved to fix Windows build, superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Move QMP infrastructure from monitor/misc.c to monitor/qmp.c. This is
code that can be shared for all targets, so compile it only once.
The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between QMP
and the monitor core can be cleaned up later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[monitor_is_qmp() tidied up to make checkpatch.pl happy,
superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before we can split monitor/misc.c, we need to create a header file that
contains the common definitions that will be used by multiple source
files.
For a start, add the type definitions for Monitor, MonitorHMP and
MonitorQMP and their dependencies. We'll add functions as needed when
splitting monitor/misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Header guard symbol tidied up, superfluous #include dropped, FIXME in
hmp_change() resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This renames the type for HMP monitor commands and the tables holding
the commands to make clear that they are related to HMP and to allow
making them public later:
* mon_cmd_t -> HMPCommand (fixing use of a reserved name, too)
* mon_cmds -> hmp_cmds
* info_cmds -> hmp_info_cmds
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[sortcmdlist() cleaned up to make checkpatch.pl happy]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Monitor.cmd_table is initialised to point to mon_cmds and never changed
afterwards. We can remove the indirection and just reference mon_cmds
directly instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-6-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The ReadLineState in Monitor is only used for HMP monitors. Create
MonitorHMP and move it there.
Can't use container_of() in hmp_change(). Cast instead, and mark
FIXME. Will be cleaned up shortly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated, whitespace
tweaked in hmp_change(), commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently, struct Monitor mixes state that is only relevant for HMP,
state that is only relevant for QMP, and some actually shared state.
In particular, a MonitorQMP field is present in the state of any
monitor, even if it's not a QMP monitor and therefore doesn't use the
state.
As a first step towards a clean separation between QMP and HMP, let
MonitorQMP extend Monitor and create a MonitorQMP object only when the
monitor is actually a QMP monitor.
Some places accessed Monitor.qmp unconditionally, even for HMP monitors.
They can't keep doing this now, so during the conversion, they are
either changed to become conditional on monitor_is_qmp() or to assert()
that they always get a QMP monitor.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous variable in monitor_data_destroy() eliminated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Instead of mixing HMP and QMP monitors in the same function, separate
the monitor creation function for both.
While in theory, one could pass both MONITOR_USE_CONTROL and
MONITOR_USE_READLINE before this patch and both flags would do
something, readline support is tightly coupled with HMP: QMP never feeds
its input to readline, and the tab completion function treats the input
as an HMP command. Therefore, this configuration is useless.
After this patch, the QMP path asserts that MONITOR_USE_READLINE is not
set. The HMP path can be used with or without MONITOR_USE_READLINE, like
before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-3-kwolf@redhat.com>
[Zero initialization of Monitor moved from monitor_data_init() to
callers]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 788cf9f8c removed the code for password prompting from the
monitor. Since then, the Monitor fields password_completion_cb and
password_opaque have been unused. Remove them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find()
return mon_fdset->id which is int64_t. Downcasting from int64_t to int
leads to a bug with removing fd from fdset with id >= 2^32.
So, fix return types for these function.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523094433.30297-1-yury-kotov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* fix some minor syntax issues in docs/specs/index.rst
* build and install the 'specs' manual, since it now has some content
* delete the "QEMU compared to other emulators" section of the docs
* Convert "translator internals" docs to RST, move to devel manual
-----BEGIN PGP SIGNATURE-----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=VjFp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-docs-20190617' into staging
docs infrastructure queue:
* fix some minor syntax issues in docs/specs/index.rst
* build and install the 'specs' manual, since it now has some content
* delete the "QEMU compared to other emulators" section of the docs
* Convert "translator internals" docs to RST, move to devel manual
# gpg: Signature made Mon 17 Jun 2019 15:56:07 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-docs-20190617:
docs: Build and install specs manual
docs/specs/index.rst: Fix minor syntax issues
qemu-tech.texi: Remove "QEMU compared to other emulators" section
Convert "translator internals" docs to RST, move to devel manual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now we have some rST format docs in the docs/specs/ manual, we should
actually build and install it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-3-peter.maydell@linaro.org
The docs/specs/index.rst has a couple of minor issues which
we didn't notice because we weren't building the manual:
* the ToC entry for the new PPC XIVE docs points to
a nonexistent file
* the initial comment needs to be marked by '..', not '.',
or it will appear in the output
* the title doesn't match the capitialization used by
the existing interop or devel manuals, and uses
'full-system emulation' rather than the 'system emulation'
that the interop manual title uses
Fix these minor issues before we start trying to build the manual.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-id: 20190610152444.20859-2-peter.maydell@linaro.org
The "QEMU compared to other emulators" section of our documentation
hasn't been updated since 2015 (and parts of the text are even older).
We're clearly not very well placed to track the evolution of a
dozen other emulation projects, and an inaccurate or out of date
comparison doesn't serve anybody, so we're best off just removing
the whole documentation section.
If anybody cares strongly about maintaining a comparison page,
it's probably better to do that on the project's wiki where
we can update it more dynamically.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190607152827.18003-3-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Our user-facing manual currently has a section "translator internals"
which has some high-level information about the design of the
TCG translator. This should really be in our new devel/ manual.
Convert it to RST format and move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190607152827.18003-2-peter.maydell@linaro.org
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* support large kernel images in bootloader (by avoiding
putting the initrd over the top of them)
* correctly disable FPU/DSP in the CPU for the mps2-an521, musca-a boards
* arm_gicv3: Fix decoding of ID register range
* arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
* some code cleanups following on from the VFP decodetree conversion
* Only implement doubles if the FPU supports them
(so we now correctly model Cortex-M4, -M33 as single precision only)
-----BEGIN PGP SIGNATURE-----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=mGBo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190617' into staging
target-arm queue:
* support large kernel images in bootloader (by avoiding
putting the initrd over the top of them)
* correctly disable FPU/DSP in the CPU for the mps2-an521, musca-a boards
* arm_gicv3: Fix decoding of ID register range
* arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
* some code cleanups following on from the VFP decodetree conversion
* Only implement doubles if the FPU supports them
(so we now correctly model Cortex-M4, -M33 as single precision only)
# gpg: Signature made Mon 17 Jun 2019 15:33:01 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190617: (24 commits)
target/arm: Only implement doubles if the FPU supports them
target/arm: Fix typos in trans function prototypes
target/arm: Remove unused cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d
target/arm: Stop using deprecated functions in NEON_2RM_VCVT_F32_F16
target/arm: stop using deprecated functions in NEON_2RM_VCVT_F16_F32
target/arm: Stop using cpu_F0s in Neon VCVT fixed-point ops
target/arm: Stop using cpu_F0s for Neon f32/s32 VCVT
target/arm: Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F
target/arm: Stop using cpu_F0s for NEON_2RM_VCVT[ANPM][US]
target/arm: Stop using cpu_F0s for NEON_2RM_VRINT*
target/arm: Stop using cpu_F0s for NEON_2RM_VNEG_F
target/arm: Stop using cpu_F0s for NEON_2RM_VABS_F
target/arm: Use vfp_expand_imm() for AArch32 VFP VMOV_imm
target/arm: Move vfp_expand_imm() to translate.[ch]
hw/intc/arm_gicv3: GICD_TYPER.SecurityExtn is RAZ if GICD_CTLR.DS == 1
hw/intc/arm_gicv3: Fix decoding of ID register range
hw/arm: Correctly disable FPU/DSP for some ARMSSE-based boards
hw/arm/armv7m: Forward "vfp" and "dsp" properties to CPU
target/arm: Allow M-profile CPUs to disable the DSP extension via CPU property
target/arm: Allow VFP and Neon to be disabled via a CPU property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture permits FPUs which have only single-precision
support, not double-precision; Cortex-M4 and Cortex-M33 are
both like that. Add the necessary checks on the MVFR0 FPDP
field so that we UNDEF any double-precision instructions on
CPUs like this.
Note that even if FPDP==0 the insns like VMOV-to/from-gpreg,
VLDM/VSTM, VLDR/VSTR which take double precision registers
still exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190614104457.24703-3-peter.maydell@linaro.org
In several places cut and paste errors meant we were using the wrong
type for the 'arg' struct in trans_ functions called by the
decodetree decoder, because we were using the _sp version of the
struct in the _dp function. These were harmless, because the two
structs were identical and so decodetree made them typedefs of the
same underlying structure (and we'd have had a compile error if they
were not harmless), but we should clean them up anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190614104457.24703-2-peter.maydell@linaro.org
Remove the now unused TCG globals cpu_F0s, cpu_F0d, cpu_F1s, cpu_F1d.
cpu_M0 is still used by the iwmmxt code, and cpu_V0 and
cpu_V1 are used by both iwmmxt and Neon.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-13-peter.maydell@linaro.org
Remove some old constructns from NEON_2RM_VCVT_F16_F32 code:
* don't use CPU_F0s
* don't use tcg_gen_st_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-12-peter.maydell@linaro.org
Remove some old constructs from NEON_2RM_VCVT_F16_F32 code:
* don't use cpu_F0s
* don't use tcg_gen_ld_f32
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-11-peter.maydell@linaro.org
Stop using cpu_F0s in the Neon VCVT fixed-point operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-10-peter.maydell@linaro.org
Stop using cpu_F0s for the Neon f32/s32 VCVT operations.
Since this is the last user of cpu_F0s in the Neon 2rm-op
loop, we can remove the handling code for it too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-9-peter.maydell@linaro.org
Stop using cpu_F0s for NEON_2RM_VRECPE_F and NEON_2RM_VRSQRTE_F.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-8-peter.maydell@linaro.org
Stop using cpu_F0s for the NEON_2RM_VCVT[ANPM][US] ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-7-peter.maydell@linaro.org
Switch NEON_2RM_VRINT* away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-6-peter.maydell@linaro.org
Switch NEON_2RM_VABS_F away from using cpu_F0s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-5-peter.maydell@linaro.org
Where Neon instructions are floating point operations, we
mostly use the old VFP utility functions like gen_vfp_abs()
which work on the TCG globals cpu_F0s and cpu_F1s. The
Neon for-each-element loop conditionally loads the inputs
into either a plain old TCG temporary for most operations
or into cpu_F0s for float operations, and similarly stores
back either cpu_F0s or the temporary.
Switch NEON_2RM_VABS_F away from using cpu_F0s, and
update neon_2rm_is_float_op() accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190613163917.28589-4-peter.maydell@linaro.org