Commit dabefdd6 removed code that was supposed to try reconnecting
during .realize(), but actually just crashed and had several design
problems.
This adds the feature back without the crash in simple cases while also
fixing some design problems: Reconnection is now only tried if there was
a problem with the connection and not an error related to the content
(which would fail again the same way in the next attempt). Reconnection
is limited to three attempts (four with the initial attempt) so that we
won't end up in an infinite loop if a problem is permanent. If the
backend restarts three times in the very short time window of device
initialisation, we have bigger problems and erroring out is the right
course of action.
In the case that a connection error occurs and we reconnect, the error
message is printed using error_report_err(), but otherwise ignored.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-8-kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is the part that we will want to retry if the connection
is lost during initialisation, so factor it out to keep the following
patch simpler.
The error path for vhost_dev_get_config() forgot disconnecting the
chardev, add this while touching the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-7-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of letting the caller make up a meaningless error message, add
an Error parameter to allow reporting the real error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-5-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, switch to 0/-errno so that different kinds of
errors can be distinguished in the caller.
This involves changing a few more callbacks in VhostOps to return
0/-errno: .vhost_set_owner(), .vhost_get_features() and
.vhost_virtqueue_set_busyloop_timeout(). The implementations of these
functions are trivial as they generally just send a message to the
backend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-4-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-3-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmDZ3eAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV88Zgf/VZd2H9Wm3zUmV8VX
u9IlGuG1GROnMA8w+XakKrjKKuRdE/y3tm9vy1cGtYvekrcrHJcQpjouya6hNhWz
isqStmRDMiSLZ5kPdrnIaJ3+TOmUcp+ZXdxtsW6iZgO/knOeGFxbeZ35kG/6gmvN
AYYegK0vOmCD+Bh9QtlHItDvmCXGQQxWnjlLkRatA0HEoXHLI1r7W3oxCxFF9Hu9
3w/Tvp8rbK7oyVHCVb1ULCTJj4cwl8ZAN/509lUGy9FSZwcLKTi45k0EgAw+yuE8
3HZoON6ZyjvC++cUFJbArJGUEY78QIJWGdtMl1yIJh3V+Jp/shSaKRWSwN7p8kGf
QfVa8Q==
=XV4L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-axp-20210628' into staging
Fixes for NetBSD/alpha:
- Provide a proper PCI-ISA bridge
- Set PCI device IDs correctly
- Pass -nographic flag to PALcode
- Update PALcode to set up the Console Terminal Block
- Honor the Floating-point ENable bit during translate.
# gpg: Signature made Mon 28 Jun 2021 15:34:08 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-axp-20210628:
target/alpha: Honor the FEN bit
pc-bios: Update the palcode-clipper image
hw/alpha: Provide a PCI-ISA bridge device node
hw/alpha: Provide console information to the PALcode at start-up
hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Move initialization of the ISA bus from typhoon_init() to clipper_init();
this apsect of device topology is really associated with the individual
model, not the core logic chipset. typhoon_init() now returns the IRQ
to use for the output of the ISA PIC.
- In clipper_init(), instantiate an i82378 instance, and connect its
PIC output to the ISA IRQ input provided by typhoon_init(). Remove
the explicit instantiations of i8254 and i82374, as these devices
are subsumed by the i82378.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210616141538.25436-1-thorpej@me.com>
[rth: Remove direct dependencies on i82374, i8254, i8259.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Redefine the a2 register passed by Qemu at start-up to also include
some configuration flags, in addition to the CPU count, and define
a flag to mirror the "-nographic" option.
Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210613211549.18094-5-thorpej@me.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we are emulating a Clipper device topology, we need to set the
minimum PCI device ID to 1, as there is no IRQ mapping for a device
at ID 0 (see sys_dp264.c:clipper_map_irq()).
- Add a 'devfn_min' argument to typhoon_init(). Pass that argument
along to pci_register_root_bus().
- In clipper_init(), pass PCI_DEVFN(1, 0) as the minimum PCI device
ID/function.
Signed-off-by: Jason Thorpe <thorpej@me.com>
Message-Id: <20210613211549.18094-3-thorpej@me.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmDUc9oACgkQIeENKd+X
cFQnJQf/YJ1DcCc5HKnJD7dKOO7auWGrjcBydVLZpCKT/sBYO2m4+LcUoCkndJst
z2awR2sL6zgTqkpKTFJzENBKcXf0NOAvGvuvAznPQosvW26NhY20EsWHgRxn79DF
2CvFChD4J/aBZa/JwP7232CebsD2IqKn89gP5u6ldFNH36EGpzBRjFOroXLu98x3
arhr7AoyhTTpxcWkWuLW9YVwqZQ8xKKCVTMuqMC8SRI48FUB5+ndy3pTQqIjdoCg
U0wfJIrmPBakw3ik0nbNd47Lu/yxCQMU/O4M/flSbbC1GpomiUotlap9O3LlvNYo
7VeF8eS3/7Okn2/5jEwuFES+MmtUSQ==
=zVjG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20210624-2' into staging
Third RISC-V PR for 6.1 release
- Fix MISA in the DisasContext
- Fix GDB CSR XML generation
- QOMify the SiFive UART
- Add support for the OpenTitan timer
# gpg: Signature made Thu 24 Jun 2021 13:00:26 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210624-2:
hw/riscv: OpenTitan: Connect the mtime and mtimecmp timer
hw/timer: Initial commit of Ibex Timer
hw/char/ibex_uart: Make the register layout private
hw/char: QOMify sifive_uart
hw/char: Consistent function names for sifive_uart
target/riscv: gdbstub: Fix dynamic CSR XML generation
target/riscv: Use target_ulong for the DisasContext misa
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-11-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of converting -smp to a property with a QAPI type, define
the struct and use it to do the actual parsing. machine_smp_parse
takes care of doing the QemuOpts->QAPI conversion by hand, for now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the smp_parse functions to use Error** instead of exiting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of smp_parse and pc_smp_parse is guarded by an "if (opts)"
conditional, and the rest is common to both function. Move the
conditional and the common code to the caller, machine_smp_parse.
Move the replay_add_blocker call after all errors are checked for.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to make SMP configuration a Machine property, we need a getter as
well as a setter. To simplify the implementation put everything that the
getter needs in the CpuTopology struct.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the '-device help' output from:
Storage devices:
name "floppy", bus floppy-bus, desc "virtual floppy drive"
name "isa-fdc", bus ISA
to:
Storage devices:
name "floppy", bus floppy-bus, desc "virtual floppy drive"
name "isa-fdc", bus ISA, desc "virtual floppy controller"
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-7-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the SysBus code.
Extract the SysBus specific code to a new unit: fdc-sysbus.c,
and add a new Kconfig symbol: "FDC_SYSBUS".
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-6-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some machines use floppy controllers via the SysBus interface,
and don't need to pull in all the ISA code.
Extract the ISA specific code to a new unit: fdc-isa.c, and
add a new Kconfig symbol: "FDC_ISA".
This allows us to remove the FIXME from commit dd0ff8191a
("isa: express SuperIO dependencies with Kconfig").
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-5-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We want to extract ISA/SysBus code from the generic fdc.c file.
First, declare the prototypes we will access from the new units
into a new local header: "fdc-internal.h".
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-3-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
isa_superio_realize() calls isa_fdc_init_drives(), which is defined
in hw/block/fdc.c, so ISA_SUPERIO needs to select the FDC symbol.
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210614193220.2007159-2-philmd@redhat.com
Fixes: c0ff379514 ("Introduce a CONFIG_ISA_SUPERIO switch for isa-superio.c")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.
Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Connect the Ibex timer to the OpenTitan machine. The timer can trigger
the RISC-V MIE interrupt as well as a custom device interrupt.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 5e7f4e9b4537f863bcb8db1264b840b56ef2a929.1624001156.git.alistair.francis@wdc.com
Add support for the Ibex timer. This is used with the RISC-V
mtime/mtimecmp similar to the SiFive CLINT.
We currently don't support changing the prescale or the timervalue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 716fdea2244515ce86a2c46fe69467d013c03147.1624001156.git.alistair.francis@wdc.com
This QOMifies the SiFive UART model. Migration and reset have been
implemented.
Signed-off-by: Lukas Jünger <lukas.juenger@greensocs.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210616092326.59639-3-lukas.juenger@greensocs.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This cleans up function names in the SiFive UART model.
Signed-off-by: Lukas Jünger <lukas.juenger@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210616092326.59639-2-lukas.juenger@greensocs.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The I/O sampling rate range is enforced to 5000 to 45000HZ according to
commit a2cd86a9. Setting I/O sampling rate with command 41h/42h, a guest
user can break this assumption and trigger an assertion in audio_calloc
via command 0xd4. This patch restricts the I/O sampling rate range for
command 41h/42h.
Fixes: 85571bc741 ("audio merge (malc)")
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Message-Id: <1624502687-5214-1-git-send-email-cyruscyliu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
-----BEGIN PGP SIGNATURE-----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=bMQp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210621' into staging
s390x update:
- tcg: implement the vector enhancements facility and bump the
'qemu' cpu model to a stripped-down z14 GA2
- fix psw.mask handling in signals
- fix vfio-ccw sense data handling
# gpg: Signature made Mon 21 Jun 2021 10:53:00 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20210621: (37 commits)
s390x/css: Add passthrough IRB
s390x/css: Refactor IRB construction
s390x/css: Split out the IRB sense data
s390x/css: Introduce an ESW struct
linux-user/s390x: Save and restore psw.mask properly
target/s390x: Use s390_cpu_{set_psw, get_psw_mask} in gdbstub
target/s390x: Improve s390_cpu_dump_state vs cc_op
target/s390x: Do not modify cpu state in s390_cpu_get_psw_mask
target/s390x: Expose load_psw and get_psw_mask to cpu.h
configure: Check whether we can compile the s390-ccw bios with -msoft-float
s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2
s390x/tcg: We support Vector enhancements facility
linux-user: elf: s390x: Prepare for Vector enhancements facility
s390x/tcg: Implement VECTOR FP (MAXIMUM|MINIMUM)
s390x/tcg: Implement VECTOR FP NEGATIVE MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP MULTIPLY AND (ADD|SUBTRACT)
s390x/tcg: Implement 32/128 bit for VECTOR FP TEST DATA CLASS IMMEDIATE
s390x/tcg: Implement 32/128 bit for VECTOR FP PERFORM SIGN OPERATION
s390x/tcg: Implement 128 bit for VECTOR FP LOAD ROUNDED
s390x/tcg: Implement 64 bit for VECTOR FP LOAD LENGTHENED
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow code elsewhere in the system to check whether the ACPI GHES
table is present, so it can determine whether it is OK to try to
record an error by calling acpi_ghes_record_errors().
(We don't need to migrate the new 'present' field in AcpiGhesState,
because it is set once at system initialization and doesn't change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-3-peter.maydell@linaro.org
Generic code in target/arm wants to call acpi_ghes_record_errors();
provide a stub version so that we don't fail to link when
CONFIG_ACPI_APEI is not set. This requires us to add a new
ghes-stub.c file to contain it and the meson.build mechanics
to use it when appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-2-peter.maydell@linaro.org
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----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=YWGX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost-gl/tags/x86-next-pull-request' into staging
x86 queue, 2021-06-18
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
# gpg: Signature made Fri 18 Jun 2021 20:51:26 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost-gl/tags/x86-next-pull-request:
scripts: helper to generate x86_64 CPU ABI compat info
docs: add a table showing x86-64 ABI compatibility levels
docs/interop/firmware.json: Add SEV-ES support
docs: Add SEV-ES documentation to amd-memory-encryption.txt
doc: Fix some mistakes in the SEV documentation
i386: Add ratelimit for bus locks acquired in guest
Update Linux headers to 5.13-rc4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, all subchannel types have "sense data" copied into
the IRB.ECW space, and a couple flags enabled in the IRB.SCSW
and IRB.ESW. But for passthrough (vfio-ccw) subchannels,
this data isn't populated in the first place, so enabling
those flags leads to unexpected behavior if the guest tries to
process the sense data (zeros) in the IRB.ECW.
Let's add a subchannel callback that builds these portions of
the IRB, and move the existing code into a routine for those
virtual subchannels. The passthrough subchannels will be able
to piggy-back onto this later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move this logic into its own routine,
so it can be reused later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210617232537.1337506-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Interrupt Response Block is comprised of several other
structures concatenated together, but only the 12-byte
Subchannel-Status Word (SCSW) is defined as a proper struct.
Everything else is a simple array of 32-bit words.
Let's define a proper struct for the 20-byte Extended-Status
Word (ESW) so that we can make good decisions about the sense
data that would go into the ECW area for virtual vs
passthrough devices.
[CH: adapted ESW definition to build with mingw, as discussed]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
TCG implements everything we need to run basic z14 OS+software.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Set _SAVING flag for device state from vmstate change handler when it
gets called from savevm.
Currently State transition savevm/suspend is seen as:
_RUNNING -> _STOP -> Stop-and-copy -> _STOP
State transition savevm/suspend should be:
_RUNNING -> Stop-and-copy -> _STOP
State transition from _RUNNING to _STOP occurs from
vfio_vmstate_change() where when vmstate changes from running to
!running, _RUNNING flag is reset but at the same time when
vfio_vmstate_change() is called for RUN_STATE_SAVE_VM, _SAVING bit
should be set.
Reported by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Message-Id: <1623177441-27496-1-git-send-email-kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the vfio_migration_init(), the SaveVMHandler is registered for
VFIO device. But it lacks the operation of 'unregister'. It will
lead to 'Segmentation fault (core dumped)' in
qemu_savevm_state_setup(), if performing live migration after a
VFIO device is hot deleted.
Fixes: 7c2f5f75f9 (vfio: Register SaveVMHandlers for VFIO device)
Reported-by: Qixin Gan <ganqixin@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Message-Id: <20210527123101.289-1-jiangkunkun@huawei.com>
Reviewed by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
