Use the in kernel GIC model when running with KVM enabled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Delay the realization of the GIC until after CPUs are
realized. This is needed for KVM as the in-kernel GIC
model will fail if it is realized with no available CPUs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.
Make the RPU optional by adding a has_rpu property and
default to having it disabled.
This changes the default setup from having the RPU to not
longer having it.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.
Default to disabled to match the behavior of KVM.
This changes the default setup from having the ARM Security
Extensions to not longer having them.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.
On the TODO list, we also have :
- improve and harden the state machine.
- bus recovery support (used by the Linux driver).
- transfer mode state machine bits. this is not strictly necessary as
it is mostly used for debug. The bus busy bit is deducted from the
I2C core engine of qemu.
- support of the pool buffer: 2048 bytes of internal SRAM (not used
by the Linux driver).
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
aspeed_i2c_bus_set_state()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the MMIO range limit field to 'base + size - 1' as required.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some incorrect code from arm_cpu_do_interrupt_aarch64()
which attempts to set the IL bit in the syndrome register based
on the value of env->thumb. This is wrong in several ways:
* IL doesn't indicate Thumb-vs-ARM, it indicates instruction
length (which may be 16 or 32 for Thumb and is always 32 for ARM)
* not every syndrome format uses IL like this -- for some IL is
always set, and for some it is always clear
* the code is changing esr_el[new_el] even for interrupt entry,
which is not supposed to modify ESR_ELx at all
Delete the code, and instead rely on the syndrome value in
env->exception.syndrome having already been set up with the
correct value of IL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org
For some exception syndrome types, the IL bit should always be set.
This includes the instruction abort, watchpoint and software step
syndrome types; add the missing ARM_EL_IL bit to the syndrome
values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org
Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.
We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.
Based on a suggestion from Peter Maydell.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the Hypervisor System Trap Register for EL2.
This register is used early in the Linux boot and without it the kernel
aborts with a "Synchronous Abort" error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldVR/QACgkQAvw66wEB28JwVQCgiTy4bpShd9GiFgJ+eoSgJnt5
lLcAn3rnv44g0SpW5M7aK4I8RzyEig0X
=vbbR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
readdir_r() to readdir() conversion, various minor cleanups
# gpg: Signature made Mon 06 Jun 2016 10:52:52 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9p: switch back to readdir()
9p: add locking to V9fsDir
9p: introduce the V9fsDir type
9p: drop useless out: label
9p: drop useless inclusion of hw/i386/pc.h
9p/fsdev: remove obsolete references to virtio
9p: some more cleanup in #include directives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit fcaafb1001 accidentally broke reads from
scsi-disk devices when being updated from its original form to use the new
byte-based block functions. Add the extra missing sector to offset conversion
in order to restore read functionality.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While waiting for a gdb response, or while sending an acknowledgement
there is not much to do, so do not mark the socket as non-blocking to
avoid a busy loop while paused at gdb. This only affects the user-mode
emulation (qemu-arm -g 1234 ./a.out).
Note that this issue was reported before at
https://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg02277.html.
While at it, close the gdb client fd on EOF or error while reading.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch changes the 9p code to use readdir() again instead of
readdir_r(), which is deprecated in glibc 2.24.
All the locking was put in place by a previous patch.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
If several threads concurrently call readdir() with the same directory
stream pointer, it is possible that they all get a pointer to the same
dirent structure, whose content is overwritten each time readdir() is
called.
We must thus serialize accesses to the dirent structure.
This may be achieved with a mutex like below:
lock_mutex();
readdir();
// work with the dirent
unlock_mutex();
This patch adds all the locking, to prepare the switch to readdir().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
If we are to switch back to readdir(), we need a more complex type than
DIR * to be able to serialize concurrent accesses to the directory stream.
This patch introduces a placeholder type and fixes all users.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Most of the 9p code is now virtio agnostic. This patch does a final cleanup:
- drop references to Virtio from the header comments
- fix includes
Also drop a couple of leading empty lines while here.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The "9p-attr.h" header isn't needed by 9p synth and virtio 9p.
While here, also drop last references to virtio from 9p synth since it is
now transport agnostic code.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
This patch fixes used-uninitialized false
positive while compiling with ust tracing
backend plus gcc 4.6.3:
hw/net/e1000e.c: In function ‘e1000e_io_write’:
hw/net/e1000e.c:170:39: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
hw/net/e1000e.c: In function ‘e1000e_io_read’:
hw/net/e1000e.c:145:35: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/net/e1000e.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 1465023763-10773-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Store some additional state for cursor and resource backing storage,
so we can write out and reload things. Implement vmsave+vmload for
2d mode. Continue blocking live migration in 3d/virgl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464009727-7753-1-git-send-email-kraxel@redhat.com
vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off. So we can simply exit the loop,
without having to worry about how processing will continue.
Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com
The fifo is normal ram. So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization. Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us. So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com
Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write). Which doesn't help much if the guest
changes the fifo registers afterwards. Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com
The arm target was handled by 06486077, but other targets
were ignored. This handles all the rest which actually support
disassembly (that is, skipping moxie and tilegx).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
ust trace backend has limitation of maximum 10
arguments per event. Traces with more arguments
cannot be compiled for this backend.
Trace e1000e_rx_rss_ip6 introduced by previous
commits has 11 arguments and fails to compile with
ust trace backend.
This patch fixes the problem by splitting this
tracepoint into two successive tracepoints with
smaller number of arguments.
For more information see comment regarding TP_ARGS
in lttng/tracepoint.h:
/*
* TP_ARGS takes tuples of type, argument separated by a comma.
* It can take up to 10 tuples (which means that less than 10 tuples is
* fine too).
* Each tuple is also separated by a comma.
*/
Build log generated by this problem:
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/oslib-posix.c:36:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/oslib-posix.c:36:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/oslib-posix.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/hbitmap.c:16:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/hbitmap.c:16:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/hbitmap.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Message-id: 1464894748-27803-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Drop the old SysBus init function and use instance_init
* Move AUD_open_in / AUD_open_out function into realize stage
Acked-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-5-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Drop the old SysBus init function and use instance_init
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-2-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit "ca58b45 ui/virtio-gpu: add and use qemu_create_displaysurface_pixman"
breaks scanouts which use a region of the underlying resource only.
So, we need another way to handle the underlying issue. Lets create a
new pixman image, grab a reference on the pixman providing the
underlying storage, hook up a destroy callback which releases the
reference. That way regions work again and releasing the backing
storage should still be impossible thanks to the extra reference we are
holding.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1464597655-26341-1-git-send-email-kraxel@redhat.com
Limits the rate kbd events from the vnc server are forwarded to the
guest, so input devices which are typically low-bandwidth can keep
up even on bulky input.
v2: update documentation too.
v3: spell fixes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Yang Hongyang <hongyang.yang@easystack.cn>
Message-id: 1464762150-25817-1-git-send-email-kraxel@redhat.com
Our current VNC code does not handle color maps (aka non-true-color) at all
and aborts if a client requests them. There are 2 major issues with this:
1) A VNC viewer on an 8-bit X11 system may request color maps
2) RealVNC _always_ starts requesting color maps, then moves on to full color
In order to support these 2 use cases, let's just create a fake color map
that covers exactly our normal true color 8 bit color space. That way we don't
lose anything over a client that wants true color.
Reported-by: Sascha Wehnert <swehnert@suse.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1464099559-20789-1-git-send-email-den@openvz.org
Actually this is a very old patch originally submitted in 2013 by
Alexander. The situation is still the same with RealVNC, it does not
connect by default to QEMU VNC. The problem is that this client is
really popular. This is better to be kludged.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support of b8g8r8x8 pixel format for SDL2.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20160517072848.4540.34695.stgit@PASHA-ISP
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The user explicitly requested spice GL, so if we know it isn't
going to work we should exit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: e3789e35b16f9e3cc6f2652f91c52d88ba6d6936.1463588606.git.crobinso@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXT9DWAAoJEO8Ells5jWIRgFAH/1ZDXm8V523AMDOEvBAWgqur
Dj8ZaIwFkqJp7xtLdhS0yKF3xW+vtgx9k+Qftk0S8qEiFKPbThR8iB5VNuesErwd
AZhWo4bnVhKwtWyMw3BDRDK1N4huAWPMZEva1xovR/Cc9v5IG5mx57/K3Zz5C8ec
Jsn4DsLKN0q7W0D0dlnbEOkSjl6iKJchvfPCR6UfvrU7BxfXaCZ9Z7Sfh8ec6tfr
iMgcV9u3A3Zs72gTM9/jdKx8vOrWtdKJufJ8s2Bctc7CyfBNWwnV8PjndhEe3Xvs
vlYeJopdpDPsdMkMtYD6cevtEgvD5yhOBndJ7et807jjuCvUf837tMhodKkFk9M=
=SjIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (31 commits)
Add ENET device to i.MX6 SOC.
Add ENET/Gbps Ethernet support to FEC device
i.MX: move FEC device to a register array structure.
i.MX: Rename i.MX FEC defines to ENET_XXX
i.MX: reset TX/RX descriptors when FEC is disabled.
i.MX: Fix FEC code for ECR register reset value.
i.MX: Fix FEC code for MDIO address selection
i.MX: Fix FEC code for MDIO operation selection
net: handle optional VLAN header in checksum computation.
net: improve UDP/TCP checksum computation.
e1000e: Introduce qtest for e1000e device
net: Introduce e1000e device emulation
e1000: Move out code that will be reused in e1000e
e1000_regs: Add definitions for Intel 82574-specific bits
vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
net_pkt: Extend packet abstraction as required by e1000e functionality
rtl8139: Move more TCP definitions to common header
net_pkt: Name vmxnet3 packet abstractions more generic
vmxnet3: Use common MAC address tracing macros
net: Add macros for MAC address tracing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various temp dir/file changes.
Don't use "find -executable" to be compatible with Mac.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXTqs5AAoJEMo1YkxqkXHGhRkIAIjmtKdjKaR2KkdqeziD/enB
FCY5Kvm90UvZxpEmQuA0SXyOuxP3gRPSTG5XU96tNqd40fbhkWTaLzo6PjyS3d/P
6GzEsi4R6zu4q664z7akwvY2Q6mpph5iPtSc9PIrWv2GB4h3j4Hwps/X67smaME0
zstaU8A+LhxNFMS7x0TBNXwy56NmAirOrdIWdKwx+RQBGYDdC10FtrMbgLh3G0So
oZM5MSqAAeieN6QEzQM8QFEmmiJgDhnwi7TM82tUgqTrww4QVZnhMYaZzope0ias
tA1LvbkfMXIH4NtBJET5ZMlr/fxrvfDVcxDUOUgLzi35h1tjLd56d7hFzAJd27E=
=hPhl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/pull-docker-20160601' into staging
v2: Fix warning due to include.
Various temp dir/file changes.
Don't use "find -executable" to be compatible with Mac.
# gpg: Signature made Wed 01 Jun 2016 10:30:33 BST using RSA key ID 6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/pull-docker-20160601:
.gitignore: Ignore docker source copy
MAINTAINERS: Add tests/docker
docker: Add EXTRA_CONFIGURE_OPTS
docs: Add text for tests/docker in build-system.txt
docker: Add travis tool
docker: Add mingw test
docker: Add clang test
docker: Add full test
docker: Add quick test
docker: Add common.rc
docker: Add test runner
docker: Add images
Makefile: Rules for docker testing
Makefile: Always include rules.mak
rules.mak: Add "COMMA" constant
tests: Add utilities for docker testing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the ENET device to the i.MX6 SOC.
This was tested by booting Linux on an Qemu i.MX6 instance and accessing
the internet from the linux guest.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>