Start moving the initial state of the current request to IDEBus, so that
AHCI can use it. The set_unit callback is not used anymore once this is
done.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With restarts now handled by ide_restart_cb and
the IDEDMAOps.restart_dma() member, remove the old
restart_cb callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With BMDMA specific excised from the restart functions,
create a HBA-agnostic restart callback to be shared
between the different HBAs.
Change the callback registered with the vmstate_change
handler to always point to ide_restart_cb instead of
relying on the IDEDMAOps.restart_cb() member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass the containing IDEBus to the restart_cb instead
of the more specific BMDMAState child.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Whenever an error stops the VM, ide_handle_rw_error does
"s->bus->dma->unit = s->unit". So we can just use
idebus_active_if.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A helper is added that registers the IDEDMAOp .restart_cb()
via qemu_add_vm_change_state_handler instead of requiring
each HBA to register the callback themselves.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the restart_dma callback and adjusts
the ide_restart_dma function to utilize this callback
to call the BMDMA-specific restart code instead of statically
executing BMDMA-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch begins refactoring the restart dma functions
out of bmdma to be shared with AHCI and other future
IDE HBA implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
geometry: hd_geometry_guess function autodetects the drive geometry.
This patch adds a block backend call, that probes the backing device
geometry. If the inner driver method is implemented and succeeds
(currently only for DASDs), the blkconf_geometry will pass-through
the backing device geometry. Otherwise will fallback to old logic.
blocksize: This patch initializes blocksize properties to 0.
In order to set the property a blkconf_blocksizes was introduced.
If user didn't set physical or logical blocksize, it will
retrieve its value from a driver (only succeeds for DASD), otherwise
it will set default 512 value.
The blkconf_blocksizes call was added to all users of BlkConf.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-6-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit 1dc936aa84 (virtio-blk: Use blk_aio_ioctl) we silently lose
the request if blk_aio_ioctl returns NULL (not implemented).
Fix it by directly returning VIRTIO_BLK_S_UNSUPP as we used to do.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ kwolf: Fixed build error on win32 ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* remotes/qmp-unstable/queue/qmp:
docs: add memory-hotplug.txt
qemu-options.hx: improve -m description
virtio-balloon: Add some trace events
virtio-balloon: Fix balloon not working correctly when hotplug memory
pc-dimm: add a function to calculate VM's current RAM size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5gJq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/spice/tags/pull-spice-20150304-1' into staging
misc spice/qxl fixes.
# gpg: Signature made Wed Mar 4 13:57:42 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/spice/tags/pull-spice-20150304-1:
hmp: info spice: take out webdav
hmp: info spice: Show string channel name
qxl: drop update_displaychangelistener call for secondary qxl devices
vga: refactor vram_size clamping and rounding
qxl: refactor rounding up to a nearest power of 2
spice: fix invalid memory access to vga.vram
qxl: document minimal video memory for new modes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=+CKl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150303-1' into staging
xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
# gpg: Signature made Tue Mar 3 07:38:43 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20150303-1:
xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ignore writes to unassigned areas of system I/O regison and return 0 for
reads. This makes drivers for unimportant unimplemented hardware blocks
happy.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When do memory balloon, it takes the 'ram_size' as the VM's current ram size,
But 'ram_size' is the startup configured ram size, it does not take into
account the hotplugged memory.
As a result, the balloon result will be confused.
Steps to reproduce:
(1)Start VM: qemu -m size=1024,slots=4,maxmem=8G
(2)In VM: #free -m : 1024M
(3)qmp balloon 512M
(4)In VM: #free -m : 512M
(5)hotplug pc-dimm 1G
(6)In VM: #free -m : 1512M
(7)qmp balloon 256M
(8)In VM: #free -m :1256M
We expect the VM's available ram size to be 256M after 'qmp balloon 256M'
command, but VM's real available ram size is 1256M.
For "qmp balloon" is not performance critical code, we use function
'get_current_ram_size' to get VM's current ram size.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The global parameter 'ram_size' does not take into account
the hotplugged memory.
In some codes, we use 'ram_size' as current VM's real RAM size,
which is not correct.
Add function 'get_current_ram_size' to calculate VM's current RAM size,
it will enumerate present memory devices and also plus ram_size.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU9DRyAAoJEL/70l94x66D5ZkH/2SPp4rrLIgotyzHTIaMvi+2
0gB7Bks9cDisFyiSgr6dqLp9CV1XMlv/NZl+z+H/7og96qhBWjAKVpG1J/En55bS
vanFeWGYjINuQLnhC3pqBi2kmEkzBQSIMJZt9WnDydfQj/6Wgcr6iabOpd8eTjTz
rqE/UcV2L1baFPLy/Wky2vg/a5Ug2rj+fqvjRdFB/Zx8yDYLcKYJlI8utSQexamE
tUcxr/AqxNOoe6WZD7CCVNmHMHvajoOhWnVY4EgHDg8L3nNSgvDF3AjYfntU6A2y
HjkS0ktvQK666oNo+ORRBzLe3s9nCfB1dMK2ZiKKyFfyuYD50d2N3oHKSAIsEJo=
=AQjO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- more config options
- bootdevice, iscsi, virtio-scsi fixes
- build system patches for MinGW and config-devices.mak
- qemu_mutex_lock_iothread deadlock fixes
- another tiny patch from the record/replay series
# gpg: Signature made Mon Mar 2 09:59:14 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
cpus: be more paranoid in avoiding deadlocks
cpus: fix deadlock and segfault in qemu_mutex_lock_iothread
virtio-scsi: Allocate op blocker reason before blocking
Makefile.target: binary depends on config-devices
Makefile: don't silence mak file test with V=1
Makefile: fix up parallel building under MSYS+MinGW
iscsi: Handle write protected case in reopen
Give ivshmem its own config option
Create specific config option for "platform-bus"
Add specific config options for PCI-E bridges
bootdevice: fix segment fault when booting guest with '-kernel' and '-initrd'
timer: replace time() with QEMU_CLOCK_HOST
virtio-scsi-dataplane: Call blk_set_aio_context within BQL
block: Forbid bdrv_set_aio_context outside BQL
scsi: give device a parent before setting properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment, when the XHCI driver in edk2
(MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf) runs on QEMU, with the options
-device nec-usb-xhci -device usb-kbd
it crashes with:
ASSERT MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c(1759):
TrsRing != ((void*) 0)
The crash hits in the following edk2 call sequence (all files under
MdeModulePkg/Bus/):
UsbEnumerateNewDev() [Usb/UsbBusDxe/UsbEnumer.c]
UsbBuildDescTable() [Usb/UsbBusDxe/UsbDesc.c]
UsbGetDevDesc() [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlGetDesc(USB_REQ_GET_DESCRIPTOR) [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlRequest() [Usb/UsbBusDxe/UsbDesc.c]
UsbHcControlTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcControlTransfer() [Pci/XhciDxe/Xhci.c]
XhcCreateUrb() [Pci/XhciDxe/XhciSched.c]
XhcCreateTransferTrb() [Pci/XhciDxe/XhciSched.c]
XhcExecTransfer() [Pci/XhciDxe/XhciSched.c]
XhcCheckUrbResult() [Pci/XhciDxe/XhciSched.c]
//
// look for TRB_TYPE_DATA_STAGE event [1]
//
//
// Store a copy of the device descriptor, as the hub device
// needs this info to configure endpoint. [2]
//
UsbSetConfig() [Usb/UsbBusDxe/UsbDesc.c]
UsbCtrlRequest(USB_REQ_SET_CONFIG) [Usb/UsbBusDxe/UsbDesc.c]
UsbHcControlTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcControlTransfer() [Pci/XhciDxe/Xhci.c]
XhcSetConfigCmd() [Pci/XhciDxe/XhciSched.c]
XhcInitializeEndpointContext() [Pci/XhciDxe/XhciSched.c]
//
// allocate transfer ring for the endpoint [3]
//
USBKeyboardDriverBindingStart() [Usb/UsbKbDxe/EfiKey.c]
UsbIoAsyncInterruptTransfer() [Usb/UsbBusDxe/UsbBus.c]
UsbHcAsyncInterruptTransfer() [Usb/UsbBusDxe/UsbUtility.c]
XhcAsyncInterruptTransfer() [Pci/XhciDxe/Xhci.c]
XhcCreateUrb() [Pci/XhciDxe/Xhci.c]
XhcCreateTransferTrb() [Pci/XhciDxe/XhciSched.c]
XhcSyncTrsRing() [Pci/XhciDxe/XhciSched.c]
ASSERT (TrsRing != NULL) [4]
UsbEnumerateNewDev() in the USB bus driver issues a GET_DESCRIPTOR
request, in order to determine the number of configurations that the
endpoint supports. The requests consists of three stages (three TRBs),
setup, data, and status. The length of the response is determined in [1],
namely from the transfer event that the host controller generates in
response to the request's middle stage (ie. the data stage).
If the length of the answer is correct (a full GET_DESCRIPTOR request
takes 18 bytes), then the XHCI driver that underlies the USB bus driver
"snoops" (caches) the descriptor data for later [2].
Later, the USB bus driver sends a SET_CONFIG request. The underlying XHCI
driver allocates a transfer ring for the endpoint, relying on the data
snooped and cached in step [2].
Finally, the USB keyboard driver submits an asynchronous interrupt
transfer to manage the keyboard. As part of this it asserts [4] that the
ring has been allocated in step [3].
And this ASSERT() fires. The root cause can be found in the way QEMU
handles the initial GET_DESCRIPTOR request.
Again, that request consists of three stages (TRBs, Transfer Request
Blocks), "setup", "data", and "status". The XhcCreateTransferTrb()
function sets the IOC ("Interrupt on Completion") flag in each of these
TRBs.
According to the XHCI specification, the host controller shall generate a
Transfer Event in response to *each* individual TRB of the request that
had the IOC flag set. This means that QEMU should queue three events:
setup, data, and status, for edk2's XHCI driver.
However, QEMU only generates two events:
- one for the setup (ie. 1st) stage,
- another for the status (ie. 3rd) stage.
No event is generated for the middle (ie. data) stage. The loop in QEMU's
xhci_xfer_report() function runs three times, but due to the "reported"
variable, only the first and the last TRBs elicit events, the middle (data
stage) results in no event queued.
As a consequence:
- When handling the GET_DESCRIPTOR request, XhcCheckUrbResult() in [1]
does not update the response length from zero.
- XhcControlTransfer() thinks that the response is invalid (it has zero
length payload instead of 18 bytes), hence [2] is not reached; the
device descriptor is not stashed for later, and the number of possible
configurations is left at zero.
- When handling the SET_CONFIG request, (NumConfigurations == 0) from
above prevents the allocation of the endpoint's transfer ring.
- When the keyboard driver tries to use the endpoint, the ASSERT() blows
up.
The solution is to correct the emulation in QEMU, and to generate a
transfer event whenever IOC is set in a TRB.
The patch replaces
!reported && (IOC || foo) == !reported && IOC ||
!reported && foo
with
IOC || (!reported && foo) == IOC ||
!reported && foo
which only changes how
reported && IOC
is handled. (Namely, it now generates an event.)
Tested with edk2 built for "qemu-system-aarch64 -M virt" (ie.
"ArmVirtualizationQemu.dsc", aka "AAVMF"), and guest Linux.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 3dcadce507 added three
update_displaychangelistener call sites:
Two for primary qxl cards, when entering/leaving vga mode, which are
correct.
One for secondary qxl cards, which is wrong because we don't register
a displaychangelistener in the first place for secondary cards.
Remove it.
Reported-by: Brad Campbell <lists2009@fnarfbargle.com>
Tested-by: Brad Campbell <lists2009@fnarfbargle.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the code a bit more obvious.
We don't have min/max, so a general helper for clamp probably isn't
acceptable either.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We already have pow2floor, mirror it and use instead of a function with
similar results (same in used domain), to clarify our intent.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga_common_init() doesn't allow more than 256 MiB vram size and silently
shrinks any larger value. qxl_dirty_surfaces() used the unshrinked size
via qxl->shadow_rom.surface0_area_size when accessing the memory, which
resulted in segfault.
Add a workaround for this case and an assert if it happens again.
We have to bump the vga memory limit too, because 256 MiB wouldn't have
allowed 8k (it requires more than 128 MiB).
1024 MiB doesn't work, but 512 MiB seems fine.
Proposed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0lJo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-26' into staging
QemuOpts: Convert various setters to Error
# gpg: Signature made Thu Feb 26 13:56:43 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-02-26:
qtest: Use qemu_opt_set() instead of qemu_opts_parse()
pc: Use qemu_opt_set() instead of qemu_opts_parse()
qemu-sockets: Simplify setting numeric and boolean options
block: Simplify setting numeric options
qemu-img: Suppress unhelpful extra errors in convert, amend
QemuOpts: Propagate errors through opts_parse()
QemuOpts: Propagate errors through opts_do_parse()
QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
block: Suppress unhelpful extra errors in bdrv_img_create()
qemu-img: Suppress unhelpful extra errors in convert, resize
QemuOpts: Convert qemu_opts_set() to Error, fix its use
QemuOpts: Convert qemu_opt_set_number() to Error, fix its use
QemuOpts: Convert qemu_opt_set_bool() to Error, fix its use
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux v4.0-rc1 vfio-pci introduced a new virtual interrupt to allow
the kernel to request a device from the user. When signaled, QEMU
will by default attmempt to hot-unplug the device. This is a one-
shot attempt with the expectation that the kernel will continue to
poll for the device if it is not returned. Returning the device when
requested is the expected standard model of cooperative usage, but we
also add an option option to disable this feature. Initially this
opt-out is set as an experimental option because we really should
honor kernel requests for the device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Disabling MMAP support uses the slower read/write accesses but allows to
trace all MMIO accesses, which is not good for performance, but very
useful for reverse engineering PCI drivers. This option allows to
disable MMAP per device without a compile-time change.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
They are not used from anywhere but common.c which is where these are
defined so make them static.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This makes the error report more informative.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Version: GnuPG v1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=+Vbk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Move APIC ID compatibility code to pc.c
target-i386: Require APIC ID to be explicitly set before CPU realize
target-i386: Set APIC ID using cpu_index on CONFIG_USER
linux-user: Check for cpu_init() errors
target-i386: Move CPUX86State.cpuid_apic_id to X86CPU.apic_id
target-i386: Simplify error handling on cpu_x86_init_user()
target-i386: Eliminate cpu_init() function
target-i386: Rename cpu_x86_init() to cpu_x86_init_user()
target-i386: Move topology.h to include/hw/i386
target-i386: Eliminate unnecessary get_cpuid_vendor() function
target-i386: Simplify listflags() function
Conflicts:
target-i386/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s->blocker is really only used in hw/scsi/virtio-scsi.c; the only places
where it is used in hw/scsi/virtio-scsi-dataplane.c is when it is
allocated and when it is freed. That does not make a whole lot of sense
(and is actually wrong because this leads to s->blocker potentially
being NULL when blk_op_block_all() is called in virtio-scsi.c), so move
the allocation and destruction of s->blocker to the device realization
and unrealization in virtio-scsi.c, respectively.
Case in point:
$ echo -e 'eject drv\nquit' | \
x86_64-softmmu/qemu-system-x86_64 \
-monitor stdio -machine accel=qtest -display none \
-object iothread,id=thr -device virtio-scsi-pci,iothread=thr \
-drive if=none,file=test.qcow2,format=qcow2,id=drv \
-device scsi-cd,drive=drv
Without this patch:
(qemu) eject drv
[1] 10102 done
10103 segmentation fault (core dumped)
With this patch:
(qemu) eject drv
Device 'drv' is busy: block device is in use by data plane
(qemu) quit
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <1425057113-26940-1-git-send-email-mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the ivshmem device is built whenever both PCI and KVM support are
included. This patch gives it its own config option to allow easier
customization of whether to include it. It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices. However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.
To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
included in the build unconditionally.
While they could theoretically appear on any target platform with PCI-E,
they're pretty unlikely to appear on platforms that aren't Intel derived.
Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
add config options to enable these components, and enable them by default
only on x86 and arm platforms.
(Note that this patch does include these for aarch64, via its inclusion of
arm-softmmu.mak).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not safe to call blk_set_aio_context from outside BQL because of
the bdrv_drain_all there. Let's put it in the hotplug callback which
will be called by qdev device realization for each scsi device attached
to the bus.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1423969591-23646-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This mimics what is done in qdev_device_add, and lets the device be
freed in case something goes wrong. Otherwise, object_unparent returns
immediately without freeing the device, which is on the other hand left
in the parent bus's list of children.
scsi_bus_legacy_handle_cmdline then returns an error, and the HBA is
destroyed as well with object_unparent. But the lingering device that
was not removed in scsi_bus_legacy_add_drive cannot be removed now either,
and bus_unparent gets stuck in an infinite loop trying to empty the list
of children.
The right fix of course would be to assert in bus_add_child that the
device already has a bus, and remove the "safety net" that adds the
drive to the QOM tree in device_set_realized. I am not yet sure whether
that would entail changing all callers to qdev_create (as well as
isa_create and usb_create and the corresponding _try_create versions).
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
1. guest reIPL changes (Fan Zhang)
Implements subcode 5 and 6 of diag 0x308. This allows to use
/sys/firmware/[re]ipl/ccw/* and the chreipl and lsreipl tools in
Linux. In addition to the normal "change the disk" this also
allows to switch from booting an external kernel into rebooting
from a disk.
2. Memory page table walking (Thomas Huth)
Fix several page table walking functions, used in several places
like gdb server and instruction handling. Also use these functions
in several I/O related functions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=lR0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150218' into staging
Features for s390x/kvm
1. guest reIPL changes (Fan Zhang)
Implements subcode 5 and 6 of diag 0x308. This allows to use
/sys/firmware/[re]ipl/ccw/* and the chreipl and lsreipl tools in
Linux. In addition to the normal "change the disk" this also
allows to switch from booting an external kernel into rebooting
from a disk.
2. Memory page table walking (Thomas Huth)
Fix several page table walking functions, used in several places
like gdb server and instruction handling. Also use these functions
in several I/O related functions.
# gpg: Signature made Wed Feb 18 09:13:22 2015 GMT using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
* remotes/borntraeger/tags/s390x-20150218: (29 commits)
s390x/helper: Remove s390_cpu_physical_memory_map
s390x/pci: Rework memory access in zpci instruction
s390x/ioinst: Rework memory access in TPI instruction
s390x/ioinst: Rework memory access in CHSC instruction
s390x/ioinst: Rework memory access in STCRW instruction
s390x/ioinst: Rework memory access in TSCH instruction
s390x/ioinst: Set condition code in ioinst_handle_tsch() handler
s390x/ioinst: Rework memory access in STSCH instruction
s390x/ioinst: Rework memory access in SSCH instruction
s390x/ioinst: Rework memory access in MSCH instruction
s390x/css: Make schib parameter of css_do_msch const
s390x/mmu: Add function for accessing guest memory
s390x/kvm: Add function for injecting pgm access exceptions
s390x/mmu: Clean up mmu_translate_asc()
s390x/mmu: Check bit 52 in page table entry
s390x/mmu: Renaming related to the ASCE confusion
s390x/mmu: Add support for read-only regions
s390x/mmu: Fix the exception codes for illegal table entries
s390x/mmu: Fix exception types when checking the ASCEs
s390x/mmu: Fix translation exception code in lowcore
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The APIC ID compatibility code is required only for PC, and now that
x86_cpu_initfn() doesn't use x86_cpu_apic_id_from_index() anymore, that
code can be moved to pc.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ASvH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150218-1' into staging
usb: error handling fixes from Markus, make sysbus ehci arm-only.
# gpg: Signature made Wed Feb 18 09:54:13 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-usb-20150218-1:
Make sysbus EHCI devices ARM only by default
PPC: Don't use legacy -usbdevice support for setting up board
r2d: Don't use legacy -usbdevice support for setting up board
usb: Change usb_create_simple() to abort on failure
usb: Suppress bogus error when automatic usb-hub creation fails
usb: Do not prefix error_setg() messages with "Error: "
usb: Improve -usbdevice error reporting a bit
usb: usb_create() can't fail, drop useless error handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>