It is possible to due copy propagation for all operations, even the one
that have side effects or clobber arguments (it only concerns input
arguments). That said, the call operation should be handled differently
due to the variable number of arguments.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The copy propagation pass tries to keep track what is a copy of what
and what has copy of what, and in addition it keep a circular list of
of all the copies. Unfortunately this doesn't fully work: a mov from
a temp which has a state "COPY" changed it into a state "HAS_COPY".
Later when this temp is used again, it is considered has not having
copy and thus no propagation is done.
This patch fixes that by removing the hiearchy between copies, and thus
only keeping a "COPY" state both meaning "is a copy" and "has a copy".
The decision of which copy to use is deferred to the actual temp
replacement. At this stage there is not one best choice to do, but only
better choices than others. For doing the best choice the operation
would have to be parsed in reversed to know if a temp is going to be
used later or not. That what is done by the liveness analysis. At this
stage it is known that globals will be always live, that local temps
will be dead at the end of the translation block, and that the temps
will be dead at the end of the basic block. This means that this stage
should try to replace temps by local temps or globals and local temps
by globals.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The copy propagation doesn't check the types of the temps during copy
propagation. However TCG is using the mov_i32 for the i64 to i32
conversion and thus the two are not equivalent.
With this patch tcg_opt_gen_mov() doesn't consider two temps of
different type as copies anymore.
So far it seems the optimization was not aggressive enough to trigger
this bug, but it will be triggered later in this series once the copy
propagation is improved.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
TCG_TEMP_ANY has no different meaning than TCG_TEMP_UNDEF, so use
the later instead.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
movcond operation can be implemented on MIPS32 Release 2 using the MOVN,
MOVZ, SLT and SLTU instructions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
deposit operations can be optimized on MIPS32 Release 2 using the INS
instruction.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
rotr operations can be optimized on MIPS32 Release 2 using the ROTR and
ROTRV instructions. Also implemented rotl operations by subtracting the
shift from 32.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bswap operations can be optimized on MIPS32 Release 2 using the ROTR,
WSBH and SEH instructions. We can't use the non-R2 code to implement the
ops due to registers constraints, so don't define the corresponding
TCG_TARGET_HAS_bswap* values.
Also bswap16* operations are supposed to be called with the 16 high bits
zeroed. This is the case everywhere (including for TCG by definition)
except when called from the store helper. Remove the AND instructions from
bswap16* and move it there.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MIPS has some conditional branch instructions when comparing with zero.
Use them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use stack instead of temp_buf array in CPUState for TCG
temps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of int, use the correct TCGArg and TCGReg type: TCGReg when
representing a TCG target register, TCGArg when representing the latter
or a constant.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Recent versions of GCC emit warnings when compiling user mode targets.
Kill them by reordering a bit the #ifdef.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The 'Z' constraint has been introduced to map the zero register. However
when the op also accept a constant, there is no point to accept the zero
register in addition.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The xtensa-test image generates a sra_i32 with count 0x40.
Whether this is accident of tcg constant propagation or
originating directly from the instruction stream is immaterial.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Don't use -ffixed-gN. Don't link statically. Don't save/restore
AREG0 around calls. Don't allocate space on the stack for AREG0 save.
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, split out the tlb load logic to a new function.
Fixes the cases of two data registers and two address registers.
Fixes the signature of, and adds missing, qemu_ld/st opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Current code doesn't actually work in 32-bit mode at all. Since
no one really noticed, drop the complication of v7 and v8 cpus.
Eliminate the --sparc_cpu configure option and standardize macro
testing on TCG_TARGET_REG_BITS / HOST_LONG_BITS
Signed-off-by: Richard Henderson <rth@twiddle.net>
The address we pick in sparc64.ld is also 0x60000000, so doing a fixed map
on top of that is guaranteed to blow up. Choosing 0x40000000 is exactly
right for the max of code_gen_buffer_size set below.
No need to ever use MAP_FIXED. While getting our desired address helps
optimize the generated code, we won't fail if we don't get it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
When host and target have differing alignment rules, using a cast
and direct memory operation can result in SIGBUS. Use memcpy instead,
which the compiler will happily optimize when alignment is satisfied.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* 'usb.65' of git://git.kraxel.org/qemu:
uhci: Don't queue up packets after one with the SPD flag set
usb-redir: Revert usb-redir part of commit 93bfef4c
usb-redir: Add chardev open / close debug logging
usb-redir: Add support for migration
usb-redir: Store max_packet_size in endp_data
usb-redir: Add an already_in_flight packet-id queue
usb-redir: Change cancelled packet code into a generic packet-id queue
ehci: Walk async schedule before and after migration
ehci: Don't set seen to 0 when removing unseen queue-heads
configure: usbredir fixes
ehci: Don't process too much frames in 1 timer tick (v2)
ehci: Fix interrupts stopping when Interrupt Threshold Control is 8
ehci: switch to new-style memory ops
usb-host: allow emulated (non-async) control requests without USBPacket
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers
was not respecting the ABI requirement for 64-bit values
being aligned in registers.
Mirror the ARM port in use of helper functions to marshal
arguments into the correct registers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Neither of these functions were performing double-word
compares properly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 6375e09e changed the type of TranslationBlock.tb_next,
but failed to change the type of TCGContext.tb_next.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have to use different type to access float values when
USE_SOFTFLOAT_STRUCT_TYPES is defined.
Rework SH4 version of cpu_gdb_{read,write}_register() using
a single case, and fixing the coding style. Use ldll_p() and
stfl_p() to access float values.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While swapping constants to the second operand, swap
sources matching destinations to the first operand.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For proper cmov insns, as well as the non-goto-tb case
of conditional branch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implemented with setcond if the target does not provide
the optional opcode.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We should avoid accessing env at translation stage, except of course for
static values like the supported features.
Remove variables copied from env in DisasContext and use the TB flags
instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit fd4bab102 PC is restored in case of exception through code
retranslation. While it is clearly the thing to do in case it is not
not known if an helper is going to trigger an exception or not
(e.g. for load/store, FPU, etc.), it just make things slower when the
exception is already known at translation time.
Partially revert this commit and save PC in the TCG code. Set bstate to
BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep
helper. Make all the exception helpers to call raise_exception and mark
it as noreturn.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
gen_clr_t() and gen_set_t() have very few callers and can be remplaced
by a single line. Remove them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It's possible swap the two 16-bit words of a 32-bit register using a
rotation. If the TCG target doesn't implement rotation, the replacement
code is similar to the previously implemented code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The register being 32 bit long, after a shift to the right by 16 bits,
the upper 16 bit are already cleared. There is no need to call ext16u
to clear them.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
addv and subv helpers implementation is directly copied from the SH4
manual and looks quite complex. It is however possible to explain it
without branches, and is therefore possible to implement it with TCG.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to add a SH4 specific pickNaNMulAdd() to softfloat as
SH4 is always returning a default NaN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
QEMU as far as I know only reports LUN numbers using the modes that
are described in SAM4.
As such, since all LUN numbers generated by the SCSI emulation in QEMU
follow SAM4, we should set the HiSup bit in the standard INQUIRY data
to indicate such.
From SAM4:
4.6.3 LUNs overview
All LUN formats described in this standard are hierarchical in
structure even when only a single level in that hierarchy is used.
The HISUP bit shall be set to one in the standard INQUIRY data
(see SPC-4) when any LUN format described in this standard is used.
Non-hierarchical formats are outside the scope of this standard.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
