ACPI_PORT_SMI_CMD is alias for APM_CNT_IOPORT,
so make it really one instead of duplicating its value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will help to add Generic Address Structure to ACPI tables
without using packed C structures and avoid endianness
issues as API doesn't need an explicit conversion.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop duplicate in form of Acpi20GenericAddress and reuse
AcpiGenericAddress.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although linkspeed and duplex can be set in a linux guest via 'ethtool -s',
this requires custom ethtool commands for virtio-net by default.
Introduce a new feature flag, VIRTIO_NET_F_SPEED_DUPLEX, which allows
the hypervisor to export a linkspeed and duplex setting. The user can
subsequently overwrite it later if desired via: 'ethtool -s'.
Linkspeed and duplex settings can be set as:
'-device virtio-net,speed=10000,duplex=full'
where speed is [0...INT_MAX], and duplex is ["half"|"full"].
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In prepartion for using some of the high order feature bits, make sure that
virtio-net uses 64-bit values everywhere.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A subsequent patch to add support for setting linkspeed/duplex in
virtio-net, requires a few definitions from ethtool.h, which ends up
pulling in kernel.h and sysinfo.h as well.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtio-dev@lists.oasis-open.org
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated.
If destination qemu is already containing a dirty bitmap with the same name
as a migrated bitmap (for the same node), then, if their granularities are
the same the migration will be done, otherwise the error will be generated.
If destination qemu doesn't contain such bitmap it will be created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com
[Changed '+' to '*' as per list discussion. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Only-postcopy savevm states (dirty-bitmap) don't need live iteration, so
to disable them and stop transporting empty sections there is a new
savevm handler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180313180320.339796-10-vsementsov@virtuozzo.com
There would be savevm states (dirty-bitmap) which can migrate only in
postcopy stage. The corresponding pending is introduced here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20180313180320.339796-6-vsementsov@virtuozzo.com
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, fix min_block check and 32-bit cap, use -1
instead of errno on failure in nbd_negotiate_simple_meta_context,
ensure that block status makes progress on success]
Signed-off-by: Eric Blake <eblake@redhat.com>
Enabling bitmap successor is necessary to enable successors of bitmaps
being migrated before target vm start.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180207155837.92351-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The fd_is_socket() helper method is useful in a few places, so put it in
the common sockets code. Make the code more compact while moving it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are qemu_strtoNN functions for various sized integers. This adds two
more for plain int & unsigned int types, with suitable range checking.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
At the moment we unconditionally avoid mapping MSIX data of a BAR and
emulate MSIX table in QEMU. However it is 1) not always necessary as
a platform may provide a paravirt interface for MSIX configuration;
2) can affect the speed of MMIO access by emulating them in QEMU when
frequently accessed registers share same system page with MSIX data,
this is particularly a problem for systems with the page size bigger
than 4KB.
A new capability - VFIO_REGION_INFO_CAP_MSIX_MAPPABLE - has been added
to the kernel [1] which tells the userspace that mapping of the MSIX data
is possible now. This makes use of it so from now on QEMU tries mapping
the entire BAR as a whole and emulate MSIX on top of that.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch allows to unbind devices from QemuConsoles, using the new
graphic_console_close() function. The QemuConsole will show a static
display then, saying the device was unplugged. When re-plugging a
display later on the QemuConsole will be reused.
Eventually we will allocate and release QemuConsoles dynamically at some
point in the future, that'll need more infrastructure though to notify
user interfaces (gtk, sdl, spice, ...) about QemuConsoles coming and
going.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
So we can use the drm fourcc codes without a dependency on libdrm-devel.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Inorder to integerate the Secure Encryption Virtualization (SEV) support
add few high-level memory encryption APIs which can be used for encrypting
the guest memory region.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split from a patch by Brijesh Singh (brijesh.singh@amd.com).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note that VIRTIO_GPU_CAPSET_VIRGL2 was added manually so it has to be added
manually after re-running scripts/update-linux-headers.sh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iQEcBAABAgAGBQJapqP6AAoJEJykq7OBq3PIZasIAL+NKBQGa/e0FD28PYdLU/JE
sKZZ0O6+eVTCejGXap4bzbKOy+qZyOXvaRk5KNREc5A9R8HFBt5GotMfE80Cw9Nt
rryX+qVdf4w27u2jMqY4215jD5jy/nPijRQ0a8UBsi6z2PXVPPNeS3lMB8RSFEZS
IZu+l3j1op1wUlM4GfZvLCjmgHC+73lk6a5xZLJ2UvH9UoqJepgVZnSs2YvOctzG
LVGMhk6/yAy4hh3NWx/M2h2B2ASMJJya8XrLgelAVnr6CxKBeBII0bSPur+1YIH7
OkJhNsk6QKSWNFKtzXE6N+y1ryWLnbE8vzKSZt+xSzUDjhnqTm5iFpZQ+Ed16qA=
=nCAn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 12 Mar 2018 15:59:54 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: only permit standard C types and fixed size integer types
trace: remove use of QEMU specific types from trace probes
trace: include filename when printing parser error messages
simpletrace: fix timestamp argument type
log-for-trace.h: Split out parts of log.h used by trace.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The replay_mutex_lock/unlock/locked functions are now going to be used
for ensuring lock-step behaviour between the two threads. Make them
public API functions and also provide stubs for non-QEMU builds on
common paths.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095242.1060.16601.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds saving/restoring of the host clock field 'last'.
It is used in host clock calculation and therefore clock may
become incorrect when using restored vmstate.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095226.1060.50975.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch does not allows saving/loading vmstate when
replay events queue is not empty. There is no reliable
way to save events queue, because it describes internal
coroutine state. Therefore saving and loading operations
should be deferred to another record/replay step.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095214.1060.32939.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-23-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-20-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function only initialize the ISA bus.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-19-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-17-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-15-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the PC87312 inherits this abstract model, we remove the I8042
instance in the PREP machine.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20180308223946.26784-14-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-13-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-12-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-11-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-10-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-9-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This matches the isa_register_ioport() prototype.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-7-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-6-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc)
Message-Id: <20180308223946.26784-4-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Move the header from hw/isa/ to hw/dma/
- Remove the old i386/pc dependency
- use a bool type for the high_page_enable argument
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-3-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Again... (after 07dc788054 and 9157eee1b1).
We now extract the ISA bus specific helpers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-2-f4bug@amsat.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Actually enable the global memory barriers if supported by the OS.
Because only recent versions of Linux include the support, they
are disabled by default. Note that it also has to be disabled
for QEMU to run under Wine.
Before this patch, rcutorture reports 85 ns/read for my machine,
after the patch it reports 12.5 ns/read. On the other hand updates
go from 50 *micro*seconds to 20 *milli*seconds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new header file provides heavy-weight "global" memory barriers that
enforce memory ordering on each running thread belonging to the current
process. For now, use a dummy implementation that issues memory barriers
on both sides (matching what QEMU has been doing so far).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for introducing smp_mb_placeholder() and smp_mb_global().
The new smp_mb() in synchronize_rcu() is not strictly necessary, since
the first atomic_mb_set for rcu_gp_ctr provides the required ordering.
However, synchronize_rcu is not performance critical, and it *will* be
necessary to introduce a smp_mb_global before calling wait_for_readers().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The global hack for creating SCSI devices has recently been removed,
but this apparently broke SCSI devices on some boards that were not
ready for this change yet. For the pica61 machine you now get:
$ mips64-softmmu/qemu-system-mips64 -M pica61 -cdrom x.iso
qemu-system-mips64: -cdrom x.iso: machine type does not support if=scsi,bus=0,unit=2
Fix it by calling scsi_bus_legacy_handle_cmdline() after creating the
corresponding SCSI controller.
Fixes: 1454509726
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1520414644-11535-1-git-send-email-thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce ChardevClass.chr_machine_done() hook so that chardevs can run
customized procedures after machine init.
There was an existing mux user already that did similar thing but used a
raw machine done notifier. Generalize it into a framework, and let the
mux chardevs provide such a class-specific hook to achieve the same
thing. Then we can move the mux related code to the char-mux.c file.
Since at it, replace the mux_realized variable with the global
machine_init_done varible.
This notifier framework will be further leverged by other type of
chardevs soon.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-6-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have that variable but not exported. Export that so modules can have
a way to poke on whether machine init has finished.
Meanwhile, set that up even before calling the notifiers, so that
notifiers who may depend on this field will get a correct answer.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180306053320.15401-2-peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The e1000 NIC is getting old and is not a very good default for a
PCIe machine type. Change it to e1000e, which should be supported
by a good number of guests.
In particular, drivers for 82574 were added first to Linux 2.6.27 (2008)
and Windows 2008 R2. This does mean that Windows 2008 will not work
anymore with Q35 machine types and a default "-net nic -net xxx" network
configuration; it did work before because it does have an AHCI driver.
However, Windows 2008 has been declared out of main stream support
in 2015. It will get out of extended support in 2020. Windows 2008
R2 has the same end of support dates and, since the two are basically
Vista vs. Windows 7, R2 probably is more popular.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify half a dozen copies of very similar code (the only difference being
whether comparisons were case-sensitive) and use it also in Tricore,
which did not do any sorting of CPU model names.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* i.MX: Add i.MX7 SOC implementation and i.MX7 Sabre board
* Report the correct core count in A53 L2CTLR on the ZynqMP board
* linux-user: preliminary SVE support work (signal handling)
* hw/arm/boot: fix memory leak in case of error loading ELF file
* hw/arm/boot: avoid reading off end of buffer if passed very
small image file
* hw/arm: Use more CONFIG switches for the object files
* target/arm: Add "-cpu max" support
* hw/arm/virt: Support -machine gic-version=max
* hw/sd: improve debug tracing
* hw/sd: sdcard: Add the Tuning Command (CMD 19)
* MAINTAINERS: add Philippe as odd-fixes maintainer for SD
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CWr5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180309' into staging
target-arm queue:
* i.MX: Add i.MX7 SOC implementation and i.MX7 Sabre board
* Report the correct core count in A53 L2CTLR on the ZynqMP board
* linux-user: preliminary SVE support work (signal handling)
* hw/arm/boot: fix memory leak in case of error loading ELF file
* hw/arm/boot: avoid reading off end of buffer if passed very
small image file
* hw/arm: Use more CONFIG switches for the object files
* target/arm: Add "-cpu max" support
* hw/arm/virt: Support -machine gic-version=max
* hw/sd: improve debug tracing
* hw/sd: sdcard: Add the Tuning Command (CMD 19)
* MAINTAINERS: add Philippe as odd-fixes maintainer for SD
# gpg: Signature made Fri 09 Mar 2018 17:24:23 GMT
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180309: (25 commits)
MAINTAINERS: Add entries for SD (SDHCI, SDBus, SDCard)
sdhci: Fix a typo in comment
sdcard: Add the Tuning Command (CMD19)
sdcard: Display which protocol is used when tracing (SD or SPI)
sdcard: Display command name when tracing CMD/ACMD
sdcard: Do not trace CMD55, except when we already expect an ACMD
hw/arm/virt: Support -machine gic-version=max
hw/arm/virt: Add "max" to the list of CPU types "virt" supports
target/arm: Make 'any' CPU just an alias for 'max'
target/arm: Add "-cpu max" support
target/arm: Move definition of 'host' cpu type into cpu.c
target/arm: Query host CPU features on-demand at instance init
arm: avoid heap-buffer-overflow in load_aarch64_image
arm: fix load ELF error leak
hw/arm: Use more CONFIG switches for the object files
aarch64-linux-user: Add support for SVE signal frame records
aarch64-linux-user: Add support for EXTRA signal frame records
aarch64-linux-user: Remove struct target_aux_context
aarch64-linux-user: Split out helpers for guest signal handling
linux-user: Implement aarch64 PR_SVE_SET/GET_VL
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A persistent build problem we see is where a source file
accidentally omits the #include of log.h. This slips through
local developer testing because if you configure with the
default (log) trace backend trace.h will pull in log.h for you.
Compilation fails only if some other backend is selected.
To make this error cause a compile failure regardless of
the configured trace backend, split out the parts of log.h
that trace.h requires into a new log-for-trace.h header.
Since almost all manual uses of the log.h functions will
use constants or functions which aren't in log-for-trace.h,
this will let us catch missing #include "qemu/log.h" more
consistently.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180213140029.8308-1-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nested BDRV_POLL_WHILE() calls can occur. Currently
assert(!wait_->wakeup) fails in AIO_WAIT_WHILE() when this happens.
This patch converts the bool wait_->need_kick flag to an unsigned
wait_->num_waiters counter.
Nesting works correctly because outer AIO_WAIT_WHILE() callers evaluate
the condition again after the inner caller completes (invoking the inner
caller counts as aio_poll() progress).
Reported-by: "fuweiwei (C)" <fuweiwei2@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180307124619.6218-1-stefanha@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make audio_driver_lookup() try load the module in case it doesn't find
the driver in the registry. Also load all modules for -audio-help, so
the help output includes the help text for modular audio drivers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-3-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaoqOgAAoJEH8JsnLIjy/W2MMP/1gj7CJgtSG9wIzyBHjSWQMy
ofXEgRJO9t/smfUMlH2NdrW8P2LvYcmqOsEBkLJzCtl48fPexwtI/cunzVjutXcf
VlpqKz/8uN4C9D6m8FN/5kKf65l+tnVqnCoJgwafY5uT7jmoC8LF1xO2jo8a+lJd
0Dv6RxJUQq/tDR6OvO6aW4EzbOUcD4wkLvi/uz8+ZjV1BLSLlpdudejr6W9TnJY/
EGFedbxqjPV7fIvMbodbFp0Ie8Aw0WEL8ttERboeR4jbA/o+PZVGpPtHsr/4V6QO
Pgh6vH2rGavxFzwuCWEGhlLKGx66CGqqdTknm6lNJchepCvcfoYxjOPZv9FCaMUs
enC/x43xSkCmkwBwKKxpXqu1vS5nGdMebAwRjstSIplypjv2YOwS1AiU5snaDwuk
t9Gjkw0Wka5nySuYi43H2RPXmlWbh4T8DfQ6pOyJGvXGjm8t+f5BTaMtSWn6Iq2W
F6r1UezQJBDnUbpFgsRg4AP+htPGDHgsOg7KzCCd/lBHwbjX7dkQlAYbBZZ2OBF+
wQN5olDR6jsKIy2IlARNgNweZHW5UQa1cc+7HlVNNE5tqtkjo7aWPk/LhEzBCIHg
sWG3VH2y3lQlaMzYh1v+jnGrFoq1ZJU4sbjaxvQX8czjmaQvPtbzKuZAovQ4pGwa
g0SrWP6p9yLo0LXLuXBP
=WDF4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 09 Mar 2018 15:09:20 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (56 commits)
qemu-iotests: fix 203 migration completion race
iotests: Tweak 030 in order to trigger a race condition with parallel jobs
iotests: Skip test for ENOMEM error
iotests: Mark all tests executable
iotests: Test creating overlay when guest running
qemu-iotests: Test ssh image creation over QMP
qemu-iotests: Test qcow2 over file image creation with QMP
block: Fail bdrv_truncate() with negative size
file-posix: Fix no-op bdrv_truncate() with falloc preallocation
ssh: Support .bdrv_co_create
ssh: Pass BlockdevOptionsSsh to connect_to_ssh()
ssh: QAPIfy host-key-check option
ssh: Use QAPI BlockdevOptionsSsh object
sheepdog: Support .bdrv_co_create
sheepdog: QAPIfy "redundancy" create option
nfs: Support .bdrv_co_create
nfs: Use QAPI options in nfs_client_open()
rbd: Use qemu_rbd_connect() in qemu_rbd_do_create()
rbd: Assign s->snap/image_name in qemu_rbd_open()
rbd: Support .bdrv_co_create
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for cursor dmabufs. qemu has to render the cursor for
that, so in case a cursor is present qemu allocates a new dmabuf, blits
the scanout, blends in the pointer and passes on the new dmabuf to
spice-server. Without cursor qemu continues to simply pass on the
scanout dmabuf as-is.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180308090618.30147-4-kraxel@redhat.com
Secondary displays in multihead setups are allowed to have a NULL
DisplaySurface. Typically user interfaces handle this by hiding the
window which shows the display in question.
This isn't an option for vnc though because it simply hasn't a concept
of windows or outputs. So handle the situation by showing a placeholder
DisplaySurface instead. Also check in console_select whenever a surface
is preset in the first place before requesting an update.
This fixes a segfault which can be triggered by switching to an unused
display (via vtrl-alt-<nr>) in a multihead setup, for example using
-device virtio-vga,max_outputs=2.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 20180308161803.6152-1-kraxel@redhat.com
Add support for cursor dmabufs to gtk-egl. Just blend in the cursor
(if we have one) when rendering the dmabuf.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-7-kraxel@redhat.com
Compile in both gtk-egl and gtk-gl-area, then allow to choose at runtime
instead of compile time which opengl variant we want use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180306090951.22932-2-kraxel@redhat.com
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180307215010.30706-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add code needed to get a functional PCI subsytem when using in
conjunction with upstream Linux guest (4.13+). Tested to work against
"e1000e" (network adapter, using MSI interrupts) as well as
"usb-ehci" (USB controller, using legacy PCI interrupts).
Based on "i.MX6 Applications Processor Reference Manual" (Document
Number: IMX6DQRM Rev. 4) as well as corresponding dirver in Linux
kernel (circa 4.13 - 4.16 found in drivers/pci/dwc/*)
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a synchronous x-blockdev-create QMP command that can create
qcow2 images on a given node name.
We don't want to block while creating an image, so this is not the final
interface in all aspects, but BlockdevCreateOptionsQcow2 and
.bdrv_co_create() are what they actually might look like in the end. In
any case, this should be good enough to test whether we interpret
BlockdevCreateOptions as we should.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We'll use a separate source file for image creation, and we need to
check there whether the requested driver is whitelisted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
A few block drivers will need to rename .bdrv_create options for their
QAPIfication, so let's have a helper function for that.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows, given a QemuOpts for a QemuOptsList that was merged from
multiple QemuOptsList, to only consider those options that exist in one
specific list. Block drivers need this to separate format-layer create
options from protocol-level options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of passing a separate BlockDriverState* into qcow2_co_create(),
make use of the BlockdevRef that is included in BlockdevCreateOptions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-8-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED's bdrv_invalidate_cache implementation would like to reuse functions
that acquire/release the metadata locks. Call it from coroutine context
to simplify the logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-6-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This release renames the SiFive machines to sifive_e and sifive_u
to represent the SiFive Everywhere and SiFive Unleashed platforms.
SiFive has configurable soft-core IP, so it is intended that these
machines will be extended to enable a variety of SiFive IP blocks.
The CPU definition infrastructure has been improved and there are
now vendor CPU modules including the SiFiVe E31, E51, U34 and U54
cores. The emulation accuracy for the E series has been improved
by disabling the MMU for the E series. S mode has been disabled on
cores that only support M mode and U mode. The two Spike machines
that support two privileged ISA versions have been coalesced into
one file. This series has Signed-off-by from the core contributors.
*** Known Issues ***
* Disassembler has some checkpatch warnings for the sake of code brevity
* scripts/qemu-binfmt-conf.sh has checkpatch warnings due to line length
* PMP (Physical Memory Protection) is as-of-yet unused and needs testing
*** Changelog ***
v8.2
* Rebase
v8.1
* Fix missed case of renaming spike_v1.9 to spike_v1.9.1
v8
* Added linux-user/riscv/target_elf.h during rebase
* Make resetvec configurable and clear mpp and mie on reset
* Use SiFive E31, E51, U34 and U54 cores in SiFive machines
* Define SiFive E31, E51, U34 and U54 cores
* Refactor CPU core definition in preparation for vendor cores
* Prevent S or U mode unless S or U extensions are present
* SiFive E Series cores have no MMU
* SiFive E Series cores have U mode
* Make privileged ISA v1.10 implicit in CPU types
* Remove DRAM_BASE and EXT_IO_BASE as they vary by machine
* Correctly handle mtvec and stvec alignment with respect to RVC
* Print more machine mode state in riscv_cpu_dump_state
* Make riscv_isa_string use compact extension order method
* Fix bug introduced in v6 RISCV_CPU_TYPE_NAME macro change
* Parameterize spike v1.9.1 config string
* Coalesce spike_v1.9.1 and spike_v1.10 machines
* Rename sifive_e300 to sifive_e, and sifive_u500 to sifive_u
v7
* Make spike_v1.10 the default machine
* Rename spike_v1.9 to spike_v1.9.1 to match privileged spec version
* Remove empty target/riscv/trace-events file
* Monitor ROM 32-bit reset code needs to be target endian
* Add TARGET_TIOCGPTPEER to linux-user/riscv/termbits.h
* Add -initrd support to the virt board
* Fix naming in spike machine interface header
* Update copyright notice on RISC-V Spike machines
* Update copyright notice on RISC-V HTIF Console device
* Change CPU Core and translator to GPLv2+
* Change RISC-V Disassembler to GPLv2+
* Change SiFive Test Finisher to GPLv2+
* Change SiFive CLINT to GPLv2+
* Change SiFive PRCI to GPLv2+
* Change SiFive PLIC to GPLv2+
* Change RISC-V spike machines to GPLv2+
* Change RISC-V virt machine to GPLv2+
* Change SiFive E300 machine to GPLv2+
* Change SiFive U500 machine to GPLv2+
* Change RISC-V Hart Array to GPLv2+
* Change RISC-V HTIF device to GPLv2+
* Change SiFiveUART device to GPLv2+
v6
* Drop IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Remove some unnecessary commented debug statements
* Change RISCV_CPU_TYPE_NAME to use riscv-cpu suffix
* Define all CPU variants for linux-user
* qemu_log calls require trailing \n
* Replace PLIC printfs with qemu_log
* Tear out unused HTIF code and eliminate shouting debug messages
* Fix illegal instruction when sfence.vma is passed (rs2) arguments
* Make updates to PTE accessed and dirty bits atomic
* Only require atomic PTE updates on MTTCG enabled guests
* Page fault if accessed or dirty bits can't be updated
* Fix get_physical_address PTE reads and writes on riscv32
* Remove erroneous comments from the PLIC
* Default enable MTTCG
* Make WFI less conservative
* Unify local interrupt handling
* Expunge HTIF interrupts
* Always access mstatus.mip under a lock
* Don't implement rdtime/rdtimeh in system mode (bbl emulates them)
* Implement insreth/cycleh for rv32 and always enable user-mode counters
* Add GDB stub support for reading and writing CSRs
* Rename ENABLE_CHARDEV #ifdef from HTIF code
* Replace bad HTIF ELF code with load_elf symbol callback
* Convert chained if else fault handlers to switch statements
* Use RISCV exception codes for linux-user page faults
v5
* Implement NaN-boxing for flw, set high order bits to 1
* Use float_muladd_negate_* flags to floatXX_muladd
* Use IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Fix TARGET_NR_syscalls
* Update linux-user/riscv/syscall_nr.h
* Fix FENCE.I, needs to terminate translation block
* Adjust unusual convention for interruptno >= 0
v4
* Add @riscv: since 2.12 to CpuInfoArch
* Remove misleading little-endian comment from load_kernel
* Rename cpu-model property to cpu-type
* Drop some unnecessary inline function attributes
* Don't allow GDB to set value of x0 register
* Remove unnecessary empty property lists
* Add Test Finisher device to implement poweroff in virt machine
* Implement priv ISA v1.10 trap and sret/mret xPIE/xIE behavior
* Store fflags data in fp_status
* Purge runtime users of helper_raise_exception
* Fix validate_csr
* Tidy gen_jalr
* Tidy immediate shifts
* Add gen_exception_inst_addr_mis
* Add gen_exception_debug
* Add gen_exception_illegal
* Tidy helper_fclass_*
* Split rounding mode setting to a new function
* Enforce MSTATUS_FS via TB flags
* Implement acquire/release barrier semantics
* Use atomic operations as required
* Fix FENCE and FENCE_I
* Remove commented code from spike machines
* PAGE_WRITE permissions can be set on loads if page is already dirty
* The result of format conversion on an NaN must be a quiet NaN
* Add missing process_queued_cpu_work to riscv linux-user
* Remove float(32|64)_classify from cpu.h
* Removed nonsensical unions aliasing the same type
* Use uintN_t instead of uintN_fast_t in fpu_helper.c
* Use macros for FPU exception values in softfloat_flags_to_riscv
* Move code to set round mode into set_fp_round_mode function
* Convert set_fp_exceptions from a macro to an inline function
* Convert round mode helper into an inline function
* Make fpu_helper ieee_rm array static const
* Include cpu_mmu_index in cpu_get_tb_cpu_state flags
* Eliminate MPRV influence on mmu_index
* Remove unrecoverable do_unassigned_access function
* Only update PTE accessed and dirty bits if necessary
* Remove unnecessary tlb_flush in set_mode as mode is in mmu_idx
* Remove buggy support for misa writes. misa writes are optional
and are not implemented in any known hardware
* Always set PTE read or execute permissions during page walk
* Reorder helper function declarations to match order in helper.c
* Remove redundant variable declaration in get_physical_address
* Remove duplicated code from get_physical_address
* Use mmu_idx instead of mem_idx in riscv_cpu_get_phys_page_debug
v3
* Fix indentation in PMP and HTIF debug macros
* Fix disassembler checkpatch open brace '{' on next line errors
* Fix trailing statements on next line in decode_inst_decompress
* NOTE: the other checkpatch issues have been reviewed previously
v2
* Remove redundant NULL terminators from disassembler register arrays
* Change disassembler register name arrays to const
* Refine disassembler internal function names
* Update dates in disassembler copyright message
* Remove #ifdef CONFIG_USER_ONLY version of cpu_has_work
* Use ULL suffix on 64-bit constants
* Move riscv_cpu_mmu_index from cpu.h to helper.c
* Move riscv_cpu_hw_interrupts_pending from cpu.h to helper.c
* Remove redundant TARGET_HAS_ICE from cpu.h
* Use qemu_irq instead of void* for irq definition in cpu.h
* Remove duplicate typedef from struct CPURISCVState
* Remove redundant g_strdup from cpu_register
* Remove redundant tlb_flush from riscv_cpu_reset
* Remove redundant mode calculation from get_physical_address
* Remove redundant debug mode printf and dcsr comment
* Remove redundant clearing of MSB for bare physical addresses
* Use g_assert_not_reached for invalid mode in get_physical_address
* Use g_assert_not_reached for unreachable checks in get_physical_address
* Use g_assert_not_reached for unreachable type in raise_mmu_exception
* Return exception instead of aborting for misaligned fetches
* Move exception defines from cpu.h to cpu_bits.h
* Remove redundant breakpoint control definitions from cpu_bits.h
* Implement riscv_cpu_unassigned_access exception handling
* Log and raise exceptions for unimplemented CSRs
* Match Spike HTIF exit behavior - don’t print TEST-PASSED
* Make frm,fflags,fcsr writes trap when mstatus.FS is clear
* Use g_assert_not_reached for unreachable invalid mode
* Make hret,uret,dret generate illegal instructions
* Move riscv_cpu_dump_state and int/fpr regnames to cpu.c
* Lift interrupt flag and mask into constants in cpu_bits.h
* Change trap debugging to use qemu_log_mask LOG_TRACE
* Change CSR debugging to use qemu_log_mask LOG_TRACE
* Change PMP debugging to use qemu_log_mask LOG_TRACE
* Remove commented code from pmp.c
* Change CpuInfoRISCV qapi schema docs to Since 2.12
* Change RV feature macro to use target_ulong cast
* Remove riscv_feature and instead use misa extension flags
* Make riscv_flush_icache_syscall a no-op
* Undo checkpatch whitespace fixes in unrelated linux-user code
* Remove redudant constants and tidy up cpu_bits.h
* Make helper_fence_i a no-op
* Move include "exec/cpu-all" to end of cpu.h
* Rename set_privilege to riscv_set_mode
* Move redundant forward declaration for cpu_riscv_translate_address
* Remove TCGV_UNUSED from riscv_translate_init
* Add comment to pmp.c stating the code is untested and currently unused
* Use ctz to simplify decoding of PMP NAPOT address ranges
* Change pmp_is_in_range to use than equal for end addresses
* Fix off by one error in pmp_update_rule
* Rearrange PMP_DEBUG so that formatting is compile-time checked
* Rearrange trap debugging so that formatting is compile-time checked
* Rearrange PLIC debugging so that formatting is compile-time checked
* Use qemu_log/qemu_log_mask for HTIF logging and debugging
* Move exception and interrupt names into cpu.c
* Add Palmer Dabbelt as a RISC-V Maintainer
* Rebase against current qemu master branch
v1
* initial version based on forward port from riscv-qemu repository
*** Background ***
"RISC-V is an open, free ISA enabling a new era of processor innovation
through open standard collaboration. Born in academia and research,
RISC-V ISA delivers a new level of free, extensible software and
hardware freedom on architecture, paving the way for the next 50 years
of computing design and innovation."
The QEMU RISC-V port has been developed and maintained out-of-tree for
several years by Sagar Karandikar and Bastian Koppelmann. The RISC-V
Privileged specification has evolved substantially over this period but
has recently been solidifying. The RISC-V Base ISA has been frozon for
some time and the Privileged ISA, GCC toolchain and Linux ABI are now
quite stable. I have recently joined Sagar and Bastian as a RISC-V QEMU
Maintainer and hope to support upstreaming the port.
There are multiple vendors taping out, preparing to ship, or shipping
silicon that implements the RISC-V Privileged ISA Version 1.10. There
are also several RISC-V Soft-IP cores implementing Privileged ISA
Version 1.10 that run on FPGA such as SiFive's Freedom U500 Platform
and the U54‑MC RISC-V Core IP, among many more implementations from a
variety of vendors. See https://riscv.org/ for more details.
RISC-V support was upstreamed in binutils 2.28 and GCC 7.1 in the first
half of 2016. RISC-V support is now available in LLVM top-of-tree and
the RISC-V Linux port was accepted into Linux 4.15-rc1 late last year
and is available in the Linux 4.15 release. GLIBC 2.27 added support
for the RISC-V ISA running on Linux (requires at least binutils-2.30,
gcc-7.3.0, and linux-4.15). We believe it is timely to submit the
RISC-V QEMU port for upstream review with the goal of incorporating
RISC-V support into the upcoming QEMU 2.12 release.
The RISC-V QEMU port is still under active development, mostly with
respect to device emulation, the addition of Hypervisor support as
specified in the RISC-V Draft Privileged ISA Version 1.11, and Vector
support once the first draft is finalized later this year. We believe
now is the appropriate time for RISC-V QEMU development to be carried
out in the main QEMU repository as the code will benefit from more
rigorous review. The RISC-V QEMU port currently supports all the ISA
extensions that have been finalized and frozen in the Base ISA.
Blog post about recent additions to RISC-V QEMU: https://goo.gl/fJ4zgk
The RISC-V QEMU wiki: https://github.com/riscv/riscv-qemu/wiki
Instructions for building a busybox+dropbear root image, BBL (Berkeley
Boot Loader) and linux kernel image for use with the RISC-V QEMU
'virt' machine: https://github.com/michaeljclark/busybear-linux
*** Overview ***
The RISC-V QEMU port implements the following specifications:
* RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10
The RISC-V QEMU port supports the following instruction set extensions:
* RV32GC with Supervisor-mode and User-mode (RV32IMAFDCSU)
* RV64GC with Supervisor-mode and User-mode (RV64IMAFDCSU)
The RISC-V QEMU port adds the following targets to QEMU:
* riscv32-softmmu
* riscv64-softmmu
* riscv32-linux-user
* riscv64-linux-user
The RISC-V QEMU port supports the following hardware:
* HTIF Console (Host Target Interface)
* SiFive CLINT (Core Local Interruptor) for Timer interrupts and IPIs
* SiFive PLIC (Platform Level Interrupt Controller)
* SiFive Test (Test Finisher) for exiting simulation
* SiFive UART, PRCI, AON, PWM, QSPI support is partially implemented
* VirtIO MMIO (GPEX PCI support will be added in a future patch)
* Generic 16550A UART emulation using 'hw/char/serial.c'
* MTTCG and SMP support (PLIC and CLINT) on the 'virt' machine
The RISC-V QEMU full system emulator supports 5 machines:
* 'spike_v1.9.1', CLINT, PLIC, HTIF console, config-string, Priv v1.9.1
* 'spike_v1.10', CLINT, PLIC, HTIF console, device-tree, Priv v1.10
* 'sifive_e', CLINT, PLIC, SiFive UART, HiFive1 compat, Priv v1.10
* 'sifive_u', CLINT, PLIC, SiFive UART, device-tree, Priv v1.10
* 'virt', CLINT, PLIC, 16550A UART, VirtIO, device-tree, Priv v1.10
This is a list of RISC-V QEMU Port Contributors:
* Alex Suykov
* Andreas Schwab
* Antony Pavlov
* Bastian Koppelmann
* Bruce Hoult
* Chih-Min Chao
* Daire McNamara
* Darius Rad
* David Abdurachmanov
* Hesham Almatary
* Ivan Griffin
* Jim Wilson
* Kito Cheng
* Michael Clark
* Palmer Dabbelt
* Richard Henderson
* Sagar Karandikar
* Shea Levy
* Stefan O'Rear
Notes:
* contributor email addresses available off-list on request.
* checkpatch has been run on all 23 patches.
* checkpatch exceptions are noted in patches that have errors.
* passes "make check" on full build for all targets
* tested riscv-linux-4.6.2 on 'spike_v1.9.1' machine
* tested riscv-linux-4.15 on 'spike_v1.10' and 'virt' machines
* tested SiFive HiFive1 binaries in 'sifive_e' machine
* tested RV64 on 32-bit i386
This patch series includes the following patches:
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQR8mZMOsXzYugc9Xvpr8dezV+8+TwUCWqGRpAAKCRBr8dezV+8+
T2mMAJ9ptK/7Bs3lE+Mki/ymlTPqhXtyxACfZkyfQf1mfhcXnB+oTG1RvEtblY8=
=TJc8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riscv/tags/riscv-qemu-upstream-v8.2' into staging
QEMU RISC-V Emulation Support (RV64GC, RV32GC)
This release renames the SiFive machines to sifive_e and sifive_u
to represent the SiFive Everywhere and SiFive Unleashed platforms.
SiFive has configurable soft-core IP, so it is intended that these
machines will be extended to enable a variety of SiFive IP blocks.
The CPU definition infrastructure has been improved and there are
now vendor CPU modules including the SiFiVe E31, E51, U34 and U54
cores. The emulation accuracy for the E series has been improved
by disabling the MMU for the E series. S mode has been disabled on
cores that only support M mode and U mode. The two Spike machines
that support two privileged ISA versions have been coalesced into
one file. This series has Signed-off-by from the core contributors.
*** Known Issues ***
* Disassembler has some checkpatch warnings for the sake of code brevity
* scripts/qemu-binfmt-conf.sh has checkpatch warnings due to line length
* PMP (Physical Memory Protection) is as-of-yet unused and needs testing
*** Changelog ***
v8.2
* Rebase
v8.1
* Fix missed case of renaming spike_v1.9 to spike_v1.9.1
v8
* Added linux-user/riscv/target_elf.h during rebase
* Make resetvec configurable and clear mpp and mie on reset
* Use SiFive E31, E51, U34 and U54 cores in SiFive machines
* Define SiFive E31, E51, U34 and U54 cores
* Refactor CPU core definition in preparation for vendor cores
* Prevent S or U mode unless S or U extensions are present
* SiFive E Series cores have no MMU
* SiFive E Series cores have U mode
* Make privileged ISA v1.10 implicit in CPU types
* Remove DRAM_BASE and EXT_IO_BASE as they vary by machine
* Correctly handle mtvec and stvec alignment with respect to RVC
* Print more machine mode state in riscv_cpu_dump_state
* Make riscv_isa_string use compact extension order method
* Fix bug introduced in v6 RISCV_CPU_TYPE_NAME macro change
* Parameterize spike v1.9.1 config string
* Coalesce spike_v1.9.1 and spike_v1.10 machines
* Rename sifive_e300 to sifive_e, and sifive_u500 to sifive_u
v7
* Make spike_v1.10 the default machine
* Rename spike_v1.9 to spike_v1.9.1 to match privileged spec version
* Remove empty target/riscv/trace-events file
* Monitor ROM 32-bit reset code needs to be target endian
* Add TARGET_TIOCGPTPEER to linux-user/riscv/termbits.h
* Add -initrd support to the virt board
* Fix naming in spike machine interface header
* Update copyright notice on RISC-V Spike machines
* Update copyright notice on RISC-V HTIF Console device
* Change CPU Core and translator to GPLv2+
* Change RISC-V Disassembler to GPLv2+
* Change SiFive Test Finisher to GPLv2+
* Change SiFive CLINT to GPLv2+
* Change SiFive PRCI to GPLv2+
* Change SiFive PLIC to GPLv2+
* Change RISC-V spike machines to GPLv2+
* Change RISC-V virt machine to GPLv2+
* Change SiFive E300 machine to GPLv2+
* Change SiFive U500 machine to GPLv2+
* Change RISC-V Hart Array to GPLv2+
* Change RISC-V HTIF device to GPLv2+
* Change SiFiveUART device to GPLv2+
v6
* Drop IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Remove some unnecessary commented debug statements
* Change RISCV_CPU_TYPE_NAME to use riscv-cpu suffix
* Define all CPU variants for linux-user
* qemu_log calls require trailing \n
* Replace PLIC printfs with qemu_log
* Tear out unused HTIF code and eliminate shouting debug messages
* Fix illegal instruction when sfence.vma is passed (rs2) arguments
* Make updates to PTE accessed and dirty bits atomic
* Only require atomic PTE updates on MTTCG enabled guests
* Page fault if accessed or dirty bits can't be updated
* Fix get_physical_address PTE reads and writes on riscv32
* Remove erroneous comments from the PLIC
* Default enable MTTCG
* Make WFI less conservative
* Unify local interrupt handling
* Expunge HTIF interrupts
* Always access mstatus.mip under a lock
* Don't implement rdtime/rdtimeh in system mode (bbl emulates them)
* Implement insreth/cycleh for rv32 and always enable user-mode counters
* Add GDB stub support for reading and writing CSRs
* Rename ENABLE_CHARDEV #ifdef from HTIF code
* Replace bad HTIF ELF code with load_elf symbol callback
* Convert chained if else fault handlers to switch statements
* Use RISCV exception codes for linux-user page faults
v5
* Implement NaN-boxing for flw, set high order bits to 1
* Use float_muladd_negate_* flags to floatXX_muladd
* Use IEEE 754-201x minimumNumber/maximumNumber for fmin/fmax
* Fix TARGET_NR_syscalls
* Update linux-user/riscv/syscall_nr.h
* Fix FENCE.I, needs to terminate translation block
* Adjust unusual convention for interruptno >= 0
v4
* Add @riscv: since 2.12 to CpuInfoArch
* Remove misleading little-endian comment from load_kernel
* Rename cpu-model property to cpu-type
* Drop some unnecessary inline function attributes
* Don't allow GDB to set value of x0 register
* Remove unnecessary empty property lists
* Add Test Finisher device to implement poweroff in virt machine
* Implement priv ISA v1.10 trap and sret/mret xPIE/xIE behavior
* Store fflags data in fp_status
* Purge runtime users of helper_raise_exception
* Fix validate_csr
* Tidy gen_jalr
* Tidy immediate shifts
* Add gen_exception_inst_addr_mis
* Add gen_exception_debug
* Add gen_exception_illegal
* Tidy helper_fclass_*
* Split rounding mode setting to a new function
* Enforce MSTATUS_FS via TB flags
* Implement acquire/release barrier semantics
* Use atomic operations as required
* Fix FENCE and FENCE_I
* Remove commented code from spike machines
* PAGE_WRITE permissions can be set on loads if page is already dirty
* The result of format conversion on an NaN must be a quiet NaN
* Add missing process_queued_cpu_work to riscv linux-user
* Remove float(32|64)_classify from cpu.h
* Removed nonsensical unions aliasing the same type
* Use uintN_t instead of uintN_fast_t in fpu_helper.c
* Use macros for FPU exception values in softfloat_flags_to_riscv
* Move code to set round mode into set_fp_round_mode function
* Convert set_fp_exceptions from a macro to an inline function
* Convert round mode helper into an inline function
* Make fpu_helper ieee_rm array static const
* Include cpu_mmu_index in cpu_get_tb_cpu_state flags
* Eliminate MPRV influence on mmu_index
* Remove unrecoverable do_unassigned_access function
* Only update PTE accessed and dirty bits if necessary
* Remove unnecessary tlb_flush in set_mode as mode is in mmu_idx
* Remove buggy support for misa writes. misa writes are optional
and are not implemented in any known hardware
* Always set PTE read or execute permissions during page walk
* Reorder helper function declarations to match order in helper.c
* Remove redundant variable declaration in get_physical_address
* Remove duplicated code from get_physical_address
* Use mmu_idx instead of mem_idx in riscv_cpu_get_phys_page_debug
v3
* Fix indentation in PMP and HTIF debug macros
* Fix disassembler checkpatch open brace '{' on next line errors
* Fix trailing statements on next line in decode_inst_decompress
* NOTE: the other checkpatch issues have been reviewed previously
v2
* Remove redundant NULL terminators from disassembler register arrays
* Change disassembler register name arrays to const
* Refine disassembler internal function names
* Update dates in disassembler copyright message
* Remove #ifdef CONFIG_USER_ONLY version of cpu_has_work
* Use ULL suffix on 64-bit constants
* Move riscv_cpu_mmu_index from cpu.h to helper.c
* Move riscv_cpu_hw_interrupts_pending from cpu.h to helper.c
* Remove redundant TARGET_HAS_ICE from cpu.h
* Use qemu_irq instead of void* for irq definition in cpu.h
* Remove duplicate typedef from struct CPURISCVState
* Remove redundant g_strdup from cpu_register
* Remove redundant tlb_flush from riscv_cpu_reset
* Remove redundant mode calculation from get_physical_address
* Remove redundant debug mode printf and dcsr comment
* Remove redundant clearing of MSB for bare physical addresses
* Use g_assert_not_reached for invalid mode in get_physical_address
* Use g_assert_not_reached for unreachable checks in get_physical_address
* Use g_assert_not_reached for unreachable type in raise_mmu_exception
* Return exception instead of aborting for misaligned fetches
* Move exception defines from cpu.h to cpu_bits.h
* Remove redundant breakpoint control definitions from cpu_bits.h
* Implement riscv_cpu_unassigned_access exception handling
* Log and raise exceptions for unimplemented CSRs
* Match Spike HTIF exit behavior - don’t print TEST-PASSED
* Make frm,fflags,fcsr writes trap when mstatus.FS is clear
* Use g_assert_not_reached for unreachable invalid mode
* Make hret,uret,dret generate illegal instructions
* Move riscv_cpu_dump_state and int/fpr regnames to cpu.c
* Lift interrupt flag and mask into constants in cpu_bits.h
* Change trap debugging to use qemu_log_mask LOG_TRACE
* Change CSR debugging to use qemu_log_mask LOG_TRACE
* Change PMP debugging to use qemu_log_mask LOG_TRACE
* Remove commented code from pmp.c
* Change CpuInfoRISCV qapi schema docs to Since 2.12
* Change RV feature macro to use target_ulong cast
* Remove riscv_feature and instead use misa extension flags
* Make riscv_flush_icache_syscall a no-op
* Undo checkpatch whitespace fixes in unrelated linux-user code
* Remove redudant constants and tidy up cpu_bits.h
* Make helper_fence_i a no-op
* Move include "exec/cpu-all" to end of cpu.h
* Rename set_privilege to riscv_set_mode
* Move redundant forward declaration for cpu_riscv_translate_address
* Remove TCGV_UNUSED from riscv_translate_init
* Add comment to pmp.c stating the code is untested and currently unused
* Use ctz to simplify decoding of PMP NAPOT address ranges
* Change pmp_is_in_range to use than equal for end addresses
* Fix off by one error in pmp_update_rule
* Rearrange PMP_DEBUG so that formatting is compile-time checked
* Rearrange trap debugging so that formatting is compile-time checked
* Rearrange PLIC debugging so that formatting is compile-time checked
* Use qemu_log/qemu_log_mask for HTIF logging and debugging
* Move exception and interrupt names into cpu.c
* Add Palmer Dabbelt as a RISC-V Maintainer
* Rebase against current qemu master branch
v1
* initial version based on forward port from riscv-qemu repository
*** Background ***
"RISC-V is an open, free ISA enabling a new era of processor innovation
through open standard collaboration. Born in academia and research,
RISC-V ISA delivers a new level of free, extensible software and
hardware freedom on architecture, paving the way for the next 50 years
of computing design and innovation."
The QEMU RISC-V port has been developed and maintained out-of-tree for
several years by Sagar Karandikar and Bastian Koppelmann. The RISC-V
Privileged specification has evolved substantially over this period but
has recently been solidifying. The RISC-V Base ISA has been frozon for
some time and the Privileged ISA, GCC toolchain and Linux ABI are now
quite stable. I have recently joined Sagar and Bastian as a RISC-V QEMU
Maintainer and hope to support upstreaming the port.
There are multiple vendors taping out, preparing to ship, or shipping
silicon that implements the RISC-V Privileged ISA Version 1.10. There
are also several RISC-V Soft-IP cores implementing Privileged ISA
Version 1.10 that run on FPGA such as SiFive's Freedom U500 Platform
and the U54‑MC RISC-V Core IP, among many more implementations from a
variety of vendors. See https://riscv.org/ for more details.
RISC-V support was upstreamed in binutils 2.28 and GCC 7.1 in the first
half of 2016. RISC-V support is now available in LLVM top-of-tree and
the RISC-V Linux port was accepted into Linux 4.15-rc1 late last year
and is available in the Linux 4.15 release. GLIBC 2.27 added support
for the RISC-V ISA running on Linux (requires at least binutils-2.30,
gcc-7.3.0, and linux-4.15). We believe it is timely to submit the
RISC-V QEMU port for upstream review with the goal of incorporating
RISC-V support into the upcoming QEMU 2.12 release.
The RISC-V QEMU port is still under active development, mostly with
respect to device emulation, the addition of Hypervisor support as
specified in the RISC-V Draft Privileged ISA Version 1.11, and Vector
support once the first draft is finalized later this year. We believe
now is the appropriate time for RISC-V QEMU development to be carried
out in the main QEMU repository as the code will benefit from more
rigorous review. The RISC-V QEMU port currently supports all the ISA
extensions that have been finalized and frozen in the Base ISA.
Blog post about recent additions to RISC-V QEMU: https://goo.gl/fJ4zgk
The RISC-V QEMU wiki: https://github.com/riscv/riscv-qemu/wiki
Instructions for building a busybox+dropbear root image, BBL (Berkeley
Boot Loader) and linux kernel image for use with the RISC-V QEMU
'virt' machine: https://github.com/michaeljclark/busybear-linux
*** Overview ***
The RISC-V QEMU port implements the following specifications:
* RISC-V Instruction Set Manual Volume I: User-Level ISA Version 2.2
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.9.1
* RISC-V Instruction Set Manual Volume II: Privileged ISA Version 1.10
The RISC-V QEMU port supports the following instruction set extensions:
* RV32GC with Supervisor-mode and User-mode (RV32IMAFDCSU)
* RV64GC with Supervisor-mode and User-mode (RV64IMAFDCSU)
The RISC-V QEMU port adds the following targets to QEMU:
* riscv32-softmmu
* riscv64-softmmu
* riscv32-linux-user
* riscv64-linux-user
The RISC-V QEMU port supports the following hardware:
* HTIF Console (Host Target Interface)
* SiFive CLINT (Core Local Interruptor) for Timer interrupts and IPIs
* SiFive PLIC (Platform Level Interrupt Controller)
* SiFive Test (Test Finisher) for exiting simulation
* SiFive UART, PRCI, AON, PWM, QSPI support is partially implemented
* VirtIO MMIO (GPEX PCI support will be added in a future patch)
* Generic 16550A UART emulation using 'hw/char/serial.c'
* MTTCG and SMP support (PLIC and CLINT) on the 'virt' machine
The RISC-V QEMU full system emulator supports 5 machines:
* 'spike_v1.9.1', CLINT, PLIC, HTIF console, config-string, Priv v1.9.1
* 'spike_v1.10', CLINT, PLIC, HTIF console, device-tree, Priv v1.10
* 'sifive_e', CLINT, PLIC, SiFive UART, HiFive1 compat, Priv v1.10
* 'sifive_u', CLINT, PLIC, SiFive UART, device-tree, Priv v1.10
* 'virt', CLINT, PLIC, 16550A UART, VirtIO, device-tree, Priv v1.10
This is a list of RISC-V QEMU Port Contributors:
* Alex Suykov
* Andreas Schwab
* Antony Pavlov
* Bastian Koppelmann
* Bruce Hoult
* Chih-Min Chao
* Daire McNamara
* Darius Rad
* David Abdurachmanov
* Hesham Almatary
* Ivan Griffin
* Jim Wilson
* Kito Cheng
* Michael Clark
* Palmer Dabbelt
* Richard Henderson
* Sagar Karandikar
* Shea Levy
* Stefan O'Rear
Notes:
* contributor email addresses available off-list on request.
* checkpatch has been run on all 23 patches.
* checkpatch exceptions are noted in patches that have errors.
* passes "make check" on full build for all targets
* tested riscv-linux-4.6.2 on 'spike_v1.9.1' machine
* tested riscv-linux-4.15 on 'spike_v1.10' and 'virt' machines
* tested SiFive HiFive1 binaries in 'sifive_e' machine
* tested RV64 on 32-bit i386
This patch series includes the following patches:
# gpg: Signature made Thu 08 Mar 2018 19:40:20 GMT
# gpg: using DSA key 6BF1D7B357EF3E4F
# gpg: Good signature from "Michael Clark <michaeljclark@mac.com>"
# gpg: aka "Michael Clark <mjc@sifive.com>"
# gpg: aka "Michael Clark <michael@metaparadigm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F
* remotes/riscv/tags/riscv-qemu-upstream-v8.2: (23 commits)
RISC-V Build Infrastructure
SiFive Freedom U Series RISC-V Machine
SiFive Freedom E Series RISC-V Machine
SiFive RISC-V PRCI Block
SiFive RISC-V UART Device
RISC-V VirtIO Machine
SiFive RISC-V Test Finisher
RISC-V Spike Machines
SiFive RISC-V PLIC Block
SiFive RISC-V CLINT Block
RISC-V HART Array
RISC-V HTIF Console
Add symbol table callback interface to load_elf
RISC-V Linux User Emulation
RISC-V Physical Memory Protection
RISC-V TCG Code Generation
RISC-V GDB Stub
RISC-V FPU Support
RISC-V CPU Helpers
RISC-V Disassembler
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 00d09fdbba ("vl: pause vcpus before
stopping iothreads") and commit dce8921b2b
("iothread: Stop threads before main() quits") tried to work around the
fact that emulation was still active during termination by stopping
iothreads. They suffer from race conditions:
1. virtio_scsi_handle_cmd_vq() racing with iothread_stop_all() hits the
virtio_scsi_ctx_check() assertion failure because the BDS AioContext
has been modified by iothread_stop_all().
2. Guest vq kick racing with main loop termination leaves a readable
ioeventfd that is handled by the next aio_poll() when external
clients are enabled again, resulting in unwanted emulation activity.
This patch obsoletes those commits by fully disabling emulation activity
when vcpus are stopped.
Use the new vm_shutdown() function instead of pause_all_vcpus() so that
vm change state handlers are invoked too. Virtio devices will now stop
their ioeventfds, preventing further emulation activity after vm_stop().
Note that vm_stop(RUN_STATE_SHUTDOWN) cannot be used because it emits a
QMP STOP event that may affect existing clients.
It is no longer necessary to call replay_disable_events() directly since
vm_shutdown() does so already.
Drop iothread_stop_all() since it is no longer used.
Cc: Fam Zheng <famz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180307144205.20619-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Sometimes it's necessary for the main loop thread to run a BH in an
IOThread and wait for its completion. This primitive is useful during
startup/shutdown to synchronize and avoid race conditions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20180307144205.20619-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce an sccb_mask_t to be used for SCLP event masks instead of just
unsigned int or uint32_t. This will allow later to extend the mask with
more ease.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1519407778-23095-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The other event handlers (quiesce and cpu) do not define these
handlers, and this one does nothing, so it can be removed.
Signed-off-by: Nia Alarie <nia.alarie@gmail.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180306100721.19419-1-nia.alarie@gmail.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
This provides a RISC-V Board compatible with the the SiFive Freedom U SDK.
The following machine is implemented:
- 'sifive_u'; CLINT, PLIC, UART, device-tree
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
This provides a RISC-V Board compatible with the the SiFive Freedom E SDK.
The following machine is implemented:
- 'sifive_e'; CLINT, PLIC, UART, AON, GPIO, QSPI, PWM
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Simple model of the PRCI (Power, Reset, Clock, Interrupt) to emulate
register reads made by the SDK BSP.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
QEMU model of the UART on the SiFive E300 and U500 series SOCs.
BBL supports the SiFive UART for early console access via the SBI
(Supervisor Binary Interface) and the linux kernel SBI console.
The SiFive UART implements the pre qom legacy interface consistent
with the 16550a UART in 'hw/char/serial.c'.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
RISC-V machine with device-tree, 16550a UART and VirtIO MMIO.
The following machine is implemented:
- 'virt'; CLINT, PLIC, 16550A UART, VirtIO MMIO, device-tree
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Test finisher memory mapped device used to exit simulation.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
RISC-V machines compatble with Spike aka riscv-isa-sim, the RISC-V
Instruction Set Simulator. The following machines are implemented:
- 'spike_v1.9.1'; HTIF console, config-string, Privileged ISA Version 1.9.1
- 'spike_v1.10'; HTIF console, device-tree, Privileged ISA Version 1.10
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
The PLIC (Platform Level Interrupt Controller) device provides a
parameterizable interrupt controller based on SiFive's PLIC specification.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
The CLINT (Core Local Interruptor) device provides real-time clock, timer
and interprocessor interrupts based on SiFive's CLINT specification.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Holds the state of a heterogenous array of RISC-V hardware threads.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
HTIF (Host Target Interface) provides console emulation for QEMU. HTIF
allows identical copies of BBL (Berkeley Boot Loader) and linux to run
on both Spike and QEMU. BBL provides HTIF console access via the
SBI (Supervisor Binary Interface) and the linux kernel SBI console.
The HTIT chardev implements the pre qom legacy interface consistent
with the 16550a UART in 'hw/char/serial.c'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Stefan O'Rear <sorear2@gmail.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
The RISC-V HTIF (Host Target Interface) console device requires access
to the symbol table to locate the 'tohost' and 'fromhost' symbols.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
The RISC-V disassembler has no dependencies outside of the 'disas'
directory so it can be applied independently. The majority of the
disassembler is machine-generated from instruction set metadata:
- https://github.com/michaeljclark/riscv-meta
Expected checkpatch errors for consistency and brevity reasons:
ERROR: line over 90 characters
ERROR: trailing statements should be on next line
ERROR: space prohibited between function name and open parenthesis '('
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Clark <mjc@sifive.com>
address_space_read is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_read_full to address_space_read's constant size
fast path and address_space_read_full.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These accessors are called from inlined functions, and the call sequence
is much more expensive than just inlining the access. Move the
struct declaration to memory-internal.h so that exec.c and memory.c
can both use an inline function.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>