While working on the Tulip driver i tried to write some Teledisk images to
a floppy image which didn't work. Turned out that Teledisk checks the written
data by issuing a READ command to the FDC but running the DMA controller
in VERIFY mode. As we ignored the DMA request in that case, the DMA transfer
never finished, and Teledisk reported an error.
The i8257 spec says about verify transfers:
3) DMA verify, which does not actually involve the transfer of data. When an
8257 channel is in the DMA verify mode, it will respond the same as described
for transfer operations, except that no memory or I/O read/write control signals
will be generated.
Hervé proposed to remove all the dma_mode_ok stuff from fdc to have a more
clear boundary between DMA and FDC, so this patch also does that.
Suggested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
The given argument for this trace should be cqid, not sqid.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Message-Id: <20200324140646.8274-1-minwoo.im.dev@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While there, tidy up indentation, and add return just for consistency
and robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200313170517.22480-4-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[The "while there" cleanups squashed in]
Whenever an unsupported command is encountered, the current code
interprets each transferred byte as new command. Most of the time, those
'commands' are interpreted as new unknown commands. However, in rare
cases, it may be that for example address or length information
passed with the original command is by itself a valid command.
If that happens, the state machine may get completely confused and,
worst case, start writing data into the flash or even erase it.
To avoid the problem, transition into STATE_READING_DATA and keep
sending a value of 0 until the chip is deselected after encountering
an unsupported command.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When requesting JEDEC data using the JEDEC_READ command, the Linux kernel
always requests 6 bytes. The current implementation only returns three
bytes, and interprets the remaining three bytes as new commands.
While this does not matter most of the time, it is at the very least
confusing. To avoid the problem, always report up to 6 bytes of JEDEC
data. Fill remaining data with 0.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it, add some trace messages to help debug problems
seen when running the latest Linux kernel.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.
'props' is still accepted after this patch, but marked as deprecated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* fix for xen-block
* fix in exec.c for migration of xen guest
* one cleanup patch
-----BEGIN PGP SIGNATURE-----
iQFOBAABCgA4FiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAl5XrpgaHGFudGhvbnku
cGVyYXJkQGNpdHJpeC5jb20ACgkQDPVXL9f7Va88wQf/TcU/rOJSIlTzIoIktp+T
uvsb3+TkppdLBeFvAPAfKXFG8JxO7RHxtnn7pZFdlejqNG+AJhARd+LbQMPMO15d
cLo7Da5HE8ni9f+CwtY61SNS3qe1+8qoNRFwxeycA5pfr+XZb5dB8FYW4w5H4mg0
gyf4R0kb/5Y43K4FKEu/09rh3jtV1HqVfbjMrk3u82sex5gp3LT9kg6VJyrGE3rr
D/rmVOM1+rEn8S9e5YG1YqBq1HRSMAbrQ3kvkCJPHE+vLnmkbITyi9faL99vR3Pl
oTtmnwNWUwYzf/FwAA+8/YaaAsEz17KQXOQtFxIC+j9im2KkE5waD15AfEJ5eQgW
EA==
=sKMx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20200227' into staging
Xen queue 2020-02-27
* fix for xen-block
* fix in exec.c for migration of xen guest
* one cleanup patch
# gpg: Signature made Thu 27 Feb 2020 11:57:12 GMT
# gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8
# Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF
* remotes/aperard/tags/pull-xen-20200227:
Memory: Only call ramblock_ptr when needed in qemu_ram_writeback
xen-bus/block: explicitly assign event channels to an AioContext
hw/xen/xen_pt_load_rom: Remove unused includes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is not safe to close an event channel from the QEMU main thread when
that channel's poller is running in IOThread context.
This patch adds a new xen_device_set_event_channel_context() function
to explicitly assign the channel AioContext, and modifies
xen_device_bind_event_channel() to initially assign the channel's poller
to the QEMU main thread context. The code in xen-block's dataplane is
then modified to assign the channel to IOThread context during
xen_block_dataplane_start() and de-assign it during in
xen_block_dataplane_stop(), such that the channel is always assigned
back to main thread context before it is closed. aio_set_fd_handler()
already deals with all the necessary synchronization when moving an fd
between AioContext-s so no extra code is needed to manage this.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20191216143451.19024-1-pdurrant@amazon.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
use the new virtio_delete_queue function to cleanup.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200224041336.30790-3-pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio queues forgot to delete in unrealize, and aslo error path in
realize, this patch fix these memleaks, the leak stack is as follow:
Direct leak of 114688 byte(s) in 16 object(s) allocated from:
#0 0x7f24024fdbf0 in calloc (/lib64/libasan.so.3+0xcabf0)
#1 0x7f2401642015 in g_malloc0 (/lib64/libglib-2.0.so.0+0x50015)
#2 0x55ad175a6447 in virtio_add_queue /mnt/sdb/qemu/hw/virtio/virtio.c:2327
#3 0x55ad17570cf9 in vhost_user_blk_device_realize /mnt/sdb/qemu/hw/block/vhost-user-blk.c:419
#4 0x55ad175a3707 in virtio_device_realize /mnt/sdb/qemu/hw/virtio/virtio.c:3509
#5 0x55ad176ad0d1 in device_set_realized /mnt/sdb/qemu/hw/core/qdev.c:876
#6 0x55ad1781ff9d in property_set_bool /mnt/sdb/qemu/qom/object.c:2080
#7 0x55ad178245ae in object_property_set_qobject /mnt/sdb/qemu/qom/qom-qobject.c:26
#8 0x55ad17821eb4 in object_property_set_bool /mnt/sdb/qemu/qom/object.c:1338
#9 0x55ad177aeed7 in virtio_pci_realize /mnt/sdb/qemu/hw/virtio/virtio-pci.c:1801
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200224041336.30790-2-pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The goal is to reduce the amount of requests issued by a guest on
1M reads/writes. This rises the performance up to 4% on that kind of
disk access pattern.
The maximum chunk size to be used for the guest disk accessing is
limited with seg_max parameter, which represents the max amount of
pices in the scatter-geather list in one guest disk request.
Since seg_max is virqueue_size dependent, increasing the virtqueue
size increases seg_max, which, in turn, increases the maximum size
of data to be read/write from a guest disk.
More details in the original problem statment:
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-id: 20200214074648.958-1-dplotnikov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix warning reported by Clang static code analyzer:
CC hw/block/pflash_cfi02.o
hw/block/pflash_cfi02.c:311:5: warning: Value stored to 'ret' is never read
ret = -1;
^ ~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-4-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl4TaMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpvzgH/2LyDAzCa9h93ikSJjmyUk5FUaqve38daEb3
S3JYjwKxQx7u1ydooKhvBQnBCZ2i3S+k62gfYyKB+nBv8xvjs0Eg5D1YJ5E8hciy
lf5OFGWWtX2iPDjZwQwT13kiJe0o3JRGxJJ6XqTEG+1EYOp7cky/FEv4PD030b9m
I2wROZ/Am+onB9YJX8c0Vv1CG+AryuJNXnvwQzTXEjj4U7bEYUyJwVZaCRyAdWQ3
uYXIZN9VwjVX6BFvy9ZAJbEsUVJvOM1/aQaDqcrLz+VlzRT7bRkKHi2G3vakrm1I
r5OpgyLo84132awCncbSykKDH5o8WaxLaJBjGmuBfasMz9wPzAg=
=uL1o
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: fixes, features
Bugfixes all over the place.
HMAT support.
New flags for vhost-user-blk utility.
Auto-tuning of seg max for virtio storage.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (32 commits)
intel_iommu: add present bit check for pasid table entries
intel_iommu: a fix to vtd_find_as_from_bus_num()
virtio-net: delete also control queue when TX/RX deleted
virtio: reset region cache when on queue deletion
virtio-mmio: update queue size on guest write
tests: add virtio-scsi and virtio-blk seg_max_adjust test
virtio: make seg_max virtqueue size dependent
hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35
vhost-user-scsi: reset the device if supported
vhost-user: add VHOST_USER_RESET_DEVICE to reset devices
hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument
hw/pci/pci_host: Remove redundant PCI_DPRINTF()
virtio-mmio: Clear v2 transport state on soft reset
ACPI: add expected files for HMAT tests (acpihmat)
tests/bios-tables-test: add test cases for ACPI HMAT
tests/numa: Add case for QMP build HMAT
hmat acpi: Build Memory Side Cache Information Structure(s)
hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)
hmat acpi: Build Memory Proximity Domain Attributes Structure(s)
numa: Extend CLI to provide memory side cache information
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC s390x-softmmu/hw/block/vhost-user-blk.o
hw/block/vhost-user-blk.c: In function ‘vhost_user_blk_event’:
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
370 | switch (event) {
| ^~~~~~
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before the patch, seg_max parameter was immutable and hardcoded
to 126 (128 - 2) without respect to queue size. This has two negative effects:
1. when queue size is < 128, we have Virtio 1.1 specfication violation:
(2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size.
This violation affects the old Linux guests (ver < 4.14). These guests
crash on these queue_size setups.
2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>,
seg_max restrics guest's block request length which affects guests'
performance making them issues more block request than needed.
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
To mitigate this two effects, the patch adds the property adjusting seg_max
to queue size automaticaly. Since seg_max is a guest visible parameter,
the property is machine type managable and allows to choose between
old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors.
Not to change the behavior of the older VMs, prevent setting the default
seg_max_adjust value for older machine types.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace DeviceState dependency with VMStateIf on vmstate API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Virtqueue notifications are not necessary during polling, so we disable
them. This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.
Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled. The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.
There is a measurable performance improvement of 5-10% with the null-co
block driver. Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the number of a virtio-blk device's virtqueues is larger than
BITS_PER_LONG, the out-of-bounds access to bitmap[ ] will occur.
Fixes: e21737ab15 ("virtio-blk: multiqueue batch notify")
Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li Hangjing <lihangjing@baidu.com>
Reviewed-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Chai Wen <chaiwen@baidu.com>
Message-id: 20191216023050.48620-1-lihangjing@baidu.com
Message-Id: <20191216023050.48620-1-lihangjing@baidu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device
Initialization:
"Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if
they offer VIRTIO_BLK_F_CONFIG_WCE"
Currently F_CONFIG_WCE and F_WCE are not connected to each other.
Qemu will advertise F_CONFIG_WCE if config-wce argument is
set for virtio-blk device. And F_WCE is advertised only if
underlying block backend actually has it's caching enabled.
Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised.
To preserve backwards compatibility with newer machine types make this
behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device
property and introduce hw_compat_4_2 with new property being off by
default for all machine types <= 4.2 (but don't introduce 4.3
machine type itself yet).
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since not all trace backends support dynamic field width in
format (dtrace via stap does not), replace by a static field
width instead.
We previously passed to the trace API 'width << 1' as the number
of hex characters to display (the dynamic field width). We don't
need this anymore. Instead, display the size of bytes accessed.
Fixes: e8aa2d95ea ("pflash: Simplify trace_pflash_io_read/write")
Fixes: c1474acd5d ("pflash: Simplify trace_pflash_data_read/write")
Reported-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://bugs.launchpad.net/qemu/+bug/1844817
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Relevant devices are:
* ide-hd (and ide-cd, ide-drive)
* scsi-hd (and scsi-cd, scsi-disk, scsi-block)
* virtio-blk-pci
We do not call del_boot_device_lchs() for ide-* since we don't need to -
IDE block devices do not support unplugging.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of
the 680x0 Macintosh.
This patch introduces only the basic support: it allows to switch from
IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux
driver happy.
It cannot read any floppy image.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdsuDvAAoJECgfDbjSjVRpIP8H/3rHSvZ5+MQGCFLI5GU8m3za
JSOaBSmtcj9KwrpibBfptSCJZNrG8EUVHyo+Z+pvGohXqDB8h9RyBfb6vID8jqzC
5wIzlNBP27F668MUBt2t7xSwK0PWO1QOpEKk6S4SJMpl51ea8ePlTH0jnLVfkaAN
hFKU1wqwc2gMyF9rDjOZ6I+OO1iQbMcrsazFrCXECXCkxDcJM0ey7MheKxVntTjt
0sxFHM2I1A+vXtAzlLo6rS3I9vJ0ATfLfOlZLqrq5uSAL5FKrqsbmGh4sAsFTQAA
eerR6zDz3X+YqfQaVgVk2wixPHQz2w8Rv68j6SiGrdZ29/JT6nVWHT8cGtPsX4c=
=iJuG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio: features, tests
libqos update with support for virtio 1.
Packed ring support for virtio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 25 Oct 2019 12:47:59 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (25 commits)
virtio: drop unused virtio_device_stop_ioeventfd() function
libqos: add VIRTIO PCI 1.0 support
libqos: extract Legacy virtio-pci.c code
libqos: make the virtio-pci BAR index configurable
libqos: expose common virtqueue setup/cleanup functions
libqos: add MSI-X callbacks to QVirtioPCIDevice
libqos: pass full QVirtQueue to set_queue_address()
libqos: add iteration support to qpci_find_capability()
libqos: access VIRTIO 1.0 vring in little-endian
libqos: implement VIRTIO 1.0 FEATURES_OK step
libqos: enforce Device Initialization order
libqos: add missing virtio-9p feature negotiation
tests/virtio-blk-test: set up virtqueue after feature negotiation
virtio-scsi-test: add missing feature negotiation
libqos: extend feature bits to 64-bit
libqos: read QVIRTIO_MMIO_VERSION register
tests/virtio-blk-test: read config space after feature negotiation
virtio: add property to enable packed virtqueue
vhost_net: enable packed ring support
virtio: event suppression support for packed ring
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
endof() is a useful macro, we can make use of it outside of virtio.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191011152814.14791-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
QEMU does not wait for completed I/O requests, assuming that the guest
driver will reset the device before calling unrealize(). This does not
happen on Windows, and QEMU crashes in virtio_notify(), getting the
result of a completed I/O request on hot-unplugged device.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20191018142856.31870-1-jusual@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch implements basic support for the packed virtqueue. Compare
the split virtqueue which has three rings, packed virtqueue only have
one which is supposed to have better cache utilization and more
hardware friendly.
Please refer virtio specification for more information.
Signed-off-by: Wei Xu <wexu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function virtio_del_queue was not called at unrealize() callback.
This was detected due to add an allocated element on the vq introduce
in future commits (used_elems) and running address sanitizer memory
leak detector.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20191025083527.30803-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-20-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio_notify_config() needs to acquire the global mutex, which isn't
allowed from an iothread, and may lead to a deadlock like this:
- main thead
* Has acquired: qemu_global_mutex.
* Is trying the acquire: iothread AioContext lock via
AIO_WAIT_WHILE (after aio_poll).
- iothread
* Has acquired: AioContext lock.
* Is trying to acquire: qemu_global_mutex (via
virtio_notify_config->prepare_mmio_access).
If virtio_blk_resize() is called from an iothread, schedule
virtio_notify_config() to be run in the main context BH.
[Removed unnecessary newline as suggested by Kevin Wolf
<kwolf@redhat.com>.
--Stefan]
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20190916112411.21636-1-slp@redhat.com
Message-Id: <20190916112411.21636-1-slp@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a frontend gracefully disconnects from an offline backend, it will
set its own state to XenbusStateClosed. The code in xen-block.c correctly
deals with this and sets the backend into XenbusStateClosed. Unfortunately
it is possible for toolstack to actually delete the frontend area
before the state key has been read, leading to an apparent frontend state
of XenbusStateUnknown. This prevents the backend state from transitioning
to XenbusStateClosed and hence leaves it limbo.
This patch simply treats a frontend state of XenbusStateUnknown the same
as XenbusStateClosed, which will unblock the backend in these circumstances.
Reported-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20190918115702.38959-1-paul.durrant@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Same rational as: e6cc11d64f
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
This has already been fixed for vhost scsi devices and was
recently vhost-user scsi devices. This commit fixes it for
vhost-user-blk devices.
Suggested-by: Phillippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1566498865-55506-1-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When 'system_reset' is called, the main loop clear the memory
region cache before the BH has a chance to execute. Later when
the deferred function is called, some assumptions that were
made when scheduling them are no longer true when they actually
execute.
This is what happens using a virtio-blk device (fresh RHEL7.8 install):
$ (sleep 12.3; echo system_reset; sleep 12.3; echo system_reset; sleep 1; echo q) \
| qemu-system-x86_64 -m 4G -smp 8 -boot menu=on \
-device virtio-blk-pci,id=image1,drive=drive_image1 \
-drive file=/var/lib/libvirt/images/rhel78.qcow2,if=none,id=drive_image1,format=qcow2,cache=none \
-device virtio-net-pci,netdev=net0,id=nic0,mac=52:54:00:c4:e7:84 \
-netdev tap,id=net0,script=/bin/true,downscript=/bin/true,vhost=on \
-monitor stdio -serial null -nographic
(qemu) system_reset
(qemu) system_reset
(qemu) qemu-system-x86_64: hw/virtio/virtio.c:225: vring_get_region_caches: Assertion `caches != NULL' failed.
Aborted
(gdb) bt
Thread 1 (Thread 0x7f109c17b680 (LWP 10939)):
#0 0x00005604083296d1 in vring_get_region_caches (vq=0x56040a24bdd0) at hw/virtio/virtio.c:227
#1 0x000056040832972b in vring_avail_flags (vq=0x56040a24bdd0) at hw/virtio/virtio.c:235
#2 0x000056040832d13d in virtio_should_notify (vdev=0x56040a240630, vq=0x56040a24bdd0) at hw/virtio/virtio.c:1648
#3 0x000056040832d1f8 in virtio_notify_irqfd (vdev=0x56040a240630, vq=0x56040a24bdd0) at hw/virtio/virtio.c:1662
#4 0x00005604082d213d in notify_guest_bh (opaque=0x56040a243ec0) at hw/block/dataplane/virtio-blk.c:75
#5 0x000056040883dc35 in aio_bh_call (bh=0x56040a243f10) at util/async.c:90
#6 0x000056040883dccd in aio_bh_poll (ctx=0x560409161980) at util/async.c:118
#7 0x0000560408842af7 in aio_dispatch (ctx=0x560409161980) at util/aio-posix.c:460
#8 0x000056040883e068 in aio_ctx_dispatch (source=0x560409161980, callback=0x0, user_data=0x0) at util/async.c:261
#9 0x00007f10a8fca06d in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#10 0x0000560408841445 in glib_pollfds_poll () at util/main-loop.c:215
#11 0x00005604088414bf in os_host_main_loop_wait (timeout=0) at util/main-loop.c:238
#12 0x00005604088415c4 in main_loop_wait (nonblocking=0) at util/main-loop.c:514
#13 0x0000560408416b1e in main_loop () at vl.c:1923
#14 0x000056040841e0e8 in main (argc=20, argv=0x7ffc2c3f9c58, envp=0x7ffc2c3f9d00) at vl.c:4578
Fix this by cancelling the BH when the virtio dataplane is stopped.
[This is version of the patch was modified as discussed with Philippe on
the mailing list thread.
--Stefan]
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1839428
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190816171503.24761-1-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests
-----BEGIN PGP SIGNATURE-----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=T7L5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests
# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
