Controller reset ans subsystem shutdown are handled very much the same
in the current code, but some of the steps should be different in these
two cases.
Introduce two new functions, nvme_reset_ctrl() and nvme_shutdown_ctrl(),
to separate some portions of the code from nvme_clear_ctrl(). The steps
that are made different between reset and shutdown are that BAR.CC is not
reset to zero upon the shutdown and namespace data is flushed to
backing storage as a part of shutdown handling, but not upon reset.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Commit 37712e00b1 ("hw/block/nvme: factor out pmr setup") changed the
control flow such that the CAP register is erronously cleared after
nvme_init_pmr() has configured it. Since the entire NvmeCtrl structure
is zero-filled initially, there is no need for the explicit clearing, so
just remove it.
Fixes: 37712e00b1 ("hw/block/nvme: factor out pmr setup")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Add the Compare command.
This implementation uses a bounce buffer to read in the data from
storage and then compare with the host supplied buffer.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for the Dataset Management command and the Deallocate
attribute. Deallocation results in discards being sent to the underlying
block device. Whether of not the blocks are actually deallocated is
affected by the same factors as Write Zeroes (see previous commit).
format | discard | dsm (512B) dsm (4KiB) dsm (64KiB)
--------------------------------------------------------
qcow2 ignore n n n
qcow2 unmap n n y
raw ignore n n n
raw unmap n y y
Again, a raw format and 4KiB LBAs are preferable.
In order to set the Namespace Preferred Deallocate Granularity and
Alignment fields (NPDG and NPDA), choose a sane minimum discard
granularity of 4KiB. If we are using a passthru device supporting
discard at a 512B granularity, user should set the discard_granularity
property explicitly. NPDG and NPDA will also account for the
cluster_size of the block driver if required (i.e. for QCOW2).
See NVM Express 1.3d, Section 6.7 ("Dataset Management command").
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for reporting the Deallocated or Unwritten Logical Block
Error (DULBE).
Rely on the block status flags reported by the block layer and consider
any block with the BDRV_BLOCK_ZERO flag to be deallocated.
Multiple factors affect when a Write Zeroes command result in
deallocation of blocks.
* the underlying file system block size
* the blockdev format
* the 'discard' and 'logical_block_size' parameters
format | discard | wz (512B) wz (4KiB) wz (64KiB)
-----------------------------------------------------
qcow2 ignore n n y
qcow2 unmap n n y
raw ignore n y y
raw unmap n y y
So, this works best with an image in raw format and 4KiB LBAs, since
holes can then be punched on a per-block basis (this assumes a file
system with a 4kb block size, YMMV). A qcow2 image, uses a cluster size
of 64KiB by default and blocks will only be marked deallocated if a full
cluster is zeroed or discarded. However, this *is* consistent with the
spec since Write Zeroes "should" deallocate the block if the Deallocate
attribute is set and "may" deallocate if the Deallocate attribute is not
set. Thus, we always try to deallocate (the BDRV_REQ_MAY_UNMAP flag is
always set).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add a new function, nvme_aio_err, to handle errors resulting from AIOs
and use this from the callbacks.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
nvme_check_bounds has no use of the NvmeCtrl parameter; remove it.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.
This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option. s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).
To integrate this with the option used by other platforms, we
implement the following compromise:
- When the confidential-guest-support option is set, s390 will
recognize it, verify that the CPU can support PV (failing if not)
and set virtio default options necessary for encrypted or protected
guests, as on other platforms. i.e. if confidential-guest-support
is set, we will either create a guest capable of entering PV mode,
or fail outright.
- If confidential-guest-support is not set, guests might still be
able to enter PV mode, if the CPU has the right model. This may be
a little surprising, but shouldn't actually be harmful.
To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
-object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The default behaviour for virtio devices is not to use the platforms normal
DMA paths, but instead to use the fact that it's running in a hypervisor
to directly access guest memory. That doesn't work if the guest's memory
is protected from hypervisor access, such as with AMD's SEV or POWER's PEF.
So, if a confidential guest mechanism is enabled, then apply the
iommu_platform=on option so it will go through normal DMA mechanisms.
Those will presumably have some way of marking memory as shared with
the hypervisor or hardware so that DMA will work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
We haven't yet implemented the fairly involved handshaking that will be
needed to migrate PEF protected guests. For now, just use a migration
blocker so we get a meaningful error if someone attempts this (this is the
same approach used by AMD SEV).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Some upcoming POWER machines have a system called PEF (Protected
Execution Facility) which uses a small ultravisor to allow guests to
run in a way that they can't be eavesdropped by the hypervisor. The
effect is roughly similar to AMD SEV, although the mechanisms are
quite different.
Most of the work of this is done between the guest, KVM and the
ultravisor, with little need for involvement by qemu. However qemu
does need to tell KVM to allow secure VMs.
Because the availability of secure mode is a guest visible difference
which depends on having the right hardware and firmware, we don't
enable this by default. In order to run a secure guest you need to
create a "pef-guest" object and set the confidential-guest-support
property to point to it.
Note that this just *allows* secure guests, the architecture of PEF is
such that the guest still needs to talk to the ultravisor to enter
secure mode. Qemu has no direct way of knowing if the guest is in
secure mode, and certainly can't know until well after machine
creation time.
To start a PEF-capable guest, use the command line options:
-object pef-guest,id=pef0 -machine confidential-guest-support=pef0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently the "memory-encryption" property is only looked at once we
get to kvm_init(). Although protection of guest memory from the
hypervisor isn't something that could really ever work with TCG, it's
not conceptually tied to the KVM accelerator.
In addition, the way the string property is resolved to an object is
almost identical to how a QOM link property is handled.
So, create a new "confidential-guest-support" link property which sets
this QOM interface link directly in the machine. For compatibility we
keep the "memory-encryption" property, but now implemented in terms of
the new property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When the "memory-encryption" property is set, we also disable KSM
merging for the guest, since it won't accomplish anything.
We want that, but doing it in the property set function itself is
thereoretically incorrect, in the unlikely event of some configuration
environment that set the property then cleared it again before
constructing the guest.
More importantly, it makes some other cleanups we want more difficult.
So, instead move this logic to machine_run_board_init() conditional on
the final value of the property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
When AMD's SEV memory encryption is in use, flash memory banks (which are
initialed by pc_system_flash_map()) need to be encrypted with the guest's
key, so that the guest can read them.
That's abstracted via the kvm_memcrypt_encrypt_data() callback in the KVM
state.. except, that it doesn't really abstract much at all.
For starters, the only call site is in code specific to the 'pc'
family of machine types, so it's obviously specific to those and to
x86 to begin with. But it makes a bunch of further assumptions that
need not be true about an arbitrary confidential guest system based on
memory encryption, let alone one based on other mechanisms:
* it assumes that the flash memory is defined to be encrypted with the
guest key, rather than being shared with hypervisor
* it assumes that that hypervisor has some mechanism to encrypt data into
the guest, even though it can't decrypt it out, since that's the whole
point
* the interface assumes that this encrypt can be done in place, which
implies that the hypervisor can write into a confidential guests's
memory, even if what it writes isn't meaningful
So really, this "abstraction" is actually pretty specific to the way SEV
works. So, this patch removes it and instead has the PC flash
initialization code call into a SEV specific callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 568496c0c0 ("cpu: Add callback to check architectural") and
commit 3826121d92 ("target-arm: Implement checking of fired")
introduced an ARM-specific hack for cpu_check_watchpoint.
Make debug_check_watchpoint optional, and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-15-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
commit 4061200059 ("arm: Correctly handle watchpoints for BE32 CPUs")
introduced this ARM-specific, TCG-specific hack to adjust the address,
before checking it with cpu_check_watchpoint.
Make adjust_watchpoint_address optional and move it to tcg_ops.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-14-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
move away TCG-only code, make it compile only on TCG.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: moved the prototypes from hw/core/cpu.h to exec/cpu-all.h]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-4-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
gcc is not smart enough to figure out length was validated before use as
strncpy limit, resulting in this warning:
inlined from ‘virt_set_oem_table_id’ at ../../hw/arm/virt.c:2197:5:
/usr/include/aarch64-linux-gnu/bits/string_fortified.h:106:10: error:
‘__builtin_strncpy’ specified bound depends on the length of the
source argument [-Werror=stringop-overflow=]
Simplify things by using a constant limit instead.
Fixes: 97fc5d507fca ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table name.
Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID
and OEM table ID for the strings "BOCHS" and "BXPC" and if they are
found, the game crashes(this may be an intentional detection
mechanism to prevent playing the game in a virtualized environment).
This patch allows you to override these default values.
The feature can be used in this manner:
qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN
The oem-id string can be up to 6 bytes in size, and the
oem-table-id string can be up to 8 bytes in size. If the string are
smaller than their respective sizes they will be padded with space.
If either of these parameters is not set, the current default values
will be used for the one missing.
Note that the the OEM Table ID field will not be extended with the
name of the table, but will use either the default name or the user
provided one.
This does not affect the -acpitable option (for user-defined ACPI
tables), which has precedence over -machine option.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-3-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not checking this can lead to invalid dev->vdev member access in
vhost_device_iotlb_miss if backend issue an iotlb message in a bad
timing, either maliciously or by a bug.
Reproduced rebooting a guest with testpmd in txonly forward mode.
#0 0x0000559ffff94394 in vhost_device_iotlb_miss (
dev=dev@entry=0x55a0012f6680, iova=10245279744, write=1)
at ../hw/virtio/vhost.c:1013
#1 0x0000559ffff9ac31 in vhost_backend_handle_iotlb_msg (
imsg=0x7ffddcfd32c0, dev=0x55a0012f6680)
at ../hw/virtio/vhost-backend.c:411
#2 vhost_backend_handle_iotlb_msg (dev=dev@entry=0x55a0012f6680,
imsg=imsg@entry=0x7ffddcfd32c0)
at ../hw/virtio/vhost-backend.c:404
#3 0x0000559fffeded7b in slave_read (opaque=0x55a0012f6680)
at ../hw/virtio/vhost-user.c:1464
#4 0x000055a0000c541b in aio_dispatch_handler (
ctx=ctx@entry=0x55a0010a2120, node=0x55a0012d9e00)
at ../util/aio-posix.c:329
Fixes: 020e571b8b ("vhost: rework IOTLB messaging")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210129090728.831208-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property was only required for compatibility reasons in the
pc-1.0 machine type and earlier. Now that these machine types have
been removed, the property is not useful anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210203171832.483176-4-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
They have been deprecated since QEMU v5.0, time to remove them now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210203171832.483176-2-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Previous work on dev-iotlb message broke vhost on either SMMU or virtio-iommu
since dev-iotlb (or PCIe ATS) is not yet supported for those archs.
An initial idea is that we can let IOMMU to export this information to vhost so
that vhost would know whether the vIOMMU would support dev-iotlb, then vhost
can conditionally register to dev-iotlb or the old iotlb way. We can work
based on some previous patch to introduce PCIIOMMUOps as Yi Liu proposed [1].
However it's not as easy as I thought since vhost_iommu_region_add() does not
have a PCIDevice context at all since it's completely a backend. It seems
non-trivial to pass over a PCI device to the backend during init. E.g. when
the IOMMU notifier registered hdev->vdev is still NULL.
To make the fix smaller and easier, this patch goes the other way to leverage
the flag_changed() hook of vIOMMUs so that SMMU and virtio-iommu can trap the
dev-iotlb registration and fail it. Then vhost could try the fallback solution
as using UNMAP invalidation for it's translations.
[1] https://lore.kernel.org/qemu-devel/1599735398-6829-4-git-send-email-yi.l.liu@intel.com/
Reported-by: Eric Auger <eric.auger@redhat.com>
Fixes: b68ba1ca57
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210204191228.187550-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds trace events for virtio-pmem functionality.
Adding trace events for virtio pmem request, reponse and host
side fsync functionality.
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Message-Id: <20201117115705.32195-1-pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address space is destroyed without proper removal of its listeners with
current code. They are expected to be removed in
virtio_device_instance_finalize [1], but qemu calls it through
object_deinit, after address_space_destroy call through
device_set_realized [2].
Move it to virtio_device_unrealize, called before device_set_realized
[3] and making it symmetric with memory_listener_register in
virtio_device_realize.
v2: Delete no-op call of virtio_device_instance_finalize.
Add backtraces.
[1]
#0 virtio_device_instance_finalize (obj=0x555557de5120)
at /home/qemu/include/hw/virtio/virtio.h:71
#1 0x0000555555b703c9 in object_deinit (type=0x555556639860,
obj=<optimized out>) at ../qom/object.c:671
#2 object_finalize (data=0x555557de5120) at ../qom/object.c:685
#3 object_unref (objptr=0x555557de5120) at ../qom/object.c:1184
#4 0x0000555555b4de9d in bus_free_bus_child (kid=0x555557df0660)
at ../hw/core/qdev.c:55
#5 0x0000555555c65003 in call_rcu_thread (opaque=opaque@entry=0x0)
at ../util/rcu.c:281
Queued by:
#0 bus_remove_child (bus=0x555557de5098,
child=child@entry=0x555557de5120) at ../hw/core/qdev.c:60
#1 0x0000555555b4ee31 in device_unparent (obj=<optimized out>)
at ../hw/core/qdev.c:984
#2 0x0000555555b70465 in object_finalize_child_property (
obj=<optimized out>, name=<optimized out>, opaque=0x555557de5120)
at ../qom/object.c:1725
#3 0x0000555555b6fa17 in object_property_del_child (
child=0x555557de5120, obj=0x555557ddcf90) at ../qom/object.c:645
#4 object_unparent (obj=0x555557de5120) at ../qom/object.c:664
#5 0x0000555555b4c071 in bus_unparent (obj=<optimized out>)
at ../hw/core/bus.c:147
#6 0x0000555555b70465 in object_finalize_child_property (
obj=<optimized out>, name=<optimized out>, opaque=0x555557de5098)
at ../qom/object.c:1725
#7 0x0000555555b6fa17 in object_property_del_child (
child=0x555557de5098, obj=0x555557ddcf90) at ../qom/object.c:645
#8 object_unparent (obj=0x555557de5098) at ../qom/object.c:664
#9 0x0000555555b4ee19 in device_unparent (obj=<optimized out>)
at ../hw/core/qdev.c:981
#10 0x0000555555b70465 in object_finalize_child_property (
obj=<optimized out>, name=<optimized out>, opaque=0x555557ddcf90)
at ../qom/object.c:1725
#11 0x0000555555b6fa17 in object_property_del_child (
child=0x555557ddcf90, obj=0x55555685da10) at ../qom/object.c:645
#12 object_unparent (obj=0x555557ddcf90) at ../qom/object.c:664
#13 0x00005555558dc331 in pci_for_each_device_under_bus (
opaque=<optimized out>, fn=<optimized out>, bus=<optimized out>)
at ../hw/pci/pci.c:1654
[2]
Optimizer omits pci_qdev_unrealize, called by device_set_realized, and
do_pci_unregister_device, called by pci_qdev_unrealize and caller of
address_space_destroy.
#0 address_space_destroy (as=0x555557ddd1b8)
at ../softmmu/memory.c:2840
#1 0x0000555555b4fc53 in device_set_realized (obj=0x555557ddcf90,
value=<optimized out>, errp=0x7fffeea8f1e0)
at ../hw/core/qdev.c:850
#2 0x0000555555b6eaa6 in property_set_bool (obj=0x555557ddcf90,
v=<optimized out>, name=<optimized out>, opaque=0x555556650ba0,
errp=0x7fffeea8f1e0) at ../qom/object.c:2255
#3 0x0000555555b70e07 in object_property_set (
obj=obj@entry=0x555557ddcf90,
name=name@entry=0x555555db99df "realized",
v=v@entry=0x7fffe46b7500,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1400
#4 0x0000555555b73c5f in object_property_set_qobject (
obj=obj@entry=0x555557ddcf90,
name=name@entry=0x555555db99df "realized",
value=value@entry=0x7fffe44f6180,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/qom-qobject.c:28
#5 0x0000555555b71044 in object_property_set_bool (
obj=0x555557ddcf90, name=0x555555db99df "realized",
value=<optimized out>, errp=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1470
#6 0x0000555555921cb7 in pcie_unplug_device (bus=<optimized out>,
dev=0x555557ddcf90,
opaque=<optimized out>) at /home/qemu/include/hw/qdev-core.h:17
#7 0x00005555558dc331 in pci_for_each_device_under_bus (
opaque=<optimized out>, fn=<optimized out>,
bus=<optimized out>) at ../hw/pci/pci.c:1654
[3]
#0 virtio_device_unrealize (dev=0x555557de5120)
at ../hw/virtio/virtio.c:3680
#1 0x0000555555b4fc63 in device_set_realized (obj=0x555557de5120,
value=<optimized out>, errp=0x7fffee28df90)
at ../hw/core/qdev.c:850
#2 0x0000555555b6eab6 in property_set_bool (obj=0x555557de5120,
v=<optimized out>, name=<optimized out>, opaque=0x555556650ba0,
errp=0x7fffee28df90) at ../qom/object.c:2255
#3 0x0000555555b70e17 in object_property_set (
obj=obj@entry=0x555557de5120,
name=name@entry=0x555555db99ff "realized",
v=v@entry=0x7ffdd8035040,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1400
#4 0x0000555555b73c6f in object_property_set_qobject (
obj=obj@entry=0x555557de5120,
name=name@entry=0x555555db99ff "realized",
value=value@entry=0x7ffdd8035020,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/qom-qobject.c:28
#5 0x0000555555b71054 in object_property_set_bool (
obj=0x555557de5120, name=name@entry=0x555555db99ff "realized",
value=value@entry=false, errp=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1470
#6 0x0000555555b4edc5 in qdev_unrealize (dev=<optimized out>)
at ../hw/core/qdev.c:403
#7 0x0000555555b4c2a9 in bus_set_realized (obj=<optimized out>,
value=<optimized out>, errp=<optimized out>)
at ../hw/core/bus.c:204
#8 0x0000555555b6eab6 in property_set_bool (obj=0x555557de5098,
v=<optimized out>, name=<optimized out>, opaque=0x555557df04c0,
errp=0x7fffee28e0a0) at ../qom/object.c:2255
#9 0x0000555555b70e17 in object_property_set (
obj=obj@entry=0x555557de5098,
name=name@entry=0x555555db99ff "realized",
v=v@entry=0x7ffdd8034f50,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1400
#10 0x0000555555b73c6f in object_property_set_qobject (
obj=obj@entry=0x555557de5098,
name=name@entry=0x555555db99ff "realized",
value=value@entry=0x7ffdd8020630,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/qom-qobject.c:28
#11 0x0000555555b71054 in object_property_set_bool (
obj=obj@entry=0x555557de5098,
name=name@entry=0x555555db99ff "realized",
value=value@entry=false, errp=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1470
#12 0x0000555555b4c725 in qbus_unrealize (
bus=bus@entry=0x555557de5098) at ../hw/core/bus.c:178
#13 0x0000555555b4fc00 in device_set_realized (obj=0x555557ddcf90,
value=<optimized out>, errp=0x7fffee28e1e0)
at ../hw/core/qdev.c:844
#14 0x0000555555b6eab6 in property_set_bool (obj=0x555557ddcf90,
v=<optimized out>, name=<optimized out>, opaque=0x555556650ba0,
errp=0x7fffee28e1e0) at ../qom/object.c:2255
#15 0x0000555555b70e17 in object_property_set (
obj=obj@entry=0x555557ddcf90,
name=name@entry=0x555555db99ff "realized",
v=v@entry=0x7ffdd8020560,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1400
#16 0x0000555555b73c6f in object_property_set_qobject (
obj=obj@entry=0x555557ddcf90,
name=name@entry=0x555555db99ff "realized",
value=value@entry=0x7ffdd8020540,
errp=errp@entry=0x5555565bbf38 <error_abort>)
at ../qom/qom-qobject.c:28
#17 0x0000555555b71054 in object_property_set_bool (
obj=0x555557ddcf90, name=0x555555db99ff "realized",
value=<optimized out>, errp=0x5555565bbf38 <error_abort>)
at ../qom/object.c:1470
#18 0x0000555555921cb7 in pcie_unplug_device (bus=<optimized out>,
dev=0x555557ddcf90, opaque=<optimized out>)
at /home/qemu/include/hw/qdev-core.h:17
#19 0x00005555558dc331 in pci_for_each_device_under_bus (
opaque=<optimized out>, fn=<optimized out>, bus=<optimized out>)
at ../hw/pci/pci.c:1654
Fixes: c611c76417 ("virtio: add MemoryListener to cache ring translations")
Buglink: https://bugs.launchpad.net/qemu/+bug/1912846
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210125192505.390554-1-eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the kernel, virtio_gpu_init() uses virtio_get_shm_region()
since
commit 6076a9711dc5 ("drm/virtio: implement blob resources: probe for host visible region")
but vm_get_shm_region() unconditionally uses VIRTIO_MMIO_SHM_SEL to
get the address and the length of the region.
commit 38e895487afc ("virtio: Implement get_shm_region for MMIO transport"
As this is not implemented in QEMU, address and length are 0 and passed
as is to devm_request_mem_region() that triggers a crash:
[drm:virtio_gpu_init] *ERROR* Could not reserve host visible region
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
According to the comments in the kernel, a non existent shared region
has a length of (u64)-1.
This is what we return now with this patch to disable the region.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201220163539.2255963-1-laurent@vivier.eu>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 9d7bd0826f introduced a new 'use-disabled-flag' property
set to true by default.
To allow the migration, we set this property to false in the hw_compat,
but in the wrong place (hw_compat_4_1).
Since commit 9d7bd0826f was released with QEMU 5.0, we move
'use-disabled-flag' property to hw_compat_4_2, so 4.2 machine types
will have the pre-patch behavior and the migration can work.
The issue was discovered with vhost-vsock device and 4.2 machine
type without running any kernel in the VM:
$ qemu-4.2 -M pc-q35-4.2,accel=kvm \
-device vhost-vsock-pci,guest-cid=4 \
-monitor stdio -incoming tcp:0:3333
$ qemu-5.2 -M pc-q35-4.2,accel=kvm \
-device vhost-vsock-pci,guest-cid=3 \
-monitor stdio
(qemu) migrate -d tcp:0:3333
# qemu-4.2 output
qemu-system-x86_64: Failed to load virtio-vhost_vsock:virtio
qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:03.0/virtio-vhost_vsock'
qemu-system-x86_64: load of migration failed: No such file or directory
Reported-by: Jing Zhao <jinzhao@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1907255
Fixes: 9d7bd0826f ("virtio-pci: disable vring processing when bus-mastering is disabled")
Cc: mdroth@linux.vnet.ibm.com
CC: qemu-stable@nongnu.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210108171252.209502-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property can be useful for distros to set up known-good ROM sizes for
migration purposes. The VM will fail to start if the ROM is too large,
and migration compatibility will not be broken if the ROM is too small.
Note that even though romsize is a uint32_t, it has to be between 1
(because empty ROM files are not accepted, and romsize must be greater
than the file) and 2^31 (because values above are not powers of two and
are rejected).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201218182736.1634344-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210203131828.156467-3-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
get_image_size() returns an int64_t, which pci_add_option_rom() assigns
to an "int" without any range checking. A 32-bit BAR could be up to
2 GiB in size, so reject anything above it. In order to accomodate
a rounded-up size of 2 GiB, change pci_patch_ids's size argument
to unsigned.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210203131828.156467-2-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Displaying rendered resources requires blocking qemu GPU to avoid extra
framebuffer copies. For an external display, via Spice currently, there
is a callback to block/unblock the rendering in the same thread.
But with the vhost-user-gpu backend, the qemu process doesn't handle
the rendering itself, and the blocking callback isn't effective.
Instead, the backend must be notified when the display code is done.
Fix this by adding a new GraphicHwOps callback to indicate the GL state
is flushed, and we are done manipulating the shared GL resources. Call
it from gtk and spice display.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-19-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch will notify the GL context got flush, which will resume
the queue processing. However, if this happens within the caller
context, it will end up with a stack overflow flush/update loop.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-18-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Those flags can be used to express different requirements for the
display or other needs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-12-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This check is currently limited. It only is used by vhost-user-gpu (not
by vfio-display), and will print an error repeatedly during run-time.
We are going to dissociate the GL context from the
DisplayChangeListener, and listeners may come and go. The following
patches will address this differently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-10-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
EDID has been enabled by default, but the backend may not implement
it (such as the contrib backend). This results in extra warnings and
potentially other issues in the guest.
The option shouldn't probably have been added to VIRTIO_GPU_BASE, but
it's a bit too late now, report an error and disable EDID when it's
not available.
Fixes: 0a7196625 ("edid: flip the default to enabled")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210204105232.834642-2-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Asynchronous handlers may be waiting for the graphic_hw_update_done() to
be called in this case too.
Fixes: 4d6316218 ("console: add graphic_hw_update_done()")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210201201422.446552-3-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On secondary QXL devices, the console is only set on qxl.vga.con. But
graphic_hw_update_done() is called with qxl.ssd.dcl.con.
Like for primary QXL devices, set qxl.sdd.dcl.con = qxl.vga.con.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210201201422.446552-2-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201119025851.56487-1-alex.chen@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most of ARM machines display their CPU when QEMU list the available
machines (-M help). Some machines do not. Fix to unify the help
output.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a dependency XLNX_ZYNQMP -> PTIMER to fix:
/usr/bin/ld:
libcommon.fa.p/hw_net_can_xlnx-zynqmp-can.c.o: in function `xlnx_zynqmp_can_realize':
hw/net/can/xlnx-zynqmp-can.c:1082: undefined reference to `ptimer_init'
hw/net/can/xlnx-zynqmp-can.c:1085: undefined reference to `ptimer_transaction_begin'
hw/net/can/xlnx-zynqmp-can.c:1087: undefined reference to `ptimer_set_freq'
hw/net/can/xlnx-zynqmp-can.c:1088: undefined reference to `ptimer_set_limit'
hw/net/can/xlnx-zynqmp-can.c:1089: undefined reference to `ptimer_run'
hw/net/can/xlnx-zynqmp-can.c:1090: undefined reference to `ptimer_transaction_commit'
libcommon.fa.p/hw_net_can_xlnx-zynqmp-can.c.o:(.data.rel+0x2c8): undefined reference to `vmstate_ptimer'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Versal SoC instantiates the TYPE_XLNX_ZYNQMP_RTC object in
versal_create_rtc()(). Select CONFIG_XLNX_ZYNQMP to fix:
$ make check-qtest-aarch64
...
Running test qtest-aarch64/qom-test
qemu-system-aarch64: missing object type 'xlnx-zynmp.rtc'
Broken pipe
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Versal SoC instantiates the TYPE_XLNX_ZDMA object in
versal_create_admas(). Introduce the XLNX_ZDMA configuration
and select it to fix:
$ qemu-system-aarch64 -M xlnx-versal-virt ...
qemu-system-aarch64: missing object type 'xlnx.zdma'
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Exynos4210 SoC uses an OR gate on the PL330 IRQ lines.
Fixes: dab15fbe2a ("hw/arm/exynos4210: Fix DMA initialization")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131184449.382425-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The STM32F405 SoC uses an OR gate on its ADC IRQs.
Fixes: 529fc5fd3e ("hw/arm: Add the STM32F4xx SoC")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210131184449.382425-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per the ARM Generic Interrupt Controller Architecture specification
(document "ARM IHI 0048B.b (ID072613)"), the SGIINTID field is 4 bit,
not 10:
- 4.3 Distributor register descriptions
- 4.3.15 Software Generated Interrupt Register, GICD_SG
- Table 4-21 GICD_SGIR bit assignments
The Interrupt ID of the SGI to forward to the specified CPU
interfaces. The value of this field is the Interrupt ID, in
the range 0-15, for example a value of 0b0011 specifies
Interrupt ID 3.
Correct the irq mask to fix an undefined behavior (which eventually
lead to a heap-buffer-overflow, see [Buglink]):
$ echo 'writel 0x8000f00 0xff4affb0' | qemu-system-aarch64 -M virt,accel=qtest -qtest stdio
[I 1612088147.116987] OPENED
[R +0.278293] writel 0x8000f00 0xff4affb0
../hw/intc/arm_gic.c:1498:13: runtime error: index 944 out of bounds for type 'uint8_t [16][8]'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../hw/intc/arm_gic.c:1498:13
This fixes a security issue when running with KVM on Arm with
kernel-irqchip=off. (The default is kernel-irqchip=on, which is
unaffected, and which is also the correct choice for performance.)
Cc: qemu-stable@nongnu.org
Fixes: CVE-2021-20221
Fixes: 9ee6e8bb85 ("ARMv7 support.")
Buglink: https://bugs.launchpad.net/qemu/+bug/1913916
Buglink: https://bugs.launchpad.net/qemu/+bug/1913917
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131103401.217160-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The endianness of data exchange between tx and rx fifo is incorrect.
Earlier bytes are supposed to show up on MSB and later bytes on LSB,
ie: in big endian. The manual does not explicitly say this, but the
U-Boot and Linux driver codes have a swap on the data transferred
to tx fifo and from rx fifo.
With this change, U-Boot read from / write to SPI flash tests pass.
=> sf test 1ff000 1000
SPI flash test:
0 erase: 0 ticks, 4096000 KiB/s 32768.000 Mbps
1 check: 3 ticks, 1333 KiB/s 10.664 Mbps
2 write: 235 ticks, 17 KiB/s 0.136 Mbps
3 read: 2 ticks, 2000 KiB/s 16.000 Mbps
Test passed
0 erase: 0 ticks, 4096000 KiB/s 32768.000 Mbps
1 check: 3 ticks, 1333 KiB/s 10.664 Mbps
2 write: 235 ticks, 17 KiB/s 0.136 Mbps
3 read: 2 ticks, 2000 KiB/s 16.000 Mbps
Fixes: c906a3a015 ("i.MX: Add the Freescale SPI Controller")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210129132323.30946-11-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the ECSPIx_CONREG register BURST_LENGTH field, the manual says:
0x020 A SPI burst contains the 1 LSB in first word and all 32 bits in second word.
0x021 A SPI burst contains the 2 LSB in first word and all 32 bits in second word.
Current logic uses either s->burst_length or 32, whichever smaller,
to determine how many bits it should read from the tx fifo each time.
For example, for a 48 bit burst length, current logic transfers the
first 32 bit from the first word in the tx fifo, followed by a 16
bit from the second word in the tx fifo, which is wrong. The correct
logic should be: transfer the first 16 bit from the first word in
the tx fifo, followed by a 32 bit from the second word in the tx fifo.
With this change, SPI flash can be successfully probed by U-Boot on
imx6 sabrelite board.
=> sf probe
SF: Detected sst25vf016b with page size 256 Bytes, erase size 4 KiB, total 2 MiB
Fixes: c906a3a015 ("i.MX: Add the Freescale SPI Controller")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210129132323.30946-10-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
