Windows ARM64 uses LLP64 model, which breaks current assumptions.
Signed-off-by: Cao Jiaxi <driver1998@foxmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190503003707.10185-1-driver1998@foxmail.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In file included from /usr/include/string.h:494,
from include/qemu/osdep.h:101,
from util/qemu-sockets.c:18:
In function ‘strncpy’,
inlined from ‘unix_connect_saddr.isra.0’ at util/qemu-sockets.c:925:5:
/usr/include/bits/string_fortified.h:106:10: warning: ‘__builtin_strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘strncpy’,
inlined from ‘unix_listen_saddr.isra.0’ at util/qemu-sockets.c:880:5:
/usr/include/bits/string_fortified.h:106:10: warning: ‘__builtin_strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We are already validating the UNIX socket path length earlier in
the functions. If we save this string length when we first check
it, then we can simply use memcpy instead of strcpy later, avoiding
the gcc truncation warnings.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190501145052.12579-1-berrange@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When extracting a human-readable size formatter, we changed 'uint64_t
div' pre-patch to 'unsigned long div' post-patch. Which breaks on
32-bit platforms, resulting in 'inf' instead of intended values larger
than 999GB.
Fixes: 22951aaa
CC: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a file supporting DAX is used as vNVDIMM backend, mmap it with
MAP_SYNC flag in addition which can ensure file system metadata
synced in each guest writes to the backend file, without other QEMU
actions (e.g., periodic fsync() by QEMU).
Current, We have below different possible use cases:
1. pmem=on is set, shared=on is set, MAP_SYNC supported:
a: backend is a dax supporting file.
- MAP_SYNC will active.
b: backend is not a dax supporting file.
- mmap will trigger a warning. then MAP_SYNC flag will be ignored
2. The rest of cases:
- we will never pass the MAP_SYNC to mmap2
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
[ehabkost: Rebased patch to latest code on master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190422004849.26463-2-richardw.yang@linux.intel.com>
[ehabkost: squashed documentation patch]
Message-Id: <20190422004849.26463-3-richardw.yang@linux.intel.com>
[ehabkost: documentation fixup]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
besides the existing 'shared' flags, we are going to add
'is_pmem' to qemu_ram_mmap(), which indicated the memory backend
file is a persist memory.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <786c46862cfeb253ee0ea2f44d62ffe76edb7fa4.1549555521.git.yi.z.zhang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Code that doesn't want to know about current monitor vs. stdout
vs. stderr takes an fprintf_function callback and a FILE * argument to
pass to it. Actual arguments are either fprintf() and stdout or
stderr, or monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
New qemu_fprintf() and qemu_vprintf() address this need without type
punning: they are like fprintf() and vfprintf(), except they print to
the current monitor when passed a null FILE *. The next commits will
put them to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-14-armbru@redhat.com>
qsp_report() takes an fprintf()-like callback and a FILE * to pass to
it.
Its only caller hmp_sync_profile() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-7-armbru@redhat.com>
We commonly want to print to the current monitor if we have one, else
to stdout/stderr. For stderr, have error_printf(). For stdout, all
we have is monitor_vfprintf(), which is rather unwieldy. We often
print to stderr just because error_printf() is easier.
New qemu_printf() and qemu_vprintf() do exactly what's needed. The
next commits will put them to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-12-armbru@redhat.com>
printf() & friends return the number of characters written on success,
negative value on error.
monitor_printf(), monitor_vfprintf(), monitor_vprintf(),
error_printf(), error_printf_unless_qmp(), error_vprintf(), and
error_vprintf_unless_qmp() return void. Some of them carry a TODO
comment asking for int instead.
Improve them to return int like printf() does.
This makes our use of monitor_printf() as fprintf_function slightly
less dirty: the function cast no longer adds a return value that isn't
there. It still changes a parameter's pointer type. That will be
addressed in a future commit.
monitor_vfprintf() always returns zero. Improve it to return the
proper value.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-11-armbru@redhat.com>
It would be nice to have Error object not freed away when debugging a
coredump.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190415142519.73060-1-vsementsov@virtuozzo.com>
[error_printf_unless_qmp() replaced by error_printf()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before the from qerror_report() to error_setg(), hints looked like
this:
qerror_report(QERR_MACRO, ... arguments ...);
error_printf_unless_qmp(... hint ...);
error_printf_unless_qmp() made perfect sense: it printed exactly when
qerror_report() did.
After the conversion to error_setg():
error_setg(errp, QERR_MACRO, ... arguments ...);
error_printf_unless_qmp(... hint ...);
The "unless QMP part" still made some sense; in QMP context, the
caller generally uses the error as QMP response instead of printing
it.
However, everything else is wrong. If the caller handles the error,
the hint gets printed anyway (unless QMP). If the caller reports the
error, the hint gets printed *before* the report (unless QMP) or not
at all (if QMP).
Commit 50b7b000c9 fixed this by making hints a member of Error. It
kept printing hints with error_printf_unless_qmp():
void error_report_err(Error *err)
{
error_report("%s", error_get_pretty(err));
+ if (err->hint) {
+ error_printf_unless_qmp("%s\n", err->hint->str);
+ }
error_free(err);
}
This is wrong. We should (and now can) print the hint exactly when we
print the error.
The mistake has since been copied to warn_report_err() in commit
e43ead1d0b.
Fix both to use error_printf().
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190416153850.5186-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Commit message tweaked]
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Watch IDs are allocated from incrementing a int counter against
the QFileMonitor object. In very long life QEMU processes with
a huge amount of USB MTP activity creating & deleting directories
it is just about conceivable that the int counter can wrap
around. This would result in incorrect behaviour of the file
monitor watch APIs due to clashing watch IDs.
Instead of trying to detect this situation, this patch changes
the way watch IDs are allocated. It is turned into an int64_t
variable where the high 32 bits are set from the underlying
inotify "int" ID. This gives an ID that is guaranteed unique
for the directory as a whole, and we can rely on the kernel
to enforce this. QFileMonitor then sets the low 32 bits from
a per-directory counter.
The USB MTP device only sets watches on the directory as a
whole, not files within, so there is no risk of guest
triggered wrap around on the low 32 bits.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The watch IDs are mistakenly only unique within the scope of the
directory being monitored. This is not useful for clients which are
monitoring multiple directories. They require watch IDs to be unique
globally within the QFileMonitor scope.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bandan Das <bsd@redhat.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This NULL check was required while introduced in 680d16dcb7.
Later refactor added a NULL check in error_setv(), so this check
is now redundant.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190302223825.11192-2-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with cleanup-trace-events.pl. Funnies requiring manual
post-processing:
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-5-armbru@redhat.com
Message-Id: <20190314180929.27722-5-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This gives more information about the failure.
Additionally 'ENOSYS' returned for a non-Linux platforms instead of
'errno', which is not initilaized in this case.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190311135850.6537-5-i.maximets@samsung.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
qemu_memfd_create() prints the value of 'errno' which is not
set in this case.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190311135850.6537-4-i.maximets@samsung.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU always sets this flag unconditionally. We need to
check if it's supported.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190311135850.6537-3-i.maximets@samsung.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Previous to OpenBSD 6.3 [1], fcntl(F_SETFL) is not permitted on
memory devices.
Trying this call sets errno to ENODEV ("not a memory device"):
19 ENODEV Operation not supported by device.
An attempt was made to apply an inappropriate function to a device,
for example, trying to read a write-only device such as a printer.
Do not assert fcntl failures in this specific case (errno set to ENODEV)
on OpenBSD. This fixes:
$ lm32-softmmu/qemu-system-lm32
assertion "f != -1" failed: file "util/oslib-posix.c", line 247, function "qemu_set_nonblock"
Abort trap (core dumped)
[1] The fix seems https://github.com/openbsd/src/commit/c2a35b387f9d3c
"fcntl(F_SETFL) invokes the FIONBIO and FIOASYNC ioctls internally, so
the memory devices (/dev/null, /dev/zero, etc) need to permit them."
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190307142822.8531-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests started with NVDIMMs larger than the underlying host file produce
confusing errors inside the guest. This happens because the guest
accesses pages beyond the end of the file.
Check the pmem file size on startup and print a clear error message if
the size is invalid.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1669053
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Zhang Yi <yi.z.zhang@linux.intel.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190214031004.32522-3-stefanha@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Prepare for making slirp/ a standalone project.
Remove some useless includes while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many
block-specific arguments. But often iter func needs RAMBlock*.
This refactoring is needed for fast access to RAMBlock flags from
qemu_ram_foreach_block's callback. The only way to achieve this now
is to call qemu_ram_block_from_host (which also enumerates blocks).
So, this patch reduces complexity of
qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host()
from O(n^2) to O(n).
Fix RAMBlockIterFunc definition and add some functions to read
RAMBlock* fields witch were passed.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
aio_poll() has an existing assertion that the function is only called
from the AioContext's home thread if blocking is allowed.
This is not enough, some handlers make assumptions about the thread they
run in. Extend the assertion to non-blocking calls, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The commit 7197fb4058 ("util/mmap-alloc:
fix hugetlb support on ppc64") fixed Huge TLB mappings on ppc64.
However, we still need to consider the underlying huge page size
during munmap() because it requires that both address and length be a
multiple of the underlying huge page size for Huge TLB mappings.
Quote from "Huge page (Huge TLB) mappings" paragraph under NOTES
section of the munmap(2) manual:
"For munmap(), addr and length must both be a multiple of the
underlying huge page size."
On ppc64, the munmap() in qemu_ram_munmap() does not work for Huge TLB
mappings because the mapped segment can be aligned with the underlying
huge page size, not aligned with the native system page size, as
returned by getpagesize().
This has the side effect of not releasing huge pages back to the pool
after a hugetlbfs file-backed memory device is hot-unplugged.
This patch fixes the situation in qemu_ram_mmap() and
qemu_ram_munmap() by considering the underlying page size on ppc64.
After this patch, memory hot-unplug releases huge pages back to the
pool.
Fixes: 7197fb4058
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Unfold parts of qemu_ram_mmap() for the sake of understanding, moving
declarations to the top, and keeping architecture-specifics in the
ifdef-else blocks. No changes in the function behaviour.
Give ptr and ptr1 meaningful names:
ptr -> guardptr : pointer to the PROT_NONE guard region
ptr1 -> ptr : pointer to the mapped memory returned to caller
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to
be byte-swapped. This means it can't be used when the UUID
to be swapped is in a packed member of a struct. It's also
out of line with the general bswap*() functions we provide
in bswap.h, which take the value to be swapped and return it.
Make qemu_uuid_bswap() take a QemuUUID and return the swapped version.
This fixes some clang warnings about taking the address of
a packed struct member in block/vdi.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When qemu_signal_init() fails in qemu_init_main_loop(), we return
without setting an error. Its callers crash then when they try to
report the error with error_report_err().
To avoid such segmentation fault, add a new Error parameter to make
the call trace to propagate the err to the final caller.
Fixes: 2f78e491d7
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190113140849.38339-2-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQTW/AAoJECgfDbjSjVRpY34H/0wniUqht3CVVihAfC9qnL7N
jgAJ41OGgrrCmXLrwa5P5iWxIKRjp2Odo7DQ2dl+9sqYshe6WoBBXmqEa8bDeldE
69EJ3xSnZjkpScqXKoSaDO3dtibUGpdvlTKpjuh7q2FFBOvNvf3hQubhyt/vINsO
qoDMqycjXJkHSaZLfdNb3P/LAkAuHI4veNk8KEbog3XTijSUbZlb2GYc8vT/agka
0SldiEVi9CTIh7co0L2BkcLVeTMVrF3OZuWDek3tVHXPxPaNbQM3GMvHZaxqZusU
SZinnNhcnI++kgLZVHuurxo7e1S9d8Oy0QuHGX8CZ1sfeqy3vzxer0Hbb7BdLIY=
=GhIM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (49 commits)
migration: Use strnlen() for fixed-size string
migration: Fix stringop-truncation warning
hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
qemu/compiler: Define QEMU_NONSTRING
acpi: update expected files
hw: acpi: Fix memory hotplug AML generation error
tpm: clear RAM when "memory overwrite" requested
acpi: add ACPI memory clear interface
acpi: build TPM Physical Presence interface
acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
tpm: allocate/map buffer for TPM Physical Presence interface
tpm: add a "ppi" boolean property
hw/misc/edu: add msi_uninit() for pci_edu_uninit()
virtio: Make disable-legacy/disable-modern compat properties optional
globals: Allow global properties to be optional
virtio: virtio 9p really requires CONFIG_VIRTFS to work
virtio: split virtio crypto bits from virtio-pci.h
virtio: split virtio gpu bits from virtio-pci.h
virtio: split virtio serial bits from virtio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The function alters bdrv_dirty_iter_next_area(), which is wrong and
less efficient (see further commit
"block/mirror: fix and improve do_sync_target_write" for description).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Assert that the return value is not an error. This is like commit
7e6478e7d4 for qemu_set_cloexec.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is possible for an io_poll callback to be concurrently executed along
with an aio_set_fd_handlers. This can cause all sorts of problems, like
a NULL callback or a bad opaque pointer.
This changes set_fd_handlers so that it no longer modify existing handlers
entries and instead, always insert those after having proper initialisation.
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Remy Noel <remy.noel@blade-group.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181220152030.28035-3-remy.noel@blade-group.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cleaning the events will cause aio_epoll_update to unregister the fd.
Otherwise, the fd is kept registered until it is destroyed.
Signed-off-by: Remy Noel <remy.noel@blade-group.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20181220152030.28035-2-remy.noel@blade-group.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both qemu & qga build with Vista API by default already, by defining
_WIN32_WINNT 0x0600. Set it globally in osdep.h instead.
This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem
to be really useful these days.
(see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If any of these signals happen on macOS, they are not delivered to other
threads and signalfd_compat receives nothing. Indeed, POSIX reference
and sigprocmask(2) note that an attempt to block the signals results in
undefined behaviour. SEGV and FPE can't also be received by signalfd(2)
on Linux.
An ability to retrieve SIGBUS via signalfd(2) is used by QEMU for
memory preallocation therefore we can't unblock it without consequences.
But it's important to leave a remark that the signal is lost on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
macOS provides pthread_setname_np that doesn't have thread id argument.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181204172535.2799-1-armbru@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Before moving them all to include/qemu/xxhash.h.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_strtosz() & friends reject NaNs, but happily accept infinities.
They shouldn't. Fix that.
The fix makes use of qemu_strtod_finite(). To avoid ugly casts,
change the @end parameter of qemu_strtosz() & friends from char **
to const char **.
Also, add two test cases, testing that "inf" and "NaN" are properly
rejected. While at it, also fixup the function documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-3-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Let's provide a wrapper for strtod().
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181121164421.20780-2-david@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
POSIX states that the value of endptr is unspecified if strtol()
fails with EINVAL due to an invalid base argument. Since none of
the callers to check_strtox_error() initialized endptr, we could
end up propagating uninitialized data back to a caller on error.
However, passing an out-of-range base is already a sign of poor
programming, so let's just assert that base is in range, at which
point check_strtox_error() can be tightened to assert that it is
receiving an initialized ep that points somewhere within the
caller's original string, regardless of whether strto*() succeeded
or failed with ERANGE.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181206151856.77503-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_vfio_open_common() initializes s->lock only after passing s to
qemu_vfio_dma_map() via qemu_vfio_init_ramblock().
qemu_vfio_dma_map() tries to lock the uninitialized lock and crashes.
Fix by initializing s->lock first.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1645840
Fixes: 418026ca43
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20181127084143.1113-1-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our current implementation of qemu_thread_atexit* is broken on OSX.
This is because it works by cerating a piece of thread-specific
data with pthread_key_create() and using the destructor function
for that data to run the notifier function passed to it by
the caller of qemu_thread_atexit_add(). The expected use case
is that the caller uses a __thread variable as the notifier,
and uses the callback to clean up information that it is
keeping per-thread in __thread variables.
Unfortunately, on OSX this does not work, because on OSX
a __thread variable may be destroyed (freed) before the
pthread_key_create() destructor runs. (POSIX imposes no
ordering constraint here; the OSX implementation happens
to implement __thread variables in terms of pthread_key_create((),
whereas Linux uses different mechanisms that mean the __thread
variables will still be present when the pthread_key_create()
destructor is run.)
Fix this by switching to a scheme similar to the one qemu-thread-win32
uses for qemu_thread_atexit: keep the thread's notifiers on a
__thread variable, and run the notifiers on calls to
qemu_thread_exit() and on return from the start routine passed
to qemu_thread_start(). We do this with the pthread_cleanup_push()
API.
We take advantage of the qemu_thread_atexit_add() API
permission not to run thread notifiers on process exit to
avoid having to special case the main thread.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181105135538.28025-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use MAP_STACK in qemu_alloc_stack() on OpenBSD.
Added to our 6.4 release.
MAP_STACK Indicate that the mapping is used as a stack. This
flag must be used in combination with MAP_ANON and
MAP_PRIVATE.
Implement MAP_STACK option for mmap(). Synchronous faults (pagefault and
syscall) confirm the stack register points at MAP_STACK memory, otherwise
SIGSEGV is delivered. sigaltstack() and pthread_attr_setstack() are modified
to create a MAP_STACK sub-region which satisfies alignment requirements.
Observe that MAP_STACK can only be set/cleared by mmap(), which zeroes the
contents of the region -- there is no mprotect() equivalent operation, so
there is no MAP_STACK-adding gadget.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181019125239.GA13884@humpty.home.comstyle.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds some whitespace into the option help (including indentation)
and puts angle brackets around the type names. Furthermore, the list
name is no longer printed as part of every line, but only once in
advance, and only if the caller did not print a caption already.
This patch also restores the description alignment we had before commit
9cbef9d68e, just at 24 instead of 16 characters like we used to.
This increase is because now we have the type and two spaces of
indentation before the description, and with a usual type name length of
three chracters, this sums up to eight additional characters -- which
means that we now need 24 characters to get the same amount of padding
for most options. Also, 24 is a third of 80, which makes it kind of a
round number in terminal terms.
Finally, this patch amends the reference output of iotest 082 to match
the changes (and thus makes it pass again).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need an accurate count of the number of bits set in a bitmap
after a merge. In particular, since the merge operation short-circuits
a merge from an empty source, if you have bitmaps A, B, and C where
B started empty, then merge C into B, and B into A, an inaccurate
count meant that A did not get the contents of C.
In the worst case, we may falsely regard the bitmap as empty when
it has had new writes merged into it.
Fixes: be58721db
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002233314.30159-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 97f40301f1 "error: Functions to report warnings and
informational messages" copied the "use error_setg() instead"
admonition from the error reporting functions to new functions even
though it doesn't actually apply there. Drop it. Also drop it from
vreport(), where it doesn't apply anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181019123923.26649-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
Adds EXTERNAL attribute definition to qemu timers subsystem and assigns
it to virtual clock timers, used in slirp (ICMP IPv6) and ui (key queue).
Virtual clock processing in rr mode can use this attribute instead of a
separate clock type.
Fixes: 87f4fe7653
Fixes: 775a412bf8
Fixes: 9888091404
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <e771f96ab94e86b54b9a783c974f2af3009fe5d1.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Attributes are simple flags, associated with individual timers for their
whole lifetime. They intended to be used to mark individual timers for
special handling when they fire.
New/init functions family in timer interface updated and refactored (new
'attribute' argument added, timer_list replaced with timer_list_group+type
combinations, comments improved to avoid info duplication). Also existing
aio interface extended with attribute-enabled variants of functions,
which create/initialize timers.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <f47b81dbce734e9806f9516eba8ca588e6321c2f.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That patch series introduced new virtual clock type for use in external
subsystems. It breaks desired behavior in non-record/replay usage
scenarios due to a small change to existing behavior. Processing of
virtual timers belonging to new clock type is kicked off to the main
loop, which makes these timers asynchronous with vCPU thread and,
in icount mode, with whole guest execution. This breaks expected
determinism in non-record/replay icount mode of emulation where these
"external subsystems" are isolated from the host (i.e. they are
external only to guest core, not to the entire emulation environment).
Example for slirp ("user" backend for network device):
User runs qemu in icount mode with rtc clock=vm without any external
communication interfaces but with "-netdev user,restrict=on". It expects
deterministic execution, because network services are emulated inside
qemu and isolated from host. There are no reasons to get reply from DHCP
server with different delay or something like that.
The next patches revert reimplements the same changes in a better way.
This reverts commit 87f4fe7653.
This reverts commit 775a412bf8.
This reverts commit 9888091404.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <18b1e7c8f155fe26976f91be06bde98eef6f8751.1539764043.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify qemu_opts_print_help():
- to print expected argument type
- skip description if not available
- sort lines
- prefix with the list name (like qdev, to avoid confusion)
- drop 16-chars alignment, use a '-' as seperator for option name and
description
For ex, "-spice help" output is changed from:
port No description available
tls-port No description available
addr No description available
[...]
gl No description available
rendernode No description available
to:
spice.addr=str
spice.agent-mouse=bool (on/off)
spice.disable-agent-file-xfer=bool (on/off)
[...]
spice.x509-key-password=str
spice.zlib-glz-wan-compression=str
"qemu-img create -f qcow2 -o help", changed from:
size Virtual disk size
compat Compatibility level (0.10 or 1.1)
backing_file File name of a base image
[...]
lazy_refcounts Postpone refcount updates
refcount_bits Width of a reference count entry in bits
to:
backing_file=str - File name of a base image
backing_fmt=str - Image format of the base image
cluster_size=size - qcow2 cluster size
[...]
refcount_bits=num - Width of a reference count entry in bits
size=size - Virtual disk size
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QDev options accept 'help' (or '?', but that's problematic with shell
globbing) in the list of parameters, which is handy to list the
available options.
Unfortunately, this isn't built in QemuOpts. qemu_opts_parse_noisily()
seems to be the common path for command line options, so place a
fallback to print help, listing the available options.
This is quite handy, for example with qemu "-spice help".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Slirp and VNC modules use virtual clock for processing some events that
are related to the guest execution speed.
But virtual clock-related events are consideres to be deterministic and
are recorded/replayed by icount mechanism. But slirp and VNC lie outside
the recorded guest core (which includes CPU and peripherals).
Therefore slirp and VNC are external for the guest, but should work at
guest speed.
This patch introduces new virtual clock which can be used for external
subsystems for running timers that are synchronized with the guest.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180912082002.3228.82417.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run some memfd-related checks before registering hostmem-memfd &
various properties. This will help libvirt to figure out what the host
is supposed to be capable of.
qemu_memfd_check() is changed to a less optimized version, since it is
used with various flags, it no longer caches the result.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the seqlock, we either have to use atomics to remain
within defined behaviour (and note that 64-bit atomics aren't
always guaranteed to compile, irrespective of __nocheck), or
drop the atomics and be in undefined behaviour territory.
Fix it by dropping the seqlock and using atomic64 accessors.
This will limit scalability when !CONFIG_ATOMIC64, but those
machines (1) don't have many users and (2) are unlikely to
have many cores.
- With CONFIG_ATOMIC64:
$ tests/atomic_add-bench -n 1 -m -p
Throughput: 13.00 Mops/s
- Forcing !CONFIG_ATOMIC64:
$ tests/atomic_add-bench -n 1 -m -p
Throughput: 10.89 Mops/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-5-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces read/set accessors for int64_t and uint64_t.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180910232752.31565-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions do not modify their @ht or @bucket arguments.
Constify those arguments.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This currently has no users, but the use case is so common that I
think we must support it.
Note that without the appended we cannot safely remove a set of
elements; a 2-step approach (i.e. qht_iter first, keep track of
the to-be-deleted elements, and then a bunch of qht_remove calls)
would be racy, since between the iteration and the removals other
threads might insert additional elements.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 70232b5253 ("aio-posix: Don't count ctx->notifier as progress when
2018-08-15), by not reporting progress, causes aio_poll to execute the
system call when polling succeeds because of ctx->notifier. This introduces
latency before the call to aio_bh_poll() and negates the advantages of
polling, unfortunately.
The fix builds on the previous patch, separating the effect of polling on
the timeout from the progress reported to aio_poll(). ctx->notifier
does zero the timeout, causing the caller to skip the system call,
but it does not report progress, so that the bug fix of commit 70232b5253
still stands.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-4-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is a preparation for the next patch, and also a very small
optimization. Compute the timeout only once, before invoking
try_poll_mode, and adjust it in run_poll_handlers. The adjustment
is the polling time when polling fails, or zero (non-blocking) if
polling succeeds.
Fixes: 70232b5253
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-3-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
It is valid for an aio_set_fd_handler to happen concurrently with
aio_poll. In that case, poll_disable_cnt can change under the heels
of aio_poll, and the assertion on poll_disable_cnt can fail in
run_poll_handlers.
Therefore, this patch simply checks the counter on every polling
iteration. There are no particular needs for ordering, since the
polling loop is terminated anyway by aio_notify at the end of
aio_set_fd_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180912171040.1732-2-pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJbqlsyAAoJEC7Z13T+cC21RbAP/3IvGfBxuRm6rBWoghjQgbl8
KU8nPnlZUtqjxmfUTILO/h+pJ3na5MQ8hh7v8JHi+xlQ2DPkECW21DtnfdxntVjw
+b+N5Ap6J22GHyEq4HJXPWAk2rDInqkU966DvL40RiMvOTfXdg9EO0TDX0VsVgZv
BR1r7/t3T0P7hiQ0XWb9U2JchRIC+Zgk34gXZPSTpoIv89fUhzNoK5LvAA6yV1FQ
TvE8VTKJm4wkqThH1ShtbJCBKjHjW/W8LYZr3YMothcs8vGjEdEcDL4BoJZDn3bF
h4VTkU+k8lp7W9LmlnPnu1WH/5ezhzdwJTeFaPJt4U10WKJptAS4vbK03DXlds9O
9d2BOXKrima2kSr1ejSe1f0kcE8fis1XFmSuhF61Nbw6ngT5+pP2JSc1XwFazd2K
zQwV4GXBLzAGnd4F2Ec+5TKzbGFVfczxeBDiBkkVmG+XdX/UXJpkpPYGAaw7DDiK
JwKVVYIPk1ll6MAbR6qEGsvE/adHNEm8lUdjXqwgbQlIeUZ2H0hCu9lJ0X81mtoQ
WZP+nMa/87COnlPX6VPVgxM2TXQOH/UbGz/WmYzZ6/gPKTX+gfwrHQGdp7Tjl33U
KxFKWioFnoqGuyWasvTtKEK67/IlrY+w1nXuuqKJg8J2/qx1SVtx45FHkRkxkIDx
4boRpx0XUqpDVdf8VhRB
=dXgp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2018-09-25' into staging
- Deprecate the usage of a network backend via "name" instead of "id"
- Deprecate the "enforce-config-section" machine parameter
- Re-enable the wdt_ib700, endianness and vmxnet3 qtests
- Some trivial fixes and doc update patches that crossed my way
# gpg: Signature made Tue 25 Sep 2018 16:58:42 BST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2018-09-25:
Revert "check: Move VMXNET3 test to common"
Revert "check: Move endianess test to common"
Revert "check: Move wdt_ib700 test to common"
tests/migration: Speed up the test on ppc64
hw/qdev-core: Fix description of instance_init
qdev: fix a typo in comment
docs: Fix some typos (most found by codespell)
trivial: Make bios files and source files non-executable
memfd: fix possible usage of the uninitialized file descriptor
hw/core/machine: Officially deprecate the enforce-config-section parameter
net/slirp: Deprecate the [hub_id name] parameter tuple
net: Deprecate the "name" parameter of -net
Makefile: Add missing dependency for qemu-deprecated.texi
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu_memfd_alloc_check() routine allocates the fd variable on stack.
This variable is initialized inside the qemu_memfd_alloc() function.
There are several cases when *fd will be left unintialized which can
lead to the unexpected close() in the qemu_memfd_free() call.
Set file descriptor to -1 before calling the qemu_memfd_alloc routine.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_do_drained_begin/end() assume that they are called with the
AioContext lock of bs held. If we call drain functions from a coroutine
with the AioContext lock held, we yield and schedule a BH to move out of
coroutine context. This means that the lock for the home context of the
coroutine is released and must be re-acquired in the bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
AIO Coroutines shouldn't by managed by an AioContext different than the
one assigned when they are created. aio_co_enter avoids entering a
coroutine from a different AioContext, calling aio_co_schedule instead.
Scheduled coroutines are then entered by co_schedule_bh_cb using
qemu_coroutine_enter, which just calls qemu_aio_coroutine_enter with the
current AioContext obtained with qemu_get_current_aio_context.
Eventually, co->ctx will be set to the AioContext passed as an argument
to qemu_aio_coroutine_enter.
This means that, if an IO Thread's AioConext is being processed by the
Main Thread (due to aio_poll being called with a BDS AioContext, as it
happens in AIO_WAIT_WHILE among other places), the AioContext from some
coroutines may be wrongly replaced with the one from the Main Thread.
This is the root cause behind some crashes, mainly triggered by the
drain code at block/io.c. The most common are these abort and failed
assertion:
util/async.c:aio_co_schedule
456 if (scheduled) {
457 fprintf(stderr,
458 "%s: Co-routine was already scheduled in '%s'\n",
459 __func__, scheduled);
460 abort();
461 }
util/qemu-coroutine-lock.c:
286 assert(mutex->holder == self);
But it's also known to cause random errors at different locations, and
even SIGSEGV with broken coroutine backtraces.
By using qemu_aio_coroutine_enter directly in co_schedule_bh_cb, we can
pass the correct AioContext as an argument, making sure co->ctx is not
wrongly altered.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>