This allows to pass the device name.
You can test this with the "route" command.
WITHOUT this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
WITH this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some applications use /proc/$$/... (where $$ is the own pid) instead of
/proc/self/... to refer to their own proc files. Extend the interception
for open and readlink to handle this case. Also, do the same interception
in readlinkat.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since 80ccf93b we flush the block device during close. The
bdrv_drain_all() call should come before bdrv_flush() to ensure guest
write requests have completed. Otherwise we may miss pending writes
when flushing.
Call bdrv_drain_all() again for safety as the final step after
bdrv_flush(). This should not be necessary but we can be paranoid here
in case bdrv_flush() left I/O pending.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
CURL driver requests partial data from server on guest IO req. For HTTP
and HTTPS, it uses "Range: ***" in requests, and this will not work if
server not accepting range. This patch does this check when open.
* Removed curl_size_cb, which is not used: On one hand it's registered to
libcurl as CURLOPT_WRITEFUNCTION, instead of CURLOPT_HEADERFUNCTION,
which will get called with *data*, not *header*. On the other hand the
s->len is assigned unconditionally later.
In this gone function, the sscanf for "Content-Length: %zd", on
(void *)ptr, which is not guaranteed to be zero-terminated, is
potentially a security bug. So this patch fixes it as a side-effect. The
bug is reported as: https://bugs.launchpad.net/qemu/+bug/1188943
(Note the bug is marked "private" so you might not be able to see it)
* Introduced curl_header_cb, which is used to parse header and mark the
server as accepting range if "Accept-Ranges: bytes" line is seen from
response header. If protocol is HTTP or HTTPS, but server response has
no not this support, refuse to open this URL.
Note that python builtin module SimpleHTTPServer is an example of not
supporting range, if you need to test this driver, get a better server
or use internet URLs.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Depending on the subformat, has_zero_init queries underlying storage for
flat extent. If it has a flat extent and its underlying storage doesn't
have zero init, return 0. Otherwise return 1.
Aligns the operator assignments.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cur_map is not used anymore; instead, each AddressSpaceDispatch
has its own nodes/sections pair. The priorities of the
MemoryListeners, and in the future RCU, guarantee that the
nodes/sections are not freed while they are still in use.
(In fact, next_map itself is not needed except to free the data on the
next update).
To avoid incorrect use, replace cur_map with a temporary copy that
is only valid while the topology is being updated. If you use it,
the name prev_map makes it clear that you're doing something weird.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, AddressSpaceDispatch holds a constistent tuple of
(phys_map, nodes, sections). This will be important when updates
of the topology will run concurrently with reads.
cur_map is not used anymore except for freeing it at the end of the
topology update.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This same treatment previously done to phys_node_map and phys_sections
is now applied to the dispatch field of AddressSpace. Topology updates
use as->next_dispatch while accesses use as->dispatch.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help having two copies of AddressSpaceDispatch during the
recreation of the radix tree (one being built, and one that is complete
and will be protected by RCU). We do not want to have to unregister and
re-register the listener.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, phys_node_map and phys_sections are shared by all
of the AddressSpaceDispatch. When updating mem topology, all
AddressSpaceDispatch will rebuild dispatch tables sequentially
on them. In order to prepare for RCU access, leave the old
memory map alive while the next one is being accessed.
When rebuilding, the new dispatch tables will build and lookup
next_map; after all dispatch tables are rebuilt, we can switch
to next_* and free the previous table.
Based on a patch from Liu Ping Fan.
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sections like phys_section_unassigned always have fixed address
in phys_sections. Declared as macro, so we can use them
when having more than one phys_sections array.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Object reference counts will soon be changed outside the BQL. So we need
to use atomics in object_ref/unref.
Based on a patch by Liu Ping Fan.
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, a FlatView can be used even after a concurrent
update has replaced it. Because we do not yet have RCU, we use a
mutex to protect the small critical sections that read/write the
as->current_map pointer. Accesses to the FlatView can be done
outside the mutex.
If a MemoryRegion will be used after the FlatView is unref-ed (or after
a MemoryListener callback is returned), a reference has to be added to
that MemoryRegion. memory_region_find already does it for the region
that it returns. The same will be done for address_space_translate
as soon as the dispatch tree is also converted to RCU-style.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the first step towards converting as->current_map to
RCU-style updates, where the FlatView updates run concurrently
with uses of an old FlatView.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will soon require accesses to as->current_map to be placed under
a lock (with reference counting so as to keep the critical section
small). To simplify this change, always fetch as->current_map into
a local variable and access it through that variable.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We're already using them in several places, but __sync builtins are just
too ugly to type, and do not provide seqcst load/store operations.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are using the same struct name for two devices. 8250 is widespread
enough that this causes some confusion, rename the other instance.
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The iothread mutex might be released between map and unmap, so the
mapped region might disappear.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
First of all, rename "todo" to "done".
Second, clearly separate the case of done == 0 with the case of done != 0.
This will help handling reference counting in the next patch.
Third, this test:
if (memory_region_get_ram_addr(mr) + xlat != raddr + todo) {
does not guarantee that the memory region is the same across two iterations
of the while loop. For example, you could have two blocks:
A) size 640 K, mapped at physical address 0, ram_addr_t 0
B) size 64 K, mapped at physical address 0xa0000, ram_addr_t 0xa0000
then mapping 1 M starting at physical address zero will erroneously treat
B as the continuation of block A. qemu_ram_ptr_length ensures that no
invalid memory is accessed, but it is still a pointless complication of
the algorithm. The patch makes the logic clearer with an explicit test
that the memory region is the same.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch it would not be used elsewhere anyway. Also,
the _nofail and the standard versions of this function return different
things, which is confusing. Removing the function from the public headers
limits the confusion.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This new API will avoid having too many memory_region_ref/unref
in paths that currently use memory_region_find.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>