If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VMDK performs a probing check in vmdk_co_create_opts() to prevent the
user from assigning non-VMDK files as a backing file, because it only
supports VMDK backing files. However, with the @backing runtime option,
it is possible to assign arbitrary nodes as backing nodes, regardless of
what the image header says. Therefore, VMDK may not just access backing
nodes assuming they are VMDK nodes -- which it does, because it needs to
compare the backing file's CID with the overlay's parentCID value, and
naturally the backing file only has a CID when it's a VMDK file.
Instead, it should report the CID of non-VMDK backing files not to match
the overlay because clearly a non-present CID does not match.
Without this change, vmdk_read_cid() reads from the backing file's
bs->file, which may be NULL (in which case we get a segfault). Also, it
interprets bs->opaque as a BDRVVmdkState and then reads from the
.desc_offset field, which usually will just return some arbitrary value
which then results in either garbage to be read, or bdrv_pread() to
return an error, both of which result in a non-matching CID to be
reported.
(In a very unlikely case, we could read something that looks like a
VMDK descriptor, and then get a CID which might actually match. But
that is highly unlikely, and the only result would be that VMDK accepts
the backing file which is not too bad (albeit unintentional).)
((And in theory, the seek to .desc_offset might leak data from another
block driver's opaque object. But then again, the user should realize
very quickly that a non-VMDK backing file does not work (because the
read will very likely fail, due to the reasons given above), so this
should not be exploitable.))
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-2-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
One of them is a typo. But update both to be more readable.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180702025836.20957-3-famz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
-----BEGIN PGP SIGNATURE-----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=z5AC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Use worker threads for compression to improve performance of
'qemu-img convert -W' and compressed backup jobs
- blklogwrites: New filter driver to log write requests to an image in
the dm-log-writes format
- file-posix: Fix image locking during image creation
- crypto: Fix memory leak in error path
- Error out instead of silently truncating node names
# gpg: Signature made Thu 05 Jul 2018 11:24:33 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Unlock FD after creation
file-posix: Fix creation locking
block/blklogwrites: Add an option for the update interval of the log superblock
block/blklogwrites: Add an option for appending to an old log
block/blklogwrites: Change log_sector_size from int64_t to uint64_t
block/crypto: Fix memory leak in create error path
block: Don't silently truncate node names
block: Add blklogwrites
block: Move two block permission constants to the relevant enum
qcow2: add compress threads
qcow2: refactor data compression
qemu-img: allow compressed not-in-order writes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Closing the FD does not necessarily mean that it is unlocked. Fix this
by relinquishing all permission locks before qemu_close().
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_apply_lock_bytes() takes a bit mask of "permissions that are NOT
shared".
Also, make the "perm" and "shared" variables uint64_t, because I do not
particularly like using ~ on signed integers (and other permission masks
are usually uint64_t, too).
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a way to ensure that the log superblock is periodically
updated. Before, this was only done on flush requests, which may
not be enough if the VM exits abnormally, omitting the final flush.
The default interval is 4096 write requests.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Suggested by Kevin Wolf. May be useful when testing multiple batches
of writes or doing long-term testing involving restarts of the VM.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This was a simple oversight when working on intermediate versions
of the original patch which introduced blklogwrites.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implements a block device write logging system, similar to Linux kernel
device mapper dm-log-writes. The write operations that are performed
on a block device are logged to a file or another block device. The
write log format is identical to the dm-log-writes format. Currently,
log markers are not supported.
This functionality can be used for crash consistency and fs consistency
testing. By implementing it in qemu, tests utilizing write logs can be
be used to test non-Linux drivers and older kernels.
The driver accepts an optional parameter to set the sector size used
for logging. This makes the driver require all requests to be aligned
to this sector size and also makes offsets and sizes of writes in the
log metadata to be expressed in terms of this value (the log format has
a granularity of one sector for offsets and sizes). This allows
accurate logging of writes to guest block devices that have unusual
sector sizes.
The implementation is based on the blkverify and blkdebug block
drivers.
Signed-off-by: Aapo Vienamo <aapo@tuxera.com>
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do data compression in separate threads. This significantly improve
performance for qemu-img convert with -W (allow async writes) and -c
(compressed) options.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make a separate function for compression to be parallelized later.
- use .avail_out field instead of .next_out to calculate size of
compressed data. It looks more natural and it allows to keep dest to
be void pointer
- set avail_out to be at least one byte less than input, to be sure
avoid inefficient compression earlier
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bitmap lock/unlock were added to bdrv_enable_dirty_bitmap in
8b1402ce80, but some places were not updated correspondingly, which
leads to trying to take this lock twice, which is dead-lock. Fix this.
Actually, iotest 199 (about dirty bitmap postcopy migration) is broken
now, and this fixes it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add _locked version of bdrv_enable_dirty_bitmap, to fix dirty bitmap
migration in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbOtJPAAoJEKeha0olJ0NqEvwH/3FwWnlBdBvdYGgPjzGE1Atm
ofCKcyxE/2VJtxeWlZQHzs1VqSq81s7am5SdzOrIWnQekvHFcLu6/71RABiauzMd
neCvVOrXOVdktj1i1Z2Gg4BgjDmqbTDlo5ssVh/oXP0Zebi6OZFfQrB7y3cGBvui
4XI7lW9qJxt6F1FlKloXnofWRDENyo5vgdz6QjQXfauthw2T5045RIPTfiz03FCp
fbs+6K0+bKxfPdNLrqxxOZo/loYnEXbDYv6VBAIWBqztXVnMHxCqnh0YN05jwsfF
TRW0/YT8lpWarOZ1soIC6a/OGXQZbxgRhZ+Zr+Wa2jw0YNHJanU9isxi37aUqQo=
=Xivx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-07-02' into staging
nbd patches for 2018-07-02
Bug fixes and iotest exposure of fleecing via NBD (serving a
read-only point-in-time view via blockdev-backup sync:none,
as well as serving dirty bitmaps over NBD), including a new
x-dirty-bitmap parameter when opening NBD clients as the
counterpart to x-nbd-server-add-bitmap. Also a random fix
for iscsi block_status spotted by Coverity that missed other
miscellaneous trees.
- Eric Blake: nbd/server: Fix dirty bitmap logic regression
- Eric Blake: iscsi: Avoid potential for get_status overflow
- John Snow/Vladimir Sementsov-Ogievskiy: 0/2 block: formalize and test fleecing
- Eric Blake: 0/2 test NBD bitmap export
# gpg: Signature made Tue 03 Jul 2018 02:33:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-07-02:
iotests: New test 223 for exporting dirty bitmap over NBD
nbd/client: Add x-dirty-bitmap to query bitmap from server
iotests: add 222 to test basic fleecing
blockdev: enable non-root nodes for backup source
iscsi: Avoid potential for get_status overflow
nbd/server: Fix dirty bitmap logic regression
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The implementation is similar to the 'qemu-img convert'. In the
beginning of the job, offloaded copy is attempted. If it fails, further
I/O will go through the existing bounce buffer code path.
Then, as Kevin pointed out, both this and qemu-img convert can benefit
from a local check if one request fails because of, for example, the
offset is beyond EOF, but another may well be accepted by the protocol
layer. This will be implemented separately.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-4-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This semantics is needed by drive-backup so implement it before using
this API there.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-3-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
src may be NULL if BDRV_REQ_ZERO_WRITE flag is set, in this case only
check dst and dst->bs. This bug was introduced when moving in the
request tracking code from bdrv_co_copy_range, in 37aec7d75e.
This especially fixes the possible segfault when initializing src_bs
with a NULL src.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-2-famz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
Detected by Coverity: Multiplying two 32-bit int and assigning
the result to a 64-bit number is a risk of overflow. Prior to
the conversion to byte-based interfaces, the block layer took
care of ensuring that a status request never exceeded 2G in
the driver; but after that conversion, the block layer expects
drivers to deal with any size request (the driver can always
truncate the request size back down, as long as it makes
progress). So, in the off-chance that someone makes a large
request, we are at the mercy of whether iscsi_get_lba_status_task()
will cap things to at most INT_MAX / iscsilun->block_size when
it populates lbasd->num_blocks; since I could not easily audit
that, it's better to be safe than sorry by just forcing a 64-bit
multiply.
Fixes: 92809c36
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180508212718.1482663-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20180625124238.25339-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all callers of vectored I/O have been converted
to use our preferred byte-based bdrv_co_p{read,write}v(), we can
delete the unused bdrv_co_{read,write}v().
Furthermore, this gets rid of the signature difference between the
public bdrv_co_writev() and the callback .bdrv_co_writev (the
latter still exists, because some drivers still need more work
before they are fully byte-based).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based calls
into the block layer from the vhdx driver.
Ideally, the vhdx driver should switch to doing everything
byte-based, but that's a more invasive change that requires a
bit more auditing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based calls
into the block layer from the replication driver.
Ideally, the replication driver should switch to doing everything
byte-based, but that's a more invasive change that requires a
bit more auditing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. The qcow driver is now ready to fully utilize the
byte-based callback interface, as long as we override the default
alignment to still be 512 (needed at least for asserts present
because of encryption, but easier to do everywhere than to audit
which sub-sector requests are handled correctly, especially since
we no longer recommend qcow for new disk images).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internals of the qcow
driver write function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.
A later patch will then switch the qcow driver as a whole over
to byte-based operation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internals of the qcow
driver read function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.
A later patch will then switch the qcow driver as a whole over
to byte-based operation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internal helper function
get_cluster_offset(), by changing n_start and n_end to be byte
offsets rather than sector indices within the cluster being
allocated. However, assert that these values are still
sector-aligned (at least qcrypto_block_encrypt() still wants that).
For now we get that alignment for free because we still use
sector-based driver callbacks.
A later patch will then switch the qcow driver as a whole over
to byte-based operation; but will still leave things at sector
alignments as it is not worth auditing the qcow image format
to worry about sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based calls
into the block layer from the parallels driver.
Ideally, the parallels driver should switch to doing everything
byte-based, but that's a more invasive change that requires a
bit more auditing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
EINTR should be checked against errno, not ret. While fixing the bug,
collect the branches with a switch block.
Also, change the return value from -ENOSTUP to -ENOSPC when the actual
issue is request range passes EOF, which should be distinguishable from
the case of error == ENOSYS by the caller, so that it could still retry
with other byte ranges, whereas it shouldn't retry anymore upon ENOSYS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Per SCSI definition the designator_length we receive from INQUIRY is 8,
12 or at most 16, but we should be careful because the remote iscsi
target may misbehave, otherwise we could have a buffer overflow.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not updating src_offset will result in wrong data being written to dst
image.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies file-posix by implementing the coroutine variants of
the discard and flush BlockDriver callbacks. These were the last
remaining users of paio_submit(), which can be removed now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If we managed to allocate the clusters, but then failed to write the
data, there's a good chance that we'll still be able to free the
clusters again in order to avoid cluster leaks (the refcounts are
cached, so even if we can't write them out right now, we may be able to
do so when the VM is resumed after a werror=stop/enospc pause).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
block_crypto_open_opts_init() and block_crypto_create_opts_init()
contain a virtual visit of QCryptoBlockOptions and
QCryptoBlockCreateOptions less member "format", respectively.
Change their callers to put member "format" in the QDict, so they can
use the generated visitors for these types instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
in_flight and tracked requests need to be tracked in every layer during
recursion. For now the only user is qemu-img convert where overlapping
requests and IOThreads don't exist, therefore this change doesn't make
much difference form user point of view, but it is incorrect as part of
the API. Fix it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the beginning of the function, we initialize the local variable to 0,
and in the body of the function, we check the assigned values and exit
the loop immediately. So here it can never be non-zero.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This moves the code to resize an image file to the thread pool to avoid
blocking.
Creating large images with preallocation with blockdev-create is now
actually a background job instead of blocking the monitor (and most
other things) until the preallocation has completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When growing an image, block drivers (especially protocol drivers) may
initialise the newly added area. I/O requests to the same area need to
wait for this initialisation to be completed so that data writes don't
get overwritten and reads don't read uninitialised data.
To avoid overhead in the fast I/O path by adding new locking in the
protocol drivers and to restrict the impact to requests that actually
touch the new area, reuse the existing tracked request infrastructure in
block/io.c and mark all discard requests as serialising.
With this change, it is safe for protocol drivers to make
.bdrv_co_truncate actually asynchronous.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the bdrv_truncate() implementation from block.c to block/io.c
so it can have access to the tracked requests infrastructure.
This involves making refresh_total_sectors() public (in block_int.h).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers are coroutine_fns now, so we can just directly call
preallocate_co().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
If qcow2_alloc_clusters_at() returns an error, we do need to negate it
to get back the positive errno code for error_setg_errno(), but we still
need to return the negative error code.
Fixes: 772d1f973f
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Coverity can't see that qobject_input_visitor_new_flat_confused()
returns non-null when it doesn't set @local_err. Check the return
value instead, like all the other callers do.
Fixes: CID 1393615
Fixes: CID 1393616
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
laio_init() can fail for a couple of reasons, which will lead to a NULL
pointer dereference in laio_attach_aio_context().
To solve this, add a aio_setup_linux_aio() function which is called
early in raw_open_common. If this fails, propagate the error up. The
signature of aio_get_linux_aio() was not modified, because it seems
preferable to return the actual errno from the possible failing
initialization calls.
Additionally, when the AioContext changes, we need to associate a
LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
callback and call the new aio_setup_linux_aio(), which will allocate a
new AioContext if needed, and return errors on failures. If it fails for
any reason, fallback to threaded AIO with an error message, as the
device is already in-use by the guest.
Add an assert that aio_get_linux_aio() cannot return NULL.
Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com>
Message-id: 20180622193700.6523-1-naravamudan@digitalocean.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Flat unions may now have uncovered branches, so it is possible to get rid
of empty types defined for that purpose only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs. Currently, this setting will
remain constant for the duration of the entire block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements active synchronous mirroring. In active mode, the
passive mechanism will still be in place and is used to copy all
initially dirty clusters off the source disk; but every write request
will write data both to the source and the target disk, so the source
cannot be dirtied faster than data is mirrored to the target. Also,
once the block job has converged (BLOCK_JOB_READY sent), source and
target are guaranteed to stay in sync (unless an error occurs).
Active mode is completely optional and currently disabled at runtime. A
later patch will add a way for users to enable it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow us to access the block job data when the mirror block
driver becomes more complex.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new function allows to look for a consecutively dirty area in a
dirty bitmap.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new parameter allows the caller to just query the next dirty
position without moving the iterator.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With this, the mirror_top_bs is no longer just a technically required
node in the BDS graph but actually represents the block job operation.
Also, drop MirrorBlockJob.source, as we can reach it through
mirror_top_bs->backing.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch makes the mirror code differentiate between simply waiting
for any operation to complete (mirror_wait_for_free_in_flight_slot())
and specifically waiting for all operations touching a certain range of
the virtual disk to complete (mirror_wait_on_conflicts()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Attach a CoQueue to each in-flight operation so if we need to wait for
any we can use it to wait instead of just blindly yielding and hoping
for some operation to wake us.
A later patch will use this infrastructure to allow requests accessing
the same area of the virtual disk to specifically wait for each other.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order to talk to the source BDS (and maybe in the future to the
target BDS as well) directly, we need to convert our existing AIO
requests into coroutine I/O requests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When converting mirror's I/O to coroutines, we are going to need a point
where these coroutines are created. mirror_perform() is going to be
that point.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Removing a drive with drive_del while it is being used to run an I/O
intensive workload can cause QEMU to crash.
An AIO flush can yield at some point:
blk_aio_flush_entry()
blk_co_flush(blk)
bdrv_co_flush(blk->root->bs)
...
qemu_coroutine_yield()
and let the HMP command to run, free blk->root and give control
back to the AIO flush:
hmp_drive_del()
blk_remove_bs()
bdrv_root_unref_child(blk->root)
child_bs = blk->root->bs
bdrv_detach_child(blk->root)
bdrv_replace_child(blk->root, NULL)
blk->root->bs = NULL
g_free(blk->root) <============== blk->root becomes stale
bdrv_unref(child_bs)
bdrv_delete(child_bs)
bdrv_close()
bdrv_drained_begin()
bdrv_do_drained_begin()
bdrv_drain_recurse()
aio_poll()
...
qemu_coroutine_switch()
and the AIO flush completion ends up dereferencing blk->root:
blk_aio_complete()
scsi_aio_complete()
blk_get_aio_context(blk)
bs = blk_bs(blk)
ie, bs = blk->root ? blk->root->bs : NULL
^^^^^
stale
The problem is that we should avoid making block driver graph
changes while we have in-flight requests. Let's drain all I/O
for this BB before calling bdrv_root_unref_child().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_drain_all_*() used bdrv_next() to iterate over all root nodes and
did a subtree drain for each of them. This works fine as long as the
graph is static, but sadly, reality looks different.
If the graph changes so that root nodes are added or removed, we would
have to compensate for this. bdrv_next() returns each root node only
once even if it's the root node for multiple BlockBackends or for a
monitor-owned block driver tree, which would only complicate things.
The much easier and more obviously correct way is to fundamentally
change the way the functions work: Iterate over all BlockDriverStates,
no matter who owns them, and drain them individually. Compensation is
only necessary when a new BDS is created inside a drain_all section.
Removal of a BDS doesn't require any action because it's gone afterwards
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before we can introduce a single polling loop for all nodes in
bdrv_drain_all_begin(), we must make sure to run it outside of coroutine
context like we already do for bdrv_do_drained_begin().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot allow aio_poll() in bdrv_drain_invoke(begin=true) until we're
done with propagating the drain through the graph and are doing the
single final BDRV_POLL_WHILE().
Just schedule the coroutine with the callback and increase bs->in_flight
to make sure that the polling phase will wait for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_do_drained_begin() is only safe if we have a single
BDRV_POLL_WHILE() after quiescing all affected nodes. We cannot allow
that parent callbacks introduce a nested polling loop that could cause
graph changes while we're traversing the graph.
Split off bdrv_do_drained_begin_quiesce(), which only quiesces a single
node without waiting for its requests to complete. These requests will
be waited for in the BDRV_POLL_WHILE() call down the call chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anything can happen inside BDRV_POLL_WHILE(), including graph
changes that may interfere with its callers (e.g. child list iteration
in recursive callers of bdrv_do_drained_begin).
Switch to a single BDRV_POLL_WHILE() call for the whole subtree at the
end of bdrv_do_drained_begin() to avoid such effects. The recursion
happens now inside the loop condition. As the graph can only change
between bdrv_drain_poll() calls, but not inside of it, doing the
recursion here is safe.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For bdrv_drain(), recursively waiting for child node requests is
pointless because we didn't quiesce their parents, so new requests could
come in anyway. Letting the function work only on a single node makes it
more consistent.
For subtree drains and drain_all, we already have the recursion in
bdrv_do_drained_begin(), so the extra recursion doesn't add anything
either.
Remove the useless code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 91af091f92 added an additional aio_poll() to BDRV_POLL_WHILE()
in order to make sure that all pending BHs are executed on drain. This
was the wrong place to make the fix, as it is useless overhead for all
other users of the macro and unnecessarily complicates the mechanism.
This patch effectively reverts said commit (the context has changed a
bit and the code has moved to AIO_WAIT_WHILE()) and instead polls in the
loop condition for drain.
The effect is probably hard to measure in any real-world use case
because actual I/O will dominate, but if I run only the initialisation
part of 'qemu-img convert' where it calls bdrv_block_status() for the
whole image to find out how much data there is copy, this phase actually
needs only roughly half the time after this patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
All involved nodes are already idle, we called bdrv_do_drain_begin() on
them.
The comment in the code suggested that this was not correct because the
completion of a request on one node could spawn a new request on a
different node (which might have been drained before, so we wouldn't
drain the new request). In reality, new requests to different nodes
aren't spawned out of nothing, but only in the context of a parent
request, and they aren't submitted to random nodes, but only to child
nodes. As long as we still poll for the completion of the parent request
(which we do), draining each root node separately is good enough.
Remove the additional polling code from bdrv_drain_all_begin() and
replace it with an assertion that all nodes are already idle after we
drained them separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers pass false for the 'recursive' parameter now. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_do_drain_begin/end() implement already everything that
bdrv_drain_all_begin/end() need and currently still do manually: Disable
external events, call parent drain callbacks, call block driver
callbacks.
It also does two more things:
The first is incrementing bs->quiesce_counter. bdrv_drain_all() already
stood out in the test case by behaving different from the other drain
variants. Adding this is not only safe, but in fact a bug fix.
The second is calling bdrv_drain_recurse(). We already do that later in
the same function in a loop, so basically doing an early first iteration
doesn't hurt.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
As long as nobody keeps the other I/O thread from working, there is no
reason why bdrv_drain() wouldn't work with cross-AioContext events. The
key is that the root request we're waiting for is in the AioContext
we're polling (which it always is for bdrv_drain()) so that aio_poll()
is woken up in the end.
Add a test case that shows that it works. Remove the comment in
bdrv_drain() that claims otherwise.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.
Tests need to be updated to set the serial number with -global instead
of using the -drive option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Legacy -drive supports "password-secret" parameter that isn't
available with -blockdev / blockdev-add. That's because we backed out
our first try to provide it there due to interface design doubts, in
commit 577d8c9a81, v2.9.0.
This is the second try. It brings back the parameter, except it's
named "key-secret" now.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
Addressed by the rename.
* We're not sure where member @password-secret belongs (see the
previous commit).
See previous commit.
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter auth-client-required lets you configure authentication
methods. We tried to provide that in v2.9.0, but backed out due to
interface design doubts (commit 464444fcc1).
This commit is similar to what we backed out, but simpler: we use a
list of enumeration values instead of a list of objects with a member
of enumeration type.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
Fixed: we use "auth-client-required".
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
That fix is commit 2836284db6. This commit doesn't bring the bugs
back.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
We've had time to ponder, and we decided to stick to the way Ceph
configuration works: the key configured separately, and silently
ignored if the authentication method doesn't use it.
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
Likewise.
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
Again, we decided to stick to the way Ceph configuration works, except
we make auth-client-required a list of enumeration values instead of a
string containing keywords separated by delimiters.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remaining uses of qobject_input_visitor_new_keyval() in the block
subsystem:
* block_crypto_open_opts_init()
Currently doesn't visit any non-string scalars, thus safe. It's
called from
- block_crypto_open_luks()
Creates the QDict with qemu_opts_to_qdict_filtered(), which
creates only string scalars, but has a TODO asking for other types.
- qcow_open()
- qcow2_open(), qcow2_co_invalidate_cache(), qcow2_reopen_prepare()
* block_crypto_create_opts_init(), called from
- block_crypto_co_create_opts_luks()
Also creates the QDict with qemu_opts_to_qdict_filtered().
* vdi_co_create_opts()
Also creates the QDict with qemu_opts_to_qdict_filtered().
Replace these uses by qobject_input_visitor_new_flat_confused() for
robustness. This adds crumpling. Right now, that's a no-op, but if
we ever extend these things in non-flat ways, crumpling will be
needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following pattern occurs in the .bdrv_co_create_opts() methods of
parallels, qcow, qcow2, qed, vhdx and vpc:
qobj = qdict_crumple_for_keyval_qiv(qdict, errp);
qobject_unref(qdict);
qdict = qobject_to(QDict, qobj);
if (qdict == NULL) {
ret = -EINVAL;
goto done;
}
v = qobject_input_visitor_new_keyval(QOBJECT(qdict));
[...]
ret = 0;
done:
qobject_unref(qdict);
[...]
return ret;
If qobject_to() fails, we return failure without setting errp. That's
wrong. As far as I can tell, it cannot fail here. Clean it up
anyway, by removing the useless conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous commit fixed -blockdev breakage due to misuse of the
qobject input visitor's keyval flavor in bdrv_file_open(). The commit
message explain why using the plain flavor would be just as wrong; it
would break -drive. Turns out we break it in three places:
nbd_open(), sd_open() and ssh_file_open(). They are even marked
FIXME. Example breakage:
$ qemu-system-x86 -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off
qemu-system-x86: -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off: Invalid parameter type for 'numeric', expected: boolean
Fix it the same way: replace qdict_crumple() by
qdict_crumple_for_keyval_qiv(), and switch from plain to the keyval
flavor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Configuration flows through the block subsystem in a rather peculiar
way. Configuration made with -drive enters it as QemuOpts.
Configuration made with -blockdev / blockdev-add enters it as QAPI
type BlockdevOptions. The block subsystem uses QDict, QemuOpts and
QAPI types internally. The precise flow is next to impossible to
explain (I tried for this commit message, but gave up after wasting
several hours). What I can explain is a flaw in the BlockDriver
interface that leads to this bug:
$ qemu-system-x86_64 -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234
qemu-system-x86_64: -blockdev node-name=n1,driver=nfs,server.type=inet,server.host=localhost,path=/foo/bar,user=1234: Internal error: parameter user invalid
QMP blockdev-add is broken the same way.
Here's what happens. The block layer passes configuration represented
as flat QDict (with dotted keys) to BlockDriver methods
.bdrv_file_open(). The QDict's members are typed according to the
QAPI schema.
nfs_file_open() converts it to QAPI type BlockdevOptionsNfs, with
qdict_crumple() and a qobject input visitor.
This visitor comes in two flavors. The plain flavor requires scalars
to be typed according to the QAPI schema. That's the case here. The
keyval flavor requires string scalars. That's not the case here.
nfs_file_open() uses the latter, and promptly falls apart for members
@user, @group, @tcp-syn-count, @readahead-size, @page-cache-size,
@debug.
Switching to the plain flavor would fix -blockdev, but break -drive,
because there the scalars arrive in nfs_file_open() as strings.
The proper fix would be to replace the QDict by QAPI type
BlockdevOptions in the BlockDriver interface. Sadly, that's beyond my
reach right now.
Next best would be to fix the block layer to always pass correctly
typed QDicts to the BlockDriver methods. Also beyond my reach.
What I can do is throw another hack onto the pile: have
nfs_file_open() convert all members to string, so use of the keyval
flavor actually works, by replacing qdict_crumple() by new function
qdict_crumple_for_keyval_qiv().
The pattern "pass result of qdict_crumple() to
qobject_input_visitor_new_keyval()" occurs several times more:
* qemu_rbd_open()
Same issue as nfs_file_open(), but since BlockdevOptionsRbd has only
string members, its only a latent bug. Fix it anyway.
* parallels_co_create_opts(), qcow_co_create_opts(),
qcow2_co_create_opts(), bdrv_qed_co_create_opts(),
sd_co_create_opts(), vhdx_co_create_opts(), vpc_co_create_opts()
These work, because they create the QDict with
qemu_opts_to_qdict_filtered(), which creates only string scalars.
The function sports a TODO comment asking for better typing; that's
going to be fun. Use qdict_crumple_for_keyval_qiv() to be safe.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter "filename" is deprecated since commit 5c3ad1a6a8, v2.10.0.
Time to get rid of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter "filename" is deprecated since commit 91589d9e5c, v2.10.0.
Time to get rid of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add locks and remove comments about BQL accordingly to
dirty_bitmap_mutex definition in block_int.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QLIST_REMOVE does not require walking the list, and once the "bitmap"
argument is removed from bdrv_do_release_matching_dirty_bitmap_locked
the code simplifies a lot and it is worth inlining everything in the
callers of bdrv_do_release_matching_dirty_bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180326104037.6894-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
All this function is doing will be repeated by
bdrv_do_release_matching_dirty_bitmap_locked, except
resetting bm->persistent. But even that does not matter
because the bitmap will be freed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180323164254.26487-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When signaling a corruption on a read-only image, qcow2 already makes
fatal events non-fatal (i.e., they will not result in the image being
closed, and the image header's corrupt flag will not be set). This is
necessary because we cannot set the corrupt flag on read-only images,
and it is possible because further corruption of read-only images is
impossible.
Inactive images are effectively read-only, too, so we should do the same
for them. bdrv_is_writable() can tell us whether an image can actually
be written to, so use its result instead of !bs->read_only.
(Otherwise, the assert(!(bs->open_flags & BDRV_O_INACTIVE)) in
bdrv_co_pwritev() will fail, crashing qemu.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The throttle block filter can be reopened, and with this it is
possible to change the throttle group that the filter belongs to.
The way the code does that is the following:
- On throttle_reopen_prepare(): create a new ThrottleGroupMember
and attach it to the new throttle group.
- On throttle_reopen_commit(): detach the old ThrottleGroupMember,
delete it and replace it with the new one.
The problem with this is that by replacing the ThrottleGroupMember the
previous value of io_limits_disabled is lost, causing an assertion
failure in throttle_co_drain_end().
This problem can be reproduced by reopening a throttle node:
$QEMU -monitor stdio
-object throttle-group,id=tg0,x-iops-total=1000 \
-blockdev node-name=hd0,driver=qcow2,file.driver=file,file.filename=hd.qcow2 \
-blockdev node-name=root,driver=throttle,throttle-group=tg0,file=hd0,read-only=on
(qemu) block_stream root
block/throttle.c:214: throttle_co_drain_end: Assertion `tgm->io_limits_disabled' failed.
Since we only want to change the throttle group on reopen there's no
need to create a ThrottleGroupMember and discard the old one. It's
easier if we simply detach it from its current group and attach it to
the new one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180608151536.7378-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This assert may fail, because bitmap_table is not initialized. Just
drop it, as it's obvious, that bitmap_table_load sets bitmap_table
parameter only when returning zero.
Reported-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180608101225.2575-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Repairing OFLAG_COPIED is usually safe because it is done after the
refcounts have been repaired. Therefore, it we did not find anyone else
referencing a data or L2 cluster, it makes no sense to not set
OFLAG_COPIED -- and the other direction (clearing OFLAG_COPIED) is
always safe, anyway, it may just induce leaks.
Furthermore, if OFLAG_COPIED is actually consistent with a wrong (leaky)
refcount, we will decrement the refcount with -r leaks, but OFLAG_COPIED
will then be wrong. qemu-img check should not produce images that are
more corrupted afterwards then they were before.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1527085
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180509200059.31125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating a file, we should take the WRITE and RESIZE permissions.
We do not need either for the creation itself, but we do need them for
clearing and resizing it. So we can take the proper permissions by
replacing O_TRUNC with an explicit truncation to 0, and by taking the
appropriate file locks between those two steps.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509215336.31304-3-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
raw_apply_lock_bytes() and raw_check_lock_bytes() currently take a
BDRVRawState *, but they only use the lock_fd field. During image
creation, we do not have a BDRVRawState, but we do have an FD; so if we
want to reuse the functions there, we should modify them to receive only
the FD.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
block/sheepdog.o has a 4M static variable that is 90% of QEMU's whole .bss
section. Replace it with a heap-allocated block, and make it smaller too
since only the inode header is actually being used.
bss size goes down from 4464280 to 269976.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180523160721.14018-3-pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The expression "SD_INODE_SIZE - sizeof(inode.data_vdi_id)" already has a macro
defined for the same value (though with a nicer definition using offsetof).
Replace it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180523160721.14018-2-pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbFSBoAAoJEJykq7OBq3PISpEIAIcMao4/rzinAWXzS+ncK9LO
6FtRVpgutpHaWX2ayySaz5n2CdR3cNMrpCI7sjY2Kw0lrdkqxPgl5n0SWD+VCl4W
7+JLz/uF0iUV8X+99e7WGAjZbm9LSlxgn5AQKfrrwyPf0ZfzoYQ5nBMcQ6xjEeQP
48j2WqJqN9/u8RBD07o11yn0+CE5g56/f12xVjR5ASVodzsAmcZ2OQRMQbM01isU
1mBekJQkDxJkt5l13Rql8+t+vWz8/9BEW2c/eIDKvoayMqYJpdfKv4DqLloIuHnc
3RkquA0zUuKtl7xEnEkH/We7fi4QPGW/vyBN7ychS/zKzZFQrXmwqrAuFSw3dKU=
=vZp+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
# gpg: Signature made Mon 04 Jun 2018 12:20:08 BST
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
main-loop: drop spin_counter
qemu-img: Convert with copy offloading
block-backend: Add blk_co_copy_range
iscsi: Implement copy offloading
iscsi: Create and use iscsi_co_wait_for_task
iscsi: Query and save device designator when opening
file-posix: Implement bdrv_co_copy_range
qcow2: Implement copy offloading
raw: Implement copy offloading
raw: Check byte range uniformly
block: Introduce API for copy offloading
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a BlockBackend wrapper of the BDS interface.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-10-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Issue EXTENDED COPY (LID1) command to implement the copy_range API.
The parameter data construction code is modified from libiscsi's
iscsi-dd.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-9-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This loop is repeated a growing number times. Make a helper.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180601092648.24614-8-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The device designator data returned in INQUIRY command will be useful to
fill in source/target fields during copy offloading. Do this when
connecting to the target and save the data for later use.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-7-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With copy_file_range(2), we can implement the bdrv_co_copy_range
semantics.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-6-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The two callbacks are implemented quite similarly to the read/write
functions: bdrv_co_copy_range_from maps for read and calls into bs->file
or bs->backing depending on the allocation status; bdrv_co_copy_range_to
maps for write and calls into bs->file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-5-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just pass down to ->file.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-4-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't verify the request range against s->size in the I/O callbacks
except for raw_co_pwritev. This is inconsistent (especially for
raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile
make the helper reusable by the coming new callbacks.
Note that in most cases the block layer already verifies the request
byte range against our reported image length, before invoking the driver
callbacks. The exception is during image creating, after
blk_set_allow_write_beyond_eof(blk, true) is called. But in that case,
the requests are not directly from the user or guest. So there is no
visible behavior change in adding the check code.
The int64_t -> uint64_t inconsistency, as shown by the type casting, is
pre-existing due to the interface.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-3-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce the bdrv_co_copy_range() API for copy offloading. Block
drivers implementing this API support efficient copy operations that
avoid reading each block from the source device and writing it to the
destination devices. Examples of copy offload primitives are SCSI
EXTENDED COPY and Linux copy_file_range(2).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-2-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This changes the x-blockdev-create QMP command so that it doesn't block
the monitor and the main loop any more, but starts a background job that
performs the image creation.
The basic job as implemented here is all that is necessary to make image
creation asynchronous and to provide a QMP interface that can be marked
stable, but it still lacks a few features that jobs usually provide: The
job will ignore pause commands and it doesn't publish more than very
basic progress yet (total-progress is 1 and current-progress advances
from 0 to 1 when the driver callbacks returns). These features can be
added later without breaking compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
So far we relied on job->ret and strerror() to produce an error message
for failed jobs. Not surprisingly, this tends to result in completely
useless messages.
This adds a Job.error field that can contain an error string for a
failing job, and a parameter to job_completed() that sets the field. As
a default, if NULL is passed, we continue to use strerror(job->ret).
All existing callers are changed to pass NULL. They can be improved in
separate patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
.bdrv_co_create() is supposed to return 0 on success, but vhdx could
return a positive value instead. Fix this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
.bdrv_co_create() is supposed to return 0 on success, but vdi could
return a positive value instead. Fix this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
MIN_REFCOUNT_CACHE_SIZE is 4 and the cluster size is guaranteed to be
at most 2MB, so the minimum refcount cache size (in bytes) is always
going to fit in a 32-bit integer.
Coverity doesn't know that, and since we're storing the result in a
uint64_t (*refcount_cache_size) it thinks that we need the 64 bits and
that we probably want to do a 64-bit multiplication to prevent the
result from being truncated.
This is a false positive in this case, but it's a fair warning.
We could do a 64-bit multiplication to get rid of it, but since we
know that a 32-bit variable is enough to store this value let's simply
reuse min_refcount_cache, make it a normal int and stop doing casts.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockJob has fields .offset and .len, which are actually misnomers today
because they are no longer tied to block device sizes, but just progress
counters. As such they make a lot of sense in generic Jobs.
This patch moves the fields to Job and renames them to .progress_current
and .progress_total to describe their function better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The transition to the READY state was still performed in the BlockJob
layer, in the same function that sent the BLOCK_JOB_READY QMP event.
This patch brings the state transition to the Job layer and implements
the QMP event using a notifier called from the Job layer, like we
already do for other events related to state transitions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This doesn't actually move any transaction code to Job yet, but it
renames the type for transactions from BlockJobTxn to JobTxn and makes
them contain Jobs rather than BlockJobs
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_finish_sync() doesn't contain anything block job specific any
more, so it can be moved to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the .complete callback that tells a READY job to complete
from BlockJobDriver to JobDriver. The wrapper function job_complete()
doesn't require anything block job specific any more and can be moved
to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_drain() contains a blk_drain() call which cannot be moved to
Job, so add a new JobDriver callback JobDriver.drain which has a common
implementation for all BlockJobs. In addition to this we keep the
existing BlockJobDriver.drain callback that is called by the common
drain implementation for all block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
block_job_cancel_async() did two things that were still block job
specific:
* Setting job->force. This field makes sense on the Job level, so we can
just move it. While at it, rename it to job->force_cancel to make its
purpose more obvious.
* Resetting the I/O status. This can't be moved because generic Jobs
don't have an I/O status. What the function really implements is a
user resume, except without entering the coroutine. Consequently, it
makes sense to call the .user_resume driver callback here which
already resets the I/O status.
The old block_job_cancel_async() has two separate if statements that
check job->iostatus != BLOCK_DEVICE_IO_STATUS_OK and job->user_paused.
However, the former condition always implies the latter (as is
asserted in block_job_iostatus_reset()), so changing the explicit call
of block_job_iostatus_reset() on the former condition with the
.user_resume callback on the latter condition is equivalent and
doesn't need to access any BlockJob specific state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This moves the finalisation of a single job from BlockJob to Job.
Some part of this code depends on job transactions, and job transactions
call this code, we introduce some temporary calls from Job functions to
BlockJob ones. This will be fixed once transactions move to Job, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This renames the BlockJobCreateFlags constants, moves a few JOB_INTERNAL
checks to job_create() and the auto_{finalize,dismiss} fields from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
While we already moved the state related to job pausing to Job, the
functions to do were still BlockJob only. This commit moves them over to
Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
There is nothing block layer specific about block_job_sleep_ns(), so
move the function to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This commit moves some core functions for dealing with the job coroutine
from BlockJob to Job. This includes primarily entering the coroutine
(both for the first and reentering) and yielding explicitly and at pause
points.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move the defer_to_main_loop functionality from BlockJob to Job.
The code can be simplified because we can use job->aio_context in
job_defer_to_main_loop_bh() now, instead of having to access the
BlockDriverState.
Probably taking the data->aio_context lock in addition was already
unnecessary in the old code because we didn't actually make use of
anything protected by the old AioContext except getting the new
AioContext, in case it changed between scheduling the BH and running it.
But it's certainly unnecessary now that the BDS isn't accessed at all
any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We cannot yet move the whole logic around job cancelling to Job because
it depends on quite a few other things that are still only in BlockJob,
but we can move the cancelled field at least.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves reference counting from BlockJob to Job.
In order to keep calling the BlockJob cleanup code when the job is
deleted via job_unref(), introduce a new JobDriver.free callback. Every
block job must use block_job_free() for this callback, this is asserted
in block_job_create().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This moves BlockJob.status and the closely related functions
(block_)job_state_transition() and (block_)job_apply_verb to Job. The
two QAPI enums are renamed to JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves the job_type field from BlockJobDriver to JobDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This is the first step towards creating an infrastructure for generic
background jobs that aren't tied to a block device. For now, Job only
stores its ID and JobDriver, the rest stays in BlockJob.
The following patches will move over more parts of BlockJob to Job if
they are meaningful outside the context of a block job.
BlockJob.driver is now redundant, but this patch leaves it around to
avoid unnecessary churn. The next patches will get rid of almost all of
its uses anyway so that it can be removed later with much less churn.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
In commit 8b9ad56e9c, we removed the code that could result
in our getting to sd_prealloc()'s out_with_err_set label with a
NULL blk pointer. That makes the NULL check in the error-handling
path unnecessary, and Coverity gripes about it (CID 1390636).
Delete the redundant check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c22a03454 QAPIfied option parsing in the NFS block driver, but
forgot to remove all the options we processed. Therefore, we get an
error in bdrv_open_inherit(), which thinks the remaining options are
invalid. Trying to open an NFS image will result in an error like this:
Block protocol 'nfs' doesn't support the option 'server.host'
Remove all options from the QDict to make the NFS driver work again.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180516160816.26259-1-kwolf@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Don't throw away local_err, but propagate it to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20180516161034.27440-1-kwolf@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Update the rest of the filter drivers to support
BDRV_REQ_WRITE_UNCHANGED. They already forward write request flags to
their children, so we just have to announce support for it.
This patch does not cover the replication driver because that currently
does not support flags at all, and because it just grabs the WRITE
permission for its children when it can, so we should be fine just
submitting the incoming WRITE_UNCHANGED requests as normal writes.
It also does not cover format drivers for similar reasons. They all use
bdrv_format_default_perms() as their .bdrv_child_perm() implementation
so they just always grab the WRITE permission for their file children
whenever possible. In addition, it often would be difficult to
ascertain whether incoming unchanging writes end up as unchanging writes
in their files. So we just leave them as normal potentially changing
writes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-7-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We just need to forward it to quorum's children (except in case of a
rewrite because of corruption), but for that we first have to support
flags in child requests at all.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-6-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-5-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This flag signifies that a write request will not change the visible
disk content. With this flag set, it is sufficient to have the
BLK_PERM_WRITE_UNCHANGED permission instead of BLK_PERM_WRITE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-4-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a simple copy-on-read filter driver. It relies on the already
existing COR functionality in the central block layer code, which may be
moved here once we no longer need it there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L2 and refcount caches have default sizes that can be overridden
using the l2-cache-size and refcount-cache-size (an additional
parameter named cache-size sets the combined size of both caches).
Unless forced by one of the aforementioned parameters, QEMU will set
the unspecified sizes so that the L2 cache is 4 times larger than the
refcount cache.
This is based on the premise that the refcount metadata needs to be
only a fourth of the L2 metadata to cover the same amount of disk
space. This is incorrect for two reasons:
a) The amount of disk covered by an L2 table depends solely on the
cluster size, but in the case of a refcount block it depends on
the cluster size *and* the width of each refcount entry.
The 4/1 ratio is only valid with 16-bit entries (the default).
b) When we talk about disk space and L2 tables we are talking about
guest space (L2 tables map guest clusters to host clusters),
whereas refcount blocks are used for host clusters (including
L1/L2 tables and the refcount blocks themselves). On a fully
populated (and uncompressed) qcow2 file, image size > virtual size
so there are more refcount entries than L2 entries.
Problem (a) could be fixed by adjusting the algorithm to take into
account the refcount entry width. Problem (b) could be fixed by
increasing a bit the refcount cache size to account for the clusters
used for qcow2 metadata.
However this patch takes a completely different approach and instead
of keeping a ratio between both cache sizes it assigns as much as
possible to the L2 cache and the remainder to the refcount cache.
The reason is that L2 tables are used for every single I/O request
from the guest and the effect of increasing the cache is significant
and clearly measurable. Refcount blocks are however only used for
cluster allocation and internal snapshots and in practice are accessed
sequentially in most cases, so the effect of increasing the cache is
negligible (even when doing random writes from the guest).
So, make the refcount cache as small as possible unless the user
explicitly asks for a larger one.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 9695182c2eb11b77cb319689a1ebaa4e7c9d6591.1523968389.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>