Allocate buffers locally and release qcow2 lock. Than, reads inside
qcow2_co_preadv_compressed may be done in parallel, however all
decompression is still done synchronously. Let's improve it in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Get rid of it here too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- make it look more like a pair of qcow2_compress - rename the function
and its parameters
- drop extra out_len variable, check filling of output buffer by strm
structure itself
- fix code style
- add some documentation
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compression is done in threads in qcow2.c. We want to do decompression
in the same way, so, firstly, move it to the same file.
The only change is braces around if-body in decompress_buffer, to
satisfy checkpatch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Give explicit size both for source and destination buffers, to make it
similar with decompression path and than cleanly reuse parameter
structure for decompression threads.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use appropriate macro, corresponding to deflateInit2 spec.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit f8d59dfb40
"block/backup: fix fleecing scheme: use serialized writes" fleecing
(specifically reading from backup target, when backup source is in
backing chain of backup target) is safe, because all backup-job writes
to target are serialized. Therefore we don't need additional
synchronization for these reads.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This change is better to understand what kind of block type is being
handled by the code. Using a syntax similar to the DMG documentation is
easier than tracking all hex values assigned to a block type.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit includes the support to new module dmg-lzfse into dmg block
driver. It includes the support for block type ULFO (0x80000007).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit includes the support to lzfse opensource library. With this
library dmg block driver can decompress images with this type of
compression inside.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU dmg support includes zlib and bzip2, but it does not contains lzfse
support. This commit adds the source file to extend compression support
for new DMGs.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Let start from the beginning:
Commit b9e413dd37 (in 2.9)
"block: explicitly acquire aiocontext in aio callbacks that need it"
added pairs of aio_context_acquire/release to mirror_write_complete and
mirror_read_complete, when they were aio callbacks for blk_aio_* calls.
Then, commit 2e1990b26e (in 3.0) "block/mirror: Convert to coroutines"
dropped these blk_aio_* calls, than mirror_write_complete and
mirror_read_complete are not callbacks more, and don't need additional
aiocontext acquiring. Furthermore, mirror_read_complete calls
blk_co_pwritev inside these pair of aio_context_acquire/release, which
leads to the following dead-lock with mirror:
(gdb) info thr
Id Target Id Frame
3 Thread (LWP 145412) "qemu-system-x86" syscall ()
2 Thread (LWP 145416) "qemu-system-x86" __lll_lock_wait ()
* 1 Thread (LWP 145411) "qemu-system-x86" __lll_lock_wait ()
(gdb) bt
#0 __lll_lock_wait ()
#1 _L_lock_812 ()
#2 __GI___pthread_mutex_lock
#3 qemu_mutex_lock_impl (mutex=0x561032dce420 <qemu_global_mutex>,
file=0x5610327d8654 "util/main-loop.c", line=236) at
util/qemu-thread-posix.c:66
#4 qemu_mutex_lock_iothread_impl
#5 os_host_main_loop_wait (timeout=480116000) at util/main-loop.c:236
#6 main_loop_wait (nonblocking=0) at util/main-loop.c:497
#7 main_loop () at vl.c:1892
#8 main
Printing contents of qemu_global_mutex, I see that "__owner = 145416",
so, thr1 is main loop, and now it wants BQL, which is owned by thr2.
(gdb) thr 2
(gdb) bt
#0 __lll_lock_wait ()
#1 _L_lock_870 ()
#2 __GI___pthread_mutex_lock
#3 qemu_mutex_lock_impl (mutex=0x561034d25dc0, ...
#4 aio_context_acquire (ctx=0x561034d25d60)
#5 dma_blk_cb
#6 dma_blk_io
#7 dma_blk_read
#8 ide_dma_cb
#9 bmdma_cmd_writeb
#10 bmdma_write
#11 memory_region_write_accessor
#12 access_with_adjusted_size
#15 flatview_write
#16 address_space_write
#17 address_space_rw
#18 kvm_handle_io
#19 kvm_cpu_exec
#20 qemu_kvm_cpu_thread_fn
#21 qemu_thread_start
#22 start_thread
#23 clone ()
Printing mutex in fr 2, I see "__owner = 145411", so thr2 wants aio
context mutex, which is owned by thr1. Classic dead-lock.
Then, let's check that aio context is hold by mirror coroutine: just
print coroutine stack of first tracked request in mirror job target:
(gdb) [...]
(gdb) qemu coroutine 0x561035dd0860
#0 qemu_coroutine_switch
#1 qemu_coroutine_yield
#2 qemu_co_mutex_lock_slowpath
#3 qemu_co_mutex_lock
#4 qcow2_co_pwritev
#5 bdrv_driver_pwritev
#6 bdrv_aligned_pwritev
#7 bdrv_co_pwritev
#8 blk_co_pwritev
#9 mirror_read_complete () at block/mirror.c:232
#10 mirror_co_read () at block/mirror.c:370
#11 coroutine_trampoline
#12 __start_context
Yes it is mirror_read_complete calling blk_co_pwritev after acquiring
aio context.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If nbd_client_init() fails after we are already connected,
then the server will spam logs with:
Disconnect client, due to: Unexpected end-of-file before all bytes were read
unless we gracefully disconnect before closing the connection.
Ways to trigger this:
$ opts=driver=nbd,export=foo,server.type=inet,server.host=localhost,server.port=10809
$ qemu-img map --output=json --image-opts $opts,read-only=off
$ qemu-img map --output=json --image-opts $opts,x-dirty-bitmap=nosuch:
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181130023232.3079982-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The implementation of x-dirty-bitmap in qemu 3.0 (commit 216ee365)
silently falls back to treating the server as not supporting
NBD_CMD_BLOCK_STATUS if a requested meta_context name was not
negotiated, which in turn means treating the _entire_ image as
data. Since our hack relied on using 'qemu-img map' to view
which portions of the image were dirty by seeing what the
redirected bdrv_block_status() treats as holes, this means
that our fallback treats the entire image as clean. Better
would have been to treat the entire image as dirty, or to fail
to connect because the user's request for a specific context
could not be honored. This patch goes with the latter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181130023232.3079982-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
s->locked_shared_perm is the set of bits locked in the file, which is
the inverse of the permissions actually shared. So we need to pass them
as they are to raw_apply_lock_bytes() instead of inverting them again.
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our code was already checking that we did not attempt to
allocate more clusters than what would fit in an INT64 (the
physical maximimum if we can access a full off_t's worth of
data). But this does not catch smaller limits enforced by
various spots in the qcow2 image description: L1 and normal
clusters of L2 are documented as having bits 63-56 reserved
for other purposes, capping our maximum offset at 64PB (bit
55 is the maximum bit set). And for compressed images with
2M clusters, the cap drops the maximum offset to bit 48, or
a maximum offset of 512TB. If we overflow that offset, we
would write compressed data into one place, but try to
decompress from another, which won't work.
It's actually possible to prove that overflow can cause image
corruption without this patch; I'll add the iotests separately
in the next commit.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't leak 'cluster' in the mapping == NULL case. Found by Coverity
(CID 1055918).
Fixes: 8d9401c279
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The commit for 0e4e4318ea increments QCOW2_OL_MAX_BITNR but does not
add an array entry for QCOW2_OL_BITMAP_DIRECTORY_BITNR to metadata_ol_names[].
As a result, an array dereference of metadata_ol_names[8] in
qcow2_pre_write_overlap_check() could result in a read outside of the array bounds.
Fixes: 0e4e4318ea ('qcow2: add overlap check for bitmap directory')
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1541453919-25973-6-git-send-email-Liam.Merwick@oracle.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The calls to find_mapping_for_cluster() may return NULL but it
isn't always checked for before dereferencing the value returned.
Additionally, add some asserts to cover cases where NULL can't
be returned but which might not be obvious at first glance.
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Message-id: 1541453919-25973-5-git-send-email-Liam.Merwick@oracle.com
[mreitz: Dropped superfluous check of "mapping" following an assertion
that it is not NULL, and fixed some indentation]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The dev_id returned by the call to blk_get_attached_dev_id() in
blk_root_get_parent_desc() can be NULL (an internal call to
object_get_canonical_path may have returned NULL).
Instead of just checking this case before before dereferencing,
adjust blk_get_attached_dev_id() to return the empty string if no
object path can be found (similar to the case when blk->dev is NULL
and an empty string is returned).
Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com>
Message-id: 1541453919-25973-3-git-send-email-Liam.Merwick@oracle.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds configure options to control the following block drivers:
* Bochs
* Cloop
* Dmg
* Qcow (V1)
* Vdi
* Vvfat
* qed
* parallels
* sheepdog
Each of these defaults to being enabled.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20181107063644.2254-1-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The lock_fd field is not strictly necessary because transferring locked
bytes from old fd to the new one shouldn't fail anyway. This spares the
user one fd per image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we know we've already locked the bytes, don't do it again; similarly
don't unlock a byte if we haven't locked it. This doesn't change the
behavior, but fixes a corner case explained below.
Libvirt had an error handling bug that an image can get its (ownership,
file mode, SELinux) permissions changed (RHBZ 1584982) by mistake behind
QEMU. Specifically, an image in use by Libvirt VM has:
$ ls -lhZ b.img
-rw-r--r--. qemu qemu system_u:object_r:svirt_image_t:s0:c600,c690 b.img
Trying to attach it a second time won't work because of image locking.
And after the error, it becomes:
$ ls -lhZ b.img
-rw-r--r--. root root system_u:object_r:virt_image_t:s0 b.img
Then, we won't be able to do OFD lock operations with the existing fd.
In other words, the code such as in blk_detach_dev:
blk_set_perm(blk, 0, BLK_PERM_ALL, &error_abort);
can abort() QEMU, out of environmental changes.
This patch is an easy fix to this and the change is regardlessly
reasonable, so do it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use error_report for situations that affect user operation (i.e. we're
actually returning error), and warn_report/warn_report_err when some
less critical error happened but the user operation can still carry on.
For raw_normalize_devicepath, add Error parameter to propagate to
its callers.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If an expression is used to define DEFAULT_CLUSTER_SIZE, when compiled,
it will be embedded as a literal expression in the binary (as the
default value) because it is stringified to mark the size of the default
value. Now this is fixed by using a defined number to define this value.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If read-only=off, but auto-read-only=on is given, open the volume
read-write if we have the permissions, but instead of erroring out for
read-only volumes, just degrade to read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If read-only=off, but auto-read-only=on is given, open the file
read-write if we have the permissions, but instead of erroring out for
read-only files, just degrade to read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
If read-only=off, but auto-read-only=on is given, just degrade to
read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If read-only=off, but auto-read-only=on is given, open the file
read-write if we have the permissions, but instead of erroring out for
read-only files, just degrade to read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If read-only=off, but auto-read-only=on is given, open a read-write NBD
connection if the server provides a read-write export, but instead of
erroring out for read-only exports, just degrade to read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Some block drivers have traditionally changed their node to read-only
mode without asking the user. This behaviour has been marked deprecated
since 2.11, expecting users to provide an explicit read-only=on option.
Now that we have auto-read-only=on, enable these drivers to make use of
the option.
This is the only use of bdrv_set_read_only(), so we can make it a bit
more specific and turn it into a bdrv_apply_auto_read_only() that is
more convenient for drivers to use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit e2b8247a32 introduced an error path in qemu_rbd_open() after
calling rbd_open(), but neglected to close the image again in this error
path. The error path should contain everything that the regular close
function qemu_rbd_close() contains.
This adds the missing rbd_close() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a management application builds the block graph node by node, the
protocol layer doesn't inherit its read-only option from the format
layer any more, so it must be set explicitly.
Backing files should work on read-only storage, but at the same time, a
block job like commit should be able to reopen them read-write if they
are on read-write storage. However, without option inheritance, reopen
only changes the read-only option for the root node (typically the
format layer), but not the protocol layer, so reopening fails (the
format layer wants to get write permissions, but the protocol layer is
still read-only).
A simple workaround for the problem in the management tool would be to
open the protocol layer always read-write and to make only the format
layer read-only for backing files. However, sometimes the file is
actually stored on read-only storage and we don't know whether the image
can be opened read-write (for example, for NBD it depends on the server
we're trying to connect to). This adds an option that makes QEMU try to
open the image read-write, but allows it to degrade to a read-only mode
without returning an error.
The documentation for this option is consciously phrased in a way that
allows QEMU to switch to a better model eventually: Instead of trying
when the image is first opened, making the read-only flag dynamic and
changing it automatically whenever the first BLK_PERM_WRITE user is
attached or the last one is detached would be much more useful
behaviour.
Unfortunately, this more useful behaviour is also a lot harder to
implement, and libvirt needs a solution now before it can switch to
-blockdev, so let's start with this easier approach for now.
Instead of adding a new auto-read-only option, turning the existing
read-only into an enum (with a bool alternate for compatibility) was
considered, but it complicated the implementation to the point that it
didn't seem to be worth it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The blkverify mode of Quorum only works when the number of children is
exactly two, so any attempt to add a new one must return an error.
quorum_del_child() on the other hand doesn't need any additional check
because decreasing the number of children would make it go under the
vote threshold.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blkverify mode of Quorum can only be enabled if the number of
children is exactly two and the value of vote-threshold is also two.
If the user tries to enable it but the other settings are incorrect
then QEMU simply prints an error message to stderr and carries on
disabling the blkverify setting.
This patch makes quorum_open() fail and return an error in this case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a static function with only one caller, so there's no need to
keep it. Inlining the code in quorum_compare() makes it much simpler.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci.
There are other places where we take the address of a packed member
in this file for other purposes than passing it to a byteswap
function (all the calls to qemu_uuid_*()); we leave those for now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
Patch produced with scripts/coccinelle/inplace-byteswaps.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This doesn't have any practical effect at the moment because the
values of BDRV_SECTOR_SIZE, QCRYPTO_BLOCK_LUKS_SECTOR_SIZE and
QCRYPTO_BLOCK_QCOW_SECTOR_SIZE are all the same (512 bytes), but
future encryption methods could have different requirements.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
This patch was produced with the following spatch script:
@@
expression E;
@@
-be16_to_cpus(&E);
+E = be16_to_cpu(E);
@@
expression E;
@@
-be32_to_cpus(&E);
+E = be32_to_cpu(E);
@@
expression E;
@@
-be64_to_cpus(&E);
+E = be64_to_cpu(E);
@@
expression E;
@@
-cpu_to_be16s(&E);
+E = cpu_to_be16(E);
@@
expression E;
@@
-cpu_to_be32s(&E);
+E = cpu_to_be32(E);
@@
expression E;
@@
-cpu_to_be64s(&E);
+E = cpu_to_be64(E);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
This patch was produced with the following spatch script:
@@
expression E;
@@
-be16_to_cpus(&E);
+E = be16_to_cpu(E);
@@
expression E;
@@
-be32_to_cpus(&E);
+E = be32_to_cpu(E);
@@
expression E;
@@
-be64_to_cpus(&E);
+E = be64_to_cpu(E);
@@
expression E;
@@
-cpu_to_be16s(&E);
+E = cpu_to_be16(E);
@@
expression E;
@@
-cpu_to_be32s(&E);
+E = cpu_to_be32(E);
@@
expression E;
@@
-cpu_to_be64s(&E);
+E = cpu_to_be64(E);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this. Avoid the bug by not using the
"modify in place" byte swapping functions.
There are a few places where the in-place swap function is
used on something other than a packed struct field; we convert
those anyway, for consistency.
This patch was produced with the following spatch script
(and hand-editing to fold a few resulting overlength lines):
@@
expression E;
@@
-be16_to_cpus(&E);
+E = be16_to_cpu(E);
@@
expression E;
@@
-be32_to_cpus(&E);
+E = be32_to_cpu(E);
@@
expression E;
@@
-be64_to_cpus(&E);
+E = be64_to_cpu(E);
@@
expression E;
@@
-cpu_to_be16s(&E);
+E = cpu_to_be16(E);
@@
expression E;
@@
-cpu_to_be32s(&E);
+E = cpu_to_be32(E);
@@
expression E;
@@
-cpu_to_be64s(&E);
+E = cpu_to_be64(E);
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using the vvfat driver with a directory that contains too many files,
QEMU currently crashes. This can be triggered like this for example:
mkdir /tmp/vvfattest
cd /tmp/vvfattest
for ((x=0;x<=513;x++)); do mkdir $x; done
qemu-system-x86_64 -drive \
file.driver=vvfat,file.dir=.,read-only=on,media=cdrom
Seems like read_directory() is changing the mapping->path variable. Make
sure we use the right pointer instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Similarly to merge, it's OK to allow clear operations on disabled
bitmaps, as this condition only means that they are not recording
new writes. We are free to clear it if the user requests it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>