Let's make this file compilable with -Werror=implicit-fallthrough :
Looking at the code, it seems like the fallthrough is intended here,
so we should add the corresponding "/* fallthrough */" comment here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200911125301.413081-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to use inclusive terminology, rename host_tsx_blacklisted()
as host_tsx_broken().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200910070131.435543-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
-----BEGIN PGP SIGNATURE-----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=Hm7N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200908' into staging
ppc patch queue 2020-09-08
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
# gpg: Signature made Tue 08 Sep 2020 06:19:34 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200908: (33 commits)
spapr_numa: use spapr_numa_get_vcpu_assoc() in home_node hcall
spapr_numa: create a vcpu associativity helper
spapr: move h_home_node_associativity to spapr_numa.c
spapr_numa: move NVLink2 associativity handling to spapr_numa.c
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
spapr, spapr_numa: handle vcpu ibm,associativity
spapr: introduce SpaprMachineState::numa_assoc_array
ppc/spapr_nvdimm: turn spapr_dt_nvdimm() static
ppc: introducing spapr_numa.c NUMA code helper
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
target/s390x: Use start-powered-off CPUState property
sparc/sun4m: Use start-powered-off CPUState property
sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
mips/cps: Use start-powered-off CPUState property
ppc/e500: Use start-powered-off CPUState property
ppc/spapr: Use start-powered-off CPUState property
target/arm: Move setting of CPU halted state to generic code
target/arm: Move start-powered-off property to generic CPUState
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup and fill in VMStateDescription.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl9WkbMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/fvQf/UvUOipiXP7vafHI1
Qx3NZ3nJHOMRz58eBDLidSkWgQM7+zHjBo1V5CvtM6Ajywpsn4IFe+4SJb7MVAYq
6BSj2VDMq5fCboL52i3xJyBHTE7yqlb4bV3uNSk7dXwf5QQs0sT9PLYp6TuxjSj5
SLicEron3uCc6Y0Z1tX1yKPjl2Lz5PoZ4Z98m6wZhd/pQbbc23+hMlz91fjyVAs2
d9ZDnfxL71XQeTUb5tOLC2OK0rQJDQzzMSAO4Ilnrg/w6k0LGlP/kvYsHI+qya1q
Rm+iBRGZQoItzkzkL1sWXP5StF9xLPRK60cET0N7vMnwN6sbpd3fOOWhE9EDtDWB
tK0wxQ==
=1+dD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-mb-20200907-2' into staging
Use lookup_and_goto_tb.
Cleanup and fill in VMStateDescription.
# gpg: Signature made Mon 07 Sep 2020 21:01:55 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-mb-20200907-2:
configure: Do not set TARGET_ABI32 for microblaze
target/microblaze: Put MicroBlazeCPUConfig into DisasContext
target/microblaze: Fill in VMStateDescription for cpu
target/microblaze: Move mmu parameters to MicroBlazeCPUConfig
target/microblaze: Treat pvr_regs as constant
target/microblaze: Move pvr regs to MicroBlazeCPUConfig
target/microblaze: Reorg MicroBlazeCPUConfig to minimize holes
target/microblaze: Split out MicroBlazeCPUConfig
target/microblaze: Diagnose invalid insns in delay slots
target/microblaze: Use tcg_gen_lookup_and_goto_ptr
target/microblaze: Force rtid, rted, rtbd to exit
target/microblaze: Handle DISAS_EXIT_NEXT in delay slot
target/microblaze: Replace cpustate_changed with DISAS_EXIT_NEXT
target/microblaze: Introduce DISAS_EXIT_NEXT, DISAS_EXIT_JUMP
target/microblaze: Rename DISAS_UPDATE to DISAS_EXIT
target/microblaze: Rename mmu structs
target/microblaze: Cleanup mb_cpu_do_interrupt
target/microblaze: Renumber D_FLAG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Note that this changes behavior by setting cs->halted to 1 on reset, which
didn't happen before.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-9-bauerman@linux.ibm.com>
[dwg: Fix from Laurent Vivier for user only case]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This change is in a separate patch because it's not so obvious that it
won't cause a regression.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX1aFfQAKCRD3ErUQojoP
X9kAAP9UgEFiOVCQILI7TSHl2moEjQ7x31CA/Bmod6V+eVKM6QD9Gucjy0KC5DWe
PogywA+CdndMLmH71GN/AFrENVqNnws=
=bbqB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The bulk of the translator should not have access to the
complete cpu state, to avoid the temptation to examine bits
that are in run time, but not translation time context.
We do need access to the constant cpu configuration, and
that is sufficient, so put that into DisasContext.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The final 4 fields in MicroBlazeMMU are configuration constants.
Move them into MicroBlazeCPUConfig where they belong.
Remove the leading "c_" from the member names, as that presumably
implied "config", and that should not be explicit in the location.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow gdb to set the values, and don't bother dumping
unchanging values with -d cpu.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These values are constant, and are derived from the other
configuration knobs. Move them into MicroBlazeCPUConfig
to emphasize that they are not variable.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sort the elements by type and size, removing a number of holes
and reducing the size of the entire struct.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This struct was previously unnamed, and defined in MicroBlazeCPU.
Pull it out to its own typedef so that we can reuse it.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These cases result in undefined and undocumented behaviour but the
behaviour is deterministic, i.e cores will not lock-up or expose
security issues. However, RTL will not raise exceptions either.
Therefore, log a GUEST_ERROR and treat these cases as nops, to
avoid corner cases which could put qemu into an invalid state.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Normal indirect jumps, or page-crossing direct jumps, can use
tcg_gen_lookup_and_goto_ptr to avoid returning to the main loop
simply to find an existing TB for the next pc.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These return-from-exception type instructions have modified
MSR to re-enable various forms of interrupt. Force a return
to the main loop.
Consolidate the cleanup of tb_flags into mb_tr_translate_insn.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is legal to put an mts instruction into a delay slot.
We should continue to return to the main loop in that
case so that we recognize any pending interrupts.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than look for the combination of DISAS_NEXT with a separate
variable, go ahead and set is_jmp to the desired state.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like DISAS_EXIT, except we need to update cpu_pc,
either to pc_next or to btarget respectively.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The name "update" suggests that something needs updating, but
this is not the case. Use "exit" to emphasize that nothing
needs doing except to exit.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce typedefs and follow CODING_STYLE for naming.
Rename struct microblaze_mmu to MicroBlazeMMU.
Rename struct microblaze_mmu_lookup to MicroBlazeMMULookup.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reindent; remove dead/commented code.
Use D_FLAG to set ESS[DS].
Sink MSR adjustment for kernel entry, iflags and res_addr clear.
Improve CPU_LOG_INT formatting; report pc and msr before and after.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ESS[DS] is bit 19 in the manual, but the manual uses big-endian bit
numbering. This corresponds to bit 12 in little-endian numbering.
Let the comment about matching the ESR be true by renumbering it.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several problems here that can result in soft lockup,
depending on exactly where an interrupt or exception is delivered:
Include BIMM_FLAG in IFLAGS_TB_MASK, since it needs to follow D_FLAG.
Ensure that iflags is 0 when entering an interrupt/exception handler.
Add mb_cpu_synchronize_from_tb to restore iflags from tb->flags.
The change to t_sync_flags is cosmetic, but makes the code clearer.
This fixes the reported regression in acceptance/replay_kernel.py.
Fixes: 683a247ed7 ("target/microblaze: Store "current" iflags in insn_start")
Tested-by: Thomas Huth <thuth@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200904190842.2282109-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current qemu hppa emulation emulates a PA1.1 CPU, which can only execute
the 32-bit instruction set. For unknown 64-bit instructions, a instruction trap
is sent to the virtual CPU.
This behaviour is correct in the sense that we emulate what the PA1.1
specification says.
But when trying to boot older Linux installation images, e.g.
ftp://parisc.parisc-linux.org/debian-cd/debian-5.0/lenny-5.0.10-hppa-iso-cd/cdimage.debian.org/debian-5010-hppa-netinst.iso
one finds that qemu fails to boot those images.
The problem is, that in the Linux kernel (e.g. 2.6.26) of those old images
64-bit instructions were used by mistake in the fault handlers. The relevant
instructions (the ",*" indicates that it's a 64-bit instruction) I see are:
0: 09 3e 04 29 sub,* sp,r9,r9
0: 08 3d 06 3d add,* ret1,r1,ret1
0: 0a 09 02 61 or,* r9,r16,r1
0: 0a ba 00 3a andcm,* r26,r21,r26
0: 08 33 02 33 and,* r19,r1,r19
The interesting part is, that real physical 32-bit machines (like the 700/64
and B160L - which is the one we emulate) do boot those images and thus seem to
simply ignore the 64-bit flag on those instructions.
The patch below modifies the qemu instruction decoder to ignore the 64-bit flag
too - which is what real 32-bit hardware seems to do. With this modification
qemu now successfully boots those older images too.
I suggest to apply the patch below - even if it does not reflect what the SPEC
says. Instead it increases the compatibility to really existing hardware and
seem to not create problems if we add real PA2.0 support anytime later.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Until now the TLB size was fixed at 256 entries. To allow operating
systems to utilize more TLB entries in the future, we need to tell
firmware how many TLB entries we actually support in the emulation.
Firmware then reports this to the operating system via the
PDC_CACHE_INFO call.
This patch simply does the preparation to allow more TLB entries.
Signed-off-by: Helge Deller <deller@gmx.de>
This reverts commit c24a41bb53.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit dd08ef0318.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889936257.21294.1786224705357428082.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 0c1538cb1a.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935015.21294.1425332462852607813.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 247b18c593.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933756.21294.13999336052652073520.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7b225762c8.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Also fix all the references of pkg_offset.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move the typedef closer to the QOM type checking macros.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-54-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently we have a RXCPU typedef and a RXCPU type checking
macro, but OBJECT_DECLARE* would transform the RXCPU macro into a
function, and the function name would conflict with the typedef
name.
Rename the RXCPU* QOM type check macros to RX_CPU*, so we will
avoid the conflict and make the macro names consistent with the
TYPE_RX_CPU constant name.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-53-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's a typo in the type name of AARCH64_CPU_GET_CLASS. This
was never detected because the macro is not used by any code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-52-ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.
This will make future conversion to OBJECT_DECLARE* easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200825192110.3528606-47-ehabkost@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
User-space programs cannot use the 64-bit lwea/swea instructions.
We can improve code generation and runtime by restricting the
user-only address space to 32-bit.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>