Use the new vector expansion for GVecGen3i.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Take care of properly taking the modulo of the count. We might later
want to come back and create a variant of VERLL where the base register
is 0, resulting in an immediate.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR COUNT TRAILING ZEROES.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Again, part of vector enhancement facility 1. The operation corresponds
to an bitwise equality check.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Part of vector enhancements facility 1, but easy to implement.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Yet another set of variants. Implement it similar to VECTOR MULTIPLY AND
ADD *. At least for one variant we have a gvec helper we can reuse.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Quite some variants to handle. At least handle some 32-bit element
variants via gvec expansion (we could also handle 16/32-bit variants
for ODD and EVEN easily via gvec expansion, but let's keep it simple
for now).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Luckily, we already have gvec helpers for all four cases.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse an existing gvec helper for negating the values.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
A galois field multiplication in field 2 is like binary multiplication,
however instead of doing ordinary binary additions, xor's are performed.
So no carries are considered.
Implement all variants via helpers. s390_vec_sar() and s390_vec_shr()
will be reused later on.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Easy, we can reuse an existing gvec helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Implement it similar to VECTOR COUNT LEADING ZEROS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
For 8/16, use the 32 bit variant and properly subtract the added
leading zero bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
To carry out the comparison, we can reuse the existing gvec comparison
function. In case the CC is to be computed, save the result vector
and compute the CC lazily. The result is a vector consisting of all 1's
for elements that matched and 0's for elements that didn't match.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Fairly easy to implement, we can make use of the existing CC helpers
cmps64 and cmpu64 - we siply have to sign extend the elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Time to introduce read_vec_element_i32 and write_vec_element_i32.
Take proper care of properly adding the carry. We can perform both
additions including the carry via tcg_gen_add2_i32().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR AVERAGE but without sign extension.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Handle 32/64-bit elements via gvec expansion and the 8/16 bits via
ool helpers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Easy, as we can reuse existing gvec helpers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR ADD COMPUTE CARRY, however 128-bit handling only.
Courtesy of Richard H.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Only slightly ugly, perform two additions. At least it is only supported
for 128 bit elements.
Introduce gen_gvec128_4_i64() similar to gen_gvec128_3_i64().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
128-bit handling courtesy of Richard H.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Introduce two types of fancy new helpers that will be reused a couple of
times
1. gen_gvec_fn_3: Call an existing tcg_gen_gvec_X function with 3
parameters, simplifying parameter passing
2. gen_gvec128_3_i64: Call a function that performs 128 bit calculations
using two 64 bit values per vector.
Luckily, for VECTOR ADD we already have everything we need.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This adds the AHB and APB plug and play devices.
They are scanned during the linux boot to discover the various peripheral.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This adds a little bootloader to the leon3_machine when a ram image is
given through the kernel parameter and no bios are provided:
* The UART transmiter is enabled.
* The TIMER is initialized.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The leon3 board is looking for u-boot.bin by default (LEON3_PROM_FILENAME)..
But in the case this file is not found and no other file are given on the
command line we get the following error:
$ ./qemu-system-sparc -M leon3_generic
qemu-system-sparc: Can't read bios image (null)
So use LEON3_PROM_FILENAME instead of filename in case it is NULL to get a
less cryptic message:
$ ./qemu-system-sparc -M leon3_generic
qemu-system-sparc: Can't read bios image 'u-boot.bin'
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The SCC/ESCC will briefly stop asserting an interrupt when the
transmit FIFO is filled.
This code doesn't model the transmit FIFO/shift register so the
pending transmit interrupt is never deasserted which means that an
edge-triggered interrupt controller will never see the low-to-high
transition it needs to raise another interrupt. The practical
consequence of this is that guest firmware with an interrupt service
routine for the ESCC that does not send all of the data it has
immediately will stop sending data if the following sequence of
events occurs:
1. Disable processor interrupts
2. Write a character to the ESCC
3. Add additional characters to a buffer which is drained by the ISR
4. Enable processor interrupts
In this case, the first character will be sent, the interrupt will
fire and the ISR will output the second character. Since the pending
transmit interrupt remains asserted, no additional interrupts will
ever fire.
This behavior was triggered by firmware for an embedded system with a
Z85C30 which necessitated this patch.
This patch fixes that situation by explicitly lowering the IRQ when a
character is written to the buffer and no other interrupts are currently
pending.
Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
If a ccw has CCW_FLAG_SKIP set, and the command is of type
read, read backwards, or sense, no data should be written
to the guest for that command.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516133327.11430-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Coverity notes that the result of object_dynamic_cast() to
SCSIDevice is not checked in s390_gen_initial_iplp(); as
we know that we always have a SCSIDevice in that branch,
we can instead cast via SCSI_DEVICE directly.
Coverity: CID 1401098
Fixes: 44445d8668 ("s390 vfio-ccw: Add bootindex property and IPLB data")
Message-Id: <20190502155516.12415-1-cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The dirty bit is DIRTY_MEMORY_MIGRATION. Correct the comment.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190426020927.25470-1-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
$ ./x86_64-softmmu/qemu-system-x86_64 -sandbox off
qemu-system-x86_64: -sandbox off: There is no option group 'sandbox'
Segmentation fault
Commit 5780760f5e ("seccomp: check TSYNC host capability") wrapped one
use of the sandbox option group to produce a sensible error, it didn't
do the same for another call to qemu_opts_parse_noisily():
(gdb) bt
at util/qemu-option.c:829
#0 0x00000000105b36d8 in opts_parse (list=0x0, params=0x3ffffffffab5 "off", permit_abbrev=true, defaults=false, errp=0x3ffffffff080)
at util/qemu-option.c:829
#1 0x00000000105b3b74 in qemu_opts_parse_noisily (list=<optimized out>, params=<optimized out>, permit_abbrev=<optimized out>) at util/qemu-option.c:890
#2 0x0000000010024964 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:3589
Fixes: 5780760f5e
Cc: david@gibson.dropbear.id.au
Cc: otubo@redhat.com
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190429134757.13570-1-marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In target/i386/hvf/hvf.c, a break statement was probably missing in
`hvf_vcpu_exec()`, in handling EXIT_REASON_HLT.
These lines seemed to be equivalent to `kvm_handle_halt()`.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Message-Id: <087F1D9C-109D-41D1-BE2C-CE5D840C981B@me.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Optimize rotate_x() using tcg_gen_extract_i32(). We can now free the
'sz' tcg_temp earlier. Since it is allocated with tcg_const_i32(),
free it with tcg_temp_free_i32().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190310003428.11723-6-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function gen_get_ccr() returns a tcg_temp created with
tcg_temp_new(). Free it with tcg_temp_free().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190310003428.11723-4-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Switch the m68k target from the old unassigned_access hook
to the transaction_failed hook.
The notable difference is that rather than it being called
for all physical memory accesses which fail (including
those made by DMA devices or by the gdbstub), it is only
called for those made by the CPU via its MMU. (In previous
commits we put in explicit checks for the direct physical
loads made by the target/m68k code which will no longer
be handled by calling the unassigned_access hook.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In get_physical_address(), use address_space_ldl() and
address_space_stl() instead of ldl_phys() and stl_phys().
This allows us to check whether the memory access failed.
For the moment, we simply return -1 in this case;
add a TODO comment that we should ideally generate the
appropriate kind of fault.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In dump_address_map(), use address_space_ldl() instead of ldl_phys().
This allows us to check whether the memory access failed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210165636.28366-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAlzVx4UdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+U1Af/b3cV5d5a1LWRdLgR
71JCPK/M3o43r2U9wCSikteXkmNBEdEoc5+WRk2SuZFLW/JB1DHDY7/gISPIhfoB
ZIza2TxD/QK1CQ5/mMWruKBlyygbYYZgsYaaNsMJRJgicgOSjTN0nuHMbIfv3tAN
mu+IlkD0LdhVjP0fz30Jpew3b3575RCjYxEPM6KQI3RxtQFjZ3FhqV5hKR4vtdP5
yLWJQzwAbaCB3SZUvvp7TN1ZsmeyLpc+Yz/YtRTqQedo7SNWWBKldLhqq4bZnH1I
AkzHbtWIOBrjWJ34ZMAgI5Q56Du9TBbBvCdM9azmrQjSu/2kdsPBPcUyOpnUCsCx
NyXo9g==
=x71l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190510' into staging
Add CPUClass::tlb_fill.
Improve tlb_vaddr_to_host for use by ARM SVE no-fault loads.
# gpg: Signature made Fri 10 May 2019 19:48:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20190510: (27 commits)
tcg: Use tlb_fill probe from tlb_vaddr_to_host
tcg: Remove CPUClass::handle_mmu_fault
tcg: Use CPUClass::tlb_fill in cputlb.c
target/xtensa: Convert to CPUClass::tlb_fill
target/unicore32: Convert to CPUClass::tlb_fill
target/tricore: Convert to CPUClass::tlb_fill
target/tilegx: Convert to CPUClass::tlb_fill
target/sparc: Convert to CPUClass::tlb_fill
target/sh4: Convert to CPUClass::tlb_fill
target/s390x: Convert to CPUClass::tlb_fill
target/riscv: Convert to CPUClass::tlb_fill
target/ppc: Convert to CPUClass::tlb_fill
target/openrisc: Convert to CPUClass::tlb_fill
target/nios2: Convert to CPUClass::tlb_fill
target/moxie: Convert to CPUClass::tlb_fill
target/mips: Convert to CPUClass::tlb_fill
target/mips: Tidy control flow in mips_cpu_handle_mmu_fault
target/mips: Pass a valid error to raise_mmu_exception for user-only
target/microblaze: Convert to CPUClass::tlb_fill
target/m68k: Convert to CPUClass::tlb_fill
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
