We need to implement .bdrv_has_zero_init_truncate() for every block
driver that supports truncation and has a .bdrv_has_zero_init()
implementation.
Implement it the same way each driver implements .bdrv_has_zero_init().
This is at least not any more unsafe than what we had before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Opening a block device on NetBSD has an additional step compared to other OSes,
corresponding to raw_normalize_devicepath. The error message in that function
is slightly different from that in raw_open_common and this was causing spurious
failures in qemu-iotests. However, in general it is not important to know what
exact step was failing, for example in the qemu-iotests case the error message
contains the fairly unequivocal "No such file or directory" text from strerror.
We can thus fix the failures by standardizing on a single error message for
both raw_open_common and raw_normalize_devicepath; in fact, we can even
use error_setg_file_open to make sure the error message is the same as in
the rest of QEMU.
Message-Id: <20190725095920.28419-1-pbonzini@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In some cases buf_align or request_alignment cannot be detected:
1. With Gluster, buf_align cannot be detected since the actual I/O is
done on Gluster server, and qemu buffer alignment does not matter.
Since we don't have alignment requirement, buf_align=1 is the best
value.
2. With local XFS filesystem, buf_align cannot be detected if reading
from unallocated area. In this we must align the buffer, but we don't
know what is the correct size. Using the wrong alignment results in
I/O error.
3. With Gluster backed by XFS, request_alignment cannot be detected if
reading from unallocated area. In this case we need to use the
correct alignment, and failing to do so results in I/O errors.
4. With NFS, the server does not use direct I/O, so both buf_align cannot
be detected. In this case we don't need any alignment so we can use
buf_align=1 and request_alignment=1.
These cases seems to work when storage sector size is 512 bytes, because
the current code starts checking align=512. If the check succeeds
because alignment cannot be detected we use 512. But this does not work
for storage with 4k sector size.
To determine if we can detect the alignment, we probe first with
align=1. If probing succeeds, maybe there are no alignment requirement
(cases 1, 4) or we are probing unallocated area (cases 2, 3). Since we
don't have any way to tell, we treat this as undetectable alignment. If
probing with align=1 fails with EINVAL, but probing with one of the
expected alignments succeeds, we know that we found a working alignment.
Practically the alignment requirements are the same for buffer
alignment, buffer length, and offset in file. So in case we cannot
detect buf_align, we can use request alignment. If we cannot detect
request alignment, we can fallback to a safe value. To use this logic,
we probe first request alignment instead of buf_align.
Here is a table showing the behaviour with current code (the value in
parenthesis is the optimal value).
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 512 (1) 4096 (4096) FAIL
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 512 (4096) 4096 (4096) FAIL
----------------------------------------------------------------------
3 512 512 (1) 512 (512) OK
3 4096 512 (1) 512 (4096) FAIL
----------------------------------------------------------------------
4 512 512 (1) 512 (1) OK
4 4096 512 (1) 512 (1) OK
Same cases with this change:
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 4096 (4096) 4096 (4096) OK
----------------------------------------------------------------------
3 512 4096 (1) 4096 (512) OK
3 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
4 512 4096 (1) 4096 (1) OK
4 4096 4096 (1) 4096 (1) OK
I tested that provisioning VMs and copying disks on local XFS and
Gluster with 4k bytes sector size work now, resolving bugs [1],[2].
I tested also on XFS, NFS, Gluster with 512 bytes sector size.
[1] https://bugzilla.redhat.com/1737256
[2] https://bugzilla.redhat.com/1738657
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Regular kernel block devices (/dev/sda*, /dev/nvme*, etc) don't have
max segment size/max segment count hardware requirements exposed
to the userspace, but rather the kernel block layer
takes care to split the incoming requests that
violate these requirements.
Allowing the kernel to do the splitting allows qemu to avoid
various overheads that arise otherwise from this.
This is especially visible in nbd server,
exposing as a raw file, a mostly empty qcow2 image over the net.
In this case most of the reads by the remote user
won't even hit the underlying kernel block device,
and therefore most of the overhead will be in the
nbd traffic which increases significantly with lower max transfer size.
In addition to that even for local block device
access the peformance improves a bit due to less
traffic between qemu and the kernel when large
transfer sizes are used (e.g for image conversion)
More info can be found at:
https://bugzilla.redhat.com/show_bug.cgi?id=1647104
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD. If so, we have to update BDRVRawState.open_flags
accordingly. Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Show 'falloc' among the allowed values of 'preallocation'
option, only when it is supported (if defined CONFIG_POSIX_FALLOCATE)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-3-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Currently, qemu crashes whenever someone queries the block status of an
unaligned image tail of an O_DIRECT image:
$ echo > foo
$ qemu-img map --image-opts driver=file,filename=foo,cache.direct=on
Offset Length Mapped to File
qemu-img: block/io.c:2093: bdrv_co_block_status: Assertion `*pnum &&
QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset'
failed.
This is because bdrv_co_block_status() checks that the result returned
by the driver's implementation is aligned to the request_alignment, but
file-posix can fail to do so, which is actually mentioned in a comment
there: "[...] possibly including a partial sector at EOF".
Fix this by rounding up those partial sectors.
There are two possible alternative fixes:
(1) We could refuse to open unaligned image files with O_DIRECT
altogether. That sounds reasonable until you realize that qcow2
does necessarily not fill up its metadata clusters, and that nobody
runs qemu-img create with O_DIRECT. Therefore, unpreallocated qcow2
files usually have an unaligned image tail.
(2) bdrv_co_block_status() could ignore unaligned tails. It actually
throws away everything past the EOF already, so that sounds
reasonable.
Unfortunately, the block layer knows file lengths only with a
granularity of BDRV_SECTOR_SIZE, so bdrv_co_block_status() usually
would have to guess whether its file length information is inexact
or whether the driver is broken.
Fixing what raw_co_block_status() returns is the safest thing to do.
There seems to be no other block driver that sets request_alignment and
does not make sure that it always returns aligned values.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
XFS_IOC_ZERO_RANGE does not increase the file length:
$ touch foo
$ xfs_io -c 'zero 0 65536' foo
$ stat -c "size=%s, blocks=%b" foo
size=0, blocks=128
We do want writes beyond the EOF to automatically increase the file
length, however. This is evidenced by the fact that iotest 061 is
broken on XFS since qcow2's check implementation checks for blocks
beyond the EOF.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_replace_child() calls bdrv_check_perm() with error_abort on
loosening permissions. However file-locking operations may fail even
in this case, for example on NFS. And this leads to Qemu crash.
Let's avoid such errors. Note, that we ignore such things anyway on
permission update commit and abort.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We know that the kernel implements a slow fallback code path for
BLKZEROOUT, so if BDRV_REQ_NO_FALLBACK is given, we shouldn't call it.
The other operations we call in the context of .bdrv_co_pwrite_zeroes
should usually be quick, so no modification should be needed for them.
If we ever notice that there are additional problematic cases, we can
still make these conditional as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
* Add 'drop-cache=on|off' option to file-posix.c. The default is on.
Disabling the option fixes a QEMU 3.0.0 performance regression when live
migrating on the same host with cache.direct=off.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJciOSEAAoJEJykq7OBq3PIVSUIAI6r2Mgoi+no4nle8Jf2nZ+W
EnQXnNEFyJA0lKRtqQ2UILD9udVdKd/L1PZu5k/Il/Ralto9Yf3+62brekI7rsss
c3Qusu4LUK6jom2RslRjRIaJ9GilQi/jWezKV/O0VlcsMVemgVHX008EIR+ea1U4
H0/u2kfu04PciKQ5MR2+6aacu9bfmyH1yM2no+aMN5dDu/38PV6JEsf0Zl2agowg
opGepJ7YiDQsxH9IBXrbfm38mBrrY0K2vFzAb9BzTHfBPotGMNIZNJNM2FChRfoM
sTjOIpZz3NDwPEUPQPZxp+7YKRFFYfse1oHtpyh4n1rMQksB019SCGlP9TBhrF0=
=CH5G
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
* Add 'drop-cache=on|off' option to file-posix.c. The default is on.
Disabling the option fixes a QEMU 3.0.0 performance regression when live
migrating on the same host with cache.direct=off.
# gpg: Signature made Wed 13 Mar 2019 11:07:48 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
file-posix: add drop-cache=on|off option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit dd577a26ff ("block/file-posix:
implement bdrv_co_invalidate_cache() on Linux") introduced page cache
invalidation so that cache.direct=off live migration is safe on Linux.
The invalidation takes a significant amount of time when the file is
large and present in the page cache. Normally this is not the case for
cross-host live migration but it can happen when migrating between QEMU
processes on the same host.
On same-host migration we don't need to invalidate pages for correctness
anyway, so an option to skip page cache invalidation is useful. I
investigated optimizing invalidation and detecting same-host migration,
but both are hard to achieve so a user-visible option will suffice.
As a bonus this option means that the cache invalidation feature will
now be detectable by libvirt via QMP schema introspection.
Suggested-by: Neil Skrypuch <neil@tembosocial.com>
Tested-by: Neil Skrypuch <neil@tembosocial.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190307164941.3322-1-stefanha@redhat.com
Message-Id: <20190307164941.3322-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we reopen a BlockDriverState and there is an option that is present
in bs->options but missing from the new set of options then we have to
return an error unless the driver is able to reset it to its default
value.
This patch adds a new 'mutable_opts' field to BlockDriver. This is
a list of runtime options that can be modified during reopen. If an
option in this list is unspecified on reopen then it must be reset (or
return an error).
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, with auto-read-only=on we tried to open the file read-write
first and if that failed, read-only was tried. This is actually not good
enough for libvirt, which gives QEMU SELinux permissions for read-write
only as soon as it actually intends to write to the image. So we need to
be able to switch between read-only and read-write at runtime.
This patch makes auto-read-only dynamic, i.e. the file is opened
read-only as long as no user of the node has requested write
permissions, but it is automatically reopened read-write as soon as the
first writer is attached. Conversely, if the last writer goes away, the
file is reopened read-only again.
bs->read_only is no longer set for auto-read-only=on files even if the
file descriptor is opened read-only because it will be transparently
upgraded as soon as a writer is attached. This changes the output of
qemu-iotests 232.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to be able to dynamically reopen the file read-only or
read-write, depending on the users that are attached, we need to be able
to switch to a different file descriptor during the permission change.
This interacts with reopen, which also creates a new file descriptor and
performs permission changes internally. In this case, the permission
change code must reuse the reopen file descriptor instead of creating a
third one.
In turn, reopen can drop its code to copy file locks to the new file
descriptor because that is now done when applying the new permissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no reason why we can take locks on the new file descriptor only
in raw_reopen_commit() where error handling isn't possible any more.
Instead, we can already do this in raw_reopen_prepare().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll want to access the file descriptor in the reopen_state while
processing permission changes in the context of the repoen.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
This was the last user of aio_worker(), so the function goes away now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No real reason to keep using the callback based mechanism here when the
rest of the file-posix driver is coroutine based. Changing it brings
ioctls more in line with how other request types work.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() for reads and writes isn't boring enough yet. It still does
some postprocessing for handling short reads and turning the result into
the right return value.
However, there is no reason why handle_aiocb_rw() couldn't do the same,
and even without duplicating code between the read and write path. So
move the code there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
aio_worker() doesn't add anything interesting, it's only a useless
indirection. Call the handler function directly instead.
As we know that this handler function is only called from coroutine
context and the coroutine stays around until the worker thread finishes,
we can keep RawPosixAIOData on the stack.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Getting the thread pool of the AioContext of a block node and scheduling
some work in it is an operation that is already done twice, and we'll
get more instances. Factor it out into a separate function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RawPosixAIOData contains a lot of fields for several separate operations
that are to be processed in a worker thread and that need different
parameters. The struct is currently rather unorganised, with unions that
cover some, but not all operations, and even one #define for field names
instead of a union.
Clean this up to have some common fields and a single union. As a side
effect, on x86_64 the struct shrinks from 72 to 48 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->locked_shared_perm is the set of bits locked in the file, which is
the inverse of the permissions actually shared. So we need to pass them
as they are to raw_apply_lock_bytes() instead of inverting them again.
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The lock_fd field is not strictly necessary because transferring locked
bytes from old fd to the new one shouldn't fail anyway. This spares the
user one fd per image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we know we've already locked the bytes, don't do it again; similarly
don't unlock a byte if we haven't locked it. This doesn't change the
behavior, but fixes a corner case explained below.
Libvirt had an error handling bug that an image can get its (ownership,
file mode, SELinux) permissions changed (RHBZ 1584982) by mistake behind
QEMU. Specifically, an image in use by Libvirt VM has:
$ ls -lhZ b.img
-rw-r--r--. qemu qemu system_u:object_r:svirt_image_t:s0:c600,c690 b.img
Trying to attach it a second time won't work because of image locking.
And after the error, it becomes:
$ ls -lhZ b.img
-rw-r--r--. root root system_u:object_r:virt_image_t:s0 b.img
Then, we won't be able to do OFD lock operations with the existing fd.
In other words, the code such as in blk_detach_dev:
blk_set_perm(blk, 0, BLK_PERM_ALL, &error_abort);
can abort() QEMU, out of environmental changes.
This patch is an easy fix to this and the change is regardlessly
reasonable, so do it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use error_report for situations that affect user operation (i.e. we're
actually returning error), and warn_report/warn_report_err when some
less critical error happened but the user operation can still carry on.
For raw_normalize_devicepath, add Error parameter to propagate to
its callers.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If read-only=off, but auto-read-only=on is given, open the file
read-write if we have the permissions, but instead of erroring out for
read-only files, just degrade to read-only.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The file-posix code is used for the "file", "host_device" and
"host_cdrom" drivers, and it allows reopening images. However the only
option that is actually processed is "x-check-cache-dropped", and
changes in all other options (e.g. "filename") are silently ignored:
(qemu) qemu-io virtio0 "reopen -o file.filename=no-such-file"
While we could allow changing some of the other options, let's keep
things as they are for now but return an error if the user tries to
change any of them.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default value of x-check-cache-dropped is false. There's no reason
to use the previous value as a default in raw_reopen_prepare() because
bdrv_reopen_queue_child() already takes care of putting the old
options in the BDRVReopenState.options QDict.
If x-check-cache-dropped was previously set but is now missing from
the reopen QDict then it should be reset to false.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,
-device scsi-disk,drive=drive-1: Failed to get shared "write" lock
Is another process using the image?
could refer to either the overlay image or its backing image.
Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BLKDISCARD ioctl doesn't guarantee that the discarded blocks read as
all-zero afterwards, so don't try to abuse it for zero writing. We try
to only use this if BLKDISCARDZEROES tells us that it is safe, but this
is unreliable on older kernels and a constant 0 in newer kernels. In
other words, this code path is never actually used with newer kernels,
so we don't even try to unmap while writing zeros.
This patch removes the abuse of discard for writing zeroes from
file-posix and instead adds a new function that uses interfaces that are
actually meant to deallocate and zero out at the same time. Only if
those fail, it falls back to zeroing out without unmap. We never fall
back to a discard operation any more that may or may not result in
zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In ed6e2161 ("linux-aio: properly bubble up errors from initialzation"),
I only added a bdrv_attach_aio_context callback for the bdrv_file
driver. There are several other drivers that use the shared
aio_plug callback, though, and they will trip the assertion added to
aio_get_linux_aio because they did not call aio_setup_linux_aio first.
Add the appropriate callback definition to the affected driver
definitions.
Fixes: ed6e2161 ("linux-aio: properly bubble up errors from initialization")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180718211256.29774-1-naravamudan@digitalocean.com
Cc: Eric Blake <eblake@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adjust each caller of raw_open_common to specify if they are expecting
host and character devices or not. Tighten expectations of file types upon
open in the common code and refuse types that are not expected.
This has two effects:
(1) Character and block devices are now considered deprecated for the
'file' driver, which expects only S_IFREG, and
(2) no file-posix driver (file, host_cdrom, or host_device) can open
directories now.
I don't think there's a legitimate reason to open directories as if
they were files. This prevents QEMU from opening and attempting to probe
a directory inode, which can break in exciting ways. One of those ways
is lseek on ext4/xfs, which will return 0x7fffffffffffffff as the file
size instead of EISDIR. This can coax QEMU into responding with a
confusing "file too big" instead of "Hey, that's not a file".
See: https://bugs.launchpad.net/qemu/+bug/1739304/
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few trace points that can help reveal what is happening in a copy
offloading I/O path.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With in one module, trace points usually have a common prefix named
after the module name. paio_submit and paio_submit_co are the only two
trace points so far in the two file protocol drivers. As we are adding
more, having a common prefix here is better so that trace points can be
enabled with a glob. Rename them.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
One of them is a typo. But update both to be more readable.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180702025836.20957-3-famz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Closing the FD does not necessarily mean that it is unlocked. Fix this
by relinquishing all permission locks before qemu_close().
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_apply_lock_bytes() takes a bit mask of "permissions that are NOT
shared".
Also, make the "perm" and "shared" variables uint64_t, because I do not
particularly like using ~ on signed integers (and other permission masks
are usually uint64_t, too).
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
EINTR should be checked against errno, not ret. While fixing the bug,
collect the branches with a switch block.
Also, change the return value from -ENOSTUP to -ENOSPC when the actual
issue is request range passes EOF, which should be distinguishable from
the case of error == ENOSYS by the caller, so that it could still retry
with other byte ranges, whereas it shouldn't retry anymore upon ENOSYS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies file-posix by implementing the coroutine variants of
the discard and flush BlockDriver callbacks. These were the last
remaining users of paio_submit(), which can be removed now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves the code to resize an image file to the thread pool to avoid
blocking.
Creating large images with preallocation with blockdev-create is now
actually a background job instead of blocking the monitor (and most
other things) until the preallocation has completed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
laio_init() can fail for a couple of reasons, which will lead to a NULL
pointer dereference in laio_attach_aio_context().
To solve this, add a aio_setup_linux_aio() function which is called
early in raw_open_common. If this fails, propagate the error up. The
signature of aio_get_linux_aio() was not modified, because it seems
preferable to return the actual errno from the possible failing
initialization calls.
Additionally, when the AioContext changes, we need to associate a
LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context
callback and call the new aio_setup_linux_aio(), which will allocate a
new AioContext if needed, and return errors on failures. If it fails for
any reason, fallback to threaded AIO with an error message, as the
device is already in-use by the guest.
Add an assert that aio_get_linux_aio() cannot return NULL.
Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com>
Message-id: 20180622193700.6523-1-naravamudan@digitalocean.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When creating a file, we should take the WRITE and RESIZE permissions.
We do not need either for the creation itself, but we do need them for
clearing and resizing it. So we can take the proper permissions by
replacing O_TRUNC with an explicit truncation to 0, and by taking the
appropriate file locks between those two steps.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509215336.31304-3-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
raw_apply_lock_bytes() and raw_check_lock_bytes() currently take a
BDRVRawState *, but they only use the lock_fd field. During image
creation, we do not have a BDRVRawState, but we do have an FD; so if we
want to reuse the functions there, we should modify them to receive only
the FD.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180509215336.31304-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With copy_file_range(2), we can implement the bdrv_co_copy_range
semantics.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-6-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
mincore(2) checks whether pages are resident. Use it to verify that
page cache has been dropped.
You can trigger a verification failure by mmapping the image file from
another process that loads a byte from a page, forcing it to become
resident. bdrv_co_invalidate_cache() will fail while that process is
alive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180427162312.18583-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On Linux posix_fadvise(POSIX_FADV_DONTNEED) invalidates pages*. Use
this to drop page cache on the destination host during shared storage
migration. This way the destination host will read the latest copy of
the data and will not use stale data from the page cache.
The flow is as follows:
1. Source host writes out all dirty pages and inactivates drives.
2. QEMU_VM_EOF is sent on migration stream.
3. Destination host invalidates caches before accessing drives.
This patch enables live migration even with -drive cache.direct=off.
* Terms and conditions may apply, please see patch for details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180427162312.18583-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Storing the lseek() result in an int results in it overflowing when the
file is at least 2 GB big. Then, we have a 50 % chance of the result
being "negative" and thus thinking an error occurred when actually
everything went just fine.
So we should use the correct type for storing the result: off_t.
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1549231
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180228131315.30194-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In commit 223a23c198, we implemented a
workaround in the gluster driver to handle invalid values returned for
SEEK_DATA or SEEK_HOLE.
In some instances, these same invalid values can be seen in the posix
file handler as well - for example, it has been reported on FUSE gluster
mounts.
Calling assert() for these invalid values is overly harsh; we can safely
return -EIO and allow this case to be treated as a "learned nothing"
case (e.g., D4 / H4, as commented in the code).
This patch does the same thing that 223a23c198 did for gluster.c,
except in file-posix.c
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_truncate() is called, but the requested size is the same as
before, don't call posix_fallocate(), which returns -EINVAL for length
zero and would therefore make bdrv_truncate() fail.
The problem can be triggered by creating a zero-sized raw image with
'falloc' preallocation mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds the .bdrv_co_create driver callback to file, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cf ("block: make
bdrv_create adopt coroutine").
Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation. This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the file protocol driver accordingly.
In want_zero mode, we continue to report fine-grained hole
information (the caller wants as much mapping detail as possible);
but when not in that mode, the caller prefers larger *pnum and
merely cares about what offsets are allocated at this layer, rather
than where the holes live. Since holes still read as zeroes at
this layer (rather than deferring to a backing layer), we can take
the shortcut of skipping lseek(), and merely state that all bytes
are allocated.
We can also drop redundant bounds checks that are already
guaranteed by the block layer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP. Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional. Let's audit how they were set:
crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_
nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)
file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met
qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss
all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough
Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field. For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in bca80059e. For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
People get surprised when, after "qemu-img create -f raw /dev/sdX", they
still see qcow2 with "qemu-img info", if previously the bdev had a qcow2
header. While this is natural because raw doesn't need to write any
magic bytes during creation, hdev_create is free to clear out the first
sector to make sure the stale qcow2 header doesn't cause such confusion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.
As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.
The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands. For example:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
or:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now. For example, a pr-manager could:
- talk directly to the multipath daemon from a privileged QEMU
(i.e. QEMU links to libmpathpersist); this makes reservation work
properly with multipath, but still requires CAP_SYS_RAWIO
- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)
- more interestingly, implement reservations directly in QEMU
through file system locks or a shared database (e.g. sqlite)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
It is reported that on Windows Subsystem for Linux, ofd operations fail
with -EINVAL. In other words, QEMU binary built with system headers that
exports F_OFD_SETLK doesn't necessarily run in an environment that
actually supports it:
$ qemu-system-aarch64 ... -drive file=test.vhdx,if=none,id=hd0 \
-device virtio-blk-pci,drive=hd0
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to unlock byte 100
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to unlock byte 100
qemu-system-aarch64: -drive file=test.vhdx,if=none,id=hd0: Failed to lock byte 100
As a matter of fact this is not WSL specific. It can happen when running
a QEMU compiled against a newer glibc on an older kernel, such as in
a containerized environment.
Let's do a runtime check to cope with that.
Reported-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Original idea beyond the code in question was the following: we have failed
to write zeroes with fallocate(FALLOC_FL_ZERO_RANGE) as the simplest
approach and via fallocate(FALLOC_FL_PUNCH_HOLE)/fallocate(0). We have the
only chance now: if the request comes beyond end of the file. Thus we
should calculate file length and respect the error code from that op.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
By using raw_regular_truncate() in raw_truncate(), we can now easily
support preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, raw_regular_truncate() is intended for setting the size of a
newly created file. However, we also want to use it for truncating an
existing file in which case only the newly added space (when growing)
should be preallocated.
This also means that if resizing failed, we should try to restore the
original file size. This is important when using preallocation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This functionality is part of raw_create() which we will be able to
reuse nicely in raw_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Variables should be declared at the start of a block, and if a certain
parameter value is not supported it may be better to return -ENOTSUP
instead of -EINVAL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170613202107.10125-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The file drivers' *_parse_filename() implementations just strip the
optional protocol prefix off the filename. However, for e.g.
"file:foo:bar", this would lead to "foo:bar" being stored as the BDS's
filename which looks like it should be managed using the "foo" protocol.
This is especially troublesome if you then try to resolve a backing
filename based on "foo:bar".
This issue can only occur if the stripped part is a relative filename
("file:/foo:bar" will be shortened to "/foo:bar" and having a slash
before the first colon means that "/foo" is not recognized as a protocol
part). Therefore, we can easily fix it by prepending "./" to such
filenames.
Before this patch:
$ ./qemu-img create -f qcow2 backing.qcow2 64M
Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off
cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ ./qemu-img create -f qcow2 -b backing.qcow2 file🔝image.qcow2
Formatting 'file🔝image.qcow2', fmt=qcow2 size=67108864
backing_file=backing.qcow2 encryption=off cluster_size=65536
lazy_refcounts=off refcount_bits=16
$ ./qemu-io file🔝image.qcow2
can't open device file🔝image.qcow2: Could not open backing file:
Unknown protocol 'top'
After this patch:
$ ./qemu-io file🔝image.qcow2
[no error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170522195217.12991-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the block layer takes care to request a lot less permissions
for inactive nodes, the special-casing in file-posix isn't necessary any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This extends the permission bits of op blocker API to external using
Linux OFD locks.
Each permission in @perm and @shared_perm is represented by a locked
byte in the image file. Requesting a permission in @perm is translated
to a shared lock of the corresponding byte; rejecting to share the same
permission is translated to a shared lock of a separate byte. With that,
we use 2x number of bytes of distinct permission types.
virtlockd in libvirt locks the first byte, so we do locking from a
higher offset.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Making this option available even before implementing it will let
converting tests easier: in coming patches they can specify the option
already when necessary, before we actually write code to lock the
images.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On OpenBSD none of the ioctls probe_logical_blocksize() tries
exist, so the variable sector_size is unused. Refactor the
code to avoid this (and reduce the duplicated code).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490279788-12995-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Success for bdrv_flush() means that all previously written data is safe
on disk. For fdatasync(), the best semantics we can hope for on Linux
(without O_DIRECT) is that all data that was written since the last call
was successfully written back. Therefore, and because we can't redo all
writes after a flush failure, we have to give up after a single
fdatasync() failure. After this failure, we would never be able to make
the promise that a successful bdrv_flush() makes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170322210005.16533-1-kwolf@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This fixes a leaked fd introduced in commit 9103f1ce.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following pattern is unsafe:
char buf[32];
ret = read(fd, buf, sizeof(buf));
...
buf[ret] = 0;
If read(2) returns 32 then a byte beyond the end of the buffer is
zeroed.
In practice this buffer overflow does not occur because the sysfs
max_segments file only contains an unsigned short + '\n'. The string is
always shorter than 32 bytes.
Regardless, avoid this pattern because static analysis tools might
complain and it could lead to real buffer overflows if copy-pasted
elsewhere in the codebase.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockLimits.max_transfer can be too high without this fix, guest will
encounter I/O error or even get paused with werror=stop or rerror=stop. The
cause is explained below.
Linux has a separate limit, /sys/block/.../queue/max_segments, which in
the worst case can be more restrictive than the BLKSECTGET which we
already consider (note that they are two different things). So, the
failure scenario before this patch is:
1) host device has max_sectors_kb = 4096 and max_segments = 64;
2) guest learns max_sectors_kb limit from QEMU, but doesn't know
max_segments;
3) guest issues e.g. a 512KB request thinking it's okay, but actually
it's not, because it will be passed through to host device as an
SG_IO req that has niov > 64;
4) host kernel doesn't like the segmenting of the request, and returns
-EINVAL;
This patch checks the max_segments sysfs entry for the host device and
calculates a "conservative" bytes limit using the page size, which is
then merged into the existing max_transfer limit. Guest will discover
this from the usual virtual block device interfaces. (In the case of
scsi-generic, it will be done in the INQUIRY reply interception in
device model.)
The other possibility is to actually propagate it as a separate limit,
but it's not better. On the one hand, there is a big complication: the
limit is per-LUN in QEMU PoV (because we can attach LUNs from different
host HBAs to the same virtio-scsi bus), but the channel to communicate
it in a per-LUN manner is missing down the stack; on the other hand,
two limits versus one doesn't change much about the valid size of I/O
(because guest has no control over host segmenting).
Also, the idea to fall back to bounce buffering in QEMU, upon -EINVAL,
was explored. Unfortunately there is no neat way to ensure the bounce
buffer is less segmented (in terms of DMA addr) than the guest buffer.
Practically, this bug is not very common. It is only reported on a
Emulex (lpfc), so it's okay to get it fixed in the easier way.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>