Function "do_ioctl()" located in file "syscall.c" was missing
an option for TYPE_LONG and TYPE_ULONG. This caused some ioctls
to not be recognised because they had the third argument that was
of type 'long' or 'unsigned long'.
For example:
Since implemented ioctls RTC_IRQP_SET and RTC_EPOCH_SET
are of type IOW(writing type) that have unsigned long as
their third argument, they were not recognised in QEMU
before the changes of this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1579117007-7565-14-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
KCOV_INIT_TRACE ioctl plays the role in kernel coverage tracing.
This ioctl's third argument is of type 'unsigned long', and the
implementation in QEMU is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-13-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
KCOV_ENABLE and KCOV_DISABLE play the role in kernel coverage
tracing. These ioctls do not use the third argument of ioctl()
system call and are straightforward to implement in QEMU.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-12-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
FDFMTBEG, FDFMTTRK, and FDFMTEND ioctls provide means for controlling
formatting of a floppy drive.
FDFMTTRK's third agrument is a pointer to the structure:
struct format_descr {
unsigned int device,head,track;
};
defined in Linux kernel header <linux/fd.h>.
Since all fields of the structure are of type 'unsigned int', there is
no need to define "target_format_descr".
FDFMTBEG and FDFMTEND ioctls do not use the third argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-9-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
FDSETEMSGTRESH, FDSETMAXERRS, and FDGETMAXERRS ioctls are commands
for controlling error reporting of a floppy drive.
FDSETEMSGTRESH's third agrument is a pointer to the structure:
struct floppy_max_errors {
unsigned int
abort, /* number of errors to be reached before aborting */
read_track, /* maximal number of errors permitted to read an
* entire track at once */
reset, /* maximal number of errors before a reset is tried */
recal, /* maximal number of errors before a recalibrate is
* tried */
/*
* Threshold for reporting FDC errors to the console.
* Setting this to zero may flood your screen when using
* ultra cheap floppies ;-)
*/
reporting;
};
defined in Linux kernel header <linux/fd.h>.
Since all fields of the structure are of type 'unsigned int', there is
no need to define "target_floppy_max_errors".
FDSETMAXERRS and FDGETMAXERRS ioctls do not use the third argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-8-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These FS_IOC32_<GET|SET>VERSION ioctls are identical to
FS_IOC_<GET|SET>VERSION ioctls, but without the anomaly of their
number defined as if their third argument is of type long, while
it is treated internally in kernel as is of type int.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These FS_IOC32_<GET|SET>FLAGS ioctls are identical to
FS_IOC_<GET|SET>FLAGS ioctls, but without the anomaly of their
number defined as if their third argument is of type long, while
it is treated internally in kernel as is of type int.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-3-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A very specific thing for these two ioctls is that their code
implies that their third argument is of type 'long', but the
kernel uses that argument as if it is of type 'int'. This anomaly
is recognized also in commit 6080723 (linux-user: Implement
FS_IOC_GETFLAGS and FS_IOC_SETFLAGS ioctls).
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1579214991-19602-2-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With bad luck, we can wind up with no space at all for brk,
which will generally cause the guest malloc to fail.
This bad luck is easier to come by with ET_DYN (PIE) binaries,
where either the stack or the interpreter (ld.so) gets placed
immediately after the main executable.
But there's nothing preventing this same thing from happening
with ET_EXEC (normal) binaries, during probe_guest_base().
In both cases, reserve some extra space via mmap and release
it back to the system after loading the interpreter and
allocating the stack.
The choice of 16MB is somewhat arbitrary. It's enough for libc
to get going, but without being so large that 32-bit guests or
32-bit hosts are in danger of running out of virtual address space.
It is expected that libc will be able to fall back to mmap arenas
after the limited brk space is exhausted.
Launchpad: https://bugs.launchpad.net/qemu/+bug/1749393
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200117230245.5040-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In init_guest_space, we need to mmap guest space. If the return address
of first mmap is not aligned with align, which was set to MAX(SHMLBA,
qemu_host_page_size), we need unmap and a new mmap(space is larger than
first size). The new size is named real_size, which is aligned_size +
qemu_host_page_size. alugned_size is the guest space size. And add a
qemu_host_page_size to avoid memory error when we align real_start
manually (ROUND_UP(real_start, align)). But when SHMLBA >
qemu_host_page_size, the added size will smaller than the size to align,
which can make a mistake(in a mips machine, it appears). So change
real_size from aligned_size +qemu_host_page_size
to aligned_size + align will solve it.
Signed-off-by: Xinyu Li <precinct@mail.ustc.edu.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191213022919.5934-1-precinct@mail.ustc.edu.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Code movement in an upcoming patch will show that this file
was implicitly depending on tcg.h being included indirectly.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Provides a blocking call to read a character from the console using
semihosting.chardev, if specified. This takes some careful command
line options to use stdio successfully as the serial ports, monitor
and semihost all want to use stdio. Here's a sample set of command
line options which share stdio between semihost, monitor and serial
ports:
qemu \
-chardev stdio,mux=on,id=stdio0 \
-serial chardev:stdio0 \
-semihosting-config enable=on,chardev=stdio0 \
-mon chardev=stdio0,mode=readline
This creates a chardev hooked to stdio and then connects all of the
subsystems to it. A shorter mechanism would be good to hear about.
Signed-off-by: Keith Packard <keithp@keithp.com>
Message-Id: <20191104204230.12249-1-keithp@keithp.com>
[AJB: fixed up deadlock, minor commit title reword]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Before we introduce blocking semihosting calls we need to ensure we
can restart the system on semi hosting exception. To be able to do
this the EXCP_SEMIHOST operation should be idempotent until it finally
completes. Practically this means ensureing we only update the pc
after the semihosting call has completed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Keith Packard <keithp@keithp.com>
Convert the final bit of DEBUG_MMAP to a tracepoint and remove the
last remanents of the #ifdef hackery.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-6-alex.bennee@linaro.org>
The CPU_LOG_PAGE flag is woefully underused and could stand to do
extra duty tracking page changes. If the user doesn't want to see the
details as things change they still have the tracepoints available.
We push the locking into log_page_dump and pass a reason for the
banner text.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-5-alex.bennee@linaro.org>
For full details we also want to see where the mmaps end up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-4-alex.bennee@linaro.org>
It is a pain to re-compile when you need to debug and tracepoints are
a fairly low impact way to instrument QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-3-alex.bennee@linaro.org>
It is a pain to re-compile when you need to debug and tracepoints are
a fairly low impact way to instrument QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191205122518.10010-2-alex.bennee@linaro.org>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ARMv8.2 introduced support for Data Cache Clean instructions
to PoP (point-of-persistence) - DC CVAP and PoDP (point-of-deep-persistence)
- DV CVADP. Both specify conceptual points in a memory system where all writes
that are to reach them are considered persistent.
The support provided considers both to be actually the same so there is no
distinction between the two. If none is available (there is no backing store
for given memory) both will result in Data Cache Clean up to the point of
coherency. Otherwise sync for the specified range shall be performed.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-5-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All timestamps were copied to atime instead of to their respective
fields.
Fixes: efa921845c ("linux-user: Add support for translation of statx() syscall")
Signed-off-by: Ariadne Conill <ariadne@dereferenced.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191122174040.569252-1-ariadne@dereferenced.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
stime() has been withdrawn from glibc
(12cbde1dae6f "Use clock_settime to implement stime; withdraw stime.")
Implement the target stime() syscall using host
clock_settime(CLOCK_REALTIME, ...) as it is done internally in glibc.
Tested qemu-ppc/x86_64 with:
#include <time.h>
#include <stdio.h>
int main(void)
{
time_t t;
int ret;
/* date -u -d"2019-11-12T15:11:00" "+%s" */
t = 1573571460;
ret = stime(&t);
printf("ret %d\n", ret);
return 0;
}
# date; ./stime; date
Tue Nov 12 14:18:32 UTC 2019
ret 0
Tue Nov 12 15:11:00 UTC 2019
Buglink: https://bugs.launchpad.net/qemu/+bug/1852115
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191112142556.6335-1-laurent@vivier.eu>
This value is not, as far as I know, used by any linux software,
but it is set by the kernel and is part of the ABI.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-13-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We failed to set the secondary return value in %o1
we failed to advance the PC past the syscall,
we failed to adjust regwptr into the new structure,
we stored the stack pointer into the wrong register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-12-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use WREG_I0 not WREG_O0 in order to properly save the "ins".
The "outs" were saved separately in setup___siginfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191106113318.10226-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
s/UREG_FP/WREG_SP/g
This is non-obvious because the UREG_FP constant is fact wrong.
However, the previous search-and-replace patch made it clear that
UREG_FP expands to WREG_O6, and we can see from the enumeration in
target/sparc/cpu.h that WREG_O6 is in fact WREG_SP, the stack pointer.
The UREG_SP define is unused; remove it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is non-obvious because the UREG constants are in fact wrong.
s/UREG_I/WREG_O/g
s/UREG_O/WREG_I/g
s/UREG_L/WREG_L/g
These substitutions have identical integer values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This fixes a naming bug wherein we used "UREG_FP" to access the
stack pointer. OTOH, the "UREG_FP" constant was also defined
incorrectly such that it *did* reference the stack pointer.
Note that the kernel legitimately uses the name "FP", because it
utilizes the rolled stack window in processing the system call.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191106113318.10226-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This change includes support for all AF_NETLINK socket options up to about
kernel version 5.4 (5.4 is not formally released at the time of writing).
Socket options that were introduced in kernel versions before the oldest
currently stable kernel version are guarded by kernel version macros.
This change has been built under gcc 8.3, and clang 9.0, and it passes
`make check`. The netlink options have been tested by emulating some
non-trival software that uses NETLINK socket options, but they have
not been exaustively verified.
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20191029224310.164025-1-jkz@google.com>
[lv: updated patch according to CODING_STYLE]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To avoid too much duplication add a wrapper that the existing trace
and the new plugin calls can live in. We could move the -strace code
here as well but that is left for a future series as the code is
subtly different between the bsd and linux.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[AJB: wrap in syscall-trace.h, expand commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The CPU loop tagged all the queued signals as QEMU_SI_KILL while it was
filling the `_sigfault` part of `siginfo`: this caused QEMU to copy the
wrong fields over to the userspace program.
Make sure the fault address recorded by the MMU is is stored in the CPU
environment structure.
In case of memory faults store the exception address into `siginfo`.
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-24-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Continue setting, but not relying upon, env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-23-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Begin setting, but not relying upon, env->hflags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191023150057.25731-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the format is not the syscall last argument, a comma is append.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191021114857.20538-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Extract common print_sockfd() from various socket related syscalls.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20191021114857.20538-7-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>