The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
Add regression tests checking that qemu-io fails with non-zero exit code
when reading non-existing file or using the wrong image format.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Message-id: 20170201003120.23378-4-nirsof@gmail.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This helper allows adding tests supporting any format expect the
specified formats. This may be useful to test that many formats behave
in a common way.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Message-id: 20170201003120.23378-3-nirsof@gmail.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The result of openfile was not checked, leading to failure deep in the
actual command with confusing error message, and exiting with exit code 0.
Here is a simple example - trying to read with the wrong format:
$ touch file
$ qemu-io -f qcow2 -c 'read -P 1 0 1024' file; echo $?
can't open device file: Image is not in qcow2 format
no file open, try 'help open'
0
With this patch, we fail earlier with exit code 1:
$ ./qemu-io -f qcow2 -c 'read -P 1 0 1024' file; echo $?
can't open device file: Image is not in qcow2 format
1
Failing earlier, we don't log this error now:
no file open, try 'help open'
But some tests expected it; the line was removed from the test output.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170201003120.23378-2-nirsof@gmail.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test uses NFS and block-stream to force a lookup of a backing
image that has a relative filename, but a full backing image name
with the protocol path intact.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1a7a3d6e6d8af36cd5b47ed6ea93b5a9ededf81b.1485392617.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Trying to create, use, and remove fifos and pidfiles on protocol paths
(e.g. nfs://localhost/scratch/qemu-nbd.pid) is obviously broken.
Use the local $TEST_DIR path before it is 'protocolized' for these
files.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: bb4a731a35bc4ac81fe3db17479dd686315317c7.1485392617.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 'check' program records timings for each test that
is run. These timings are only valid, however, for a
particular format/protocol combination. So if frequently
running 'check' with a variety of different formats or
protocols, the times printed can be very misleading.
Instead of having a single 'check.time' file, maintain
multiple 'check.time-$IMGPROTO-$IMGFMT' files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170103160556.9895-1-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It was broken by efaa7c4eeb when it dropped the device name "image"
from BB API. Now this error message text is updated again, sync it up.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20170119130759.28319-3-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If TEST_DIR is set to /tmp, test case 144 will fail. The reason is that
TEST_DIR resembles 144's test image name tmp.qcow2.
When 144 is testing $TEST_DIR/tmp.qcow2, it wants to replace
$TEST_DIR/tmp.qcow2 to TEST_DIR/tmp.qcow2, but actually it will fail
and get TEST_DIRTEST_DIR.qcow2 in this case.
The fix is just to modify the code to replace $TEST_DIR/ with TEST_DIR/.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Message-id: 20161216054723.96055-2-haoqf@linux.vnet.ibm.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed commit message and dropped superfluous escaping]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This enables byte granularity requests for blkverify, and at the same
time gets us rid of another user of the BDS-level AIO emulation.
The reference output of a test case must be changed because the
verification failure message reports byte offsets instead of sectors
now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qcow2_make_empty() function is reached during 'qemu-img commit',
in order to clear out ALL clusters of an image. However, if the
image cannot use the fast code path (true if the image is format
0.10, or if the image contains a snapshot), the cluster size is
larger than 512, and the image is larger than 2G in size, then our
choice of sector_step causes problems. Since it is not cluster
aligned, but qcow2_discard_clusters() silently ignores an unaligned
head or tail, we are leaving clusters allocated.
Enhance the testsuite to expose the flaw, and patch the problem by
ensuring our step size is aligned.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In some cases it is possible that query-io-status is called just
before the job is completed, causing
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event": "BLOCK_JOB_COMPLETED", "data": {"device": "src", "len": 31457280, "offset": OFFSET, "speed": 0, "type": "mirror", "error": "Operation not permitted"}}
-{"return": []}
+{"return": [{"io-status": "ok", "device": "src", "busy": true, "len": 31457280, "offset": OFFSET, "paused": false, "speed": 0, "ready": false, "type": "mirror"}]}
Assert that the completeion event eventually happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161109162008.27287-1-pbonzini@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Add a regression test for the case found by Vladimir.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478587839-9834-7-git-send-email-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Currently, we only use -machine accel=qtest when qemu is invoked through
the common.qemu functions. However, we always want to use it, so move it
from common.qemu directly into QEMU_OPTIONS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161017183917.8837-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 3ff2f67a changed bdrv_co_flush() so that no flush is issues if
the image hasn't been dirtied since the last flush. This is not quite
correct: The condition should be that the image hasn't been dirtied
since the last _successful_ flush. This patch changes the logic
accordingly.
Without this fix, subsequent bdrv_co_flush() calls would return success
without actually doing anything even though the image is still dirty.
The difference is visible in some blkdebug test cases where error
messages incorrectly disappeared after commit 3ff2f67a.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1478300595-10090-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block-stream command has traditionally used the 'base' parameter
to indicate the image to copy the data from. This test checks that the
'base-node' parameter can also be used for the same purpose.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum children are special in the sense that they're not directly
attached to a block backend but they're not used as backing images
either. However the intermediate block streaming code supports
streaming to them. This is a test case for that scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There's many tests that need Quorum support in order to run. At the
moment each test implements its own check to see if Quorum is
enabled. This patch centralizes all those checks in a new function
called iotests.supports_quorum().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As with test_stream_parallel(), we allow mixing block-stream and
block-commit operations in the same backing chain as long as there's
no overlap among the involved nodes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These test cases check that it's not possible to perform two
block-stream or block-commit operations if there are nodes involved in
both.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case checks that it's possible to launch several stream
operations in parallel in the same snapshot chain, each one involving
a different set of nodes.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds test_stream_intermediate(), similar to test_stream() but
streams to the intermediate image instead.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests the different supported methods to create floppy drives and
how they interact.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477386868-21826-5-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Since the order of keys in JSON filenames is not necessarily fixed, they
should not be compared to fixed strings. This method takes a Python dict
as a reference, parses a given JSON filename and compares both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This gives us more freedom about the fd that is passed to qemu, allowing
us to e.g. pass sockets.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By adding an optional suffix to the files used for communication with a
VM, we can launch multiple VM instances concurrently.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new option "server" to the NBD block driver which accepts a
SocketAddress.
"path", "host" and "port" are still supported as legacy options and are
mapped to their corresponding SocketAddress representation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 076003f5 added configuration for NFS with IMGOPTSSYNTAX enabled,
but it didn't use the right variable name: $TEST_DIR_OPTS doesn't exist.
This fixes the mistake.
However, this doesn't make anything work that was broken before: The
only way to get IMGOPTSSYNTAX is with -luks, but the combination of
-luks and -nfs doesn't get qemu-img create commands right (because
qemu-img create doesn't support --image-opts yet), so even after this
fix some more work would be required to make the tests pass.
Reported-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some (mostly ISP-specific) name servers who will redirect
non-existing domains to special hosts. In this case, we will get a
different error message when trying to connect to such a host, which
breaks test 162.
162 needed this specific error message so it can confirm that qemu was
indeed trying to connect to the user-specified port. However, we can
also confirm this by setting up a local NBD server on exactly that port;
so we can fix the issue by doing just that.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With qemu-nbd's new --fork option, we no longer need to launch it the
hacky way.
Suggested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 093 contains a test that creates a throttling group with
several drives and performs I/O in all of them. This patch adds a new
test that creates a similar setup but only performs I/O in one of the
drives at the same time.
This is useful to test that the round robin algorithm is behaving
properly in these scenarios, and is specifically written using the
regression introduced in 27ccdd5259 as an example.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that QAPI supports boxed types, we can have unions at the top level
of a command, so let's put our real options directly there for
blockdev-add instead of having a single "options" dict that contains the
real arguments.
blockdev-add is still experimental and we already made substantial
changes to the API recently, so we're free to make changes like this
one, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The 'old' dispatch code returned a QERR_MISSING_PARAMETER for missing
parameters, but the qapi qmp_dispatch() code uses
QERR_INVALID_PARAMETER_TYPE.
Improve qapi code to return QERR_MISSING_PARAMETER where
appropriate.
Fix expected error message in iotests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160930095948.3154-4-marcandre.lureau@redhat.com>
[Drop incorrect error_setg() from qmp_input_type_any() and
qmp_input_type_null()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The option whether or not to use a native AIO interface really isn't a
generic option for all drivers, but only applies to the native file
protocols. This patch moves the option in blockdev-add to the
appropriate places (raw-posix and raw-win32).
We still have to keep the flag BDRV_O_NATIVE_AIO for compatibility
because so far the AIO option was usually specified on the wrong layer
(the top-level format driver, which didn't even look at it) and then
inherited by the protocol driver (where it was actually used). We can't
forbid this use except in new interfaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The TODO comment has been addressed a while ago and this is now checked
in raw-posix, so we don't have to special case this in blockdev-add any
more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
With this patch, blockdev-add always works on a node level, i.e. it
creates a BDS, but no BB. Consequently, x-blockdev-del doesn't need the
'device' option any more, but 'node-name' becomes mandatory.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Even for nodes that have a BlockBackend attached, bdrv_get_parent_name()
can return NULL if the BB is anonymous (e.g. it belongs to a block job
or a device that was created with a drive=<node-name> option).
Remove the information from the error message. The user probably knows
already why the node is still in use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Some test cases that used to work with an unattached BlockBackend are
removed, either because they don't make sense with an attached device or
because the equivalent test case with an attached device already exists.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
The test cases that test conflicts between the 'id' option to
blockdev-add and existing block devices or the 'node-name' of the same
command can be removed because it won't be possible to specify this at
the end of the series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We want to remove the 'id' option for blockdev-add. This removes one
user of the option and makes it use only node names.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>