These two methods only have one implementation, and the spec they're
implementing means any other implementation is unlikely, verging on
impossible.
So replace them with simple functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
even though spapr_fixup_cpu_numa_dt() has no effect on FDT
if numa is disabled, don't call it uselessly. It makes it
obvious at call sites that function is needed only when numa
is enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When a LMB hot unplug starts, the current DRC LMB status is stored at
spapr->pending_dimm_unplugs QTAILQ. This queue isn't migrated, thus
if a migration occurs in the middle of a LMB unplug the
spapr_lmb_release callback will lost track of the LMB unplug progress.
This patch implements a new recover function spapr_recover_pending_dimm_state
that is used inside spapr_lmb_release to recover this DRC LMB release
status that is lost during the migration.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Minor stylistic changes, simplify error handling]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pointer drc->detach_cb is being used as a way of informing
the detach() function inside spapr_drc.c which cb to execute. This
information can also be retrieved simply by checking drc->type and
choosing the right callback based on it. In this context, detach_cb
is redundant information that must be managed.
After the previous spapr_lmb_release change, no detach_cb_opaques
are being used by any of the three callbacks functions. This is
yet another information that is now unused and, on top of that, can't
be migrated either.
This patch makes the following changes:
- removal of detach_cb_opaque. the 'opaque' argument was removed from
the callbacks and from the detach() function of sPAPRConnectorClass. The
attribute detach_cb_opaque of sPAPRConnector was removed.
- removal of detach_cb from the detach() call. The function pointer
detach_cb of sPAPRConnector was removed. detach() now uses a
switch(drc->type) to execute the apropriate callback. To achieve this,
spapr_core_release, spapr_lmb_release and spapr_phb_remove_pci_device_cb
callbacks were made public to be visible inside detach().
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The LMB DRC release callback, spapr_lmb_release(), uses an opaque
parameter, a sPAPRDIMMState struct that stores the current LMBs that
are allocated to a DIMM (nr_lmbs). After each call to this callback,
the nr_lmbs is decremented by one and, when it reaches zero, the callback
proceeds with the qdev calls to hot unplug the LMB.
Using drc->detach_cb_opaque is problematic because it can't be migrated in
the future DRC migration work. This patch makes the following changes to
eliminate the usage of this opaque callback inside spapr_lmb_release:
- sPAPRDIMMState was moved from spapr.c and added to spapr.h. A new
attribute called 'addr' was added to it. This is used as an unique
identifier to associate a sPAPRDIMMState to a PCDIMM element.
- sPAPRMachineState now hosts a new QTAILQ called 'pending_dimm_unplugs'.
This queue of sPAPRDIMMState elements will store the DIMM state of DIMMs
that are currently going under an unplug process.
- spapr_lmb_release() will now retrieve the nr_lmbs value by getting the
correspondent sPAPRDIMMState. A helper function called spapr_dimm_get_address
was created to fetch the address of a PCDIMM device inside spapr_lmb_release.
When nr_lmbs reaches zero and the callback proceeds with the qdev hot unplug
calls, the sPAPRDIMMState struct is removed from spapr->pending_dimm_unplugs.
After these changes, the opaque argument for spapr_lmb_release is now
unused and is passed as NULL inside spapr_del_lmbs. This and the other
opaque arguments can now be safely removed from the code.
As an additional cleanup made by this patch, the spapr_del_lmbs function
was merged with spapr_memory_unplug_request. The former was being called
only by the latter and both were small enough to fit one single function.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
[dwg: Minor stylistic cleanups]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows to manage errors before the memory
has started to be hotplugged. We already have
the function for the CPU cores.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Fixed a couple of style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As of pseries-2.7 and later, we require the total number of guest vcpus to
be a multiple of the threads-per-core. pseries-2.6 and earlier machine
types, however, are supposed to allow this for the sake of migration from
old qemu versions which allowed this.
Unfortunately, 8149e29 "pseries: Enforce homogeneous threads-per-core"
broke this by not considering the old machine type case. This fixes it by
only applying the check when the machine type supports hotpluggable cpus.
By not-entirely-coincidence, that corresponds to the same time when we
started enforcing total threads being a multiple of threads-per-core.
Fixes: 8149e2992f
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
If the user explicitely asked for kernel-irqchip support and "xics-kvm"
initialization fails, we shouldn't fallback to emulated "xics" as we
do now. It is also awkward to print an error message when we have an
errp pointer argument.
Let's use the errp argument to report the error and let the caller decide.
This simplifies the code as we don't need a local Error * here.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If we go that far on the path of hot-removing a core and we find out that
the core-id is invalid, then we have a serious bug.
Let's make it explicit with an assert() instead of dereferencing a NULL
pointer.
This fixes Coverity issue CID 1375404.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Consolidate the code that frees HPT into a separate routine
spapr_free_hpt() as the same chunk of code is called from two places.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr_ics_create() function handles errors in a rather convoluted
way, with two local Error * variables. Moreover, failing to parent the
ICS object to the machine should be considered as a bug but it is
currently ignored.
This patch addresses both issues.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function only does hypercall and RTAS-call registration, and thus
never returns an error. This patch adapt the prototype to reflect that.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
it's safe to remove thread node_id != core node_id error
branch as machine_set_cpu_numa_node() also does mismatch
check and is called even before any CPU is created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1494415802-227633-10-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
it will allow switching from cpu_index to core based numa
mapping in follow up patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1494415802-227633-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.
As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.
In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When there are more nodes than available memory to put the minimum
allowed memory by node, all the memory is put on the last node.
This is because we put (ram_size / nb_numa_nodes) &
~((1 << mc->numa_mem_align_shift) - 1); on each node, and in this
case the value is 0. This is particularly true with pseries,
as the memory must be aligned to 256MB.
To avoid this problem, this patch uses an error diffusion algorithm [1]
to distribute equally the memory on nodes.
We introduce numa_auto_assign_ram() function in MachineClass
to keep compatibility between machine type versions.
The legacy function is used with pseries-2.9, pc-q35-2.9 and
pc-i440fx-2.9 (and previous), the new one with all others.
Example:
qemu-system-ppc64 -S -nographic -nodefaults -monitor stdio -m 1G -smp 8 \
-numa node -numa node -numa node \
-numa node -numa node -numa node
Before:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 0 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 0 MB
node 4 cpus: 4
node 4 size: 0 MB
node 5 cpus: 5
node 5 size: 1024 MB
After:
(qemu) info numa
6 nodes
node 0 cpus: 0 6
node 0 size: 0 MB
node 1 cpus: 1 7
node 1 size: 256 MB
node 2 cpus: 2
node 2 size: 0 MB
node 3 cpus: 3
node 3 size: 256 MB
node 4 cpus: 4
node 4 size: 256 MB
node 5 cpus: 5
node 5 size: 256 MB
[1] https://en.wikipedia.org/wiki/Error_diffusion
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170502162955.1610-2-lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: s/ram_size/size/ at numa_default_auto_assign_ram()]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Logic in spapr_populate_pa_features() enables the bit advertising
Hardware Transactional Memory (HTM) in the guest's device tree only when
KVM advertises its availability with the KVM_CAP_PPC_HTM feature.
However, this assumes that the HTM bit is off in the base template used for
the device tree value. That is true for POWER8, but not for POWER9.
It looks like that was accidentally changed in 9fb4541 "spapr: Enable ISA
3.0 MMU mode selection via CAS".
Fixes: 9fb4541f58
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Now that we have added all the infrastructure we can enable a pseries TCG
guest to use radix.
In order to do this we have to add the appropriate bits to the
ibm,arch-vec-5-platform-support vector to represent that we support both
hash and radix mmu models.
A radix guest can now be booted in pseries tcg mode by specifying:
-cpu POWER9
Note that we assume hash, that is we allocate a hpt, until a guest tells
us otherwise via a H_REGISTER_PROCESS_TABLE call with radix specified - in
which case we free the hpt. If we were right and the guest is hash then
there's nothing for us to do.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xics_system_init() does not need 'nr_servers' anymore as it is only
used to define the 'interrupt-controller' node in the device tree. So
let's just compute the value when calling spapr_dt_xics().
This also gives us an opportunity to simplify the xics_system_init()
routine and introduce a specific spapr_ics_create() helper to create
the sPAPR ICS object.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, all the ICPs are created before the CPUs, stored in an array
under the sPAPR machine and linked to the CPU when the core threads
are realized. This modeling brings some complexity when a lookup in
the array is required and it can be simplified by allocating the ICPs
when the CPUs are.
This is the purpose of this proposal which introduces a new 'icp_type'
field under the machine and creates the ICP objects of the right type
(KVM or not) before the PowerPCCPU object are.
This change allows more cleanups : the removal of the icps array under
the sPAPR machine and the removal of the xics_get_cpu_index_by_dt_id()
helper.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the second step to abstract the IRQ 'server' number of the
XICS layer. Now that the prereq cleanups have been done in the
previous patch, we can move down the 'cpu_dt_id' to 'cpu_index'
mapping in the sPAPR machine handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This enables in-kernel handling of H_PUT_TCE_INDIRECT and
H_STUFF_TCE hypercalls. The host kernel support is there since v4.6,
in particular d3695aa4f452
("KVM: PPC: Add support for multiple-TCE hcalls").
H_PUT_TCE is already accelerated and does not need any special enablement.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For a little while around 4.9, Linux kernels that saw the radix bit in
ibm,pa-features would attempt to set up the MMU as if they were a
hypervisor, even if they were a guest, which would cause them to
crash.
Work around this by detecting pre-ISA 3.0 guests by their lack of that
bit in option vector 1, and then removing the radix bit from
ibm,pa-features. Note: This now requires regeneration of that node
after CAS negotiation.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Fix style nits]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the new node, /chosen/ibm,arch-vec-5-platform-support to the
device tree. This allows the guest to determine which modes are
supported by the hypervisor.
Update the option vector processing in h_client_architecture_support()
to handle the new MMU bits. This allows guests to request hash or
radix mode and QEMU to create the guest's HPT at this time if it is
necessary but hasn't yet been done. QEMU will terminate the guest if
it requests an unavailable mode, as required by the architecture.
Extend the ibm,pa-features node with the new ISA 3.0 values
and set the radix bit if KVM supports radix mode. This probably won't
be used directly by guests to determine the availability of radix mode
(that is indicated by the new node added above) but the architecture
requires that it be set when the hardware supports it.
If QEMU is using KVM, and KVM is capable of running in radix mode,
guests can be run in real-mode without allocating a HPT (because KVM
will use a minimal RPT). So in this case, we avoid creating the HPT
at reset time and later (during CAS) create it if it is necessary.
ISA 3.0 guests will now begin to call h_register_process_table(),
which has been added previously.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Strip some unneeded prefix from error messages]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In the next patch, spapr_fixup_cpu_dt() will need to call
spapr_populate_pa_features() so move it's definition up without making
any other changes.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_REGISTER_PROCESS_TABLE H_CALL is used by a guest to indicate to the
hypervisor where in memory its process table is and how translation should
be performed using this process table.
Provide the implementation of this H_CALL for a guest.
We first check for invalid flags, then parse the flags to determine the
operation, and then check the other parameters for valid values based on
the operation (register new table/deregister table/maintain registration).
The process table is then stored in the appropriate location and registered
with the hypervisor (if running under KVM), and the LPCR_[UPRT/GTSE] bits
are updated as required.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Correct missing prototype and uninitialized variable]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the new ioctl, KVM_PPC_GET_RMMU_INFO, to fetch radix MMU
information from KVM and present the page encodings in the device tree
under ibm,processor-radix-AP-encodings. This provides page size
information to the guest which is necessary for it to use radix mode.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Compile fix for 32-bit targets, style nit fix]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also use an 'sPAPRRTCState' attribute under the sPAPR machine to hold
the RTC object. Overall, these changes remove an unnecessary and
implicit dependency on SysBus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For reasons that may be useful in future, CPU core objects, as used on the
pseries machine type have their own nr-threads property, potentially
allowing cores with different numbers of threads in the same system.
If the user/management uses the values specified in query-hotpluggable-cpus
as they're expected to do, this will never matter in pratice. But that's
not actually enforced - it's possible to manually specify a core with
a different number of threads from that in -smp. That will confuse the
platform - most immediately, this can be used to create a CPU thread with
index above max_cpus which leads to an assertion failure in
spapr_cpu_core_realize().
For now, enforce that all cores must have the same, standard, number of
threads.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Running postcopy-test with ASAN produces the following error:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 tests/postcopy-test
...
=================================================================
==23641==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7f1556600000 at pc 0x55b8e9d28208 bp 0x7f1555f4d3c0 sp 0x7f1555f4d3b0
READ of size 8 at 0x7f1556600000 thread T6
#0 0x55b8e9d28207 in htab_save_first_pass /home/elmarco/src/qq/hw/ppc/spapr.c:1528
#1 0x55b8e9d2939c in htab_save_iterate /home/elmarco/src/qq/hw/ppc/spapr.c:1665
#2 0x55b8e9beae3a in qemu_savevm_state_iterate /home/elmarco/src/qq/migration/savevm.c:1044
#3 0x55b8ea677733 in migration_thread /home/elmarco/src/qq/migration/migration.c:1976
#4 0x7f15845f46c9 in start_thread (/lib64/libpthread.so.0+0x76c9)
#5 0x7f157d9d0f7e in clone (/lib64/libc.so.6+0x107f7e)
0x7f1556600000 is located 0 bytes to the right of 2097152-byte region [0x7f1556400000,0x7f1556600000)
allocated by thread T0 here:
#0 0x7f159bb76980 in posix_memalign (/lib64/libasan.so.3+0xc7980)
#1 0x55b8eab185b2 in qemu_try_memalign /home/elmarco/src/qq/util/oslib-posix.c:106
#2 0x55b8eab186c8 in qemu_memalign /home/elmarco/src/qq/util/oslib-posix.c:122
#3 0x55b8e9d268a8 in spapr_reallocate_hpt /home/elmarco/src/qq/hw/ppc/spapr.c:1214
#4 0x55b8e9d26e04 in ppc_spapr_reset /home/elmarco/src/qq/hw/ppc/spapr.c:1261
#5 0x55b8ea12e913 in qemu_system_reset /home/elmarco/src/qq/vl.c:1697
#6 0x55b8ea13fa40 in main /home/elmarco/src/qq/vl.c:4679
#7 0x7f157d8e9400 in __libc_start_main (/lib64/libc.so.6+0x20400)
Thread T6 created by T0 here:
#0 0x7f159bae0488 in __interceptor_pthread_create (/lib64/libasan.so.3+0x31488)
#1 0x55b8eab1d9cb in qemu_thread_create /home/elmarco/src/qq/util/qemu-thread-posix.c:465
#2 0x55b8ea67874c in migrate_fd_connect /home/elmarco/src/qq/migration/migration.c:2096
#3 0x55b8ea66cbb0 in migration_channel_connect /home/elmarco/src/qq/migration/migration.c:500
#4 0x55b8ea678f38 in socket_outgoing_migration /home/elmarco/src/qq/migration/socket.c:87
#5 0x55b8eaa5a03a in qio_task_complete /home/elmarco/src/qq/io/task.c:142
#6 0x55b8eaa599cc in gio_task_thread_result /home/elmarco/src/qq/io/task.c:88
#7 0x7f15823e38e6 (/lib64/libglib-2.0.so.0+0x468e6)
SUMMARY: AddressSanitizer: heap-buffer-overflow /home/elmarco/src/qq/hw/ppc/spapr.c:1528 in htab_save_first_pass
index seems to be wrongly incremented, unless I miss something that
would be worth a comment.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since commit 224245b ("spapr: Add LMB DR connectors"), NUMA node
memory size must be aligned to 256MB (SPAPR_MEMORY_BLOCK_SIZE).
But when "-numa" option is provided without "mem" parameter,
the memory is equally divided between nodes, but 8MB aligned.
This can be not valid for pseries.
In that case we can have:
$ ./ppc64-softmmu/qemu-system-ppc64 -m 4G -numa node -numa node -numa node
qemu-system-ppc64: Node 0 memory size 0x55000000 is not aligned to 256 MiB
With this patch, we have:
(qemu) info numa
3 nodes
node 0 cpus: 0
node 0 size: 1280 MB
node 1 cpus:
node 1 size: 1280 MB
node 2 cpus:
node 2 size: 1536 MB
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bb9986452 "spapr_pci: Advertise access to PCIe extended config space"
allowed guests to access the extended config space of PCI Express devices
via the PAPR interfaces, even though the paravirtualized bus mostly acts
like plain PCI.
However, that patch enabled access unconditionally, including for existing
machine types, which is an unwise change in behaviour. This patch limits
the change to pseries-2.9 (and later) machine types.
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The recent changes on the XICS layer removed the XICSState object to
let the sPAPR machine handle the ICP and ICS directly. The reset of
these objects was previously handled by XICSState, which was a SysBus
device, and to keep the same behavior, the ICP and ICS were assigned
to SysbBus.
But that broke the 'info qtree' command in the monitor. 'qtree'
performs a loop on the children of a bus to print their properties and
SysBus devices are expected to be found under SysBus, which is not the
case anymore.
The fix for this problem is to register reset handlers for the ICP and
ICS objects and stop using SysBus for such devices.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The PPC MMU types are sometimes treated as if they were a bit field
and sometime as if they were an enum which causes maintenance
problems: flipping bits in the MMU type (which is done on both the 1TB
segment and 64K segment bits) currently produces new MMU type
values that are not handled in every "switch" on it, sometimes causing
an abort().
This patch provides some macros that can be used to filter out the
"bit field-like" bits so that the remainder of the value can be
switched on, like an enum. This allows removal of all of the
"degraded" types from the list and should ease maintenance.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a pa-features definition which includes all of the new fields which
have been added, note we don't claim support for any of these new features
at this stage.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ISA v3.00 adds the idea of a partition table which is used to store the
address translation details for all partitions on the system. The partition
table consists of double word entries indexed by partition id where the second
double word contains the location of the process table in guest memory. The
process table is registered by the guest via a h-call.
We need somewhere to store the address of the process table so we add an entry
to the sPAPRMachineState struct called patb_entry to represent the second
doubleword of a single partition table entry corresponding to the current
guest. We need to store this value so we know if the guest is using radix or
hash translation and the location of the corresponding process table in guest
memory. Since we only have a single guest per qemu instance, we only need one
entry.
Since the partition table is technically a hypervisor resource we require that
access to it is abstracted by the virtual hypervisor through the get_patbe()
call. Currently the value of the entry is never set (and thus
defaults to 0 indicating hash), but it will be required to both implement
POWER9 kvm support and tcg radix support.
We also add this field to be migrated as part of the sPAPRMachineState as we
will need it on the receiving side as the guest will never tell us this
information again and we need it to perform translation.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It provides a better monitor output of the ICP and ICS objects, else
the objects are printed out of order.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The ICS object uses a post_load() handler which is implicitly relying
on the fact that the internal state of the ICS and ICP objects has
been restored but this is not guaranteed. So, let's move the code
under the post_load() handler of the machine where we know the objects
have been fully restored.
The icp_resend() handler of the XICSFabric QOM interface is also
removed as it is now obsolete.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XICSState classes are not used anymore. They have now been fully
deprecated by the XICSFabric QOM interface. Do the cleanups.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is nothing left related to the XICS object in the realize
functions of the KVMXICSState and XICSState class. So adapt the
interfaces to call these routines directly from the sPAPR machine init
sequence.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the last step to remove the XICSState abstraction and have the
machine hold all the objects related to interrupts : ICSs and ICPs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The reset of the ICP objects is currently handled by XICS but this can
be done for each individual ICP.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_dt_xics() only needs the number of servers to build the device
tree nodes. Let's change the routine interface to reflect that.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also introduce a xics_icp_get() helper to simplify the changes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let's add two new handlers for ICPs. One is to get an ICP object from
a server number and a second is to resend the irqs when needed.
The icp_resend() handler is a temporary workaround needed by the
ics-simple post_load() handler. It will be removed when the post_load
portion can be done at the machine level.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is not used anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The reset of the ICS objects is currently handled by XICS but this can
be done for each individual ICS. This also reduces the use of the XICS
list of ICS.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Also change the ICPState 'xics' backlink to be a XICSFabric, this
removes the need of using qdev_get_machine() to get the QOM interface
in some of the routines.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add 'ics_get' and 'ics_resend' handlers to the sPAPR machine. These
are relatively simple for a single ICS.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A list of ICS objects was introduced under the XICS object for the
PowerNV machine but, for the sPAPR machine, it brings extra complexity
as there is only a single ICS. To simplify the code, let's add the ICS
pointer under the sPAPR machine and try to reduce the use of this list
where possible.
Also, change the xics_spapr_*() routines to use an ICS object instead
of an XICSState and change their name to reflect that these are
specific to the sPAPR ICS object.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, the ICP (Interrupt Controller Presenter) objects are created by
the 'nr_servers' property handler of the XICS object and a class
handler. They are realized in the XICS object realize routine.
Let's simplify the process by creating the ICP objects along with the
XICS object at the machine level.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Today, the ICS (Interrupt Controller Source) object is created and
realized by the init and realize routines of the XICS object, but some
of the parameters are only known at the machine level.
These parameters are passed from the sPAPR machine to the ICS object
in a rather convoluted way using property handlers and a class handler
of the XICS object. The number of irqs required to allocate the IRQ
state objects in the ICS realize routine is one of them.
Let's simplify the process by creating the ICS object along with the
XICS object at the machine level and link the ICS into the XICS list
of ICSs at this level also. In the sPAPR machine, there is only a
single ICS but that will change with the PowerNV machine.
Also, QOMify the creation of the objects and get rid of the
superfluous code.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently xics - the component of the IBM POWER interrupt controller
representing the overall interrupt fabric / architecture is
represented as a descendent of SysBusDevice. However, this is not
really correct - the xics presents nothing in MMIO space so it should
be an "unattached" device in the current QOM model.
Since this device will always be created by the machine type, not created
specifically from the command line, and because it has no migrated state
it should be safe to move it around the device composition tree.
Therefore this patch changes it to a descendent of TYPE_DEVICE, and
makes it an unattached device. So that its reset handler still gets
called correctly, we add a qdev_set_parent_bus() to attach it to
sysbus. It's not really clear that's correct (instead of using
register_reset()) but it appears to a common technique.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[clg corrected problems with reset]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg folded together and updated commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The pseries machine type implements the behaviour of a PAPR compliant
hypervisor, without actually executing such a hypervisor on the virtual
CPU. To do this we need some hooks in the CPU code to make hypervisor
facilities get redirected to the machine instead of emulated internally.
For hypercalls this is managed through the cpu->vhyp field, which points
to a QOM interface with a method implementing the hypercall.
For the hashed page table (HPT) - also a hypervisor resource - we use an
older hack. CPUPPCState has an 'external_htab' field which when non-NULL
indicates that the HPT is stored in qemu memory, rather than within the
guest's address space.
For consistency - and to make some future extensions easier - this merges
the external HPT mechanism into the vhyp mechanism. Methods are added
to vhyp for the basic operations the core hash MMU code needs: map_hptes()
and unmap_hptes() for reading the HPT, store_hpte() for updating it and
hpt_mask() to retrieve its size.
To match this, the pseries machine now sets these vhyp fields in its
existing vhyp class, rather than reaching into the cpu object to set the
external_htab field.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Some systems can already provide more than 255 hardware threads.
Bumping the QEMU limit to 1024 seems reasonable:
- it has no visible overhead in top;
- the limit itself has no effect on hot paths.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
On POWER, the valid page sizes that the guest can use are bound
to the CPU and not to the memory region. QEMU already has some
fancy logic to find out the right maximum memory size to tell
it to the guest during boot (see getrampagesize() in the file
target/ppc/kvm.c for more information).
However, once we're booted and the guest is using huge pages
already, it is currently still possible to hot-plug memory regions
that does not support huge pages - which of course does not work
on POWER, since the guest thinks that it is possible to use huge
pages everywhere. The KVM_RUN ioctl will then abort with -EFAULT,
QEMU spills out a not very helpful error message together with
a register dump and the user is annoyed that the VM unexpectedly
died.
To avoid this situation, we should check the page size of hot-plugged
DIMMs to see whether it is possible to use it in the current VM.
If it does not fit, we can print out a better error message and
refuse to add it, so that the VM does not die unexpectely and the
user has a second chance to plug a DIMM with a matching memory
backend instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1419466
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix a build error on 32-bit builds with KVM]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace SPAPR specific cores[] array with generic
machine->possible_cpus and store core objects there.
It makes cores bookkeeping similar to x86 cpus and
will allow to unify similar code.
It would allow to replace cpu_index based NUMA node
mapping with iproperty based one (for -device created
cores) since possible_cpus carries board defined
topology/layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_unplug() were essentially spapr_core_unplug_request()
handler that requested CPU removal and registered callback
which did actual cpu core removali but it was called from
spapr_machine_device_unplug() which is intended for actual object
removal. Commit (cf632463 spapr: Memory hot-unplug support)
sort of fixed it introducing spapr_machine_device_unplug_request()
and calling spapr_core_unplug() but it hasn't renamed callback and
by mistake calls it from spapr_machine_device_unplug().
However spapr_machine_device_unplug() isn't ever called for
cpu core since spapr_core_release() doesn't follow expected
hotunplug call flow which is:
1: device_del() ->
hotplug_handler_unplug_request() ->
set destroy_cb()
2: destroy_cb() ->
hotplug_handler_unplug() ->
object_unparent // actual device removal
Fix it by renaming spapr_core_unplug() to spapr_core_unplug_request()
which is called from spapr_machine_device_unplug_request() and
making spapr_core_release() call hotplug_handler_unplug() which
will call spapr_machine_device_unplug() -> spapr_core_unplug()
to remove cpu core.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reveiwed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug/spapr_core_plug/spapr_core_unplug() are managing
wiring CPU core into spapr machine state and not internal CPU core state.
So move them from spapr_cpu_core.c to spapr.c where other similar
(spapr_memory_[foo]plug()) callbacks are located, which also matches
x86 target practice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We are switching BUILD_BUG_ON to verify that it's parameter is a
compile-time constant, and it turns out that some gcc versions
(specifically gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609) are
not smart enough to figure it out for expressions involving local
variables. This is harmless but means that the check is ineffective for
these platforms. To fix, replace the variable with macros.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[dwg: Correct a printf format warning]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is a port to ppc of the i386 commit:
00f4d64 kvmclock: clock should count only if vm is running
We remove timebase_post_load function, and use the VM state
change handler to save and restore the guest_timebase (on stop
and continue).
We keep timebase_pre_save to reduce the clock difference on
migration like in:
6053a86 kvmclock: reduce kvmclock difference on migration
Time base offset has originally been introduced by commit
98a8b52 spapr: Add support for time base offset migration
So while VM is paused, the time is stopped. This allows to have
the same result with date (based on Time Base Register) and
hwclock (based on "get-time-of-day" RTAS call).
Moreover in TCG mode, the Time Base is always paused, so this
patch also adjust the behavior between TCG and KVM.
VM state field "time_of_the_day_ns" is now useless but we keep
it to be able to migrate to older version of the machine.
As vmstate_ppc_timebase structure (with timebase_pre_save() and
timebase_post_load() functions) was only used by vmstate_spapr,
we register the VM state change handler only in ppc_spapr_init().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To continue consolidation of compatibility mode information, this rewrites
the ppc_get_compat_smt_threads() function using the table of compatiblity
modes in target-ppc/compat.c.
It's not a direct replacement, the new ppc_compat_max_threads() function
has simpler semantics - it just returns the number of threads the cpu
model has, taking into account any compatiblity mode it is in.
This no longer takes into account kvmppc_smt_threads() as the previous
version did. That check wasn't useful because we check in
ppc_cpu_realizefn() that CPUs aren't instantiated with more threads
than kvm allows (or if we didn't things will already be broken and
this won't make it any worse).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
When passing through an USB storage device to a pseries guest, it
is currently not possible to automatically boot from the device
if the "bootindex" property has been specified, too (e.g. when using
"-device nec-usb-xhci -device usb-host,hostbus=1,hostaddr=2,bootindex=0"
at the command line). The problem is that QEMU builds a device tree path
like "/pci@800000020000000/usb@0/usb-host@1" and passes it to SLOF
in the /chosen/qemu,boot-list property. SLOF, however, probes the
USB device, recognizes that it is a storage device and thus changes
its name to "storage", and additionally adds a child node for the
SCSI LUN, so the correct boot path in SLOF is something like
"/pci@800000020000000/usb@0/storage@1/disk@101000000000000" instead.
So when we detect an USB mass storage device with SCSI interface,
we've got to adjust the firmware boot-device path properly that
SLOF can automatically boot from the device.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354177
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The H_SIGNAL_SYS_RESET hcall allows a guest CPU to raise a system reset
exception on CPUs within the same guest -- all CPUs, all-but-self, or a
specific CPU (including self).
This has not made its way to a PAPR release yet, but we have an hcall
number assigned.
H_SIGNAL_SYS_RESET = 0x380
Syntax:
hcall(uint64 H_SIGNAL_SYS_RESET, int64 target);
Generate a system reset NMI on the threads indicated by target.
Values for target:
-1 = target all online threads including the caller
-2 = target all online threads except for the caller
All other negative values: reserved
Positive values: The thread to be targeted, obtained from the value
of the "ibm,ppc-interrupt-server#s" property of the CPU in the OF
device tree.
Semantics:
- Invalid target: return H_Parameter.
- Otherwise: Generate a system reset NMI on target thread(s),
return H_Success.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'cpu_version' field in PowerPCCPU is badly named. It's named after the
'cpu-version' device tree property where it is advertised, but that meaning
may not be obvious in most places it appears.
Worse, it doesn't even really correspond to that device tree property. The
property contains either the processor's PVR, or, if the CPU is running in
a compatibility mode, a special "logical PVR" representing which mode.
Rename the cpu_version field, and a number of related variables to
compat_pvr to make this clearer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The pseries machine type is a bit unusual in that it runs a paravirtualized
guest. The guest expects to interact with a hypervisor, and qemu
emulates the functions of that hypervisor directly, rather than executing
hypervisor code within the emulated system.
To implement this in TCG, we need to intercept hypercall instructions and
direct them to the machine's hypercall handlers, rather than attempting to
perform a privilege change within TCG. This is controlled by a global
hook - cpu_ppc_hypercall.
This cleanup makes the handling a little cleaner and more extensible than
a single global variable. Instead, each CPU to have hypercalls intercepted
has a pointer set to a QOM object implementing a new virtual hypervisor
interface. A method in that interface is called by TCG when it sees a
hypercall instruction. It's possible we may want to add other methods in
future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
spapr_h_cas_compose_response() includes a cpu_update parameter which
controls whether it includes updated information on the CPUs in the device
tree fragment returned from the ibm,client-architecture-support (CAS) call.
Providing the updated information is essential when CAS has negotiated
compatibility options which require different cpu information to be
presented to the guest. However, it should be safe to provide in other
cases (it will just override the existing data in the device tree with
identical data). This simplifies the code by removing the parameter and
always providing the cpu update information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Currently the pseries machine has two paths for constructing CPUs. On
newer machine type versions, which support cpu hotplug, it constructs
cpu core objects, which in turn construct CPU threads. For older machine
versions it individually constructs the CPU threads.
This division is going to make some future changes to the cpu construction
harder, so this patch unifies them. Now cpu core objects are always
created. This requires some updates to allow core objects to be created
without a full complement of threads (since older versions allowed a
number of cpus not a multiple of the threads-per-core). Likewise it needs
some changes to the cpu core hot/cold plug path so as not to choke on the
old machine types without hotplug support.
For good measure, we move the cpu construction to its own subfunction,
spapr_init_cpus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Move the generic cpu_synchronize_ functions to the common hw_accel.h header,
in order to prepare for the addition of a second hardware accelerator.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <f5c3cffe8d520011df1c2e5437bb814989b48332.1484045952.git.vpalatin@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we set the initial isolation/allocation state for DRCs
associated with coldplugged LMBs to ISOLATED/UNUSABLE,
respectively, under the assumption that the guest will move this
state to UNISOLATED/USABLE.
In fact, this is only the case for LMBs added via hotplug. For
coldplugged LMBs, the guest actually assumes the initial state to
be UNISOLATED/USABLE.
In practice, this only becomes an issue when we attempt to unplug
one of these LMBs, where the guest kernel will issue an
rtas-get-sensor-state call to check that the corresponding DRC is
in an USABLE state before it will release the LMB back to
QEMU. If the returned state is otherwise, the guest will assume no
further action is needed, which bypasses the QEMU-side cleanup that
occurs during the USABLE->UNUSABLE transition. This results in
LMBs and their corresponding pc-dimm devices to stick around
indefinitely.
This patch fixes the issue by manually setting DRCs associated with
cold-plugged LMBs to UNISOLATED/ALLOCATED, but leaving the hotplug
state untouched. As it turns out, this is analogous to the handling
for cold-plugged CPUs in spapr_core_plug().
Cc: qemu-ppc@nongnu.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration
from qemu-2.7 to the current version. It split the device's MMIO
window into two pieces for 32-bit and 64-bit MMIO.
The patch included backwards compatibility code to convert the old
property into the new format. However, the property value was also
transferred in the migration stream and compared with a (probably
unwise) VMSTATE_EQUAL. So, the "raw" value from 2.7 is compared to
the new style converted value from (pre-)2.8 giving a mismatch and
migration failure.
Along with the actual field that caused the breakage, there are
several other ill-advised VMSTATE_EQUAL()s. To fix forwards
migration, we read the values in the stream into scratch variables and
ignore them, instead of comparing for equality. To fix backwards
migration, we populate those scratch variables in pre_save() with
adjusted values to match the old behaviour.
To permit the eventual possibility of removing this cruft from the
stream, we only include these compatibility fields if a new
'pre-2.8-migration' property is set. We clear it on the pseries-2.8
machine type, which obviously can't be migrated backwards, but set it
on earlier machine type versions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Until very recently, the vmstate for ppc cpus included some poorly
thought out VMSTATE_EQUAL() components, that can easily break
migration compatibility, and did so between qemu-2.6 and later
versions. A hack was recently added which fixes this migration
breakage, but it leaves the unhelpful cruft of these fields in the
migration stream.
This patch adds a new cpu property allowing these fields to be removed
from the stream entirely. For the pseries-2.8 machine type - which
comes after the fix - and for all non-pseries machine types - which
aren't mature enough to care about cross-version migration - we remove
the fields from the stream.
For pseries-2.7 and earlier, The migration hack remains in place,
allowing backwards and forwards migration with the older machine
types.
This restricts the migration compatibility cruft to older machine
types, and at least opens the possibility of eventually deprecating
and removing it entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
With the additional of the OV5_HP_EVT option vector, we now have
certain functionality (namely, memory unplug) that checks at run-time
for whether or not the guest negotiated the option via CAS. Because
we don't currently migrate these negotiated values, we are unable
to unplug memory from a guest after it's been migrated until after
the guest is rebooted and CAS-negotiation is repeated.
This patch fixes this by adding CAS-negotiated options to the
migration stream. We do this using a subsection, since the
negotiated value of OV5_HP_EVT is the only option currently needed
to maintain proper functionality for a running guest.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This changes the *_run_on_cpu APIs (and helpers) to pass data in a
run_on_cpu_data type instead of a plain void *. This is because we
sometimes want to pass a target address (target_ulong) and this fails on
32 bit hosts emulating 64 bit guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161027151030.20863-24-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support to hot remove pc-dimm memory devices.
Since we're introducing a machine-level unplug_request hook, we also
had handling for CPU unplug there as well to ensure CPU unplug
continues to work as it did before.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
* add hooks to CAS/cmdline enablement of hotplug ACR support
* add hook for CPU unplug
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 0a417869:
spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type
dropped per-DRC/per-LMB hotplugs event in favor of a bulk add via a
single LMB count value. This was to avoid overrunning the guest EPOW
event queue with hotplug events. This works fine, but relies on the
guest exhaustively scanning for pluggable LMBs to satisfy the
requested count by issuing rtas-get-sensor(DR_ENTITY_SENSE, ...) calls
until all the LMBs associated with the DIMM are identified.
With newer support for dedicated hotplug event source, this queue
exhaustion is no longer as much of an issue due to implementation
details on the guest side, but we still try to avoid excessive hotplug
events by now supporting both a count and a starting index to avoid
unecessary work. This patch makes use of that approach when the
capability is available.
Cc: bharata@linux.vnet.ibm.com
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds machine options of the form:
-machine pseries,modern-hotplug-events=true
-machine pseries,modern-hotplug-events=false
If false, QEMU will force the use of "legacy" style hotplug events,
which are surfaced through EPOW events instead of a dedicated
hot plug event source, and lack certain features necessary, mainly,
for memory unplug support.
If true, QEMU will enable support for "modern" dedicated hot plug
event source. Note that we will still default to "legacy" style unless
the guest advertises support for the "modern" hotplug events via
ibm,client-architecture-support hcall during early boot.
For pseries-2.7 and earlier we default to false, for newer machine
types we default to true.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hotplug events were previously delivered using an EPOW interrupt
and were queued by linux guests into a circular buffer. For traditional
EPOW events like shutdown/resets, this isn't an issue, but for hotplug
events there are cases where this buffer can be exhausted, resulting
in the loss of hotplug events, resets, etc.
Newer-style hotplug event are delivered using a dedicated event source.
We enable this in supported guests by adding standard an additional
event source in the guest device-tree via /event-sources, and, if
the guest advertises support for the newer-style hotplug events,
using the corresponding interrupt to signal the available of
hotplug/unplug events.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ibm,architecture-vec-5 is supposed to encode all option vector 5 bits
negotiated between platform/guest. Currently we hardcode this property
in the boot-time device tree to advertise a single negotiated
capability, "Form 1" NUMA Affinity, regardless of whether or not CAS
has been invoked or that capability has actually been negotiated.
Improve this by generating ibm,architecture-vec-5 based on the full
set of option vector 5 capabilities negotiated via CAS.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases, ibm,client-architecture-support calls can fail. This
could happen in the current code for situations where the modified
device tree segment exceeds the buffer size provided by the guest
via the call parameters. In these cases, QEMU will reset, allowing
an opportunity to regenerate the device tree from scratch via
boot-time handling. There are potentially other scenarios as well,
not currently reachable in the current code, but possible in theory,
such as cases where device-tree properties or nodes need to be removed.
We currently don't handle either of these properly for option vector
capabilities however. Instead of carrying the negotiated capability
beyond the reset and creating the boot-time device tree accordingly,
we start from scratch, generating the same boot-time device tree as we
did prior to the CAS-generated and the same device tree updates as we
did before. This could (in theory) cause us to get stuck in a reset
loop. This hasn't been observed, but depending on the extensiveness
of CAS-induced device tree updates in the future, could eventually
become an issue.
Address this by pulling capability-related device tree
updates resulting from CAS calls into a common routine,
spapr_dt_cas_updates(), and adding an sPAPROptionVector*
parameter that allows us to test for newly-negotiated capabilities.
We invoke it as follows:
1) When ibm,client-architecture-support gets called, we
call spapr_dt_cas_updates() with the set of capabilities
added since the previous call to ibm,client-architecture-support.
For the initial boot, or a system reset generated by something
other than the CAS call itself, this set will consist of *all*
options supported both the platform and the guest. For calls
to ibm,client-architecture-support immediately after a CAS-induced
reset, we call spapr_dt_cas_updates() with only the set
of capabilities added since the previous call, since the other
capabilities will have already been addressed by the boot-time
device-tree this time around. In the unlikely event that
capabilities are *removed* since the previous CAS, we will
generate a CAS-induced reset. In the unlikely event that we
cannot fit the device-tree updates into the buffer provided
by the guest, well generate a CAS-induced reset.
2) When a CAS update results in the need to reset the machine and
include the updates in the boot-time device tree, we call the
spapr_dt_cas_updates() using the full set of negotiated
capabilities as part of the reset path. At initial boot, or after
a reset generated by something other than the CAS call itself,
this set will be empty, resulting in what should be the same
boot-time device-tree as we generated prior to this patch. For
CAS-induced reset, this routine will be called with the full set of
capabilities negotiated by the platform/guest in the previous
CAS call, which should result in CAS updates from previous call
being accounted for in the initial boot-time device tree.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Changed an int -> bool conversion to be more explicit]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently we access individual bytes of an option vector via
ldub_phys() to test for the presence of a particular capability
within that byte. Currently this is only done for the "dynamic
reconfiguration memory" capability bit. If that bit is present,
we pass a boolean value to spapr_h_cas_compose_response()
to generate a modified device tree segment with the additional
properties required to enable this functionality.
As more capability bits are added, will would need to modify the
code to add additional option vector accesses and extend the
param list for spapr_h_cas_compose_response() to include similar
boolean values for these parameters.
Avoid this by switching to spapr_ovec_* helpers so we can do all
the parsing in one shot and then test for these additional bits
within spapr_h_cas_compose_response() directly.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For historical reasons construction of the guest device tree in spapr is
divided between spapr_create_fdt_skel() which is called at init time, and
spapr_build_fdt() which runs at reset time. Over time, more and more
things have needed to be moved to reset time.
Previous cleanups mean the only things left in spapr_create_fdt_skel() are
the properties of the root node itself. Finish consolidating these two
parts of device tree construction, by moving this to the start of
spapr_build_fdt(), and removing spapr_create_fdt_skel() entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Construction of the /vdevice node (and its children) is divided between
spapr_create_fdt_skel() (at init time), which creates the base node, and
spapr_populate_vdevice() (at reset time) which creates the nodes for each
individual virtual device.
This consolidates both into a single function called from
spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the /hypervisor device tree node is constructed in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, move it to a function called from spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The /event-sources device tree node is built from spapr_create_fdt_skel().
As part of consolidating device tree construction to reset time, this moves
it to spapr_build_fdt().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons construction of the /rtas node in the device
tree (amongst others) is split into several places. In particular
it's split between spapr_create_fdt_skel(), spapr_build_fdt() and
spapr_rtas_device_tree_setup().
In fact, as well as adding the actual RTAS tokens to the device tree,
spapr_rtas_device_tree_setup() just adds the ibm,lrdr-capacity
property, which despite going in the /rtas node, doesn't have a lot to
do with RTAS.
This patch consolidates the code constructing /rtas together into a new
spapr_dt_rtas() function. spapr_rtas_device_tree_setup() is renamed to
spapr_dt_rtas_tokens() and now only adds the token properties.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For historical reasons, building the /chosen node in the guest device tree
is split across several places and includes both parts which write the DT
sequentially and others which use random access functions.
This patch consolidates construction of the node into one place, using
random access functions throughout.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the device tree node for the XICS interrupt controller is in
spapr_create_fdt_skel(). As part of consolidating device tree construction
to reset time, this moves it to a function called from spapr_build_fdt().
In addition we move the actual code into hw/intc/xics_spapr.c with the
rest of the PAPR specific interrupt controller code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
At each system reset, the pseries machine needs to load RTAS (the runtime
portion of the guest firmware) into the VM. This means copying
the actual RTAS code into guest memory, and also updating the device
tree so that the guest OS and boot firmware can locate it.
For historical reasons the copy and update to the device tree were in
different parts of the code. This cleanup brings them both together in
an spapr_load_rtas() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The flattened device tree passed to pseries guests contains a list of
reserved memory areas. Currently we construct this list early in
spapr_create_fdt_skel() as we sequentially write the fdt.
This will be inconvenient for upcoming cleanups, so this patch moves
the reserve map changes to the end of fdt construction. This changes
fdt_add_reservemap_entry() calls - which work when writing the fdt
sequentially to fdt_add_mem_rsv() calls used when altering the fdt in
random access mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently spapr_create_fdt_skel() takes a bunch of individual parameters
for various things it will put in the device tree. Some of these can
already be taken directly from sPAPRMachineState. This patch alters it so
that all of them can be taken from there, which will allow this code to
be moved away from its current caller in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These values are used only within ppc_spapr_reset(), so just change them
to local variables.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
spapr_finalize_fdt() both finishes building the device tree for the guest
and loads it into guest memory. For future cleanups, it's going to be
more convenient to do these two things separately. The loading portion is
pretty trivial, so we move it inline into the caller, ppc_spapr_reset().
We also rename spapr_finalize_fdt(), because the current name is going to
become inaccurate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
- A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
- A 64-bit window which maps onto a large region somewhere high in PCI
address space (traditionally this used an identity mapping from guest
physical address to PCI address, but that's not always the case)
The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however. At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.
This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window. With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.
This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured. The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).
So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified. This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.
For now, this only adds the possibility of 64-bit windows. The default
configuration still uses the legacy mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Currently the default PCI host bridge for the 'pseries' machine type is
constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
guest memory space. This means that if > 1TiB of guest RAM is specified,
the RAM will collide with the PCI IO windows, causing serious problems.
Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
there's a little unused space at the bottom of the area reserved for PCI,
but essentially this means that > 1TiB of RAM has never worked with the
pseries machine type.
This patch fixes this by altering the placement of PHBs on large-RAM VMs.
Instead of always placing the first PHB at 1TiB, it is placed at the next
1 TiB boundary after the maximum RAM address.
Technically, this changes behaviour in a migration-breaking way for
existing machines with > 1TiB maximum memory, but since having > 1 TiB
memory was broken anyway, this seems like a reasonable trade-off.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.
There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows. This gives the most control, but is very awkward with 6
mandatory parameters. Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.
The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO). Obviously, for migration we can only change the
locations on a new machine type, however.
This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.
So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
can do.
For now, this just changes where the calculation is done. It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Rather than machine instances having backward-compatible option
defaults that need to be repeatedly re-enabled for every new machine
type we introduce, we set the defaults appropriate for newer machine
types, then add code to explicitly disable instance options as needed
to maintain compatibility with older machine types.
Currently pseries-2.5 does not inherit from pseries-2.6 in this
fashion, which is okay at the moment since we do not have any
instance compatibility options for pseries-2.6+ currently.
We will make use of this in future patches though, so fix it here.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Extended to make 2.7 inherit from 2.8 as well]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b9841). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff. There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJX5NZnAAoJEGw4ysog2bOSoLEP/1YpRFG/6gmiT+T+Btz1QYcd
eqrJkV63/rY/lvgZOvUBdqA/YKaBSWDOEByNFRZ+Grqz9h5zKrRcmM7IWdRWg+vG
gyrZUm1pscFG20iGNcenxB8mD0VMk7C77gnUlv12bo+mK+1D1i8eUfKLFqxb0kOx
JGIRQNG5orF5vZxsyjRPVpvMS9gNG90vrPIypux4ryozCVMWbrjXRZNsPQKz8wb9
UGcJIFB6R6JVbmBGchi434PEJkcdZzP/a0HvVSO51oGsFBnwYwQ7XVc3PyA4KCD7
tTbm6T2Rpdak3Pcd/nuzoXCMBCkh48XGKxZ+yPuLXGG5ZGIZ6rzlHPqBsEqqiLz5
DLzbsxKyLHX2Af87js4J9OXkoNQI4rVGurvNbkQ7IMQ2/Xt97kgUEgr3W0Vj+r82
bqIqWm4OdJ9cDzTGVlQ7l2vLv6RMe7DrkeWRNEKZZgfir7Hgj1gr79BOe96ETKBd
7r/1z0fBkZoWSq2OdjX8RouXMwd1Nq3FnqYv2BQ99rvM/AqpkY0HYsPIfUilHq6T
ZXhvm/4LIEev0F/GiJvV5jHHg637QS4QqdyglF8ODC8vSMvOThhL9Gj7EMgJs7hj
Ywt1B5y88//Zq4+IGVda98J5ynOZO1CArvzoYR5UMnWiq2K0Lxpq7wemE/finyIK
0jWLqlmCmYRzsS+oQEg/
=et1C
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160923' into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e17 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:
1) We register a real type with the CPU alias name in
spapr_cpu_core_register_types() - this prevents us from registering
a CPU family name in kvm_ppc_register_host_cpu_type() with the same
name (as we do it for the non-hotpluggable CPU types).
2) It's quite cumbersome to maintain the aliases here in sync with the
ppc_cpu_aliases list from target-ppc/cpu-models.c.
So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Prior to c8721d3 "spapr: Error out when CPU hotplug is attempted on older
pseries machines", attempting to use query-hotpluggable-cpus on pseries-2.6
and earlier machine types would SEGV.
That change fixed that, but due to some unexpected interactions in init
order and a brown-paper-bag worthy failure to test, it accidentally
disabled query-hotpluggable-cpus for all pseries machine types, including
the current one which should allow it.
In fact, query_hotpluggable_cpus needs to be non-NULL when and only when
the dr_cpu_enabled flag in sPAPRMachineClass is set, which makes
dr_cpu_enabled itself redundant.
This patch removes dr_cpu_enabled, instead directly setting
query_hotpluggable_cpus from the machine class_init functions, and using
that to determine the availability of CPU hotplug when necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CPU hotplug and coldplug aren't supported prior to pseries-2.7. Further,
earlier machine types don't use CPU core objects at all. These mean that
query-hotpluggable-cpus and coldplug on older pseries machines will crash
QEMU. It also means that hotpluggable_cpus flag in query-machines will
be incorrectly set to true for pseries < 2.7, since it is based on the
presence of the query_hotpluggable_cpus hook.
- Don't assign the query_hotpluggable_cpus hook for pseries < 2.7
- query_hotpluggable_cpus should therefore never be called on pseries <
2.7, so add an assert
- spapr_core_pre_plug() should fail hot/cold plug attempts for pseries <
2.7, since core objects are never used there
- spapr_core_plug() should therefore never be called for pseries < 2.7, so
add an assert.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Change from query_hotpluggable_cpus returning NULL for pseries < 2.7
to not being called at all, reword commit message for accuracy]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal of this patch is to have a stable core-id which does not depend
on any DT related semantics, which involve non-obvious computations on
modern PowerPC server cpus.
With this patch, the DT core id is computed on-demand as:
(core-id / smp_threads) * smt
where smt is the number of threads per core in the host.
This formula should be consolidated in a helper since it is needed in
several places.
Other uses for core-id includes: compute a stable cpu_index (which
allows random order hotplug/unplug without breaking migration) and
NUMA.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When canceling a migration process, we currently do not close the
HTAB migration file descriptor since htab_save_complete() is never
called in that case. So we leave the migration process with a
dangling htab_fd value around, and this causes any further migration
attempts to fail. To fix this issue, simply make sure that the
htab_fd is closed during the migration cleanup stage. And since the
cleanup() function is also called when migration succeeds, we can
also remove the call to close_htab_fd() from the htab_save_complete()
function.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354341
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds proper support for translating real mode addresses based
on the combination of HV and LPCR bits. This handles HRMOR offset
for hypervisor real mode, and both RMA and VRMA modes for guest
real mode. PAPR mode adjusts the offsets appropriately to match the
RMA used in TCG, but we need to limit to the max supported by the
implementation (16G).
This includes some fixes by Cédric Le Goater <clg@kaod.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[dwg: Adjusted for differences in my version of the prereq patches]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This adds support for Dynamic DMA Windows (DDW) option defined by
the SPAPR specification which allows to have additional DMA window(s)
The "ddw" property is enabled by default on a PHB but for compatibility
the pseries-2.6 machine and older disable it.
This also creates a single DMA window for the older machines to
maintain backward migration.
This implements DDW for PHB with emulated and VFIO devices. The host
kernel support is required. The advertised IOMMU page sizes are 4K and
64K; 16M pages are supported but not advertised by default, in order to
enable them, the user has to specify "pgsz" property for PHB and
enable huge pages for RAM.
The existing linux guests try creating one additional huge DMA window
with 64K or 16MB pages and map the entire guest RAM to. If succeeded,
the guest switches to dma_direct_ops and never calls TCE hypercalls
(H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM
and not waste time on map/unmap later. This adds a "dma64_win_addr"
property which is a bus address for the 64bit window and by default
set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware
uses and this allows having emulated and VFIO devices on the same bus.
This adds 4 RTAS handlers:
* ibm,query-pe-dma-window
* ibm,create-pe-dma-window
* ibm,remove-pe-dma-window
* ibm,reset-pe-dma-window
These are registered from type_init() callback.
These RTAS handlers are implemented in a separate file to avoid polluting
spapr_iommu.c with PCI.
This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs
and updates all references to dma_liobn. However this does not add
64bit LIOBN to the migration stream as in fact even 32bit LIOBN is
rather pointless there (as it is a PHB property and the management
software can/should pass LIOBNs via CLI) but we keep it for the backward
migration support.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "ICP" is a different object than the "XICS". For historical reasons,
we have a number of places where we name a variable "icp" while it contains
a XICSState pointer. There *is* an ICPState structure too so this makes
the code really confusing.
This is a mechanical replacement of all those instances to use the name
"xics" instead. There should be no functional change.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[spapr_cpu_init has been moved to spapr_cpu_core.c, change there]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The common class doesn't change, the KVM one is sPAPR specific. Rename
variables and functions to xics_spapr.
Retain the type name as "xics" to preserve migration for existing sPAPR
guests.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add "hcall-sprg0" (for H_SET_SPRG0), "hcall-copy" (for H_PAGE_INIT)
and "hcall-debug" (for H_LOGICAL_CI_LOAD/STORE) to the property
"ibm,hypertas-functions" to indicate that we support these hypercalls.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
struct CPUCore uses 'id' suffix in the property name. As docs for
query-hotpluggable-cpus state that the cpu core properties should be
passed back to device_add by management in case new members are added
and thus the names for the fields should be kept in sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[dwg: Removed a duplicated word in comment]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It returns a list of present/possible to hotplug CPU
objects with a list of properties to use with
device_add.
in spapr case returned list would looks like:
-> { "execute": "query-hotpluggable-cpus" }
<- {"return": [
{ "props": { "core": 8 }, "type": "POWER8-spapr-cpu-core",
"vcpus-count": 2 },
{ "props": { "core": 0 }, "type": "POWER8-spapr-cpu-core",
"vcpus-count": 2,
"qom-path": "/machine/unattached/device[0]"}
]}'
TODO:
add 'node' property for core <-> numa node mapping
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the CPU core device by removing the underlying CPU thread devices.
Hot removal of CPU for sPAPR guests is achieved by sending the hot unplug
notification to the guest. Release the vCPU object after CPU hot unplug so
that vCPU fd can be parked and reused.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set up device tree entries for the hotplugged CPU core and use the
exising RTAS event logging infrastructure to send CPU hotplug notification
to the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce sPAPRMachineClass.dr_cpu_enabled to indicate support for
CPU core hotplug. Initialize boot time CPUs as core deivces and prevent
topologies that result in partially filled cores. Both of these are done
only if CPU core hotplug is supported.
Note: An unrelated change in the call to xics_system_init() is done
in this patch as it makes sense to use the local variable smt introduced
in this patch instead of kvmppc_smt_threads() call here.
TODO: We derive sPAPR core type by looking at -cpu <model>. However
we don't take care of "compat=" feature yet for boot time as well
as hotplug CPUs.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Start consolidating CPU init related routines in spapr_cpu_core.c. As
part of this, move spapr_cpu_init() and its dependencies from spapr.c
to spapr_cpu_core.c
No functionality change in this patch.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Rename TIMEBASE_FREQ to SPAPR_TIMEBASE_FREQ, since it's now in a
public(ish) header]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add sPAPR specific abastract CPU core device that is based on generic
CPU core device. Use this as base type to create sPAPR CPU specific core
devices.
TODO:
- Add core types for other remaining CPU types
- Handle CPU model alias correctly
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Memory hotplug can fail for some combinations of RAM and maxmem when
DDW is enabled in the presence of devices like nec-usb-xhci. DDW depends
on maximum addressable memory returned by guest and this value is currently
being calculated wrongly by the guest kernel routine memory_hotplug_max().
While there is an attempt to fix the guest kernel, this patch works
around the problem within QEMU itself.
memory_hotplug_max() routine in the guest kernel arrives at max
addressable memory by multiplying lmb-size with the lmb-count obtained
from ibm,dynamic-memory property. There are two assumptions here:
- All LMBs are part of ibm,dynamic memory: This is not true for PowerKVM
where only hot-pluggable LMBs are present in this property.
- The memory area comprising of RAM and hotplug region is contiguous: This
needn't be true always for PowerKVM as there can be gap between
boot time RAM and hotplug region.
To work around this guest kernel bug, ensure that ibm,dynamic-memory
has information about all the LMBs (RMA, boot-time LMBs, future
hotpluggable LMBs, and dummy LMBs to cover the gap between RAM and
hotpluggable region).
RMA is represented separately by memory@0 node. Hence mark RMA LMBs
and also the LMBs for the gap b/n RAM and hotpluggable region as
reserved and as having no valid DRC so that these LMBs are not considered
by the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM now supports 512 memslots on PowerPC (earlier it was 32). Allow half
of it (256) to be used as hotpluggable memory slots.
Instead of hard coding the max value, use the KVM supplied value if KVM
is enabled. Otherwise resort to the default value of 32.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are possible racing situations involving hotplug events and
guest migration. For cases where a hotplug event is migrated, or
the guest is in the process of fetching device tree at the time of
migration, we need to ensure the device tree is created and
associated with the corresponding DRC for devices that were
hotplugged on the source, but 'coldplugged' on the target.
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds check for negative return value from get_image_size(),
where it is missing. It avoids unnecessary two function calls.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>