The usual semihosting behaviour is to process the system calls locally and
return; unfortuantelly the initial implementation dinamically changed the
target to GDB during debug sessions, which, for the usual arm-none-eabi-gdb,
is not implemented. The result was that during debug sessions the semihosting
calls were discarded.
This patch adds a configuration variable and an option to set it on the
command line:
-semihosting-config [enable=on|off,]target=native|gdb|auto
This option enables semihosting and defines where the semihosting calls will
be addressed, to QEMU ('native') or to GDB ('gdb'). The default is auto, which
means 'gdb' during debug sessions and 'native' otherwise.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Message-id: 1416341957-9796-1-git-send-email-ilg@livius.net
[PMM: moved declaration and definition of semihosting_target to
gdbstub.h and gdbstub.c to fix build failure on linux-user]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to run unit tests under semihosting, it is necessary to pass the
application exit code back to the system.
ARM defines only the code to be used for non-error application exit
(ADP_Stopped_ApplicationExit), all other codes should return non-zero
exit codes.
This patch checks if the application code passed via TARGET_SYS_EXIT is
ADP_Stopped_ApplicationExit, and return 0, otherwise return 1.
Signed-off-by: Liviu Ionescu <ilg@livius.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=E4CC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bkoppelmann/tags/pull-tricore-20141210' into staging
TriCore BOL, BRC, BRN, BRR, RC, RCPW, RCRR, RCR, RLC and RCR insn added
# gpg: Signature made Wed 10 Dec 2014 11:21:58 GMT using RSA key ID 6B69CA14
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>"
* remotes/bkoppelmann/tags/pull-tricore-20141210:
target-tricore: Add instructions of RCR opcode format
target-tricore: Add instructions of RLC opcode format
target-tricore: Add instructions of RCPW, RCRR and RCRW opcode format
target-tricore: Make TRICORE_FEATURES implying others.
target-tricore: Add instructions of RC opcode format
target-tricore: Add instructions of BRR opcode format
target-tricore: Add instructions of BRN opcode format
target-tricore: Add instructions of BRC opcode format
target-tricore: Add instructions of BOL opcode format
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add instructions of RCR opcode format.
Add helper for madd32/64_ssov and madd32/64_suov.
Add helper for msub32/64_ssov and msub32/64_suov.
Add microcode generator function madd/msub for 32bit and 64bit, which calculate a mul and a add/sub.
OPC2_32_RCR_MSUB_U_32 -> OPC2_32_RCR_MSUB_U_32.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add instructions of RLC opcode format.
Add helper psw_write/read.
Add microcode generator gen_mtcr/mfcr, which loads/stores a value to a core special function register, which are defined in csfr.def
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Since all the TriCore instructionsets are subsets of each other (1.3 C 1.3.1 C 1.6),
make the features implying each other, e.g 1.6 also has 1.3.1 and 1.3. This way
we only need to check our features for the instructionset, where a instruction was first introduced.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add instructions of RC opcode format.
Add helper for mul, sha, absdif with signed saturation on overflow.
Add helper for add, sub, mul with unsigned saturation on overflow.
Add microcode generator functions:
* gen_add_CC, which calculates the carry bit.
* gen_addc_CC, which adds the carry bit to the add and calculates the carry bit.
* gen_absdif, which calculates the absolute difference.
* gen_mul_i64s/u, which mul two 32 bits val into one 64bit reg.
* gen_sh_hi, which shifts two 16bit words in one reg.
* gen_sha_hi, which does a arithmetic shift on two 16bit words.
* gen_sh_cond, which shifts left a reg by one and writes the result of cond into the lsb.
* gen_accumulating_cond, which ands/ors/xors the result of cond of the lsbs
with the lsb of the result.
* gen_eqany_bi/hi, which checks ever byte/hword on equality.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Add instructions of BOL opcode format.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-7-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It will be assigned to the return value of vmdk_read_desc.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-6-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since a too small file cannot be a valid VMDK image, and also since the
buffer's first 4 bytes will be unconditionally examined by
vmdk_open_sparse, let's error out the small file case to be clear.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zeroing a buffer that will be filled right after is not necessary, and
allocating a power of two + 1 is naughty.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit 04d542c8b (vmdk: support vmfs files) added support of VMFS extent
type but the comment above the changed code is left out. Update the
comment so they are consistent.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Message-id: 1417649314-13704-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This replaces two "time(NULL)" invocations with "g_random_int()".
According to VMDK spec, CID "is a random 32‐bit value updated the first
time the content of the virtual disk is modified after the virtual disk
is opened". Using "seconds since epoch" is just a "lame way" to generate
it, and not completely safe because of the low precision.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417649314-13704-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, 1) is safer than g_malloc(sizeof(T)), because it returns T *
rather than void *, which lets the compiler catch more type errors.
Missed in commit 02c4f26.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1417697709-13087-1-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit fef6070, the need for NOCOW was removed from the vpc driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vpc_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 8ba076fa725fed681cde7d8afc4fb239ae06a9c6.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit 7074786, the need for NOCOW was removed from the vdi driver,
as we removed the the posix calls. However, the BLOCK_OPT_NOCOW was not
removed from vdi_create_opts. This was a mistake - remove the opt from
there as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: e189364de11929d8fa04722f5d845de0a9834d44.1417620301.git.jcody@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VMDK extent parsing code doesn't handle the JSON file name, so the case
fails for these subformats. Disabled them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1417571370-19495-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The return value must be negative on error; there is one place in
raw_open_common() where errp is set, but ret remains 0. Fix it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() may fail and qcow2_write_compressed() should return the
error code in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In qcow2_alloc_cluster_offset(), *num is limited to
INT_MAX >> BDRV_SECTOR_BITS by all callers. However, since remaining is
of type uint64_t, we might as well cast *num to that type before
performing the shift.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image options which can be amended are described by the .create_opts
field for every driver. This field must therefore be non-NULL so that
anything can be amended in the first place. Check that this holds true
before going into qemu_opts_create() (because if .create_opts is NULL,
the create_opts pointer in img_amend() will be NULL after
qemu_opts_append()).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL for the target image in qemu-img convert, which is
important so that the create_opts pointer in img_convert() is not NULL
after the qemu_opts_append() calls and when going into
qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL in bdrv_img_create(), which is important so that
the create_opts pointer in that function is not NULL after the
qemu_opts_append() calls and when going into qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The nfs protocol driver is capable of creating images, but did not
specify any creation options. Fix it.
A way to test this issue is the following:
$ qemu-img create -f nfs nfs://127.0.0.1/foo.qcow2 64M
Without this patch, it segfaults. With this patch, it does not. However,
this is not something that should really work; qemu-img should check
whether the parameter for the -f option (and -O for convert) is indeed a
format, and error out if it is not. Therefore, I am not making it an
iotest.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Although virtually impossible right now, bdrv_find_format("qcow") may
fail. The vvfat block driver should heed that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are some block drivers which are essential to QEMU and may not be
removed: These are raw, file and qcow2 (as the default non-raw format).
Make their BlockDriver objects public so they can be directly referenced
throughout the block layer without needing to call bdrv_find_format()
and having to deal with an error at runtime, while the real problem
occurred during linking (where raw, file or qcow2 were not linked into
qemu).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two instances of iotest 059 using qemu-io on a qcow2 image. As
of "qemu-iotests: Use qemu-io -f $IMGFMT" the iotests can no longer rely
on $QEMU_IO doing probing, therefore the qcow2 format has to be
specified explicitly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our IDE emulation can't handle logical block sizes other than 512. Check
for it.
The original assumption was that other values would silently be ignored
(which is bad enough), but it's not quite true: The physical block size
is exposed in IDENTIFY DEVICE as a multiple of the logical block size.
Setting a logical block size therefore also corrupts the physical block
size (4096/4096 doesn't silently downgrade to 4096/512, but 512/512).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Initialise our maximum page size capability to 64kB and increase
the page_size variable from 16 to 32 bits.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 082.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Use the external qemu-timer API instead.
No one else should be calling cpu_get_clock(), get_clock() and
get_clock_realtime() directly; they are internal functions and they
should be confined to qemu-timer.c and cpus.c (where the icount
implementation resides). All accesses should go through
qemu_clock_get_ns.
Cc: kwolf@redhat.com
Cc: stefanha@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1417010463-3527-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 specification requires that the header extension data be
padded to round up the extension size to the next multiple of 8 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BLOCK_OP_TYPE_INTERNAL_SNAPSHOT op blocker exists but was never
used! Let's fix that so internal snapshots can be blocked.
[Fixed s/external/internal/ typo as pointed out by Paolo Bonzini and Max
Reitz.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The transaction QMP command performs operations atomically on a group of
drives. This command needs to acquire AioContext in order to work
safely when virtio-blk dataplane IOThreads are accessing drives.
The transactional nature of the command means that actions are split
into prepare, commit, abort, and clean functions. Acquire the
AioContext in prepare and don't release it until one of the other
functions is called. This prevents the IOThread from running the
AioContext before the transaction has completed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-4-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive_backup_prepare() assigns DriveBackupState fields to NULL in the
error path. This is unnecessary because the DriveBackupState is
allocated using g_malloc0() and other functions like
external_snapshot_prepare() already rely on this.
Do not explicitly assign fields to NULL so that the error path is
concise and does not require modification when fields are added to
DriveBackupState.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Originally the transaction QMP command was just for taking snapshots.
The command became more general when drive-backup and abort were added.
It is more accurate to say the command is about performing operations on
an atomic group than to say it is about snapshots.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416566940-4430-2-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>