Currently there are two problems.
The first is clang generates a preamble (that is always executed) to
stack xmm registers. This causes a ILLOP on the x86_64 softmmu tests
as SSE isn't enabled.
The second is the inline assembler in test-i386.c breaks clangs
compiler and I don't know how to fix it. Even with Theodore's patch
series (D5741445-7EFD-4AF1-8DB2-E4AFA93CBB1A@icloud.com) I still get
compiler failures.
For now lets just skip clang and allow it to fall back to the
containers which we know have compilers which work.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-31-alex.bennee@linaro.org>
This was picked up when clang built the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-30-alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tests for Byte-Reverse Halfword, Word and Doubleword
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
[AJB: tweak to make rules for skip/plugins]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-3-matheus.ferst@eldorado.org.br>
Message-Id: <20210512102051.12134-28-alex.bennee@linaro.org>
A newer compiler is needed to build tests for Power10 instructions. As
done for arm64 on c729a99d27, a new '-test-cross' image is created for
ppc64 and ppc64le. As done on 936fda4d77, a test for compiler support
is added to verify that the toolchain in use has '-mpower10'. Finally,
Unused images (docker-power-cross and docker-ppc64-cross) are removed.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210423205757.1752480-2-matheus.ferst@eldorado.org.br>
Message-Id: <20210512102051.12134-27-alex.bennee@linaro.org>
This kind of tests is inspired by the riscv-tests repository. This adds
macros that makes it easy to create single instruction self containing
tests.
It is achieved by macros that create a test sequence for an
instruction and check for a supplied correct value. If the value is correct the
next instruction is tested. Otherwise we jump to fail handler that writes is
test number as a status code back to qemu that then exits on that status code.
If all tests pass we write back 0 as a status code and exit.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20210305170045.869437-7-kbastian@mail.uni-paderborn.de>
[AJB: add container_hosts]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-17-alex.bennee@linaro.org>
this includes the Makefile and linker script to build all the tests.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-5-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-15-alex.bennee@linaro.org>
when trying to run successful short tests from the Makefile timeout would not
terminate. Rather it would wait until the time runs out. Excerpt from the
manpage:
--foreground
when not running timeout directly from a shell prompt,
allow COMMAND to read from the TTY and get TTY signals; in this mode, chil‐
dren of COMMAND will not be timed out
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210305170045.869437-3-kbastian@mail.uni-paderborn.de>
Message-Id: <20210512102051.12134-13-alex.bennee@linaro.org>
At least for the TriCore target no easily available c compiler exists.
Thus we need to rely on "as" and "ld". This allows us to run them
through the docker image. We don't test the generation capabilities of
docker images as they are assumed to work.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
[AJB: fix quoting, only handle docker & clear, test -n, tweak commit msg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-12-alex.bennee@linaro.org>
There should only be one compiler per architecture. Those cases where
the same compiler can deal with a different architecture should be
explicitly set for both cross_cc and docker configurations. Otherwise
you get strangeness like:
--cross-cc-aarch64=/bin/false
causing the logic to attempt to use a locally available
arm-linux-gnueabihf-gcc rather than forcing the use of the docker
image which is what is implied by the command line option.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210512102051.12134-10-alex.bennee@linaro.org>
Target lm32 was deprecated in commit d849800512, v5.2.0. See there
for rationale.
Some of its code lives on in device models derived from milkymist
ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210503084034.3804963-2-armbru@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
[Trivial conflicts resolved, reST markup fixed]
The following instruction is added
S2_cabacdecbin Rdd32=decbin(Rss32,Rtt32)
Test cases added to tests/tcg/hexagon/misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-27-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rdd32 = add(Rss32, Rtt32, Px4):carry
Add with carry
Rdd32 = sub(Rss32, Rtt32, Px4):carry
Sub with carry
Test cases in tests/tcg/hexagon/multi_result.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-22-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rdd32,Pe4 = vminub(Rtt32, Rss32)
Vector min of bytes
Test cases in tests/tcg/hexagon/multi_result.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-21-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rxx32,Pe4 = vacsh(Rss32, Rtt32)
Add compare and select elements of two vectors
Test cases in tests/tcg/hexagon/multi_result.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-20-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rd32,Pe4 = sfinvsqrta(Rs32)
Square root approx
The helper packs the 2 32-bit results into a 64-bit value,
and the fGEN_TCG override unpacks them into the proper results.
Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-19-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rd32,Pe4 = sfrecipa(Rs32, Rt32)
Recripocal approx
Test cases in tests/tcg/hexagon/multi_result.c
FP exception tests added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-18-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the proper return for helpers that convert to unsigned
Remove target/hexagon/conv_emu.[ch]
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-13-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Multiple writes to the same preg are and'ed together. Rather than
generating a runtime check, we can determine at TCG generation time
if the predicate has previously been written in the packet.
Test added to tests/tcg/hexagon/misc.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1617930474-31979-7-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using mprotect() to change PROT_* does not change the MAP_ANON
previously set with mmap(). Our linux-user version of MTE only
works with MAP_ANON pages, so losing PAGE_ANON caused MTE to
stop working.
Reported-by: Stephen Long <steplong@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Depending on the version of gdb we may not execute the first line of
SHA1Init when executing the first "next" command - instead just
stepping over the preamble. As we don't actually care about the
position of the PC after the steps and want to be sure the
context->state[] has been loaded before we inspect it do a double next
at the start.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-8-alex.bennee@linaro.org>
The containerised compiler defaults to no-pie anyway but if we are
relying on the users installed cross compiler we need to check it
works for building 16 bit code first.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210401102530.12030-7-alex.bennee@linaro.org>
Newer compilers might end up putting some data in .data.rel.local
which was getting skipped resulting in hilarious confusion on some
tests. Fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210401102530.12030-6-alex.bennee@linaro.org>
While it's hard to find cross compilers packaged for arches other than
x86_64 the same cannot be said for the x86_64 compiler which is
available on Debians i386, arm64 and ppc64el release architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-5-alex.bennee@linaro.org>
While docker is nominally multiarch these days it doesn't mean our
distros actually package all cross compilers for all architectures.
The upcoming Debian bullseye release will improve things further. At
least for now we can get things like the 32 bit ARM compiler on it's
64 bit cousin.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210401102530.12030-4-alex.bennee@linaro.org>
You don't usually notice this is broken on developer system on x86 as
we use the normal host compiler. However on other systems the -pc was
extraneous. Also for 32 bit only i686 packages exist now so we should
use those when available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210401102530.12030-2-alex.bennee@linaro.org>
Query the SYS_HEAPINFO semicall and do some basic verification of the
information via libc calls.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210323165308.15244-10-alex.bennee@linaro.org>
It may be arm-compat-semihosting but more than one architecture uses
it so lets move the tests into the multiarch area. We gate it on the
feature and split the semicall.h header between the arches.
Also clean-up a bit of the Makefile messing about to one common set of
runners.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-6-alex.bennee@linaro.org>
The commit d03b174a83 (target/ppc: simplify bcdadd/sub functions)
meant to simplify some of the code but it inadvertently altered the
way the CR6 field is set after the operation has overflowed.
The CR6 bits are set based on the *unbounded* result of the operation,
so we need to look at the result before returning from bcd_add_mag,
otherwise we will look at 0 when it overflows.
Consider the following subtraction:
v0 = 0x9999999999999999999999999999999c (maximum positive BCD value)
v1 = 0x0000000000000000000000000000001d (negative one BCD value)
bcdsub. v0,v0,v1,0
The Power ISA 2.07B says:
If the unbounded result is greater than zero, do the following.
If PS=0, the sign code of the result is set to 0b1100.
If PS=1, the sign code of the result is set to 0b1111.
If the operation overflows, CR field 6 is set to 0b0101. Otherwise,
CR field 6 is set to 0b0100.
POWER9 hardware:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0101 (0x5) (positive, overflow)
QEMU:
vr0 = 0x0000000000000000000000000000000c (positive zero BCD value)
cr6 = 0b0011 (0x3) (zero, overflow) <--- wrong
This patch reverts the part of d03b174a83 that introduced the
problem and adds a test-case to avoid further regressions:
before:
$ make run-tcg-tests-ppc64le-linux-user
(...)
TEST bcdsub on ppc64le
bcdsub: qemu/tests/tcg/ppc64le/bcdsub.c:58: test_bcdsub_gt:
Assertion `(cr >> 4) == ((1 << 2) | (1 << 0))' failed.
Fixes: d03b174a83 (target/ppc: simplify bcdadd/sub functions)
Reported-by: Paul Clarke <pc@us.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210222194035.2723056-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Blink and you miss the cross TCG compiler stuff so lets display it
with the rest of the compiler information.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210222101455.12640-2-alex.bennee@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-34-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1612763186-18161-33-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable multiarch tests for Hexagon
Modify tests/tcg/configure.sh
Add reference files to tests/tcg/hexagon
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1612763186-18161-32-git-send-email-tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A duplicate insn is one that is appears to be executed twice in a row.
This is currently possible due to -icount and cpu_io_recompile()
causing a re-translation of a block. On it's own this won't trigger
any tests though.
The heuristics that the plugin use can't deal with the x86 rep
instruction which (validly) will look like executing the same
instruction several times. To avoid problems later we tweak the rules
for x86 to run the "inline" version of the plugin. This also has the
advantage of increasing coverage of the plugin code (see bugfix in
previous commit).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-15-alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were fudging TBI1 enabled to speed up the generated code.
Now that we've improved the code generation, remove this.
Also, tidy the comment to reflect the current code.
The pauth test was testing a kernel address (-1) and making
incorrect assumptions about TBI1; stick to userland addresses.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>