When config-host.mak is not found it is safe to assume SRC_PATH is ".".
So, it is okay to move inclusion of ruls.mak out of the ifeq condition.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-4-git-send-email-famz@redhat.com
Using "," literal in $(call quiet-command, ...) arguments is awkward.
Add this constant to make it at least doable.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-3-git-send-email-famz@redhat.com
docker.py is added with a number of useful subcommands to manager docker
images and instances for QEMU docker testing. Subcommands are:
run: A wrapper of "docker run" (or "sudo -n docker run" if necessary),
which takes care of killing and removing the running container at
SIGINT.
clean: Tear down all the containers including inactive ones that are
started by docker_run.
build: Compare an image from given dockerfile and rebuild it if they're
different.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-2-git-send-email-famz@redhat.com
This function is from net/socket.c, move it to net.c and net.h.
Add SocketReadState to make others reuse net_fill_rstate().
suggestion from jason.
v4:
- move 'rs->finalize = finalize' to rs_init()
v3:
- remove SocketReadState init callback
- put finalize callback to net_fill_rstate()
v2:
- rename ReadState to SocketReadState
- add SocketReadState init and finalize callback
v1:
- init patch
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Here's another ppc patch queue. This batch is all preliminaries
towards two significant features:
1) Full hypervisor-mode support for POWER8
Patches 1-8 start fixing various bugs with TCG's handling of
hypervisor mode
2) CPU hotplug support
Patches 9-12 make some preliminary fixes towards implementing CPU
hotplug on ppc64 (and other non-x86 platforms). These patches are
actually to generic code, not ppc, but are included here with
Paolo's ACK.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vAIf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160531' into staging
ppc patch queue for 2016-05-31
Here's another ppc patch queue. This batch is all preliminaries
towards two significant features:
1) Full hypervisor-mode support for POWER8
Patches 1-8 start fixing various bugs with TCG's handling of
hypervisor mode
2) CPU hotplug support
Patches 9-12 make some preliminary fixes towards implementing CPU
hotplug on ppc64 (and other non-x86 platforms). These patches are
actually to generic code, not ppc, but are included here with
Paolo's ACK.
# gpg: Signature made Tue 31 May 2016 01:39:44 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160531:
cpu: Add a sync version of cpu_remove()
cpu: Reclaim vCPU objects
exec: Do vmstate unregistration from cpu_exec_exit()
exec: Remove cpu from cpus list during cpu_exec_exit()
ppc: Add PPC_64H instruction flag to POWER7 and POWER8
ppc: Get out of emulation on SMT "OR" ops
ppc: Fix sign extension issue in mtmsr(d) emulation
ppc: Change 'invalid' bit mask of tlbiel and tlbie
ppc: tlbie, tlbia and tlbisync are HV only
ppc: Do some batching of TCG tlb flushes
ppc: Use split I/D mmu modes to avoid flushes on interrupts
ppc: Remove MMU_MODEn_SUFFIX definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* NBD bugfix (Eric)
* Memory fixes and cleanups (Paolo, Paul)
* scsi-block support for SCSI status, including persistent
reservations (Paolo)
* kvm_stat moves to the Linux repository
* SCSI bug fixes (Peter, Prasad)
* Killing qemu_char_get_next_serial, non-ARM parts (Xiaoqiang)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXSpYYAAoJEL/70l94x66DZ5UIAJiFDjWdeFw5eS+MgjflcjN9
zibrg+z2QFqFP7Z3FlQR5EjiML0g1S1eceUPBCyZazx6bQS3zvHkbhIWVx2RtHeI
Rtt5SYRF+R1cvSEJrQGPr3ysCLAThBFuQRayJRQHi/emiUNzfTSW1z0YGaaErimP
o4vF6Sjt1RQcnBkOPw6Qcoe4gSIbh9W4vQFbaZdB2KoWM9fOYBrjFgEFm1lo01vS
Da77vlr1dcYCjohNgo9BOZIOllTQK7WG1XWRE6HPbqa8w6oePXikxJ1lc4PQxXyT
clZy5uGJicp7QmEHf+yG8Evtm2mZG2iOEF4NbbFIm/GghOdFzwtHavxU/ahpAig=
=DaAU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* docs/atomics fixes and atomic_rcu_* optimization (Emilio)
* NBD bugfix (Eric)
* Memory fixes and cleanups (Paolo, Paul)
* scsi-block support for SCSI status, including persistent
reservations (Paolo)
* kvm_stat moves to the Linux repository
* SCSI bug fixes (Peter, Prasad)
* Killing qemu_char_get_next_serial, non-ARM parts (Xiaoqiang)
# gpg: Signature made Sun 29 May 2016 08:11:20 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (30 commits)
exec: hide mr->ram_addr from qemu_get_ram_ptr users
memory: split memory_region_from_host from qemu_ram_addr_from_host
exec: remove ram_addr argument from qemu_ram_block_from_host
memory: remove qemu_get_ram_fd, qemu_set_ram_fd, qemu_ram_block_host_ptr
scsi-generic: Merge block max xfer len in INQUIRY response
scsi-block: always use SG_IO
scsi-disk: introduce scsi_disk_req_check_error
scsi-disk: add need_fua_emulation to SCSIDiskClass
scsi-disk: introduce dma_readv and dma_writev
scsi-disk: introduce a common base class
xen-hvm: ignore background I/O sections
docs/atomics: update comparison with Linux
atomics: do not emit consume barrier for atomic_rcu_read
atomics: emit an smp_read_barrier_depends() barrier only for Alpha and Thread Sanitizer
docs/atomics: update atomic_read/set comparison with Linux
bt: rewrite csrhci_write to avoid out-of-bounds writes
block/iscsi: avoid potential overflow of acb->task->cdb
scsi: megasas: check 'read_queue_head' index value
scsi: megasas: initialise local configuration data buffer
scsi: megasas: use appropriate property buffer size
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This sync API will be used by the CPU hotplug code to wait for the CPU to
completely get removed before flagging the failure to the device_add
command.
Sync version of this call is needed to correctly recover from CPU
realization failures when ->plug() handler fails.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In order to deal well with the kvm vcpus (which can not be removed without any
protection), we do not close KVM vcpu fd, just record and mark it as stopped
into a list, so that we can reuse it for the appending cpu hot-add request if
possible. It is also the approach that kvm guys suggested:
https://www.mail-archive.com/kvm@vger.kernel.org/msg102839.html
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[- Explicit CPU_REMOVE() from qemu_kvm/tcg_destroy_vcpu()
isn't needed as it is done from cpu_exec_exit()
- Use iothread mutex instead of global mutex during
destroy
- Don't cleanup vCPU object from vCPU thread context
but leave it to the callers (device_add/device_del)]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
cpu_exec_init() does vmstate_register for the CPU device. This needs to be
undone from cpu_exec_exit(). This change is needed to support CPU hot
removal.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[dwg: added missing include to fix compile on some archs]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
CPUState *cpu gets added to the cpus list during cpu_exec_init(). It
should be removed from cpu_exec_exit().
cpu_exec_exit() is called from generic CPU::instance_finalize and some
archs like PowerPC call it from CPU unrealizefn. So ensure that we
dequeue the cpu only once.
Now -1 value for cpu->cpu_index indicates that we have already dequeued
the cpu for CONFIG_USER_ONLY case also.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This will enable decoding of hrfid
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Otherwise tight loops at smt_low for example, which OPAL does,
eat so much CPU that we can't boot a kernel anymore. With that,
I can boot 8 CPUs just fine with powernv.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Otherwise it will trip on the forms used in recent architecture.
Ideally, we should have different handlers for different architecture
levels but our current implementation of TLB flushing is dumb enough
that this will do for now.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Not that anything remotely recent supports tlbia but ...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On ppc64 especially, we flush the tlb on any slbie or tlbie instruction.
However, those instructions often come in bursts of 3 or more (context
switch will favor a series of slbie's for example to an slbia if the
SLB has less than a certain number of entries in it, and tlbie's can
happen in a series, with PAPR, H_BULK_REMOVE can remove up to 4 entries
at a time.
Doing a tlb_flush() each time is a waste of time. We end up doing a memset
of the whole TLB, reloading it for the next instruction, memset'ing again,
etc...
Those instructions don't have to take effect immediately. For slbie, they
can wait for the next context synchronizing event. For tlbie, the next
tlbsync.
This implements batching by keeping a flag that indicates that we have a
TLB in need of flushing. We check it on interrupts, rfi's, isync's and
tlbsync and flush the TLB if needed.
This reduces the number of tlb_flush() on a boot to a ubuntu installer
first dialog screen from roughly 360K down to 36K.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[clg: added a 'CPUPPCState *' variable in h_remove() and
h_bulk_remove() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: removed spurious whitespace change, use 0/1 not true/false
consistently, since tlb_need_flush has int type]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We rework the way the MMU indices are calculated, providing separate
indices for I and D side based on MSR:IR and MSR:DR respectively,
and thus no longer need to flush the TLB on context changes. This also
adds correct support for HV as a separate address space.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't use the resulting accessors and this gets in the way of
the split I/D TLB work.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Let users of qemu_get_ram_ptr and qemu_ram_ptr_length pass in an
address that is relative to the MemoryRegion. This basically means
what address_space_translate returns.
Because the semantics of the second parameter change, rename the
function to qemu_map_ram_ptr.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the old qemu_ram_addr_from_host to memory_region_from_host and
make it return an offset within the region. For qemu_ram_addr_from_host
return the ram_addr_t directly, similar to what it was before
commit 1b5ec23 ("memory: return MemoryRegion from qemu_ram_addr_from_host",
2013-07-04).
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Of the two callers, one does not use it, and the other can compute
it itself based on the other output argument (offset) and the RAMBlock.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove direct uses of ram_addr_t and optimize memory_region_{get,set}_fd
now that a MemoryRegion knows its RAMBlock directly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rationale is similar to the above mode sense response interception:
this is practically the only channel to communicate restraints from
elsewhere such as host and block driver.
The scsi bus we attach onto can have a larger max xfer len than what is
accepted by the host file system (guarding between the host scsi LUN and
QEMU), in which case the SG_IO we generate would get -EINVAL.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464243305-10661-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using pread/pwrite or io_submit has the advantage of eliminating the
bounce buffer, but drops the SCSI status. This keeps the guest from
seeing unit attention codes, as well as statuses such as RESERVATION
CONFLICT. Because we know scsi-block operates on an SBC device we can
still use the DMA helpers with SG_IO; just remember to patch the CDBs
if the transfer is split into multiple segments.
This means that scsi-block will always use the thread-pool unfortunately,
instead of respecting aio=native.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commonize all the checks for canceled requests and errors. The next patch
will add another case to check for, in order to handle passthrough commands.
There is no semantic change here; the only nontrivial modification is in
scsi_write_do_fua, where cancellation has been checked earlier by both
callers. Thus, the check is replaced with an assertion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi-block will be able to do FUA just by passing the request through
to the LUN (which is also more efficient); there is no need to emulate
it like we do for scsi-disk.
Add a new method to distinguish this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These are replacements for blk_aio_readv and blk_aio_writev that allow
customization of the data path. They reuse the DMA helpers' DMAIOFunc
callback type, so that the same function can be used in either the
QEMUSGList or the bounce-buffered case.
This customization will be needed in the next patch to do zero-copy
SG_IO on scsi-block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be the place to add DMAIOFuncs in the next patch. There
are also a couple DeviceClass members that can be moved to the
abstract class's initialization function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since Xen will correctly handle accesses to unimplemented I/O ports (by
returning all 1's for reads and ignoring writes) there is no need for
QEMU to register backgroud I/O sections.
This patch therefore adds checks to xen_io_add/del so that sections with
memory-region ops pointing at 'unassigned_io_ops' are ignored.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1462811480-16295-1-git-send-email-paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Over time, some differences between QEMU and Linux atomics are getting
smoothed. In particular, Linux grew atomic_fetch_or (and in general
the differences regarding RMW operations were not described accurately)
and smp_load_acquire/smp_store_release. Also, set_mb was renamed to
smp_store_mb(). Include these changes in the documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently we emit a consume-load in atomic_rcu_read. Because of
limitations in current compilers, this is overkill for non-Alpha hosts
and it is only useful to make Thread Sanitizer work.
This patch leaves the consume-load in atomic_rcu_read when
compiling with Thread Sanitizer enabled, and resorts to a
relaxed load + smp_read_barrier_depends otherwise.
On an RMO host architecture, such as aarch64, the performance
improvement of this change is easily measurable. For instance,
qht-bench performs an atomic_rcu_read on every lookup. Performance
before and after applying this patch:
$ tests/qht-bench -d 5 -n 1
Before: 9.78 MT/s
After: 10.96 MT/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-4-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For correctness, smp_read_barrier_depends() is only required to
emit a barrier on Alpha hosts. However, we are currently emitting
a consume fence unconditionally, and most compilers currently treat
consume and acquire fences as equivalent.
Fix it by keeping the consume fence if we're compiling with Thread
Sanitizer, since this might help prevent false warnings. Otherwise,
only emit the barrier for Alpha hosts. Note that we still guarantee
that smp_read_barrier_depends() is a compiler barrier.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-3-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recently Linux did a mass conversion of its atomic_read/set calls
so that they at least are READ/WRITE_ONCE. See Linux's commit
62e8a325 ("atomic, arch: Audit atomic_{read,set}()"). It seems though
that their documentation hasn't been updated to reflect this.
The appended updates our documentation to reflect the change, which
means there is effectively no difference between our atomic_read/set
and the current Linux implementation.
While at it, fix the statement that a barrier is implied by
atomic_read/set, which is incorrect. Volatile/atomic semantics prevent
transformations pertaining the variable they apply to; this, however,
has no effect on surrounding statements like barriers do. For more
details on this, see:
https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1464120374-8950-2-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The usage of INT_MAX in this function confuses Coverity. I think
the defect is bogus, however there is no protection against
getting more than sizeof(s->inpkt) bytes from the character device
backend.
Rewrite the function to only fill in as much data as needed from
buf into s->inpkt. The plen variable is replaced by a simple
state machine and there is no need anymore to shift contents to
the beginning of s->inpkt.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
at least in the path via virtio-blk the maximum size is not
restricted.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1464080368-29584-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While doing MegaRAID SAS controller command frame lookup, routine
'megasas_lookup_frame' uses 'read_queue_head' value as an index
into 'frames[MEGASAS_MAX_FRAMES=2048]' array. Limit its value
within array bounds to avoid any OOB access.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464179110-18593-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When reading MegaRAID SAS controller configuration via MegaRAID
Firmware Interface(MFI) commands, routine megasas_dcmd_cfg_read
uses an uninitialised local data buffer. Initialise this buffer
to avoid stack information leakage.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464178304-12831-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When setting MegaRAID SAS controller properties via MegaRAID
Firmware Interface(MFI) commands, a user supplied size parameter
is used to set property value. Use appropriate size value to avoid
OOB access issues.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1464172291-2856-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The LSI SAS1068 Host Bus Adapter emulator in Qemu, periodically
looks for requests and fetches them. A loop doing that in
mptsas_fetch_requests() could run infinitely if 's->state' was
not operational. Move check to avoid such a loop.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464077264-25473-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vmware Paravirtual SCSI emulation uses command descriptors to
process SCSI commands. These descriptors come with their ring
buffers. A guest could set the ring buffer size to an arbitrary
value leading to OOB access issue. Add check to avoid it.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Cc: qemu-stable@nongnu.org
Message-Id: <1464000485-27041-1-git-send-email-ppandit@redhat.com>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to commit df7b97ff, we are mishandling clients that
give an unaligned NBD_CMD_TRIM request, and potentially
trimming bytes that occur before their request; which in turn
can cause potential unintended data loss (unlikely in
practice, since most clients are sane and issue aligned trim
requests). However, while we fixed read and write by switching
to the byte interfaces of blk_, we don't yet have a byte
interface for discard. On the other hand, trim is advisory, so
rounding the user's request to simply ignore the first and last
unaligned sectors (or the entire request, if it is sub-sector
in length) is just fine.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1464173965-9694-1-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
drop the qemu_char_get_next_serial and use chardev prop instead
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-6-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add lm32_uart_create function to create lm32 uart device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-5-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-4-git-send-email-zxq_yx_007@163.com>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
* Use qdev chardev prop instead of qemu_char_get_next_serial
* Add etraxfs_ser_create function to create etraxfs serial device
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-3-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Drop the old SysBus init function and use instance_init
* Call qemu_chr_add_handlers in the realize callback
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-Id: <1464158344-12266-2-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 5b5660adf1,
as it breaks the UEFI guest firmware (known as ArmVirtPkg or AAVMF)
running in the "virt" machine type of "qemu-system-aarch64":
Contrary to the commit message, (a->mr == b->mr) does *not* imply
that (a->romd_mode == b->romd_mode): the pflash device model calls
memory_region_rom_device_set_romd() -- for switching between the above
modes --, and that function changes mr->romd_mode but the current
AddressSpaceDispatch's FlatRange keeps the old value. Therefore
region_del/region_add are not called on the KVM MemoryListener.
Reported-by: Drew Jones <drjones@redhat.com>
Tested-by: Drew Jones <drjones@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAV0g0rrRIkN7ePJvAAQh+hA//TZOrmRskN7/PzlGp90pkNVL4Xm6LDNsj
fvgzB4ceuA+eRv426ttSpYgZestZjxmb/29c5UJWvH0Otnhrxj0aNKimxAO4FCIV
u2u73Mn4cTGZPfoMJesCYihC19LIFIpYFPjXTKz2UJ4Dg/ZLBd6KORDTC7kfXoSx
9wTgaHZkbrUBCwWQ+0SKrbibPJWY4RHUkYCK4dxCCPFRVpGhYFt1vihjZpzDzzNH
njjxr/GB8W1OByBI90TWUpx6e0YRqhKluuvr1ObezrK2/nCZhLwOkvgIB1yuew3e
AwFz5wUFtx80FV3ThAKDoJadz6tVKPG67OG2w5DmgUrK6gpOTP9n1LcypTK+wti4
/LNb9AhyEqsDD/apFQWNEEdYwCG6qjlaE01zp6ZQPgNUWpN1BSEDmikoHwpUqLaq
fXfgJZyOItp6LP3Tajkto2h9iAdXI6eoJHQtMK562J89WZz1Bb4IJxONAkWZq5oV
aQCOj0wD/vObUhMU72jLy2cd3kHM/RT5NliMhb+nbR9JY/WXbTeOn41hOhEnkJJJ
bjRPCN2O3ULfi3yn3St2ByCngPUG954uqmR2OaOGwEHGx6E/UEkWsduUlRwwY1zK
96pZvsHO8DSIDc5gNmUlvQlBc62v8b+KUcwsbloBCl2YGt9mbZNM9zi0Gg4R97MJ
jHkpVjF4L4I=
=/Nln
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160527' into staging
linux-user pull request v2 for may 2016
# gpg: Signature made Fri 27 May 2016 12:51:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160527: (38 commits)
linux-user,target-ppc: fix use of MSR_LE
linux-user/signal.c: Use s390 target space address instead of host space
linux-user/signal.c: Use target address instead of host address for microblaze restorer
linux-user/signal.c: Generate opcode data for restorer in setup_rt_frame
linux-user: arm: Remove ARM_cpsr and similar #defines
linux-user: Use direct syscalls for setuid(), etc
linux-user: x86_64: Don't use 16-bit UIDs
linux-user: Use g_try_malloc() in do_msgrcv()
linux-user: Handle msgrcv error case correctly
linux-user: Handle negative values in timespec conversion
linux-user: Use safe_syscall for futex syscall
linux-user: Use safe_syscall for pselect, select syscalls
linux-user: Use safe_syscall for execve syscall
linux-user: Use safe_syscall for wait system calls
linux-user: Use safe_syscall for open and openat system calls
linux-user: Use safe_syscall for read and write system calls
linux-user: Provide safe_syscall for fixing races between signals and syscalls
linux-user: Add debug code to exercise restarting system calls
linux-user: Support for restarting system calls for Microblaze targets
linux-user: Set r14 on exit from microblaze syscall
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>