Add support for migrating two dimensional arrays, by defining
a set of new macros VMSTATE_*_2DARRAY paralleling the existing
VMSTATE_*_ARRAY macros. 2D arrays are handled the same for actual
state serialization; the only difference is that the type check
has to change for a 2D array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1363975375-3166-2-git-send-email-peter.maydell@linaro.org
VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1362923278-4080-4-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Michael Walle <michael@walle.cc>
Message-id: 1362923278-4080-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Macro could be used to migrate a dynamically allocated buffer of known size.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1362923278-4080-2-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a missing VMSTATE_TIMER() entry to the arm_mptimer vmstate
description; this omission meant that we would probably hang on reload
when the timer failed to fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363967348-3044-1-git-send-email-peter.maydell@linaro.org
The is_mouse field of the pl050 state structure is constant (it tracks
whether this is a 'pl050_keyboard' or 'pl050_mouse'), so there's
no need to include it in the VMState structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363628480-29306-1-git-send-email-peter.maydell@linaro.org
Remove various bits of printing to stdout or stderr from the
nseries code, replacing it with a qemu log message where there's
an appropriate log category, and just dropping the output for
some of the more debug-like printing.
In particular, this will get rid of the 'mipid_reset' message
you currently get from 'make check'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363368565-24546-1-git-send-email-peter.maydell@linaro.org
# By Luiz Capitulino
# Via Luiz Capitulino
* luiz/queue/qmp:
chardev: drop the Memory chardev driver
hmp: human-monitor-command: stop using the Memory chardev driver
Monitor: Make output buffer dynamic
qstring: add qstring_get_length()
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fallthough into abort = oops.
Cc: qemu-trivial@nongnu.org
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's not used anymore since the last commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The Memory chardev driver was added because, as the Monitor's output
buffer was static, we needed a way to accumulate the output of an
HMP commmand when ran by human-monitor-command.
However, the Monitor's output buffer is now dynamic, so it's possible
for the human-monitor-command to use it instead of the Memory chardev
driver.
This commit does that change, but there are two important
observations about it:
1. We need a way to signal to the Monitor that it shouldn't call
chardev functions when flushing its output. This is done
by adding a new flag to the Monitor object called skip_flush
(which is set to true by qmp_human_monitor_command())
2. The current code has buffered semantics: QMP clients will
only see a command's output if it flushes its output with
a new-line character. This commit changes this to unbuffered,
which means that QMP clients will see a command's output
whenever the command prints anything.
I don't think this will matter in practice though, as I believe
all HMP commands print the new-line character anyway.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Commit f628926bb4 changed monitor_flush()
to retry on qemu_chr_fe_write() errors. However, the Monitor's output
buffer can keep growing while the retry is not issued and this can
cause the buffer to overflow.
To reproduce this issue, just start qemu and type on the Monitor:
(qemu) ?
This will cause an assertion to trig.
To fix this problem this commit makes the Monitor buffer dynamic,
which means that it can grow as much as needed.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Pass the 'last' parameter of print_signal() through to
print_raw_param(); this fixes a problem where we weren't printing
the comma separator for strace of rt_sigaction() when the signal
was an unnamed (ie realtime) one:
6856 rt_sigaction(230xf6fff870,0xf6fff8fc) = 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes some of the memory leaks in test-visitor-serialization but not all of them.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a fix for OpenBSD which was
listed in one function as part of the previous hard coded list of OS's
for the functions to support but not in the other.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20130405003748.GH884@rox.home.comstyle.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A common dependency of the constant's current users:
- hw/apic_common.c
- hw/i386/kvmvapic.c
- target-i386/cpu.c
is "target-i386/cpu.h".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-9-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new function acpi_table_install() installs any blob the caller passes
in. In the next patches this function will be promoted from helper role to
extern.
Reimplementing the logic should make it easier to understand. It also
removes a buffer overflow when
has_header &&
cumulative_file_size < ACPI_TABLE_HDR_SIZE - ACPI_TABLE_PFX_SIZE
(In that case the g_realloc() call in the read() loop used to shrink the
"acpi_tables" array, causing an out-of-bounds read access when copying the
header out of "acpi_tables".)
The new code isn't more daring alignment-wise than its predecessor:
"acpi_table_header" is packed, and the uint32_t fields are at offsets 6,
26, and 34.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-7-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As one consequence, strtok() -- which modifies its argument -- is replaced
with g_strsplit().
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-6-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The upcoming changes will need a cleanup section at the end of the
function, plus OptsVisitor reports errors via Error. For now keep
channeling any Errors to stderr.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-4-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The data is binary, not textual.
Also, acpi_table_add() abuses the "char *f" pointer -- which normally
points to file names to load -- to poke into the table. Introduce "char
unsigned *table_start" for that purpose.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-3-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Message-id: 1364412581-3672-4-git-send-email-hdegoede@redhat.com
Cc: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add qemu_chr_fe_claim / _release helper functions for properly dealing with
avail_connections.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-2-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the conditions blocking receiving are cleared, check for buffered rx
packets.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Otherwise make will refuse to build updated .po files.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
While investigating why a 32 bit Windows 2003 guest wasn't able to
successfully perform a shutdown /h, it was discovered that commit
afafe4bbe0 inadvertently dropped the
initialization of the s4_val used to handle s4 shutdown.
Initialize the value as before.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 1364928100-487-1-git-send-email-brogers@suse.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 5ec01c2e96 broke "-cpu ..,enforce",
as it has moved kvm_check_features_against_host() after the
filter_features_for_kvm() call. filter_features_for_kvm() removes all
features not supported by the host, so this effectively made
kvm_check_features_against_host() impossible to fail.
This patch changes the call so we check for host feature support before
filtering the feature bits.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1364935692-24004-1-git-send-email-ehabkost@redhat.com
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Hanweidong (1) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-04-03:
xen-mapcache: pass the right size argument to test_bits
xen-mapcache: replace last_address_index with a last_entry pointer
Compute the correct size for test_bits().
qemu_get_ram_ptr() and qemu_safe_ram_ptr() will call xen_map_cache()
with size is 0 if the requested address is in the RAM. Then
xen_map_cache() will pass the size 0 to test_bits() for checking if the
corresponding pfn was mapped in cache. But test_bits() will always
return 1 when size is 0 without any bit testing. Actually, for this
case, test_bits should check one bit. So this patch introduced a
__test_bit_size which is greater than 0 and a multiple of XC_PAGE_SIZE,
then test_bits can work correctly with __test_bit_size
>> XC_PAGE_SHIFT as its size.
Signed-off-by: Zhenguo Wang <wangzhenguo@huawei.com>
Signed-off-by: Weidong Han <hanweidong@huawei.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Replace last_address_index and last_address_vaddr with a single pointer
to the last MapCacheEntry used.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
These variables have not been set for a long time. Do not
include them in config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364918276-11866-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When we receive a file descriptor over a UNIX domain socket the
O_NONBLOCK flag is preserved. Clear the O_NONBLOCK flag and rely on
QEMU file descriptor users like migration, SPICE, VNC, block layer, and
others to set non-blocking only when necessary.
This change ensures we don't accidentally expose O_NONBLOCK in the QMP
API. QMP clients should not need to get the non-blocking state
"correct".
A recent real-world example was when libvirt passed a non-blocking TCP
socket for migration where we expected a blocking socket. The source
QEMU produced a corrupted migration stream since its code did not cope
with non-blocking sockets.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for file descriptor passing,
otherwise we could unexpectedly be using a blocking file descriptor.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UDP multicast, TCP, or UDP.
Some of these support both listen and connect.
Not all code paths set the socket to non-blocking. This patch addresses
the file descriptor passing and UDP cases which were missing
socket_set_nonblock(fd) calls.
I considered moving socket_set_nonblock(fd) to a central location but it
turns out the code paths are different enough to require non-blocking at
different places.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Gcc report "hw/vmxnet3.c:972: error: ‘rx_ridx’ may be used
uninitialized in this function", so fix it.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Message-id: 1364264646-27542-1-git-send-email-xiawenc@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QOM-ified the TPM support with much code borrowed from the rng implementation.
All other TPM related code moves will be provided in a subsequent patch.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 1364469981.24703.1.camel@d941e-10
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
