Currently cpu.h contains a number of definitions relating to the 64-bit
hash MMU. Some are used in the MMU emulation code, but some are only used
in the spapr MMU management hcall implementations.
This patch moves these definitions (except for a few that are needed
more widely) into mmu-hash64.h header, shared between the MMU emulation
code and the spapr hcall code. The MMU emulation code is also updated to
actually use a number of those definitions in place of hard coded
constants.
Similarly, we add new analogous definitions to mmu-hash32.h and use those
in place of many hard-coded constants in mmu-hash32.c
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix 32-bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
mmu_ctx_t is currently defined in cpu.h. However it is used for temporary
information relating to mmu translation, and is only used in mmu_helper.c
and (now) mmu-hash{32,64}.c. Furthermore it contains information which
should be specific to particular MMU types. Therefore, move its definition
to mmu_helper.c. mmu-hash{32,64}.c are converted to use new data types
private to the relevant MMUs (identical to mmu_ctx_t for now, but that will
change in future patches).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The functions for looking up BATs (Block Address Translation - essentially
a level 0 TLB) are shared between the classic 32-bit hash MMUs and the
6xx style software loaded TLB implementations.
This patch splits out a copy for the 32-bit hash MMUs, to facilitate
cleaning it up. The remaining version is left, but cleaned up slightly
to no longer deal with PowerPC 601 peculiarities (601 has a hash MMU).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The get_pteg_offset() helper function is currently shared between 32-bit
and 64-bit hash mmus, taking a parameter for the hash pte size. In the
64-bit paths, it's only called in one place, and it's a trivial
calculation. This patch, therefore, open codes it for 64-bit. The
remaining version, which is used in two places is made 32-bit only and
moved to mmu-hash32.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The newly separated paths for hash mmus rely on several helper functions
which are still shared with 32-bit hash mmus: pp_check(), check_prot() and
pte_update_flags(). While these don't have ugly ifdefs on the mmu type,
they're not very well thought out, so sharing them impedes cleaning up the
hash mmu paths. For now, put near-duplicate versions into mmu-hash64.c and
mmu-hash32.c, leaving the old version in mmu_helper.c for 6xx software
loaded tlb implementations. The hash 32 and software loaded
implementations are simplfied slightly, using the fact that no 32-bit CPUs
implement the 3rd page protection bit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
cpu_get_phys_page_debug() is a trivial wrapper around
get_physical_address(). But even the signature of
get_physical_address() has some things we'd like to clean up on a
per-mmu basis, so this patch moves the test on mmu model out to
cpu_get_phys_page_debug(), moving the version for 64-bit hash MMUs out
to mmu-hash64.c and the version for 32-bit hash MMUs to mmu-hash32.c
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
cpu_ppc_handle_mmu_fault() calls get_physical_address() (whose behaviour
depends on MMU type) then, if that fails, issues an appropriate exception
- which again has a number of dependencies on MMU type.
This patch starts converting cpu_ppc_handle_mmu_fault() to have a
single switch on MMU type, calling MMU specific fault handler
functions which deal with both translation and exception delivery
appropriately for the MMU type. We convert 32-bit and 64-bit hash
MMUs to this new model, but the existing code is left in place for
other MMU types for now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Depending on the MSR state, for 64-bit hash MMUs, get_physical_address
can either call check_physical (which has further tests for mmu type)
or get_segment64. Similarly for 32-bit hash MMUs we can either call
check_physucal or get_bat() and get_segment32().
This patch splits off the whole get_physical_addresss() path for hash
MMUs into 32-bit and 64-bit versions, handling real mode correctly for
such MMUs without going to check_physical and rechecking the mmu type.
Correspondingly, the hash MMU specific paths in check_physical() are
removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently get_physical_address() first checks to see if translation is
enabled in the MSR, then in the translation on case switches on the mmu
type. Except that for BookE MMUs, translation is always on, and so it
has to switch in the "translation off" case as well and do the same thing
as the translation on path for those MMUs. Plus, even translation off
doesn't behave exactly the same on the various MMU types so there are
further mmu type checks in the "translation off" path.
As a first step to cleaning this up, this patch moves the switch on mmu
type to the top level, then makes the translation on/off check just for
those mmu types where it is meaningful.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The poorly named get_segment() function handles most of the address
translation logic for hash-based MMUs. It has many ugly conditionals on
whether the MMU is 32-bit or 64-bit.
This patch splits the function into 32 and 64-bit versions, using the
switch on mmu_type that's already in the caller
(get_physical_address()) to select the right one. Most of the
original function remains in mmu_helper.c to support the 6xx software
loaded TLB implementations (cleaning those up is a project for another
day).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
32-bit and 64-bit hash MMU implementations currently share a find_pte
function. This results in a whole bunch of ugly conditionals in the shared
function, and not all that much actually shared code.
This patch separates out the 32-bit and 64-bit versions, putting then
in mmu-hash64.c and mmu-has32.c, and removes the conditionals from
both versions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently support for both 32-bit and 64-bit hash MMUs share an
implementation of pte_check. But there are enough differences that this
means the shared function has several very ugly conditionals on "is_64b".
This patch cleans things up by separating out the 64-bit version
(putting it into mmu-hash64.c) and the 32-bit hash version (putting it
in mmu-hash32.c). Another copy remains in mmu_helper.c, which is used
for the 6xx software loaded TLB paths.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
As a first step to disentangling the handling for 64-bit hash MMUs from
the rest, we move the code handling the Segment Lookaside Buffer (SLB)
(which only exists on 64-bit hash MMUs) into a new mmu-hash64.c file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
One LOG_MMU statement in mmu_helper.c has an odd check on the effective
address being translated. I can see no reason for this; I suspect it was
a debugging hack from long ago. This patch removes it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes the never-used pte64_invalidate() function, and makes
ppcmas_tlb_check() static, since it's only used within that file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PowerPC 620 was the very first 64-bit PowerPC implementation, but
hardly anyone ever actually used the chips. qemu notionally supports the
620, but since we don't actually have code to implement the segment table,
the support is broken (quite likely in other ways too).
This patch, therefore, removes all remaining pieces of 620 support, to
stop it cluttering up the platforms we actually care about. This includes
removing support for the ASR register, used only on segment table based
machines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Although the support of this register may be uncomplete, there are no
reason to prevent the debugger from reading or writing it.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
target-ppc/kvm.c has an #ifdef on CONFIG_PSERIES, for the handling of
KVM exits due to a PAPR hypercall from the guest. However, since commit
e4c8b28cde "ppc: express FDT dependency of
pSeries and e500 boards via default-configs/", this hasn't worked properly.
That patch altered the configuration setup so that although CONFIG_PSERIES
is visible from the Makefiles, it is not visible from C files. This broke
the pseries machine when KVM is in use.
This patch makes a quick and dirty fix, by removing the CONFIG_PSERIES
dependency, replacing it with TARGET_PPC64 (since removing it entirely
leads to type mismatch errors). Technically this breaks the build when
configured with --disable-fdt, since that disables CONFIG_PSERIES on
TARGET_PPC64. However, it turns out the build was already broken in that
case, so this fixes pseries kvm without breaking anything extra. I'm
looking into how to fix that build breakage, but I don't think that need
delay applying this patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move array of CPU aliases to cpu-models.c, alongside model definitions.
This requires to zero-terminate the aliases array since ARRAY_SIZE() can
no longer be used in translate_init.c then.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The QMP query-cpu-definitions implementation iterated over CPU classes
only, which were getting less and less as aliases were extracted.
Keep them in QMP as valid -cpu arguments even if not guaranteed stable.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Revert adding a separate -cpu ? output section for aliases and list them
per CPU subclass.
Requested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This avoids assigning individual class fields and contributors
forgetting to add field assignments in KVM-only code.
ppc_cpu_class_find_by_pvr() requires the CPU model classes to be
registered, so defer host CPU type registration to kvm_arch_init().
Only register the host CPU type if there is a class with matching PVR.
This lets us drop error handling from instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
A victim of the d523dd00a7 AREG0
conversion, insert the missing cpu_env arguments.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently qemu does not get and put the state of the floating point and
vector registers to KVM. This is obviously a problem for savevm, as well
as possibly being problematic for debugging of FP-using guests.
This patch fixes this by using new extensions to the ONE_REG interface to
synchronize the qemu floating point state with KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently when runing under KVM on ppc, we synchronize a certain number of
vital SPRs to KVM through the SET_SREGS call. This leaves out quite a lot
of important SPRs which are maintained in KVM. It would be helpful to
have their contents in qemu for debugging purposes, and when we implement
migration it will be vital, since they include important guest state that
will need to be restored on the target.
This patch sets up for synchronization of any registers supported by the
KVM ONE_REG calls. A new variant on spr_register() allows a ONE_REG id to
be stored with the SPR information. When we set/get information to KVM
we also synchronize any SPRs so registered.
For now we set this mechanism up to synchronize a handful of important
registers that already have ONE_REG IDs, notably the DAR and DSISR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Let it resolve to v2.3 rather than v2.0.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that model definitions only reference their parent type, model
definitions are independent of the family definitions and can be
compiled independently of TCG translation.
Keep all #if defined(TODO) code local to cpu-models.c.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This gets rid of some more overly long comments that have lost most of
their purpose now that in most cases there's only two functions left per
CPU family.
The class field is inherited by the actual CPU models, so override it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now POWERPC_DEF_SVR() no longer sets family-specific fields itself.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Don't attempt to suppress registration of CPU types, since the criteria
is actually a property of the class and should thus become a field.
Since we can't check a field set in a class_init function before
registering the type that leads to execution of that function, guard the
-cpu class lookup instead and suppress exposing these classes in -cpu ?
and in QMP.
In case someone tries to hot-add an incompatible CPU via device_add,
error out in realize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Instead of assigning *_<family> constants, set .parent to a family type.
Introduce a POWERPC_FAMILY() macro to keep type registration close to
its implementation. This macro will need tweaking later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Turn the array of model definitions into a set of self-registering QOM
types with their own class_init. Unique identifiers are obtained from
the combination of PVR, SVR and family identifiers; this requires all
alias #defines to be removed from the list. Possibly there are some more
left after this commit that are not currently being compiled.
Prepares for introducing abstract intermediate CPU types for families.
Keep the right-aligned macro line breaks within 78 chars to aid
three-way merges.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
We are about to drop the redundant name field along with ppc_def_t.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
