Migrating between different CPU versions is a bit complicated for ppc.
A long time ago, we ensured identical CPU versions at either end by
checking the PVR had the same value. However, this breaks under KVM
HV, because we always have to use the host's PVR - it's not
virtualized. That would mean we couldn't migrate between hosts with
different PVRs, even if the CPUs are close enough to compatible in
practice (sometimes identical cores with different surrounding logic
have different PVRs, so this happens in practice quite often).
So, we removed the PVR check, but instead checked that several flags
indicating supported instructions matched. This turns out to be a bad
idea, because those instruction masks are not architected information, but
essentially a TCG implementation detail. So changes to qemu internal CPU
modelling can break migration - this happened between qemu-2.6 and
qemu-2.7. That was addressed by 146c11f1 "target-ppc: Allow eventual
removal of old migration mistakes".
Now, verification of CPU compatibility across a migration basically doesn't
happen. We simply ignore the PVR of the incoming migration, and hope the
cpu on the destination is close enough to work.
Now that we've cleaned up handling of processor compatibility modes
for pseries machine type, we can do better. For new machine types
(pseries-2.10+) We allow migration if:
* The source and destination PVRs are for the same type of CPU, as
determined by CPU class's pvr_match function
OR * When the source was in a compatibility mode, and the destination CPU
supports the same compatibility mode
For older machine types we retain the existing behaviour - current CAS
code will usually set a compat mode which would break backwards
migration if we made them use the new behaviour. [Fixed from an
earlier version by Greg Kurz].
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Currently, the CPU compatibility mode is set when the cpu is initialized,
then again when the guest negotiates features. This means if a guest
negotiates a compatibility mode, then reboots, that compatibility mode
will be retained across the reset.
Usually that will get overridden when features are negotiated on the next
boot, but it's still not really correct. This patch moves the initial set
up of the compatibility mode from cpu init to reset time. The mode *is*
retained if the reboot was caused by the feature negotiation (it might
be important in that case, though it's unlikely).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Server class POWER CPUs have a "compat" property, which is used to set the
backwards compatibility mode for the processor. However, this only makes
sense for machine types which don't give the guest access to hypervisor
privilege - otherwise the compatibility level is under the guest's control.
To reflect this, this removes the CPU 'compat' property and instead
creates a 'max-cpu-compat' property on the pseries machine. Strictly
speaking this breaks compatibility, but AFAIK the 'compat' option was
never (directly) used with -device or device_add.
The option was used with -cpu. So, to maintain compatibility, this
patch adds a hack to the cpu option parsing to strip out any compat
options supplied with -cpu and set them on the machine property
instead of the now deprecated cpu property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Tested-by: Andrea Bolognani <abologna@redhat.com>
When using the 40p machine, soundhw_init() is currently called twice,
one time from vl.c and one time from ibm_40p_init(). The call in
ibm_40p_init() was likely just a copy-and-paste from a old version
of the prep machine - but there the call to audio_init() (which was
the previous name of this function) has been removed many years ago
already, with commit b3e6d591b0
("audio: enable PCI audio cards for all PCI-enabled targets"), so
we certainly also do not need the soundhw_init() in the 40p function
anymore nowadays.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Sahid Ferdjaoui <sferdjao@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In some cases a failing VMSTATE_*_EQUAL does not mean we detected a bug,
but it's actually the best we can do. Especially in these cases a verbose
error message is required.
Let's introduce infrastructure for specifying a error hint to be used if
equal check fails. Let's do this by adding a parameter to the _EQUAL
macros called _err_hint. Also change all current users to pass NULL as
last parameter so nothing changes for them.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170623144823.42936-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Move it into MigrationState, revert its meaning and renaming it to
send_section_footer, with a property bound to it. Same trick is played
like previous patches.
Removing savevm_skip_section_footers().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-9-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was in SaveState but now moved to MigrationState altogether, reverted
its meaning, then renamed to "send_configuration". Again, using
HW_COMPAT_2_3 for old PC/SPAPR machines, and accel_register_prop() for
xen_init().
Removing savevm_skip_configuration().
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-8-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put it into MigrationState then we can use the properties to specify
whether to enable storing global state.
Removing global_state_set_optional() since now we can use HW_COMPAT_2_3
for x86/power, and AccelClass.global_props for Xen.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1498536619-14548-6-git-send-email-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is an alias of TYPE_PNV_CORE's property "pir", which is defined
with DEFINE_PROP_UINT32()
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-38-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TYPE_PC_DIMM's property PC_DIMM_ADDR_PROP is defined with
DEFINE_PROP_UINT64().
TYPE_PC_DIMM's property PC_DIMM_NODE_PROP is defined with
DEFINE_PROP_UINT32().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-22-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the actual unsigned integer type name.
The type name change impacts the following externally visible area:
* vl.c's machine_help_func() puts it in help for -machine NAME,help.
* QMP command qom-list exposes it in ObjectPropertyInfo member @type.
* QMP command device-list-properties exposes it in DevicePropertyInfo
member @type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It don't belong anywhere else, just the global state where everybody
can stick other things.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
They are indpendent, and nowadays almost every device register things
with qdev->vmsd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
This reverts commit fe6824d126.
Conflicts hw/ppc/spapr_drc.c, because get_index() has been renamed
spapr_get_index().
This didn't fix the problem. Once the hotplug has been started
some memory is allocated and some structures are allocated.
We don't free it when we ignore the unplug, and we can't because
they can be in use by the kernel.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Until recently, spapr used to allocate ICPState objects for the lifetime
of the machine. They would only be associated to vCPUs in xics_cpu_setup()
when plugging a CPU core.
Now that ICPState objects have the same lifecycle as vCPUs, it is
possible to associate them during realization.
This patch hence open-codes xics_cpu_setup() in icp_realize(). The vCPU
is passed as a property. Note that vCPU now needs to be realized first
for the IRQs to be allocated. It also needs to resetted before ICPState
realization in order to synchronize with KVM.
Since ICPState objects are freed when unrealized, xics_cpu_destroy() isn't
needed anymore and can be safely dropped.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These properties are part of the XICS API. They deserve to appear
explicitely in the XICS header file.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
SLOF uses "pci" as name for PCI bridges nodes in the device tree instead
of "pci-bridges", so booting via bootindex from a device behind a PCI
bridge currently does not work since QEMU passes the wrong name in the
"qemu,boot-list" property. Fix it by changing the name of the PCI bridge
nodes to "pci" instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1459170
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similarly to what was done to spapr with commit 249127d0df, this patch
ensures that we don't keep an extra reference on the ICPState object. Also
since the object was just created and not reparented yet, the call to
object_property_add_child() should never fail: let's pass &error_abort to
make this clear.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DRC objects have a get_name method which returns the DRC name generated
when the DRC is created. Replace that with a fixed spapr_drc_name()
function which generates the name on the fly from other information. This
means:
* We get rid of a method with only one implementation, and only local
callers
* We don't have to carry the name string around for the lifetime of the
DRC
* We use information added to the class structure to generate the name
in standard format, so we don't need an explicit switch on drc type
any more
We also eliminate the 'name' property; it's basically useless since the
only information in it can easily be deduced from other things.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Both functions are fairly short, and so are their callers. There's no
particular logical distinction between them, so fold them together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC objects have attach & detach methods, but there's only one
implementation. Although there are some differences in its behaviour for
different DRC types, the overall structure is the same, so while we might
want different method implementations for some parts, we're unlikely to
want them for the top-level functions.
So, replace them with direct function calls.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
There are 3 types of "indicator" associated with hotplug in the PAPR spec
the "allocation state", "isolation state" and "DR-indicator". The first
two are intimately tied to the various state transitions associated with
hotplug. The DR-indicator, however, is different and simpler.
It's basically just a guest controlled variable which can be used by the
guest to flag state or problems associated with a device. The idea is that
the hypervisor can use it to present information back on management
consoles (on some machines with PowerVM it may even control physical LEDs
on the machine case associated with the relevant device).
For that reason, there's only ever likely to be a single update
implementation so the set_indicator_state method isn't useful. Replace it
with a direct function call.
While we're there, make some small associated cleanups:
* PAPR doesn't use the term "indicator state", just "DR-indicator" and
the allocation state and isolation state are also considered "indicators".
Rename things to be less confusing
* Fold set_indicator_state() and rtas_set_indicator_state() into a single
rtas_set_dr_indicator() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In theory the RTAS set-indicator call can be used for a number of
"indicators" defined by PAPR. In practice the only ones we're ever likely
to implement are those used for Dynamic Reconfiguration (i.e. hotplug).
Because of this, the current implementation determines the associated DRC
object, before dispatching based on the type of indicator.
However, this means we also need a check that we're dealing with a DR
related indicator at all, which duplicates some of the logic from the
switch further down.
Even though it means a bit of code duplication, things work out cleaner if
we delegate the DRC lookup to the individual indicator type functions -
and it also allows some further cleanups.
While we're there, remove references to "sensor", a copy/paste artefact
from the related, but distinct "get-sensor" call.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With some combinations of migration and hotplug we can lost temporary state
indicating how many DRCs (guest side hotplug handles) are still connected
to a DIMM object in the process of removal. When we hit that situation
spapr_recover_pending_dimm_state() is used to scan more extensively and
work out the right number.
It does this using drc->indicator state to determine what state of
disconnection the DRC is in. However, this is not safe, because the
indicator state is guest settable - in fact it's more-or-less a purely
guest->host notification mechanism which should have no bearing on the
internals of hotplug state management.
So, replace the test for this with a test on drc->dev, which is a purely
qemu side managed variable, and updated the same BQL critical section as
the indicator state.
This does introduce an off-by-one change, because the indicator state was
updated before the call to spapr_lmb_release() on the current DRC, whereas
drc->dev is updated afterwards. That's corrected by always decrementing
the nr_lmbs value instead of only doing so in the case where we didn't
have to recover information.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
DRC classes have an entity_sense method to determine (in a specific PAPR
sense) the presence or absence of a device plugged into a DRC. However,
we only have one implementation of the method, which explicitly tests for
different DRC types. This changes it to instead have different method
implementations for the two cases: "logical" and "physical" DRCs.
While we're at it, the entity sense method always returns RTAS_OUT_SUCCESS,
and the interesting value is returned via pass-by-reference. Simplify this
to directly return the value we care about
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The pseries machine type doesn't usually use the 'pvpanic' device as such,
because it has a firmware/hypervisor facility with roughly the same
purpose. The 'ibm,os-term' RTAS call notifies the hypervisor that the
guest has crashed.
Our implementation of this call was sending a GUEST_PANICKED qmp event;
however, it was not doing the other usual panic actions, making its
behaviour different from pvpanic for no good reason.
To correct this, we should call qemu_system_guest_panicked() rather than
directly sending the panic event.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
(Spotted by Coverity, CID 1375942)
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QDWB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170606' into staging
ppc patch queue 2017-06-06
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
# gpg: Signature made Tue 06 Jun 2017 03:48:50 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170606:
spapr: Remove some non-useful properties on DRC objects
spapr: Eliminate spapr_drc_get_type_str()
spapr: Move configure-connector state into DRC
spapr: Clean up spapr_dr_connector_by_*()
spapr: Introduce DRC subclasses
spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs
spapr: Allow boot from vhost-*-scsi backends
ppc/pnv: check the return value of fdt_setprop()
spapr_nvram: Check return value from blk_getlength()
target/ppc: Fixup set_spr error in h_register_process_table
target-ppc: Fix openpic timer read register offset
spapr: Make DRC get_index and get_type methods into plain functions
spapr: Abolish DRC set_configured method
spapr: Abolish DRC get_fdt method
spapr: Move DRC RTAS calls into spapr_drc.c
migration: Mark CPU states dirty before incoming migration/loadvm
migration: remove register_savevm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* 'connector_type' is easily derived from the 'index' property, so there's
no point to it (it's also implicit in the QOM type of the DRC)
* 'isolation-state', 'indicator-state' and 'allocation-state' are
part of the transaction between qemu and guest during PAPR hotplug
operations, and outside tools really have no business looking at it
(especially not changing, and these were RW properties)
* 'entity-sense' is basically just a weird PAPR encoding of whether there
is a device connected to this DRC
Strictly speaking removing these properties is breaking the qemu interface.
However, I'm pretty sure no management tools have ever used these. For
debugging there are better alternatives. Therefore, I think removing these
broken interfaces is the better option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This function was used in generating the device tree. However, now that
we have different QOM types for different DRC types we can easily store
the information we need in the class structure and avoid this specialized
lookup function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the sPAPRMachineState contains a list of sPAPRConfigureConnector
structures which store intermediate state for the ibm,configure-connector
RTAS call.
This was an attempt to separate this state from the core of the DRC state.
However the configure connector process is intimately tied to the DRC
model, so there's really no point trying to have two levels of interface
here.
Moving the configure-connector state into its corresponding DRC allows
removal of a number of helpers for maintaining the anciliary list.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* Change names to something less ludicrously verbose
* Now that we have QOM subclasses for the different DRC types, use a QOM
typename instead of a PAPR type value parameter
The latter allows removal of the get_type_shift() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we only have a single QOM type for all DRCs, but lots of
places where we switch behaviour based on the DRC's PAPR defined type.
This is a poor use of our existing type system.
So, instead create QOM subclasses for each PAPR defined DRC type. We
also introduce intermediate subclasses for physical and logical DRCs,
a division which will be useful later on.
Instead of being stored in the DRC object itself, the PAPR type is now
stored in the class structure. There are still many places where we
switch directly on the PAPR type value, but this at least provides the
basis to start to remove those.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As explained in commit 5c0139a8c2 ("spapr: fix default DRC state for
coldplugged LMBs"), guests expect cold-plugged LMBs to be pre-allocated
and unisolated. The same goes for cold-plugged CPUs.
While here, let's convert g_assert(false) to the better self documenting
g_assert_not_reached().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current implementation of spapr_get_fw_dev_path() doesn't take into
consideration vhost-*-scsi devices. This makes said devices unbootable
on PPC as SLOF is unable to work out the path to scan boot disks.
This makes VMs bootable on spapr when using vhost-*-scsi by implementing
a disk path for VHostSCSICommon (which currently includes both
vhost-user-scsi and vhost-scsi).
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
set_spr is used in the function h_register_process_table() to update the
LPCR_GTSE and LPCR_UPRT values based on the flags passed by the guest.
The set_spr function takes the last two arguments mask and value used to
mask and set the value of the spr respectively.
The current call site passes these arguments in the wrong order and thus
bot GTSE and UPRT will be set irrespective, which is obviously
incorrect.
Rearrange the function call so that these arguments are passed in the
correct order and the correct behaviour is exhibited.
It is worth noting that this wasn't detected earlier since these were
always both set in all cases where this H_CALL was made.
Fixes: 6de833070c ("target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These two methods only have one implementation, and the spec they're
implementing means any other implementation is unlikely, verging on
impossible.
So replace them with simple functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
DRConnectorClass has a set_configured method, however:
* There is only one implementation, and only ever likely to be one
* There's exactly one caller, and that's (now) local
* The implementation is very straightforward
So abolish the method entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The DRConnectorClass includes a get_fdt method. However
* There's only one implementation, and there's only likely to ever be one
* Both callers are local to spapr_drc
* Each caller only uses one half of the actual implementation
So abolish get_fdt() entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Currently implementations of the RTAS calls related to DRCs are in
spapr_rtas.c. They belong better in spapr_drc.c - that way they're closer
to related code, and we'll be able to make some more things local.
spapr_rtas.c was intended to contain the RTAS infrastructure and core calls
that don't belong anywhere else, not every RTAS implementation.
Code motion only.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
even though spapr_fixup_cpu_numa_dt() has no effect on FDT
if numa is disabled, don't call it uselessly. It makes it
obvious at call sites that function is needed only when numa
is enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Those are apparently unnecessary includes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2bwAAoJECgfDbjSjVRpNBgIALmNG7VaixhNUlnfX1n1JBnh
+HBP2zNfvi0q5roBuPFmlziKa3IBHb2Fcte4nb6QxmPg+uoaj39AOzfrrvz210kR
h2j5Qk2bCdMeWBpxI+xDDScwi/Im23Y6KN1eZyMekFr2CaSGiqOHZPPdbsyEcHPB
VylM0uHqSTZL5JAAzEuYlH+LLfPu91HoxMsIAdNuQX+qKyM2DZ4eICBQ0zA73USt
OduZltcRMk7UpvQMqY+2iaEXapXQQEUGrP2Mo8ZyqeIl2ItC33GspqBQIKjuZdrr
tpr/T1VWsLdZnURZXyELrFqrErDXvKaP9HROwvyLyYPXZF+pJ3LA7TopS5UmfNQ=
=Z4xG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_upstream' into staging
pci, virtio, vhost: fixes
A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 May 2017 01:10:24 AM BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* mst/tags/for_upstream:
acpi-test: update expected files
pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry
vhost-user: pass message as a pointer to process_message_reply()
virtio_net: Bypass backends for MTU feature negotiation
intel_iommu: turn off pt before 2.9
intel_iommu: support passthrough (PT)
intel_iommu: allow dev-iotlb context entry conditionally
intel_iommu: use IOMMU_ACCESS_FLAG()
intel_iommu: provide vtd_ce_get_type()
intel_iommu: renaming context entry helpers
x86-iommu: use DeviceClass properties
memory: remove the last param in memory_region_iommu_replay()
memory: tune last param of iommu_ops.translate()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Assorted accumulated patches. These are nearly all bugfixes at one
level or another - some for longstanding problems, others for some
regressions caused by more recent cleanups.
This includes preliminary patches towards fixing migration for Radix
Page Table guests under POWER9 and also fixing some migration
regressions due to the re-organization of the interrupt controller
code. Not all the pieces are there yet, so those still won't quite
work, but the preliminary changes make sense on their own.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=nlnV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170525' into staging
ppc patch queue 2017-05-25
Assorted accumulated patches. These are nearly all bugfixes at one
level or another - some for longstanding problems, others for some
regressions caused by more recent cleanups.
This includes preliminary patches towards fixing migration for Radix
Page Table guests under POWER9 and also fixing some migration
regressions due to the re-organization of the interrupt controller
code. Not all the pieces are there yet, so those still won't quite
work, but the preliminary changes make sense on their own.
# gpg: Signature made Thu 25 May 2017 04:50:00 AM BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* dgibson/tags/ppc-for-2.10-20170525:
xics: add unrealize handler
hw/ppc/spapr.c: recover pending LMB unplug info in spapr_lmb_release
hw/ppc: migrating the DRC state of hotplugged devices
hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque
hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineState
spapr: add pre_plug function for memory
pseries: Restore support for total vcpus not a multiple of threads-per-core for old machine types
pseries: Split CAS PVR negotiation out into a separate function
spapr: fix error reporting in xics_system_init()
spapr_cpu_core: drop reference on ICP object during CPU realization
hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntry
spapr: ensure core_slot isn't NULL in spapr_core_unplug()
xics_kvm: cache already enabled vCPU ids
spapr: Consolidate HPT freeing code into a routine
spapr-cpu-core: release ICP object when realization fails
spapr: sanitize error handling in spapr_ics_create()
ppc/xics: simplify prototype of xics_spapr_init()
target/ppc: reset reservation in do_rfi()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
