tb_lock() has long been used for linux-user mode to protect code
generation. By enabling it now we prepare for MTTCG and ensure all code
generation is serialised by this lock. The other major structure that
needs protecting is the l1_map and its PageDesc structures. For the
SoftMMU case we also use tb_lock() to protect these structures instead
of linux-user mmap_lock() which as the name suggests serialises updates
to the structure as a result of guest mmap operations.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along. As an cpu->exit_request may legitimately get squashed
while processing the EXCP_INTERRUPT exception we also check
cpu->queued_work_first to ensure queued work is expedited as soon as
possible.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Currently we rely on the side effect of the main loop grabbing the
iothread_mutex to give any long running basic block chains a kick to
ensure the next vCPU is scheduled. As this code is being re-factored and
rationalised we now do it explicitly here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
We'll be using the memory ordering definitions to define values for
both the host and guest. To avoid fighting with circular header
dependencies just move these types into their own minimal header.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The recent patch enabling lock assertions uncovered the missing lock
acquisition in cpu_exec_step(). This patch adds them.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Enable tcg lock debug asserts in a debug build by default instead of
relying on DEBUG_LOCKING. None of the other DEBUG_* macros have
asserts, so this patch removes DEBUG_LOCKING and enable these asserts
in a debug build.
CC: Richard Henderson <rth@twiddle.net>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[AJB: tweak ifdefs so can be early in series]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This documents the current design for upgrading TCG emulation to take
advantage of modern CPUs by running a thread-per-CPU. The document goes
through the various areas of the code affected by such a change and
proposes design requirements for each part of the solution.
The text marked with (Current solution[s]) to document what the current
approaches being used are.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For TIC CCW, bit positions 8-32 of the format-1 CCW must contain zeros;
otherwise, a program-check condition is generated. For format-0 TIC CCWs,
bits 32-63 are ignored.
To convert TIC from format-0 CCW to format-1 CCW correctly, let's clear
bits 8-32 to guarantee compatibility.
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
we need to pass the cpuid into the pid field of the notes
section, otherwise the notes for different CPUs all have 0:
e.g. objdump -h shows:
old:
5 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/0 00000004 0000000000000000 0000000000000000
new:
5 .reg-s390-prefix/1 00000004 0000000000000000 0000000000000000
6 .reg-s390-prefix 00000004 0000000000000000 0000000000000000
21 .reg-s390-prefix/2 00000004 0000000000000000 0000000000000000
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In binutils/libbfd (bfd/elf.c) it is enforced that all s390
specific ELF notes like e.g. NT_S390_PREFIX or NT_S390_CTRS
have "LINUX" specified as note name and that the namesz is
6. Otherwise the notes are ignored.
QEMU currently uses "CORE" for these notes. Up to now this has
not been a real problem because the dump analysis tool "crash"
does handle that. But it will break all programs that use libbfd
for processing ELF notes.
So fix this and use "LINUX" for all s390 specific notes to comply
with libbfd. Also set the correct namesz.
Reported-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The maximal number of virtqueues per device can be limited on a per
transport basis. For virtio-ccw this limit is defined by
VIRTIO_CCW_QUEUE_MAX, however the limitation used to come form the
number of adapter routes supported by flic (via notifiers).
Recently the limitation of the flic was adjusted so that it can
accommodate VIRTIO_QUEUE_MAX queues, and is in the meanwhile checked for
separately too.
Let us remove the transport specific limitation of virtio-ccw by
dropping VIRTIO_CCW_QUEUE_MAX and using VIRTIO_QUEUE_MAX instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's increase ADAPTER_ROUTES_MAX_GSI to VIRTIO_QUEUE_MAX which is the
largest demand foreseeable at the moment. Let us add a compatibility
macro for the previous machines so client code can maintain backwards
migration compatibility
To not mess up migration compatibility for virtio-ccw
VIRTIO_CCW_QUEUE_MAX is left at it's current value, and will be dropped
when virtio-ccw is converted to use the capability of the flic
introduced by this patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Currently VIRTIO_CCW_QUEUE_MAX is defined as ADAPTER_ROUTES_MAX_GSI.
That is when checking queue max we implicitly check the constraint
concerning the number of adapter routes. This won't be satisfactory any
more (due to backward migration considerations) if ADAPTER_ROUTES_MAX_GSI
changes (ADAPTER_ROUTES_MAX_GSI is going to change because we want to
support up to VIRTIO_QUEUE_MAX queues per virtio-ccw device).
Let us introduce a check on a recently introduce flic property which
gives us the compatibility machine aware limit on adapter routes.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make virtio-ccw supports more that 64 virtqueues we will have to
increase ADAPTER_ROUTES_MAX_GSI which is currently limiting the number if
possible adapter routes. Of course increasing the number of supported
routes can break backwards migration.
Let us introduce a compatibility property adapter_routes_max_batch so
client code can use the some old limit if in compatibility mode and
retain the migration compatibility.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We cannot support more than 64 virtqueues with the 64 bits provided by
classic indicators. If a driver tries to setup classic indicators
(which it is free to do even for virtio-1 devices) for a device with
more than 64 virtqueues, we should reject the attempt so that the
driver does not end up with an unusable device.
This is in preparation for bumping the number of supported virtqueues
on the ccw transport.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Wire up virtio-crypto for the CCW based VIRTIO.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
As a preparation for wiring-up virtio-crypto, the first non-transitional
virtio device on the ccw transport, let us introduce a mechanism for
disabling revision 0. This is more or less equivalent with disabling
legacy as revision 0 is legacy only, and legacy drivers use the revision
0 exclusively.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Current code puts a 'FLIC_FAILED' marker into the migration stream
to indicate something went wrong while saving flic state and fails
load if it encounters that marker. VMState's put routine recently
gained the ability to return error codes (but did not wire it up
yet).
In order to be able to reap the benefits of returning an error and
failing migration on the source already once this gets wired up
in core, return an error in addition to storing 'FLIC_FAILED'.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Sometimes (e.g. early boot) a guest is broken in such ways that it loops
100% delivering operation exceptions (illegal operation) but the pgm new
PSW is not set properly. This will result in code being read from
address zero, which usually contains another illegal op. Let's detect
this case and put the guest in crashed state. Instead of only detecting
this for address zero apply a heuristic that will work for any program
check new psw so that it will also reach the crashed state if you
provide some random elf file to the -kernel option.
We do not want guest problem state to be able to trigger a guest panic,
e.g. by faulting on an address that is the same as the program check
new PSW, so we check for the problem state bit being off.
With this we
a: get rid of CPU consumption of such broken guests
b: keep the program old PSW. This allows to find out the original illegal
operation - making debugging such early boot issues much easier than
with single stepping
This relies on the kernel using a similar heuristic and passing such
operation exceptions to user space.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The DPRINTF approach is likely to introduce bitrot, and the preferred
way for debugging is tracing anyway. Fortunately, there are no users
(left), so nuke it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Python is no longer installed implicitly, but the QEMU build system
requires it. List it in PACKAGES.
Reported-by: Auger Eric <eric.auger@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170222021801.28658-1-famz@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The docker framework is really just another piece in the build
automation puzzle so lets merge it together. For added bonus I've also
included the Travis and Patchew status links. The Shippable links will
be added later once mainline tests have been configured and setup.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170220105139.21581-5-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Ostensibly Shippable offers a similar set of services as Travis.
However they are focused on Docker container based work-flows so we
can use our existing containers to run a few extra builds - in this
case a bunch of cross-compiled targets on a Debian multiarch system.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170220105139.21581-4-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
This provides a basic Debian install with access to the emdebian cross
compilers. The debian-armhf-cross and debian-arm64-cross targets build
on the basic Debian image to allow cross compiling to those targets.
A new environment variable (QEMU_CONFIGURE_OPTS) is set as part of the
docker container and passed to the build to specify the
--cross-prefix. The user still calls the build in the usual way, for
example:
make docker-test-build@debian-arm64-cross \
TARGET_LIST="aarch64-softmmu,aarch64-linux-user"
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-3-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently all docker builds are done by exporting a tarball to the
docker container and running the build as the containers root user.
Other use cases are possible however and it is possible to map a part
of users file-system to the container. This is useful for example for
doing cross-builds of arbitrary source trees. For this to work
smoothly the container needs to have a user created that maps cleanly
to the host system.
This adds a -u option to the docker script so that:
DEB_ARCH=armhf DEB_TYPE=stable ./tests/docker/docker.py build \
-u --include-executable=arm-linux-user/qemu-arm \
debian:armhf ./tests/docker/dockerfiles/debian-bootstrap.docker
Will build a container that can then be run like:
docker run --rm -it -v /home/alex/lsrc/qemu/risu.git/:/src \
--user=alex:alex -w /src/ debian:armhf \
sh -c "make clean && ./configure -s && make"
All docker containers built will add the current user unless
explicitly disabled by specifying NOUSER when invoking the Makefile:
make docker-image-debian-armhf-cross NOUSER=1
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170220105139.21581-2-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
parse_option_size()'s checking for overflow and trailing crap is
wrong. Has always been that way. qemu_strtosz() gets it right, so
use that.
This adds support for size suffixes 'P', 'E', and ignores case for all
suffixes, not just 'k'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-25-git-send-email-armbru@redhat.com>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.
Only test_qemu_strtosz_simple() passes a null @endptr. No functional
change there, because its conversion consumes the string.
Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-21-git-send-email-armbru@redhat.com>
Leave testing unit suffixes to test_qemu_strtosz_units().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-20-git-send-email-armbru@redhat.com>
Use qemu_strtosz() instead of qemu_strtosz_MiB() where it doesn't
really make a difference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-19-git-send-email-armbru@redhat.com>
Writing QEMU_STRTOSZ_DEFSUFFIX_* instead of '*' gains nothing. Get
rid of these eyesores.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-18-git-send-email-armbru@redhat.com>
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B.
Capture the pattern in new qemu_strtosz().
Inline qemu_strtosz_suffix() into its only remaining caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
To parse numbers with metric suffixes, we use
qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000)
Capture this in a new function for legibility:
qemu_strtosz_metric(nptr, &eptr)
Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric().
Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal
linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-14-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-13-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-12-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-11-git-send-email-armbru@redhat.com>
parse_option_number() fails to check for these errors after
strtoull(). Has always been broken. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-10-git-send-email-armbru@redhat.com>
Reorder check_strtox_error() to make it obvious that we always store
through a non-null @endptr.
Transform
if (some error) {
error case ...
err = value for error case;
} else {
normal case ...
err = value for normal case;
}
return err;
to
if (some error) {
error case ...
return value for error case;
}
normal case ...
return value for normal case;
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-9-git-send-email-armbru@redhat.com>
Name same things the same, different things differently.
* qemu_strtol()'s parameter @nptr is called @p in
check_strtox_error(). Rename the latter.
* qemu_strtol()'s parameter @endptr is called @next in
check_strtox_error(). Rename the latter.
* qemu_strtol()'s variable @p is called @endptr in
check_strtox_error(). Rename both to @ep.
* qemu_strtol()'s variable @err is *negative* errno,
check_strtox_error()'s parameter @err is *positive*. Rename the
latter to @libc_errno.
Same for qemu_strtoul(), qemu_strtoi64(), qemu_strtou64(), of course.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-8-git-send-email-armbru@redhat.com>
The name qemu_strtoll() suggests conversion to long long, but it
actually converts to int64_t. Rename to qemu_strtoi64().
The name qemu_strtoull() suggests conversion to unsigned long long,
but it actually converts to uint64_t. Rename to qemu_strtou64().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-7-git-send-email-armbru@redhat.com>
Fixes the following documentation bugs:
* Fails to document that null @nptr is safe.
* Fails to document that we return -EINVAL when no conversion could be
performed (commit 47d4be1).
* Confuses long long with int64_t, and unsigned long long with
uint64_t.
* Claims the unsigned conversions can underflow. They can't.
While there, mark problematic assumptions that int64_t is long long,
and uint64_t is unsigned long long with FIXME comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-6-git-send-email-armbru@redhat.com>
Use unsigned comparisons to check the result of qemu_strtoul() and
strtoull().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-5-git-send-email-armbru@redhat.com>