We were using -1 instead of the real size because the functions check
what is bigger, size in bytes or the size of the iov. Recent gcc's
barf at this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--
Remove comments about this feature.
Fix missing -1.
The 194 test has a lot of code that assumes a simple image file. Rewriting
this to work with luks is possible, but non-trivial, so blacklist the
luks format for now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170901105434.3288-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
[eblake: commit message typo fixed]
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The LUKS driver requires extra args to QEMU to setup passwords.
The _launch_qemu function takes care of this, so convert the
test to use this function and use correct -drive syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170901105434.3288-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
tests/vhost-user-test keeps failing on build-system since Aug 15:
ERROR:tests/vhost-user-test.c:835:test_flags_mismatch: child process (/i386/vhost-user/flags-mismatch/subprocess [4836]) failed unexpectedly
...
ERROR:tests/vhost-user-test.c:807:test_connect_fail: child process (/x86_64/vhost-user/connect-fail/subprocess [58910]) failed unexpectedly
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170905180602.28698-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
timer_cb() needs to know about the current Aio context of the throttle
request that is woken up. In order to make ThrottleGroupMember backend
agnostic, this information is stored in an aio_context field instead of
accessing it from BlockBackend.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state. Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future. The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TLS I/O channel test had mistakenly used && instead
of || when checking for handshake completion. As a
result it could terminate the handshake process before
it had actually completed. This was harmless before but
changes in GNUTLS 3.6.0 exposed this bug and caused the
test suite to fail.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These functions wait until they are able to read / write the full
requested data buffer(s).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch from atexit.register() to a more elegant idiom of declaring
resources in a with statement:
with FilePath('monitor.sock') as monitor_path,
VM() as vm:
...
The files and VMs will be automatically cleaned up whether the test
passes or fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The scratch/ (TEST_DIR) directory is not automatically cleaned up after
test execution. It is the responsibility of tests to remove any files
they create.
A nice way of doing this is to declare files at the beginning of the
test and automatically remove them with a context manager:
with iotests.FilePath('test.img') as img_path:
qemu_img(...)
qemu_io(...)
# img_path is guaranteed to be deleted here
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all usages have been converted to user lookup helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-14-marcandre.lureau@redhat.com>
[Rebased, superfluous local variable dropped, missing
check-qom-proplist.c update added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-17-git-send-email-armbru@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently, the FOO_lookup[] generated for QAPI enum types are
terminated by a NULL sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, replace "have we reached the sentinel?"
predicates by "have we reached the FOO__MAX value?" predicates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
We check that all members of the QLit list are also in the QList. We
neglect to check the other direction. Fix that.
While there, use QLIST_FOREACH_ENTRY() to simplify the code and break
the loop on the first mismatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170825105913.4060-13-marcandre.lureau@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We check that all members of the QLit dictionary are also in the
QDict. We neglect to check the other direction.
Comparing the number of members suffices, because QDict can't
contain duplicate members, and putting duplicates in a QLit is a
programming error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170825105913.4060-12-marcandre.lureau@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make it more obvious about the expected return values.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
compare_litqobj_to_qobj() lacks a qlit_ prefix. Moreover, "compare"
suggests -1, 0, +1 for less than, equal and greater than. The
function actually returns non-zero for equal, zero for unequal.
Rename to qlit_equal_qobject().
Its return type will be cleaned up in the next patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename from LiteralQ to QLit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix code style issues while at it, to please checkpatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A command is a query if it has no side effect and yields a result.
Such commands are typically named query-FOO, but there are exceptions.
The basic idea is to find candidates with query-qmp-schema, filter out
the ones that aren't queries with an explicit blacklist, and test the
remaining ones against a QEMU with no special arguments.
The current blacklist is just add-fd.
The test can't do queries with arguments, because it knows nothing
about the arguments. No coverage for query-cpu-model-baseline,
query-cpu-model-comparison, query-cpu-model-expansion, query-rocker,
query-rocker-ports, query-rocker-of-dpa-flows, and
query-rocker-of-dpa-groups.
Most tested commands are expected to succeed. The test does not check
the return value then.
query-balloon and query-vm-generation-id are expected to fail because
they need a virtio-balloon / vmgenid device to succeed, and this test
is too dumb to set one up. Could be addressed later.
query-acpi-ospm-status and query-hotpluggable-cpus are expected to
fail because they require features provided only by special machine
types, and this test is too dumb to set that up. Could also be
addressed later.
Several commands may either be functional or stubs that always fail,
depending on build configuration. Ideally, the stubs shouldn't be in
query-qmp-schema, but that requires QAPI schema compile-time
configuration, which we don't have, yet. Until we do, we need to
figure out whether a command is a stub. When we have a suitable
CONFIG_FOO preprocessor symbol is available, use that. Else,
simply blacklist the command for now.
We get basic test coverage for the following commands, except as
noted:
qom-list-types
query-acpi-ospm-status (expected to fail)
query-balloon (expected to fail)
query-block
query-block-jobs
query-blockstats
query-chardev
query-chardev-backends
query-command-line-options
query-commands
query-cpu-definitions (blacklisted for now)
query-cpus
query-dump
query-dump-guest-memory-capability
query-events
query-fdsets
query-gic-capabilities (blacklisted for now)
query-hotpluggable-cpus (expected to fail)
query-iothreads
query-kvm
query-machines
query-memdev
query-memory-devices
query-mice
query-migrate
query-migrate-cache-size
query-migrate-capabilities
query-migrate-parameters
query-name
query-named-block-nodes
query-pci (blacklisted for now)
query-qmp-schema
query-rx-filter
query-spice
query-status
query-target
query-tpm
query-tpm-models
query-tpm-types
query-uuid
query-version
query-vm-generation-id (expected to fail)
query-vnc
query-vnc-servers
query-xen-replication-status
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1502461148-10154-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Typos in code under #ifndef and in the commit message fixed]
The test-io-channel-tls test was mistakenly using two of the
same directories as test-crypto-tlssession. This causes a
sporadic failure when using make -j$BIGNUM.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GNUTLS 3.6.0 marked SHA1 as untrusted for certificates.
Unfortunately the gnutls_x509_crt_sign() method we are
using to create certificates in the test suite is fixed
to always use SHA1. We must switch to a different method
and explicitly ask for SHA256.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
$ make check-speed
tests/benchmark-crypto-hash.c: In function 'test_hash_speed':
tests/benchmark-crypto-hash.c:44:5: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' [-Werror=format=]
g_print("Testing chunk_size %ld bytes ", chunk_size);
^
tests/benchmark-crypto-hash.c: In function 'main':
tests/benchmark-crypto-hash.c:62:9: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Werror=format=]
snprintf(name, sizeof(name), "/crypto/hash/speed-%lu", i);
^
cc1: all warnings being treated as errors
rules.mak:66: recipe for target 'tests/benchmark-crypto-hash.o' failed
make: *** [tests/benchmark-crypto-hash.o] Error 1
Reviewed-by: Longpeng(Mike) <longpeng@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The conflict check added by commit c0644771 ("qapi: Reject
alternates that can't work with keyval_parse()") doesn't work
with the following declaration:
{ 'alternate': 'Alt',
'data': { 'one': 'bool',
'two': 'str' } }
It crashes with:
Traceback (most recent call last):
File "./scripts/qapi-types.py", line 295, in <module>
schema = QAPISchema(input_file)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 1468, in __init__
self.exprs = check_exprs(parser.exprs)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 958, in check_exprs
check_alternate(expr, info)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 830, in check_alternate
% (name, key, types_seen[qtype]))
KeyError: 'QTYPE_QSTRING'
This happens because the previously-seen conflicting member
('one') can't be found at types_seen[qtype], but at
types_seen['QTYPE_BOOL'].
Fix the bug by moving the error check to the same loop that adds
new items to types_seen, raising an exception if types_seen[qt]
is already set.
Add two additional test cases that can detect the bug.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170717180926.14924-1-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>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=jCiK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/tidy-pull-request' into staging
# gpg: Signature made Thu 31 Aug 2017 11:29:33 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/tidy-pull-request: (29 commits)
eepro100: replace g_malloc()+memcpy() with g_memdup()
test-iov: replace g_malloc()+memcpy() with g_memdup()
i386: replace g_malloc()+memcpy() with g_memdup()
i386: introduce ELF_NOTE_SIZE macro
decnumber: use DIV_ROUND_UP
kvm: use DIV_ROUND_UP
i386/dump: use DIV_ROUND_UP
ppc: use DIV_ROUND_UP
msix: use DIV_ROUND_UP
usb-hub: use DIV_ROUND_UP
q35: use DIV_ROUND_UP
piix: use DIV_ROUND_UP
virtio-serial: use DIV_ROUND_UP
console: use DIV_ROUND_UP
monitor: use DIV_ROUND_UP
virtio-gpu: use DIV_ROUND_UP
vga: use DIV_ROUND_UP
ui: use DIV_ROUND_UP
vnc: use DIV_ROUND_UP
vvfat: use DIV_ROUND_UP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
iQEcBAABAgAGBQJZp8cdAAoJEJykq7OBq3PIyeQIALXlHMTJM+I2dfUZfkIYFrEk
Euf0z1URMJ9k5hKy1kIhAVlmGWs2fB1snTCm9tZjCtPqMjH5EDWb8z+zrqmorpcQ
LyIccYdT/XrFeU1x+n4PlhaubQKXiAfZbUbgZpbkZwGgX0k51gx3V9z1smHme6AX
CIODhgotqbJ0Hy2kuAP8TM2OPgx1tcyel34GuT5e3Rrb8nL0QfHfG4nxcpWBB0q8
iipoJfBvKWpRV0azSg+s51x1FFcB3iDKr81uBVABOyLtVW13nF6EMRIP76rqy5qp
relNDo6kdmh0W19motNPjOa4BhnPQakEfF+bdARBOJPbXsFzd5X193yQBKW+nq4=
=5ltA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Thu 31 Aug 2017 09:21:49 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qcow2: allocate cluster_cache/cluster_data on demand
qemu-doc: Add UUID support in initiator name
tests: migration/guestperf Python 2.6 argparse compatibility
docker.py: Python 2.6 argparse compatibility
scripts: add argparse module for Python 2.6 compatibility
misc: Remove unused Error variables
oslib-posix: Print errors before aborting on qemu_alloc_stack()
throttle: Test the valid range of config values
throttle: Make burst_length 64bit and add range checks
throttle: Make LeakyBucket.avg and LeakyBucket.max integer types
throttle: Remove throttle_fix_bucket() / throttle_unfix_bucket()
throttle: Make throttle_is_valid() a bit less verbose
throttle: Update the throttle_fix_bucket() documentation
throttle: Fix wrong variable name in the header documentation
nvme: Fix get/set number of queues feature, again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>
083 only tests TCP. Some failures might be specific to UNIX domain
sockets.
A few adjustments are necessary:
1. Generating a port number and waiting for server startup is
TCP-specific. Use the new nbd-fault-injector.py startup protocol to
fetch the address. This is a little more elegant because we don't
need netstat anymore.
2. The NBD filter does not work for the UNIX domain sockets URIs we
generate and must be extended.
3. Run all tests twice: once for TCP and once for UNIX domain sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-4-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently 083 waits for the nbd-fault-injector.py server to start up by
looping until netstat shows the TCP listen socket.
The startup protocol can be simplified by passing a 0 port number to
nbd-fault-injector.py. The kernel will allocate a port in bind(2) and
the final port number can be printed by nbd-fault-injector.py.
This should make it slightly nicer and less TCP-specific to wait for
server startup. This patch changes nbd-fault-injector.py, the next one
will rewrite server startup in 083.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-3-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is the follow-up patch that was discussed[*] as part of feedback to
qemu-iotest 194.
Changes in this patch:
- Supply 'job-id' parameter to `drive-mirror` invocation.
- Once migration completes, issue QMP `block-job-cancel` command on
the source QEMU to gracefully complete `drive-mirror` operation.
- Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server
on the destination QEMU.
- Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED.
With the above, the test will also be (almost) in sync with the
procedure outlined in the document 'live-block-operations.rst'[+]
(section: "QMP invocation for live storage migration with
``drive-mirror`` + NBD").
[*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html
-- qemu-iotests: add 194 non-shared storage migration test
[+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20170829165058.8229-1-kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With some small modifications, we can also use the the netfilter,
the filter-mirror and the filter-redirector tests on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-3-git-send-email-thuth@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This way we can get rid of the ugly #ifdefs in the code which makes
it easier to extend later.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Re-using the boot_sector code buffer from x86 for other architectures
is not very nice, especially if we add more architectures later. It's
also ugly that the test uses a huge pre-initialized array at all - the
size of the executable is very huge due to this array. So let's use a
separate buffer for each architecture instead, allocated from the heap,
so that we really just use the memory that we need.
Suggested-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the throttling limits set with the throttling.iops-* and
throttling.bps-* options and their QMP equivalents defined in the
BlockIOThrottle struct are integer values.
Those limits are also reported in the BlockDeviceInfo struct and they
are integers there as well.
Therefore there's no reason to store them internally as double and do
the conversion everytime we're setting or querying them, so this patch
uses uint64_t for those types. Let's also use an unsigned type because
we don't allow negative values anyway.
LeakyBucket.level and LeakyBucket.burst_level do however remain double
because their value changes depending on the fraction of time elapsed
since the previous I/O operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: f29b840422767b5be2c41c2dfdbbbf6c5f8fedf8.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Non-shared storage migration with NBD and drive-mirror is currently not
tested by qemu-iotests. This test case covers the basic migration
scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: <20170823134242.12080-1-famz@redhat.com>
Message-Id: <20170823140506.28723-1-stefanha@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prefer to use the tcg accelarator if it is available: This is our only
real smoke test for tcg, and fast enough to use it for that.
Fixes: 480bc11e6 ("boot-serial-test: fallback to kvm accelerator")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 093 throttling test submits twice as many requests as the throttle
limit in order to ensure that we reach the limit. The remaining
requests are left in-flight at the end of each test iteration.
Commit 452589b6b4 ("vl.c/exit: pause cpus
before closing block devices") exposed a hang in 093. This happens
because requests are still in flight when QEMU terminates but
QEMU_CLOCK_VIRTUAL time is frozen. bdrv_drain_all() hangs forever since
throttled requests cannot complete.
Step the clock at the end of each test iteration so in-flight requests
actually finish. This solves the hang and is cleaner than leaving tests
in-flight.
Note that this could also be "fixed" by disabling throttling when drives
are closed in QEMU. That approach has two issues:
1. We must drain requests before disabling throttling, so the hang
cannot be easily avoided!
2. Any time QEMU disables throttling internally there is a chance that
malicious users can abuse the code path to bypass throttling limits.
Therefore it makes more sense to fix the test case than to modify QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170815130502.8736-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This ease rebase/cherry-pick, also it is faster to visually find if a package
is here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170728233316.13352-2-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The check script contains a commented out root user requirement,
probably because of its xfstests heritage. This requirement doesn't
apply to qemu-iotests, so it better be gone.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables FULL_MKFS_OPTIONS and FULL_MOUNT_OPTIONS are commented
out, never used, and even refer to functions that do exist. The last
time these were touched was around 8 years ago, so I guess it's safe
to assume outputting such information on test execution is still on the
radar.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although this function is used, its implementation does nothing
besides echoing a variable name. There's no need to wrap this
functionality in a function, and based on the one usage it has, it's
not even required to adhere to a convention or code style.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s/continuosly/continuously/
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, at least x86_64 and s390x support building with --disable-tcg.
Instead of forcing tcg (which causes the test to fail on such builds),
allow to use kvm as well.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
185 can sometimes produce wrong output like this:
185 2s ... - output mismatch (see 185.out.bad)
--- /work/src/qemu/master/tests/qemu-iotests/185.out 2017-07-14 \
15:14:29.520343805 +0300
+++ 185.out.bad 2017-08-07 16:51:02.231922900 +0300
@@ -37,7 +37,7 @@
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 4194304, "offset": 4194304, "speed": 65536, "type": \
"mirror"}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 0, "offset": 0, "speed": 65536, "type": "mirror"}}
=== Start backup job and exit qemu ===
Failures: 185
Failed 1 of 1 tests
This is because, under heavy load, the quit can happen before the first
iteration of the mirror request has occurred. To make sure we've had
time to iterate, let's just add a sleep for 0.5 seconds before quitting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b43671f8 accidentally broke run_test.sh within tests/multiboot;
due to a subtle change in whitespace.
These two commands produce theh same output (at least, for sane $IFS
of space-tab-newline):
echo -e "...$@..."
echo -e "...$*..."
But that's only because echo inserts spaces between multiple arguments
(the $@ case), while the $* form gives a single argument to echo with
the spaces already present.
But when converting to printf %b, there are no automatic spaces between
multiple arguments, so we HAVE to use $*.
It doesn't help that run_test.sh isn't part of 'make check'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170809160212.29976-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently abort handlers only work for the first test function
in a testcase, because the list of abort handlers is not properly
cleared when qtest_quit() is called.
qtest_quit() only deletes the kill_qemu_hook but doesn't completely
clear the abrt_hooks list. The effect is that abrt_hooks.is_setup is
never set to false and in a following test the abrt_hooks list is not
initialized and setup_sigabrt_handler() is not called.
One way to solve this is to clear the list in qtest_quit(), but
that means only asserts between qtest_start and qtest_quit will
be catched by the abort handler.
We can make abort handlers work in all cases if we always setup the
signal handler for SIGABRT in qtest_init.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This serves as a regression test for the bugs that were just fixed for
bdrv_reopen() between read-only and read-write mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This option was only added to allow 'null-co://' and 'null-aio://' as
filenames, its value never served any actual purpose and was ignored.
Nevertheless it was accepted as '-drive driver=null,filename=foo'.
The correct way to enable the protocol prefixes (and that without adding
a useless -drive option) is implementing .bdrv_parse_filename. This is
what this patch does.
Technically, this is an incompatible change, but the null block driver
is only used for benchmarking, testing and debugging, and an option
without effect isn't likely to be used by anyone anyway, so no bad
effects are to be expected.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A race condition is currently present between the clean up attempt of
the QEMU process and the execution of qemu-img. The actual (bad)
output is:
-Warning: Image size mismatch!
-Images are identical.
+qemu-img: Could not open '<build_dir>/tests/qemu-iotests/scratch/t.raw': Failed to get "consistent read" lock
+Is another process using the image?
A KILL signal is sent to the QEMU process, but qemu-img may begin to
run before the QEMU process is really gone. qemu-img will then
attempt to open the TEST_IMG file before it can secure a lock on it.
This attempts a more graceful shutdown, and waits for the QEMU process
to exit.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
testchardev2 is not a valid chardev id here. Use testchardev1
instead which has been created with chardev-add right before
the 'chardev-send-break' line.
And while we're at it, add the test-hmp.c file to the MAINTAINERS
file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1501149097-19071-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZgPRvAAoJECgfDbjSjVRpUKAH/RE1PohaH/klzEVFLPZUdISN
/1zOdFN0BgVOUxS2udLVdZBUrWBiJWt11fbzASeGtOu3ruTpVfp69C7HUH8z4MOB
cyBWgtcf7qQc9cqE0VGO1kLU+ujSyPlkZonjWVfeCrf298SElIXUNVXcihqVsglA
VAL+tIUFT2Bbc3SH5xGsqHCMAy1hNRkEuF5t7enphOoxm7CdqghDLMfUEW65igYg
XNt3DELfFDQVnwGP8DWSWjgLVAvGAGWGNHQ9QD/FO5mdVrXh1lukV8ZtXf6K2VJc
svR670n3ZbMOkEIOGJYcYUFEKMgJXLNEpQX8WRM+vjnuEpDML6bBROtA8hckRv8=
=9TSs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio: fixes, test speedup for rc1
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 01 Aug 2017 22:36:47 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pc: acpi: force FADT rev1 for 440fx based machine types
pc: make 'pc.rom' readonly when machine has PCI enabled
vhost-user: fix watcher need be removed when vhost-user hotplug
tests/bios-tables-test: Compiler warning fix
accel: cleanup error output
intel_iommu: use access_flags for iotlb
intel_iommu: fix iova for pt
vhost-user: fix legacy cross-endian configurations
vhost: fix a memory leak
tests: switch pxe and vm gen id tests to use kvm
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc 7.1.1 in fedora 26 moans about the:
tables = g_new0(uint32_t, tables_nr)
because it can't convince itself that tables_nr is positive.
This is fallout from g_assert_cmpint no longer necessarily being
no-return; replace it with a plain g_assert.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Speed up tests on host systems with kvm support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-iotests 059 left a whole lot of image files behind in the scratch
directory because VMDK creates additional files for extents and cleaning
them up requires the original image intact (it parses qemu-img info
output to find all extent files), but the image overwrote it many times
like it works for all other image formats.
In addition, _use_sample_img overwrites the TEST_IMG variable, causing
new images created afterwards to reuse the name of the sample file
rather than the usual t.IMGFMT.
This patch adds an intermediate _cleanup_test_img after each subtest
that created an image file with additional extent files, and also after
each use of a sample image. _cleanup_test_img is also changed so that it
resets TEST_IMG after a sample image is cleaned up.
Note that this test was failing before this commit and continues to do
so after it. This failure was introduced in commit 9877860 ('block/vmdk:
Report failures in vmdk_read_cid()') and needs to be dealt with
separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because
it used the wrong suffix. Make sure to clean it up after completing the
test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and
potentially a file called '42' in the current directory. Make sure to
clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 153 left t.qcow2.c behind in the scratch directory. Make
sure to clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 141 attempted to use brace expansion to remove all images
with a single command. However, for this to work, the braces shouldn't
be quoted.
With this fix, the tests correctly cleans up its scratch images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 074 and 179 left a blkdebug.conf behind in the scratch
directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 041 left quorum_snapshot.img and target.img behind in the
scratch directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had a bug for multiple releases where dirty-bitmap count was
documented in bytes but reported in sectors; enhance the testsuite
to add coverage of DirtyBitmapInfo to ensure we do not regress again.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without redirecting qemu's stderr to stdout, _filter_qemu will not apply
to warnings. This results in $QEMU_PROG not being replaced by QEMU_PROG
which is not great if your qemu executable is not called
qemu-system-x86_64 (e.g. qemu-system-i386).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On one hand, the _make_test_img invocation for creating the target image
was missing a -u because its backing file is not supposed to exist at
that point.
On the other hand, nobody noticed probably because the backing file is
created later on and _cleanup failed to remove it: The quotation marks
were misplaced so bash tried to delete a file literally called
"$TEST_IMG{,.target}..." instead of performing brace expansion. Thus, the
files stayed around after the first run and qemu-img create did not
complain about a missing backing file on any run but the first.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allow a one liner from fresh repository clone, i.e.:
./configure && make -j check-qtest-aarch64
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If slirp is disabled, it will fail with:
qemu-system-x86_64: -netdev user,id=qtest-bn0: Parameter 'type' expects a netdev backend type
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
user_creatable_add_opts() returns a reference (the other reference is
for the root parent/child link).
Leak introduced in commit a1af255f06.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commits 70f17a1 ('error: Revert unwanted change of warning messages')
and e1824e5 ('qemu-iotests: Test 'info block'') had a semantic merge
conflict, which results in failure for qemu-iotests case 186. Fix the
reference output to consider the changes of 70f17a1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1500973176-29235-1-git-send-email-kwolf@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test cases 030, 041 and 055 used to sleep for a second after calling
block-job-pause to make sure that the block job had time to actually
get into paused state. We can instead poll its status and use that one
second only as a timeout.
The tests also slept a second for checking that the block jobs don't
make progress while being paused. Half a second is more than enough for
this.
These changes reduce the total time for the three tests by 25 seconds on
my laptop (from 155 seconds to 130).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>