The AN524 has three MPCs: one for the BRAM, one for the QSPI flash,
and one for the DDR. We incorrectly set the .mpc field in the
RAMInfo struct for the SRAM block to 1, giving it the same MPC we are
using for the QSPI. The effect of this was that the QSPI didn't get
mapped into the system address space at all, via an MPC or otherwise,
and guest programs which tried to read from the QSPI would get a bus
error. Correct the SRAM RAMInfo to indicate that it does not have an
associated MPC.
Fixes: 25ff112a8c ("hw/arm/mps2-tz: Add new mps3-an524 board")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210409150527.15053-2-peter.maydell@linaro.org
In emulation of the CFGI_STE_RANGE command, we now take StreamID as the
start of the invalidation range, regardless of whatever the Range is,
whilst the spec clearly states that
- "Invalidation is performed for an *aligned* range of 2^(Range+1)
StreamIDs."
- "The bottom Range+1 bits of the StreamID parameter are IGNORED,
aligning the range to its size."
Take CFGI_ALL (where Range == 31) as an example, if there are some random
bits in the StreamID field, we'll fail to perform the full invalidation but
get a strange range (e.g., SMMUSIDRange={.start=1, .end=0}) instead. Rework
the emulation a bit to get rid of the discrepancy with the spec.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210402100449.528-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GSIV values in SMMUv3 IORT node are not correct as they don't match
the SMMUIrq enumeration, which describes the IRQ<->PIN mapping used by
our emulated vSMMU.
Fixes: a703b4f6c1 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210402084731.93-1-yuzenghui@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For most commands, when issuing an AIO, the BlockAIOCB is stored in the
NvmeRequest aiocb pointer when the AIO is issued. The main use of this
is cancelling AIOs when deleting submission queues (it is currently not
used for Abort).
However, some commands like Dataset Management Zone Management Send
(zone reset) may involve more than one AIO and here the AIOs are issued
without saving a reference to the BlockAIOCB. This is a problem since
nvme_del_sq() will attempt to cancel outstanding AIOs, potentially with
an invalid BlockAIOCB since the aiocb pointer is not NULL'ed when the
request structure is recycled.
Fix this by
1. making sure the aiocb pointer is NULL'ed when requests are recycled
2. only attempt to cancel the AIO if the aiocb is non-NULL
3. if any AIOs could not be cancelled, drain all aio as a last resort.
Fixes: dc04d25e2f ("hw/block/nvme: add support for the format nvm command")
Fixes: c94973288c ("hw/block/nvme: add broadcast nsid support flush command")
Fixes: e4e430b3d6 ("hw/block/nvme: add simple copy command")
Fixes: 5f5dc4c6a9 ("hw/block/nvme: zero out zones on reset")
Fixes: 2605257a26 ("hw/block/nvme: add the dataset management command")
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Cc: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_compare() fails to store the aiocb from the blk_aio_preadv() call.
Fix this.
Fixes: 0a384f923f ("hw/block/nvme: add compare command")
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_map_prp needs to calculate the number of list entries based on the
offset value. For the subsequent PRP2 list, need to ensure the number of
entries is within the MAX number of PRP entries for a page.
Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Calling qdev_get_machine() from a QOM instance_init function is
fragile because we can't be sure the machine object actually
exists. And this happens to break when passing ",help" on the
command line to get the list of properties for a CPU core
device types :
$ ./qemu-system-ppc64 -device power8_v2.0-spapr-cpu-core,help
qemu-system-ppc64: ../../hw/core/machine.c:1290:
qdev_get_machine: Assertion `machine != NULL' failed.
Aborted (core dumped)
This used to work before QEMU 5.0, but commit 3df261b667
unwillingly introduced a subtle regression : the above command
line needs to create an instance but the instance_init function
of the base class calls qdev_get_machine() before
qemu_create_machine() has been called, which is a programming bug.
Use current_machine instead. It is okay to skip the setting of
nr_thread in this case since only its type is displayed.
Fixes: 3df261b667 ("softmmu/vl.c: Handle '-cpu help' and '-device help' before 'no default machine'")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Cc: peter.maydell@linaro.org
Message-Id: <20210409160339.500167-3-groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Setting the 'fallback' property corrupts the QOM instance state
(FDCtrlSysBus) because it accesses an incorrect offset (it uses
the offset of the FDCtrlISABus state).
Cc: qemu-stable@nongnu.org
Fixes: a73275dd6f ("fdc: Add fallback option")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407133742.1680424-1-f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ccw_dstream_read/write functions returned values are sometime
not taking into account and reported back to the upper level
of interpretation of CCW instructions.
It follows that accessing an invalid address does not trigger
a subchannel status program check to the guest as it should.
Let's test the return values of ccw_dstream_write[_buf] and
ccw_dstream_read[_buf] and report it to the caller.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <1617899529-9329-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgbs4gAAoJEO8Ells5jWIRvgAIAJjpj9ptxEfEAisTeU7IMNPk
vFyf9aBj/QBPv8VmcC90Mz/x38bMn0zE6V9E53camA7s1YtLxWj5ZG9wvj0ExJB9
jgk4kEm5gpj8LY7/GwECNffaITQtLZgE4HVP98dVG9o1+5iCkZf8RnXAQH2ckzTs
WoYuM0Glgj0XXdBauvpEkidQ+q23cOw7ipxNseI5wxZBAZt0RGdXoO6Dh+S219ro
kFoDwzZS9tnuwpzzZJefQJuRWkUm1LsZ6rwC7Yd+gpk2Yt+fLGihF4dc0se2+SE1
jeq7fV1E62PvEs2GJx4hs3rqakcBDE4Bf83sZnbFKMVpuvFUh+mXcKaIfXABDi8=
=3d/N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 08 Apr 2021 10:34:24 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-win32: correctly recycle buffers
Revert "qapi: net: Add query-netdev command"
Revert "tests: Add tests for query-netdev command"
Revert "net: Move NetClientState.info_str to dynamic allocations"
Revert "hmp: Use QAPI NetdevInfo in hmp_info_network"
Revert "net: Do not fill legacy info_str for backends"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
a migration test fix.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
Fix for !linux build
-----BEGIN PGP SIGNATURE-----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=FKJ4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210407b' into staging
V2 migration+virtiofs fixes pull 2021-04-07
A seg fix in virtiofsd, a bunch of fixes for background snapshots, and
a migration test fix.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
v2
Fix for !linux build
# gpg: Signature made Wed 07 Apr 2021 18:53:13 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210407b:
tests/migration: fix parameter of auto-converge migration
migration: Rename 'bs' to 'block' in background snapshot code
migration: Pre-fault memory before starting background snasphot
migration: Inhibit virtio-balloon for the duration of background snapshot
migration: Fix missing qemu_fflush() on buffer file in bg_migration_thread
virtiofsd: Fix security.capability comparison
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
commit 59b5437eb7.
Signed-off-by: Jason Wang <jasowang@redhat.com>
nvme_subsys_ctrl() is used in contexts where the given controller
identifier is from an untrusted source. Like its friends nvme_ns() and
nvme_subsys_ns(), nvme_subsys_ctrl() should just return NULL if an
invalid identifier is given.
Fixes: 645ce1a70c ("hw/block/nvme: support namespace attachment command")
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_subsys_ns() is used in contexts where the namespace identifier is
taken from an untrusted source. Commit 3921756dee ("hw/block/nvme:
assert namespaces array indices") tried to guard against this by
introducing an assert on the namespace identifier.
This is wrong since it is perfectly valid to call the function with an
invalid namespace identifier and like nvme_ns(), nvme_subsys_ns() should
simply return NULL.
Fixes: 3921756dee ("hw/block/nvme: assert namespaces array indices")
Fixes: 94d8d6d167 ("hw/block/nvme: support allocated namespace type")
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
nvme_ns_attachment() does not verify the contents of the host-supplied
16 bit "Number of Identifiers" field in the command payload.
Make sure the value is capped at 2047 and fix the out-of-bounds read.
Fixes: 645ce1a70c ("hw/block/nvme: support namespace attachment command")
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Add missing license/copyright headers to the nvme-dif.{c,h} files.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, if a private nvme-ns device (that is, a namespace
that is not linked to a subsystem) is wired up to an nvme-subsys linked
nvme controller device, the device fails to verify that the namespace id
is unique within the subsystem. NVM Express v1.4b, Section 6.1.6 ("NSID
and Namespace Usage") states that because the device supports Namespace
Management, "NSIDs *shall* be unique within the NVM subsystem".
Additionally, prior to this patch, private namespaces are not known to
the subsystem and the namespace is considered exclusive to the
controller with which it is initially wired up to. However, this is not
the definition of a private namespace; per Section 1.6.33 ("private
namespace"), a private namespace is just a namespace that does not
support multipath I/O or namespace sharing, which means "that it is only
able to be attached to one controller at a time".
Fix this by always allocating namespaces in the subsystem (if one is
linked to the controller), regardless of the shared/private status of
the namespace. Whether or not the namespace is shareable is controlled
by a new `shared` nvme-ns parameter.
Finally, this fix allows the nvme-ns `subsys` parameter to be removed,
since the `shared` parameter now serves the purpose of attaching the
namespace to all controllers in the subsystem upon device realization.
It is invalid to have an nvme-ns namespace device with a linked
subsystem without the parent nvme controller device also being linked to
one and since the nvme-ns devices will unconditionally be "attached" (in
QEMU terms that is) to an nvme controller device through an NvmeBus, the
nvme-ns namespace device can always get a reference to the subsystem of
the controller it is explicitly (using 'bus=' parameter) or implicitly
attaching to.
Fixes: e570768566 ("hw/block/nvme: support for shared namespace in subsystem")
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
The Non-MDTS DMSRL limit must be recomputed when namespaces are
detached.
Fixes: 645ce1a70c ("hw/block/nvme: support namespace attachment command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Remove the unused BlockConf from the controller structure and remove the
noop constraint checking.
Device works just fine with both legacy drive parameter namespace and
nvme-ns namespace definitions.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
The `nvme_nsid()` function returns '-1' (FFFFFFFFh) when the given
namespace is NULL. Since FFFFFFFFh is actually a valid namespace
identifier (the "broadcast" value), change this to be '0' since that
actually *is* the invalid value.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add the missing nvme_adm_opc_str entry for the Namespace Attachment
command.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Protection Information can only be enabled if there is at least 8 bytes
of metadata.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The same thing as for incoming postcopy - we cannot deal with concurrent
RAM discards when using background snapshot feature in outgoing migration.
Fixes: 8518278a6a (migration: implementation
of background snapshot thread)
Signed-off-by: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210401092226.102804-3-andrey.gruzdev@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* ppc/e500 and arm/virt: only add valid dynamic sysbus devices to the
platform bus
* update i.mx31 maintainer list
* Revert "target/arm: Make number of counters in PMCR follow the CPU"
-----BEGIN PGP SIGNATURE-----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=f0Ad
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210406' into staging
target-arm queue:
* ppc/e500 and arm/virt: only add valid dynamic sysbus devices to the
platform bus
* update i.mx31 maintainer list
* Revert "target/arm: Make number of counters in PMCR follow the CPU"
# gpg: Signature made Tue 06 Apr 2021 13:25:54 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210406:
Remove myself as i.mx31 maintainer
Revert "target/arm: Make number of counters in PMCR follow the CPU"
hw/ppc/e500plat: Only try to add valid dynamic sysbus devices to platform bus
hw/arm/virt: Only try to add valid dynamic sysbus devices to platform bus
machine: Provide a function to check the dynamic sysbus allowlist
include/hw/boards.h: Document machine_class_allow_dynamic_sysbus_dev()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Two last minute bugfixes. They are both designed to prevent
compatibility headaches down the road.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmBsQkMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpUvUH/RPU/bvWjwcfjt0PSySslxleLLZX2ixZRWTl
Ij1+Ibl47Lxa5lI0ZMibac3Q4CC0+20pwGITX6165AXwMUxtHcUij+d6SW//ZrAv
rFOtAgpHGtL82ShwpWt73Qa/iZKAnl0GRaqs/gZJcFViUGPBZsDT1abG+OgI5EDh
l3+j+3CbwrZWqGygaVYNHbx/ZaO6+rq/RVxsQl6bNbP7XItanMj43NyhSngHtt7S
/UNSq9xAVSlVpCbkGqfNhms9ET4FwKoJgBK+FE2OFG5TqJoBYXKmUJx/9GML9R1d
2qwSAT9NCTniSX47mIHbcMgQZTXDkkWmvUhaSREASmlAjzoqAlQ=
=GXh7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: last minute bugfixes
Two last minute bugfixes. They are both designed to prevent
compatibility headaches down the road.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 06 Apr 2021 12:13:07 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-pci: compat page aligned ATS
x86: rename oem-id and oem-table-id properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 4c70875372 ("pci: advertise a page aligned ATS") advertises
the page aligned via ATS capability (RO) to unbrek recent Linux IOMMU
drivers since 5.2. But it forgot the compat the capability which
breaks the migration from old machine type:
(qemu) qemu-kvm: get_pci_config_device: Bad config data: i=0x104 read:
0 device: 20 cmask: ff wmask: 0 w1cmask:0
This patch introduces a new parameter "x-ats-page-aligned" for
virtio-pci device and turns it on for machine type which is newer than
5.1.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: 4c70875372 ("pci: advertise a page aligned ATS")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210406040330.11306-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The e500plat machine device plug callback currently calls
platform_bus_link_device() for any sysbus device. This is overly
broad, because platform_bus_link_device() will unconditionally grab
the IRQs and MMIOs of the device it is passed, whether it was
intended for the platform bus or not. Restrict hotpluggability of
sysbus devices to only those devices on the dynamic sysbus allowlist.
We were mostly getting away with this because the board creates the
platform bus as the last device it creates, and so the hotplug
callback did not do anything for all the sysbus devices created by
the board itself. However if the user plugged in a device which
itself uses a sysbus device internally we would have mishandled this
and probably asserted. An example of this is:
qemu-system-ppc64 -M ppce500 -device macio-oldworld
This isn't a sensible command because the macio-oldworld device
is really specific to the 'g3beige' machine, but we now fail
with a reasonable error message rather than asserting:
qemu-system-ppc64: Device heathrow is not supported by this machine yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20210325153310.9131-5-peter.maydell@linaro.org
The virt machine device plug callback currently calls
platform_bus_link_device() for any sysbus device. This is overly
broad, because platform_bus_link_device() will unconditionally grab
the IRQs and MMIOs of the device it is passed, whether it was
intended for the platform bus or not. Restrict hotpluggability of
sysbus devices to only those devices on the dynamic sysbus
allowlist.
We were mostly getting away with this because the board creates the
platform bus as the last device it creates, and so the hotplug
callback did not do anything for all the sysbus devices created by
the board itself. However if the user plugged in a device which
itself uses a sysbus device internally we would have mishandled this
and probably asserted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210325153310.9131-4-peter.maydell@linaro.org
Provide a new function dynamic_sysbus_dev_allowed() which checks the
per-machine list of permitted dynamic sysbus devices and returns a
boolean result indicating whether the device is allowed. We can use
this in the implementation of validate_sysbus_device(), but we will
also need it so that machine hotplug callbacks can validate devices
rather than assuming that any sysbus device might be hotpluggable
into the platform bus.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210325153310.9131-3-peter.maydell@linaro.org
The check for `n->namespace.blkconf.blk` always fails because
this is in the initialization function.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The description was originally removed in commit 578d914b26
("hw/block/nvme: align zoned.zasl with mdts") together with the removal
of the zoned.append_size_limit parameter itself.
However, it was (most likely accidentally), re-added in commit
f7dcd31885 ("hw/block/nvme: add non-mdts command size limit for verify").
Remove the description again, since the parameter it describes,
zoned.append_size_limit, no longer exists.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
After introducing non-scalar machine properties, it would be preferrable
to have a single acpitable property which includes both generic
information (such as the OEM ids) and custom tables currently
passed via -acpitable.
Do not saddle ourselves with legacy oem-id and oem-table-id
properties, instead mark them as experimental.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210402082128.13854-1-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If a device model
(a) doesn't set the value to a correct interrupt number and then
(b) triggers an interrupt for itself,
it's device model bug. Add assert on interrupt pin number to catch
this kind of bug more obviously.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <9cf8ac3b17e162daac0971d7be32deb6a33ae6ec.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
This patch adds reset ACPI PM related registers on vt82c686 reset time
and de-assert sci.
via_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset.
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <0a3fe998525552860919a690ce83dab8f663ab99.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
The function was introduced by commit
eaba51c573 (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic)
that forgot to actually call it at piix4 reset time and as result
SCI_EN wasn't set as was expected by 6be8cf56bc in acpi_only mode.
So Windows crashes when it notices that SCI_EN is not set and FADT is
not providing information about how to enable it anymore.
Reproducer:
qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso
Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time.
Occasionally this patch adds reset acpi PM related registers on
piix4 reset time and de-assert sci.
piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset. pm_reset() in ich9.c correctly calls
corresponding reset functions.
Fixes: 6be8cf56bc (acpi/core: always set SCI_EN when SMM isn't supported)
Reported-by: Reinoud Zandijk <reinoud@NetBSD.org>
Co-developed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The value is assigned later in this procedure.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-3-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1743098
This commit completes the solution of segfault in hot unplug flow
(by commit ccec7e9603).
Added missing check for vdev in virtio_pci_isr_read.
Typical stack of crash:
virtio_pci_isr_read ../hw/virtio/virtio-pci.c:1365 with proxy-vdev = 0
memory_region_read_accessor at ../softmmu/memory.c:442
access_with_adjusted_size at ../softmmu/memory.c:552
memory_region_dispatch_read1 at ../softmmu/memory.c:1420
memory_region_dispatch_read at ../softmmu/memory.c:1449
flatview_read_continue at ../softmmu/physmem.c:2822
flatview_read at ../softmmu/physmem.c:2862
address_space_read_full at ../softmmu/physmem.c:2875
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20210315115937.14286-2-yuri.benditovich@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been
finalized before the vhost-user-blk.
This happens with char-socket chardev operating in the listening mode (server).
The char-socket chardev emits "close" event at the end of finalizing when
its internal data is destroyed. This calls vhost-user-blk event handler
which in turn tries to manipulate with destroyed chardev by setting an empty
event handler for vhost-user-blk cleanup postponing.
This patch separates the shutdown case from the cleanup postponing removing
the need to set an event handler.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 4bcad76f4c ("vhost-user-blk: delay vhost_user_blk_disconnect")
introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts
because of connection problems with vhost-blk daemon.
However, it introdues a new problem. Now, any communication errors
during execution of vhost_dev_init() called by vhost_user_blk_device_realize()
lead to qemu abort on assert in vhost_dev_get_config().
This happens because vhost_user_blk_disconnect() is postponed but
it should have dropped s->connected flag by the time
vhost_user_blk_device_realize() performs a new connection opening.
On the connection opening, vhost_dev initialization in
vhost_user_blk_connect() relies on s->connection flag and
if it's not dropped, it skips vhost_dev initialization and returns
with success. Then, vhost_user_blk_device_realize()'s execution flow
goes to vhost_dev_get_config() where it's aborted on the assert.
To fix the problem this patch adds immediate cleanup on device
initialization(in vhost_user_blk_device_realize()) using different
event handlers for initialization and operation introduced in the
previous patch.
On initialization (in vhost_user_blk_device_realize()) we fully
control the initialization process. At that point, nobody can use the
device since it isn't initialized and we don't need to postpone any
cleanups, so we can do cleaup right away when there is a communication
problem with the vhost-blk daemon.
On operation we leave it as is, since the disconnect may happen when
the device is in use, so the device users may want to use vhost_dev's data
to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()).
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to use different connect/disconnect event handlers
on device initialization and operation as seen from the further
commit fixing a bug on device initialization.
This patch refactors the code to make use of them: we don't rely any
more on the VM state for choosing how to cleanup the device, instead
we explicitly use the proper event handler depending on whether
the device has been initialized.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the comment of tx_padding_and_crc() says: "Never add CRC in QEMU",
min_frame_len should excluce CRC, so it should be 60 instead of 64.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210316081505.72898-1-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_memory_unplug() is the last step of the hot unplug sequence.
It is indirectly called by:
spapr_lmb_release()
hotplug_handler_unplug()
and spapr_lmb_release() already buys us that DIMM unplug state is
present : it gets restored with spapr_recover_pending_dimm_state()
if missing.
g_assert() that spapr_pending_dimm_unplugs_find() cannot return NULL
in spapr_memory_unplug() to make this clear and silence Coverity.
Fixes: Coverity CID 1450767
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161562021166.948373.15092876234470478331.stgit@bahia.lan>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Per devicetree spec v0.3 [1] chapter 2.3.5:
The #address-cells and #size-cells properties are not inherited
from ancestors in the devicetree. They shall be explicitly defined.
If missing, a client program should assume a default value of 2
for #address-cells, and a value of 1 for #size-cells.
These properties are currently missing, causing the <reg> property
of the queue-group subnode to be incorrectly parsed using default
values.
[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.3/devicetree-specification-v0.3.pdf
Fixes: fdfb7f2cdb ("e500: Add support for eTSEC in device tree")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210311081608.66891-1-bmeng.cn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In commit 81b3ddaf87 we fixed a use of uninitialized data
in read_tcnt(). However this change wasn't enough to placate
Coverity, which is not smart enough to see that if we read a
2 bit field and then handle cases 0, 1, 2 and 3 then there cannot
be a flow of execution through the switch default. Add explicit
default cases which assert that they can't be reached, which
should help silence Coverity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210319162458.13760-1-peter.maydell@linaro.org
They were introduced in commit 9bde7f0674 ("hw/arm/smmuv3: Implement
translate callback") but never actually used. Drop them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20210325142702.790-1-yuzenghui@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>