This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed. The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the cancel callback from the USBPacket struct, move it over
to USBDeviceInfo. Zap usb_defer_packet() which is obsolete now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a usb_handle_packet function, put it into use everywhere.
Right now it just calls dev->info->handle_packet(), that will
change in future patches though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the linux usb host passthrough code use the usb_generic_handle_packet()
function, rather then the curent DYI code. This removes 200 lines of almost
identical code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This allows using the generic usb_generic_handle_packet function from
device code which does ASYNC control requests (such as the linux host
pass through code).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This is used for some devices that have multiple interfaces that form a logic
device. An example is Video Class, which has a Control interface and a
Streaming interface. There can be additional interfaces on the same (physical)
devices (e.g. a microphone), and Interface Association Descriptor handles this
case.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows allows control transfers to pass up to 4k of data, so raise our
control buffer size to 4k. For control out transfers the usb core code copies
the control request data to a buffer before calling the device's handle_control
callback. Add a check for overflowing the buffer before copying the data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Yes, seriously. There is no migration support at all for usb devices.
They loose state, especially the device address, and stop responding
because of that. Oops.
Luckily there is so much broken usb hardware out there that the guest
usually just kicks the device hard (via port reset and
reinitialization), then continues without a hitch. So we got away with
that in a surprising high number of cases.
The arrival of remote wakeup (which enables autosuspend support) changes
that picture though. The usb devices also forget that it they are
supposed to wakeup, so they don't do that. The host also doesn't notice
the device stopped working in case it suspended the device and thus
expects it waking up instead of polling it. Result is that your mouse
is dead.
Lets start fixing that. Add a vmstate struct for USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows to explictily set the physical port where you want to
plug the usb device. Example:
-device usb-tablet,bus=usb.0,port=2
With explicit port addressing qemu can and will not automagically add
USB Hubs. This means that:
(a) You can plug two devices of your choice into the two uhci
root ports.
(b) If you want plug in more that two devices you have to care
about adding a hub yourself.
Plugging a hub works this way:
-device usb-hub,bus=usb.0,port=1
Use this to add a device to the hub:
-device usb-tablet,bus=usb.0,port=1.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a path string to USBPort. Add usb_port_location() function to set
the physical location of the usb port. Update all drivers implementing
usb ports to call it. Update the monitor commands to print it. Wind it
up in qdev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for device_qualifier and other_speed_config descriptors.
These are used to query the "other speed" configuration of usb 2.0
devices, i.e. in high-speed mode they return the full-speed
configuration and visa versa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add handle_attach() callback to USBDeviceInfo which is called by the
generic package handler when the device is attached to the usb bus
(i.e. plugged into a port).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add wakeup callback to port ops for remote wakeup handling.
Also add a usb_wakeup() function for devices which want
trigger a remote wakeup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add separate detach callback to USBPortOps, split
uhci/ohci/musb/usbhub attach functions into two.
Move common code to the usb_attach() function, only
the hardware-specific bits remain in the attach/detach
callbacks.
Keep track of the port it is attached to for each usb device.
[ v3: fix tyops in usb-musb.c ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds hw/usb-desc.[ch] files. They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.
The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.
The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ports on root hub will have NULL here. This is needed to reconstruct
path from device to its root hub to build device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mass Storage Reset and Get Max LUN are class specific requests, but
they were not marked as such in hw/usb-msd.c, moved therefore
ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c
to hw/usb.h.
Furthermore there was a problem in hw/usb-ohci.c when using DEBUG
concerning systems where size_t is a 32 bit integer (printf resulted
in a segmentation fault).
Signed-off-by: Max Reitz <max@tyndur.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rebased to master, adapted to device renaming by armbru,
no other changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the qdev name for the product description makes for inconvenient
qdev names.
Put the product description in new USBDeviceInfo member product_desc.
Make usb_qdev_init() use it. No user or guest visible change, since
the value is still the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a device name, it's the USB product description string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hook up usb_msd_init.
Also rework handling of encrypted block devices,
move the code out vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a auto_attach field to USBDevice, which is enabled by default.
USB drivers can clear this field in case they do *not* want the device
being attached (i.e. plugged into a usb port) automatically after
successfull init().
Use cases (see next patches):
* attaching encrypted mass storage devices.
* -usbdevice host:...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patchs adds infrastructure to handle -usbdevice via qdev callbacks.
USBDeviceInfo gets a name field (for the -usbdevice driver name) and a
callback for -usbdevice parameter parsing.
The new usbdevice_create() function walks the qdev driver list and looks
for a usb driver with a matching name. When a parameter parsing
callback is present it is called, otherwise the device is created via
usb_create_simple().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hook into DeviceInfo->exit().
handle_destroy() must not free the state struct, this is handled
by the new usb_qdev_exit() function now.
qdev_free(usb_device) works now.
Fix usb hub to qdev_free() all connected devices on unplug.
Unplugging a usb hub works now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Currently, waiting for the user to type in some password blocks the
whole VM because monitor_readline starts its own I/O loop. And this loop
also screws up reading passwords from virtual console.
Patch below fixes the shortcomings by using normal I/O processing also
for waiting on a password. To keep to modal property for the monitor
terminal, the command handler is temporarily replaced by a password
handler and a callback infrastructure is established to process the
result before switching back to command mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6710 c046a42c-6fe2-441c-8c8c-71466251a162
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
- No monitor terminal is ready for input at this point
- Forcing all mux'ed terminals into monitor mode can confuse other
users of that channels
To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
- Prevent autostart if there is some encrypted disk
- Once the user tries to resume the VM, prompt for all missing
passwords
- Only resume if all passwords were accepted
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds support for removing USB devices by host address.
Which is usefull for things like libvirtd because there is no easy way to
find guest USB address of the host device.
In other words you can now do:
usb_add host:3.5
...
usb_del host:3.5
Before the patch 'usb_del' did not support 'host:' notation.
----
Syntax for specifying auto connect filters has been improved.
Old syntax was
host:bus.dev
host:pid:vid
New syntax is
host:auto:bus.dev[:pid:vid]
In both the cases any attribute can be set to "*".
New syntax is more flexible and lets you do things like
host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */
It's now possible to remove auto filters. For example:
usb_del host:auto:3.*:5533:*
Active filters are printed after all host devices in 'info usb' output.
Which now looks like this:
Device 1.1, speed 480 Mb/s
Hub: USB device 1d6b:0002, EHCI Host Controller
Device 1.4, speed 480 Mb/s
Class 00: USB device 1058:0704, External HDD
Auto filters:
Device 3.* ID *:*
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162
A bit better documentation of the USB device API, namely
return codes.
Rewrite of usb_generic_handle_packet() to make it more
reable and easier to follow.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5049 c046a42c-6fe2-441c-8c8c-71466251a162
QEMU can now automatically grab host USB devices that match the filter.
For now I just extended 'host:X.Y' and 'host:VID:PID' syntax to handle
wildcards. So for example if you do something like
usb_add host:5.*
QEMU will automatically grab any non-hub device with host address 5.*.
Same with the 'host:PID:*', we grab any device that matches PID.
Filtering itself is very generic so we can probably add more elaborate
syntax like 'host:BUS.ADDR:VID:PID'. So that we can do 'host:5.*:6000:*'.
Anyway, it's implemented using a periodic timer that scans host devices
and grabs those that match the filter. Timer is started when the first
filter is added.
We now keep the list of all host devices that we grabbed to make sure that
we do not grab the same device twice.
btw It's currently possible to grab the same host device more than once.
ie You can just do "usb_add host:1.1" more than once, which of course does
not work. So this patch fixes that issue too.
Along with auto disconnect patch that I send a minute ago the setup is very
seamless now. You can just allocate some usb ports to the VMs and plug/unplug
devices at any time.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5048 c046a42c-6fe2-441c-8c8c-71466251a162
I got really annoyed by the fact that you have to manually do
usb_del in the monitor when host device is unplugged and decided
to fix it :)
Basically we now automatically remove guest USB device
when the actual host device is disconnected.
At first I've extended set_fd_handlerX() stuff to support checking
for exceptions on fds. But unfortunately usbfs code does not wake up
user-space process when device is removed, which means we need a
timer to periodically check if device is still there. So I removed
fd exception stuff and implemented it with the timer.
Signed-off-by: Max Krasnyansky <maxk@kernel.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5047 c046a42c-6fe2-441c-8c8c-71466251a162