'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.
Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this CCM, i.MX25 timer is accurate with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.
IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.
For now the i.MX25 continues to use the i.MX31 CCM implementation.
An i.MX25 specific CCM will be introduced in a later patch.
We also rework initialization to stop using deprecated sysbus device init.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is to prepare for CCM code refactoring.
This is just a bit of function and enum values renaming.
We also remove some useless intermediate variables.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.
We change the CCMR reg reset value to match linux expected config.
This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.
With this change the "sleep 60" command on linux is time accurate
with "real world time".
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The device's guest interface and its QEMU user interface are
flawed^Whotly debated. We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.
To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Add support for the Xilinx XADC core used in Zynq 7000.
References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
Dual 12-Bit 1 MSPS Analog-to-Digital Converter
Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
* Changed macro names to match TRM where possible
* Made programmers model macro scheme consistent
* Dropped XADC_ZYNQ_ prefix on local macros
* Fix ALM field width
* Update threshold-comparison interrupts in _update_ints()
* factored out DFIFO pushes into helper. Renamed to "push/pop"
* Changed xadc_reg to 10 bits and added OOB check.
* Reduced scope of MCTL reset to just stop channel coms.
* Added dummy read data to write commands
* Changed _ to - seperators in string names and filenames
* Dropped ------------ in header comment
* Catchall'ed _update_ints() in _write handler.
* Minor whitespace changes.
* Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for sharing the code between timers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make sure that we also clear the data and clock interrupts at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:
Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)
Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The goal is to have debug code always compiled during build.
We standardize all debug output on the following format:
[QOM_TYPE_NAME]reporting_function: debug message
The qemu_log_mask() output is following the same format as the
above debug.
Adding some missing qemu_log_mask call for bad registers.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 293e08f31cbb4df84d58f693243e61e770c73b3a.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current ivshmem protocol uses 'long' for integers. But the
sizeof(long) depends on the host and the endianess is not defined, which
may cause portability troubles.
Instead, switch to using little-endian int64_t. This breaks the
protocol, except on x64 little-endian host where this change
should be compatible.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use irqfd for improving context switch when notifying the guest.
If the host doesn't support kvm irqfd, regular msi notifications are
still supported.
Note: the ivshmem implementation doesn't allow switching between MSI and
IO interrupts, this patch doesn't either.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The array is used to have vector specific data, so use a more
descriptive name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
No need to store an extra int for the vector number when it can be
computed easily by looking at the position in the array.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Instead of handling allocation, teach ivshmem to use a memory backend.
This allows to use hugetlbfs backed memory now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use the common qemu utility function to parse the memory size.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Remove shm_fd from device state, closing it as early as possible to avoid leaks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version. Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The interrupt mask is a state value, it should be reset, like the
interrupt status.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The number of eventfd that can be handled per peer is limited by the
number of vectors. Return an error when receiving too many of them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The terms 'guest' and 'peer' are used sometime interchangeably which may
be confusing. Instead, use 'peer' for the remote instances of ivshmem
clients, and 'guest' for the local VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Free all objects owned by the device, making sure the device is free,
fixing hot-unplug.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The server should not change the shm, and this isn't handled by qemu and
we should should verify this in qemu.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
0 is a valid fd value, so change conditions and set -1 value early
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
load_state_old() is used to keep compatibility with version 0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The common version correctly checks for 0 value case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Both if branches return, move this out to common end.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use some more explicit variables to simplify the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The server shouldn't send invalid peer id, so print an error if it's the
case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The test whether the chardev is an AF_UNIX socket rejects
"-chardev socket,id=chr0,path=/tmp/foo,server,nowait -device
ivshmem,chardev=chr0", but fails to explain why.
Use an explicit error on why a chardev may be rejected.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
max_peer isn't really useful, it tracks the maximum received VM id, but
that quickly matches nb_peers, the size of the peers array. Since VM
come and go, there might be sparse peers so it doesn't help much in
general to have this value around.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
There is no peer when device is initialized, do not let doorbell for
inexisting peer 0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
val isn't used in ivshmem_update_irq() function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
It simplifies a bit the code to allocate the array when setting the
number of peers instead of lazily when receiving the first vector.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Set the number of peers and array allocation in a single place. Rename
to better reflect the function content.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Limit the maximum number of peers to MAXUINT16. This is more realistic
and better matches the limit of the doorbell register.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Use the latest qemu device modeling API, in particular, convert to
realize to fix the error handling; right now a botched device_add
ivhsmem command kills the VM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
